@@ -18,6 +18,8 @@
#include <asm/ip32/crime.h>
#include <asm/ip32/mace.h>
+#include "ip32-common.h"
+
struct sgi_crime __iomem *crime;
struct sgi_mace __iomem *mace;
@@ -39,7 +41,7 @@ void __init crime_init(void)
id, rev, field, (unsigned long) CRIME_BASE);
}
-irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_memerr_intr(int irq, void *dev_id)
{
unsigned long stat, addr;
int fatal = 0;
@@ -90,7 +92,7 @@ irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
return IRQ_HANDLED;
}
-irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id)
{
unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK;
unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK;
@@ -18,6 +18,8 @@
#include <asm/ptrace.h>
#include <asm/tlbdebug.h>
+#include "ip32-common.h"
+
static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
{
int data = regs->cp0_cause & 4;
new file mode 100644
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __IP32_COMMON_H
+#define __IP32_COMMON_H
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+void __init crime_init(void);
+irqreturn_t crime_memerr_intr(int irq, void *dev_id);
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
+void __init ip32_be_init(void);
+void ip32_prepare_poweroff(void);
+
+#endif /* __IP32_COMMON_H */
@@ -28,6 +28,8 @@
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
+#include "ip32-common.h"
+
/* issue a PIO read to make sure no PIO writes are pending */
static inline void flush_crime_bus(void)
{
@@ -107,10 +109,6 @@ static inline void flush_mace_bus(void)
* is quite different anyway.
*/
-/* Some initial interrupts to set up */
-extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
-extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-
/*
* This is for pure CRIME interrupts - ie not MACE. The advantage?
* We get to split the register in half and do faster lookups.
@@ -15,6 +15,7 @@
#include <asm/ip32/crime.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
+#include <asm/sgialib.h>
extern void crime_init(void);
@@ -29,6 +29,8 @@
#include <asm/ip32/crime.h>
#include <asm/ip32/ip32_ints.h>
+#include "ip32-common.h"
+
#define POWERDOWN_TIMEOUT 120
/*
* Blink frequency during reboot grace period and when panicked.
@@ -26,8 +26,7 @@
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
-extern void ip32_be_init(void);
-extern void crime_init(void);
+#include "ip32-common.h"
#ifdef CONFIG_SGI_O2MACE_ETH
/*
Fix interrupt function prototypes, move all prototypes into a new file ip32-common.h and include it where needed. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- arch/mips/sgi-ip32/crime.c | 6 ++++-- arch/mips/sgi-ip32/ip32-berr.c | 2 ++ arch/mips/sgi-ip32/ip32-common.h | 15 +++++++++++++++ arch/mips/sgi-ip32/ip32-irq.c | 6 ++---- arch/mips/sgi-ip32/ip32-memory.c | 1 + arch/mips/sgi-ip32/ip32-reset.c | 2 ++ arch/mips/sgi-ip32/ip32-setup.c | 3 +-- 7 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 arch/mips/sgi-ip32/ip32-common.h