| Message ID | 20240122110446.140226-3-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 41fe9ea1696c85fdef1b0ea3f9184edb9ab7faba |
| Headers | show |
| Series | Add ITE IT5205 Passive MUX | expand |
On Mon, Jan 22, 2024 at 12:04:46PM +0100, AngeloGioacchino Del Regno wrote: > The ITE IT5202 is a USB Type-C Alternate Mode Passive MUX, used for > muxing the SBU lines of a Type-C port with DisplayPort altmode and > also providing an orientation switch. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > drivers/usb/typec/mux/Kconfig | 10 ++ > drivers/usb/typec/mux/Makefile | 1 + > drivers/usb/typec/mux/it5205.c | 294 +++++++++++++++++++++++++++++++++ > 3 files changed, 305 insertions(+) > create mode 100644 drivers/usb/typec/mux/it5205.c > > diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig > index d2cb5e733e57..399c7b0983df 100644 > --- a/drivers/usb/typec/mux/Kconfig > +++ b/drivers/usb/typec/mux/Kconfig > @@ -36,6 +36,16 @@ config TYPEC_MUX_INTEL_PMC > control the USB role switch and also the multiplexer/demultiplexer > switches used with USB Type-C Alternate Modes. > > +config TYPEC_MUX_IT5205 > + tristate "ITE IT5205 Type-C USB Alt Mode Passive MUX driver" > + depends on I2C > + select REGMAP_I2C > + help > + Driver for the ITE IT5205 Type-C USB Alternate Mode Passive MUX > + which provides support for muxing DisplayPort and sideband signals > + on a common USB Type-C connector. > + If compiled as a module, the module will be named it5205. > + > config TYPEC_MUX_NB7VPQ904M > tristate "On Semiconductor NB7VPQ904M Type-C redriver driver" > depends on I2C > diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile > index 57dc9ac6f8dc..bb96f30267af 100644 > --- a/drivers/usb/typec/mux/Makefile > +++ b/drivers/usb/typec/mux/Makefile > @@ -4,6 +4,7 @@ obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o > obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o > obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o > obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o > +obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o > obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o > obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o > obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o > diff --git a/drivers/usb/typec/mux/it5205.c b/drivers/usb/typec/mux/it5205.c > new file mode 100644 > index 000000000000..5535932e42cd > --- /dev/null > +++ b/drivers/usb/typec/mux/it5205.c > @@ -0,0 +1,294 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ITE IT5205 Type-C USB alternate mode passive mux > + * > + * Copyright (c) 2020 MediaTek Inc. > + * Copyright (c) 2024 Collabora Ltd. > + * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > + * > + */ > + > +#include <linux/delay.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > +#include <linux/usb/tcpm.h> > +#include <linux/usb/typec.h> > +#include <linux/usb/typec_dp.h> > +#include <linux/usb/typec_mux.h> > + > +#define IT5205_REG_CHIP_ID(x) (0x4 + (x)) > +#define IT5205FN_CHIP_ID 0x35323035 /* "5205" */ > + > +/* MUX power down register */ > +#define IT5205_REG_MUXPDR 0x10 > +#define IT5205_MUX_POWER_DOWN BIT(0) > + > +/* MUX control register */ > +#define IT5205_REG_MUXCR 0x11 > +#define IT5205_POLARITY_INVERTED BIT(4) > +#define IT5205_DP_USB_CTRL_MASK GENMASK(3, 0) > +#define IT5205_DP 0x0f > +#define IT5205_DP_USB 0x03 > +#define IT5205_USB 0x07 > + > +/* Vref Select Register */ > +#define IT5205_REG_VSR 0x10 > +#define IT5205_VREF_SELECT_MASK GENMASK(5, 4) > +#define IT5205_VREF_SELECT_3_3V 0x00 > +#define IT5205_VREF_SELECT_OFF 0x20 > + > +/* CSBU Over Voltage Protection Register */ > +#define IT5205_REG_CSBUOVPSR 0x1e > +#define IT5205_OVP_SELECT_MASK GENMASK(5, 4) > +#define IT5205_OVP_3_90V 0x00 > +#define IT5205_OVP_3_68V 0x10 > +#define IT5205_OVP_3_62V 0x20 > +#define IT5205_OVP_3_57V 0x30 > + > +/* CSBU Switch Register */ > +#define IT5205_REG_CSBUSR 0x22 > +#define IT5205_CSBUSR_SWITCH BIT(0) > + > +/* Interrupt Switch Register */ > +#define IT5205_REG_ISR 0x25 > +#define IT5205_ISR_CSBU_MASK BIT(4) > +#define IT5205_ISR_CSBU_OVP BIT(0) > + > +struct it5205 { > + struct i2c_client *client; > + struct regmap *regmap; > + struct typec_switch_dev *sw; > + struct typec_mux_dev *mux; > +}; > + > +static int it5205_switch_set(struct typec_switch_dev *sw, enum typec_orientation orientation) > +{ > + struct it5205 *it = typec_switch_get_drvdata(sw); > + > + switch (orientation) { > + case TYPEC_ORIENTATION_NORMAL: > + regmap_update_bits(it->regmap, IT5205_REG_MUXCR, > + IT5205_POLARITY_INVERTED, 0); > + break; > + case TYPEC_ORIENTATION_REVERSE: > + regmap_update_bits(it->regmap, IT5205_REG_MUXCR, > + IT5205_POLARITY_INVERTED, IT5205_POLARITY_INVERTED); > + break; > + case TYPEC_ORIENTATION_NONE: > + fallthrough; > + default: > + regmap_write(it->regmap, IT5205_REG_MUXCR, 0); > + break; > + } > + > + return 0; > +} > + > +static int it5205_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) > +{ > + struct it5205 *it = typec_mux_get_drvdata(mux); > + u8 val; > + > + if (state->mode >= TYPEC_STATE_MODAL && > + state->alt->svid != USB_TYPEC_DP_SID) > + return -EINVAL; > + > + switch (state->mode) { > + case TYPEC_STATE_USB: > + val = IT5205_USB; > + break; > + case TYPEC_DP_STATE_C: > + fallthrough; > + case TYPEC_DP_STATE_E: > + val = IT5205_DP; > + break; > + case TYPEC_DP_STATE_D: > + val = IT5205_DP_USB; > + break; > + case TYPEC_STATE_SAFE: > + fallthrough; > + default: > + val = 0; > + break; > + } > + > + return regmap_update_bits(it->regmap, IT5205_REG_MUXCR, > + IT5205_DP_USB_CTRL_MASK, val); > +} > + > +static irqreturn_t it5205_irq_handler(int irq, void *data) > +{ > + struct it5205 *it = data; > + int ret; > + u32 val; > + > + ret = regmap_read(it->regmap, IT5205_REG_ISR, &val); > + if (ret) > + return IRQ_NONE; > + > + if (val & IT5205_ISR_CSBU_OVP) { > + dev_warn(&it->client->dev, "Overvoltage detected!\n"); > + > + /* Reset CSBU */ > + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, > + IT5205_CSBUSR_SWITCH, 0); > + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, > + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH); > + } > + > + return IRQ_HANDLED; > +} > + > +static void it5205_enable_ovp(struct it5205 *it) > +{ > + /* Select Vref 3.3v */ > + regmap_update_bits(it->regmap, IT5205_REG_VSR, > + IT5205_VREF_SELECT_MASK, IT5205_VREF_SELECT_3_3V); > + > + /* Trigger OVP at 3.68V */ > + regmap_update_bits(it->regmap, IT5205_REG_CSBUOVPSR, > + IT5205_OVP_SELECT_MASK, IT5205_OVP_3_68V); > + > + /* Unmask OVP interrupt */ > + regmap_update_bits(it->regmap, IT5205_REG_ISR, > + IT5205_ISR_CSBU_MASK, 0); > + > + /* Enable CSBU Interrupt */ > + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, > + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH); > +} > + > +static const struct regmap_config it5205_regmap = { > + .max_register = 0x2f, > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int it5205_probe(struct i2c_client *client) > +{ > + struct typec_switch_desc sw_desc = { }; > + struct typec_mux_desc mux_desc = { }; > + struct device *dev = &client->dev; > + struct it5205 *it; > + u32 val, chipid = 0; > + int i, ret; > + > + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > + if (!it) > + return -ENOMEM; > + > + ret = devm_regulator_get_enable(dev, "vcc"); > + if (ret) > + return dev_err_probe(dev, ret, "Failed to get regulator\n"); > + > + it->client = client; > + > + it->regmap = devm_regmap_init_i2c(client, &it5205_regmap); > + if (IS_ERR(it->regmap)) > + return dev_err_probe(dev, PTR_ERR(it->regmap), > + "Failed to init regmap\n"); > + > + /* IT5205 needs a long time to power up after enabling regulator */ > + msleep(50); > + > + /* Unset poweroff bit */ > + ret = regmap_write(it->regmap, IT5205_REG_MUXPDR, 0); > + if (ret) > + return dev_err_probe(dev, ret, "Failed to set power on\n"); > + > + /* Read the 32 bits ChipID */ > + for (i = 3; i >= 0; i--) { > + ret = regmap_read(it->regmap, IT5205_REG_CHIP_ID(i), &val); > + if (ret) > + return ret; > + > + chipid |= val << (i * 8); > + } > + > + if (chipid != IT5205FN_CHIP_ID) > + return dev_err_probe(dev, -EINVAL, > + "Unknown ChipID 0x%x\n", chipid); > + > + /* Initialize as USB mode with default (non-inverted) polarity */ > + ret = regmap_write(it->regmap, IT5205_REG_MUXCR, IT5205_USB); > + if (ret) > + return dev_err_probe(dev, ret, "Cannot set mode to USB\n"); > + > + sw_desc.drvdata = it; > + sw_desc.fwnode = dev_fwnode(dev); > + sw_desc.set = it5205_switch_set; > + > + it->sw = typec_switch_register(dev, &sw_desc); > + if (IS_ERR(it->sw)) > + return dev_err_probe(dev, PTR_ERR(it->sw), > + "failed to register typec switch\n"); > + > + mux_desc.drvdata = it; > + mux_desc.fwnode = dev_fwnode(dev); > + mux_desc.set = it5205_mux_set; > + > + it->mux = typec_mux_register(dev, &mux_desc); > + if (IS_ERR(it->mux)) { > + typec_switch_unregister(it->sw); > + return dev_err_probe(dev, PTR_ERR(it->mux), > + "failed to register typec mux\n"); > + } > + > + i2c_set_clientdata(client, it); > + > + if (of_property_read_bool(dev->of_node, "ite,ovp-enable") && client->irq) { > + it5205_enable_ovp(it); > + > + ret = devm_request_threaded_irq(dev, client->irq, NULL, > + it5205_irq_handler, > + IRQF_ONESHOT, dev_name(dev), it); > + if (ret) { > + typec_mux_unregister(it->mux); > + typec_switch_unregister(it->sw); > + return dev_err_probe(dev, ret, "Failed to request irq\n"); > + } > + } > + > + return 0; > +} > + > +static void it5205_remove(struct i2c_client *client) > +{ > + struct it5205 *it = i2c_get_clientdata(client); > + > + typec_mux_unregister(it->mux); > + typec_switch_unregister(it->sw); > +} > + > +static const struct i2c_device_id it5205_table[] = { > + { "it5205" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(i2c, it5205_table); > + > +static const struct of_device_id it5205_of_table[] = { > + { .compatible = "ite,it5205" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, it5205_of_table); > + > +static struct i2c_driver it5205_driver = { > + .driver = { > + .name = "it5205", > + .of_match_table = it5205_of_table, > + }, > + .probe = it5205_probe, > + .remove = it5205_remove, > + .id_table = it5205_table, > +}; > +module_i2c_driver(it5205_driver); > + > +MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>"); > +MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>"); > +MODULE_DESCRIPTION("ITE IT5205 alternate mode passive MUX driver"); > +MODULE_LICENSE("GPL"); > -- > 2.43.0
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index d2cb5e733e57..399c7b0983df 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -36,6 +36,16 @@ config TYPEC_MUX_INTEL_PMC control the USB role switch and also the multiplexer/demultiplexer switches used with USB Type-C Alternate Modes. +config TYPEC_MUX_IT5205 + tristate "ITE IT5205 Type-C USB Alt Mode Passive MUX driver" + depends on I2C + select REGMAP_I2C + help + Driver for the ITE IT5205 Type-C USB Alternate Mode Passive MUX + which provides support for muxing DisplayPort and sideband signals + on a common USB Type-C connector. + If compiled as a module, the module will be named it5205. + config TYPEC_MUX_NB7VPQ904M tristate "On Semiconductor NB7VPQ904M Type-C redriver driver" depends on I2C diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile index 57dc9ac6f8dc..bb96f30267af 100644 --- a/drivers/usb/typec/mux/Makefile +++ b/drivers/usb/typec/mux/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o +obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o diff --git a/drivers/usb/typec/mux/it5205.c b/drivers/usb/typec/mux/it5205.c new file mode 100644 index 000000000000..5535932e42cd --- /dev/null +++ b/drivers/usb/typec/mux/it5205.c @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ITE IT5205 Type-C USB alternate mode passive mux + * + * Copyright (c) 2020 MediaTek Inc. + * Copyright (c) 2024 Collabora Ltd. + * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> + +#define IT5205_REG_CHIP_ID(x) (0x4 + (x)) +#define IT5205FN_CHIP_ID 0x35323035 /* "5205" */ + +/* MUX power down register */ +#define IT5205_REG_MUXPDR 0x10 +#define IT5205_MUX_POWER_DOWN BIT(0) + +/* MUX control register */ +#define IT5205_REG_MUXCR 0x11 +#define IT5205_POLARITY_INVERTED BIT(4) +#define IT5205_DP_USB_CTRL_MASK GENMASK(3, 0) +#define IT5205_DP 0x0f +#define IT5205_DP_USB 0x03 +#define IT5205_USB 0x07 + +/* Vref Select Register */ +#define IT5205_REG_VSR 0x10 +#define IT5205_VREF_SELECT_MASK GENMASK(5, 4) +#define IT5205_VREF_SELECT_3_3V 0x00 +#define IT5205_VREF_SELECT_OFF 0x20 + +/* CSBU Over Voltage Protection Register */ +#define IT5205_REG_CSBUOVPSR 0x1e +#define IT5205_OVP_SELECT_MASK GENMASK(5, 4) +#define IT5205_OVP_3_90V 0x00 +#define IT5205_OVP_3_68V 0x10 +#define IT5205_OVP_3_62V 0x20 +#define IT5205_OVP_3_57V 0x30 + +/* CSBU Switch Register */ +#define IT5205_REG_CSBUSR 0x22 +#define IT5205_CSBUSR_SWITCH BIT(0) + +/* Interrupt Switch Register */ +#define IT5205_REG_ISR 0x25 +#define IT5205_ISR_CSBU_MASK BIT(4) +#define IT5205_ISR_CSBU_OVP BIT(0) + +struct it5205 { + struct i2c_client *client; + struct regmap *regmap; + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; +}; + +static int it5205_switch_set(struct typec_switch_dev *sw, enum typec_orientation orientation) +{ + struct it5205 *it = typec_switch_get_drvdata(sw); + + switch (orientation) { + case TYPEC_ORIENTATION_NORMAL: + regmap_update_bits(it->regmap, IT5205_REG_MUXCR, + IT5205_POLARITY_INVERTED, 0); + break; + case TYPEC_ORIENTATION_REVERSE: + regmap_update_bits(it->regmap, IT5205_REG_MUXCR, + IT5205_POLARITY_INVERTED, IT5205_POLARITY_INVERTED); + break; + case TYPEC_ORIENTATION_NONE: + fallthrough; + default: + regmap_write(it->regmap, IT5205_REG_MUXCR, 0); + break; + } + + return 0; +} + +static int it5205_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) +{ + struct it5205 *it = typec_mux_get_drvdata(mux); + u8 val; + + if (state->mode >= TYPEC_STATE_MODAL && + state->alt->svid != USB_TYPEC_DP_SID) + return -EINVAL; + + switch (state->mode) { + case TYPEC_STATE_USB: + val = IT5205_USB; + break; + case TYPEC_DP_STATE_C: + fallthrough; + case TYPEC_DP_STATE_E: + val = IT5205_DP; + break; + case TYPEC_DP_STATE_D: + val = IT5205_DP_USB; + break; + case TYPEC_STATE_SAFE: + fallthrough; + default: + val = 0; + break; + } + + return regmap_update_bits(it->regmap, IT5205_REG_MUXCR, + IT5205_DP_USB_CTRL_MASK, val); +} + +static irqreturn_t it5205_irq_handler(int irq, void *data) +{ + struct it5205 *it = data; + int ret; + u32 val; + + ret = regmap_read(it->regmap, IT5205_REG_ISR, &val); + if (ret) + return IRQ_NONE; + + if (val & IT5205_ISR_CSBU_OVP) { + dev_warn(&it->client->dev, "Overvoltage detected!\n"); + + /* Reset CSBU */ + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, + IT5205_CSBUSR_SWITCH, 0); + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH); + } + + return IRQ_HANDLED; +} + +static void it5205_enable_ovp(struct it5205 *it) +{ + /* Select Vref 3.3v */ + regmap_update_bits(it->regmap, IT5205_REG_VSR, + IT5205_VREF_SELECT_MASK, IT5205_VREF_SELECT_3_3V); + + /* Trigger OVP at 3.68V */ + regmap_update_bits(it->regmap, IT5205_REG_CSBUOVPSR, + IT5205_OVP_SELECT_MASK, IT5205_OVP_3_68V); + + /* Unmask OVP interrupt */ + regmap_update_bits(it->regmap, IT5205_REG_ISR, + IT5205_ISR_CSBU_MASK, 0); + + /* Enable CSBU Interrupt */ + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH); +} + +static const struct regmap_config it5205_regmap = { + .max_register = 0x2f, + .reg_bits = 8, + .val_bits = 8, +}; + +static int it5205_probe(struct i2c_client *client) +{ + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + struct device *dev = &client->dev; + struct it5205 *it; + u32 val, chipid = 0; + int i, ret; + + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); + if (!it) + return -ENOMEM; + + ret = devm_regulator_get_enable(dev, "vcc"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulator\n"); + + it->client = client; + + it->regmap = devm_regmap_init_i2c(client, &it5205_regmap); + if (IS_ERR(it->regmap)) + return dev_err_probe(dev, PTR_ERR(it->regmap), + "Failed to init regmap\n"); + + /* IT5205 needs a long time to power up after enabling regulator */ + msleep(50); + + /* Unset poweroff bit */ + ret = regmap_write(it->regmap, IT5205_REG_MUXPDR, 0); + if (ret) + return dev_err_probe(dev, ret, "Failed to set power on\n"); + + /* Read the 32 bits ChipID */ + for (i = 3; i >= 0; i--) { + ret = regmap_read(it->regmap, IT5205_REG_CHIP_ID(i), &val); + if (ret) + return ret; + + chipid |= val << (i * 8); + } + + if (chipid != IT5205FN_CHIP_ID) + return dev_err_probe(dev, -EINVAL, + "Unknown ChipID 0x%x\n", chipid); + + /* Initialize as USB mode with default (non-inverted) polarity */ + ret = regmap_write(it->regmap, IT5205_REG_MUXCR, IT5205_USB); + if (ret) + return dev_err_probe(dev, ret, "Cannot set mode to USB\n"); + + sw_desc.drvdata = it; + sw_desc.fwnode = dev_fwnode(dev); + sw_desc.set = it5205_switch_set; + + it->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(it->sw)) + return dev_err_probe(dev, PTR_ERR(it->sw), + "failed to register typec switch\n"); + + mux_desc.drvdata = it; + mux_desc.fwnode = dev_fwnode(dev); + mux_desc.set = it5205_mux_set; + + it->mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(it->mux)) { + typec_switch_unregister(it->sw); + return dev_err_probe(dev, PTR_ERR(it->mux), + "failed to register typec mux\n"); + } + + i2c_set_clientdata(client, it); + + if (of_property_read_bool(dev->of_node, "ite,ovp-enable") && client->irq) { + it5205_enable_ovp(it); + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + it5205_irq_handler, + IRQF_ONESHOT, dev_name(dev), it); + if (ret) { + typec_mux_unregister(it->mux); + typec_switch_unregister(it->sw); + return dev_err_probe(dev, ret, "Failed to request irq\n"); + } + } + + return 0; +} + +static void it5205_remove(struct i2c_client *client) +{ + struct it5205 *it = i2c_get_clientdata(client); + + typec_mux_unregister(it->mux); + typec_switch_unregister(it->sw); +} + +static const struct i2c_device_id it5205_table[] = { + { "it5205" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, it5205_table); + +static const struct of_device_id it5205_of_table[] = { + { .compatible = "ite,it5205" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, it5205_of_table); + +static struct i2c_driver it5205_driver = { + .driver = { + .name = "it5205", + .of_match_table = it5205_of_table, + }, + .probe = it5205_probe, + .remove = it5205_remove, + .id_table = it5205_table, +}; +module_i2c_driver(it5205_driver); + +MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>"); +MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>"); +MODULE_DESCRIPTION("ITE IT5205 alternate mode passive MUX driver"); +MODULE_LICENSE("GPL");