| Message ID | 20231107180907.553451-6-nifan.cxl@gmail.com |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Enabling DCD emulation support in Qemu | expand |
On Tue, 7 Nov 2023 10:07:09 -0800 nifan.cxl@gmail.com wrote: > From: Fan Ni <fan.ni@samsung.com> > > Add (file/memory backed) host backend, all the dynamic capacity regions > will share a single, large enough host backend. Set up address space for > DC regions to support read/write operations to dynamic capacity for DCD. > > With the change, following supports are added: > 1. Add a new property to type3 device "nonvolatile-dc-memdev" to point to host > memory backend for dynamic capacity. Currently, all dc regions share one > one host backend. > 2. Add namespace for dynamic capacity for read/write support; > 3. Create cdat entries for each dynamic capacity region; > 4. Fix dvsec range registers to include DC regions. > > Signed-off-by: Fan Ni <fan.ni@samsung.com> Some minor comments inline, mostly suggesting pulling refactors out before you do the new stuff. Thanks, Jonathan > --- > hw/cxl/cxl-mailbox-utils.c | 16 ++- > hw/mem/cxl_type3.c | 198 +++++++++++++++++++++++++++++------- > include/hw/cxl/cxl_device.h | 4 + > 3 files changed, 179 insertions(+), 39 deletions(-) > > > diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c > index 2d67d2015c..152a51306d 100644 > --- a/hw/mem/cxl_type3.c > +++ b/hw/mem/cxl_type3.c > @@ -31,6 +31,7 @@ > #include "hw/pci/spdm.h" > > #define DWORD_BYTE 4 > +#define CXL_CAPACITY_MULTIPLIER (256 * MiB) > > /* Default CDAT entries for a memory region */ > enum { > @@ -44,8 +45,9 @@ enum { > }; > > static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, > - int dsmad_handle, MemoryRegion *mr, > - bool is_pmem, uint64_t dpa_base) > + int dsmad_handle, uint64_t size, > + bool is_pmem, bool is_dynamic, > + uint64_t dpa_base) > { > g_autofree CDATDsmas *dsmas = NULL; > g_autofree CDATDslbis *dslbis0 = NULL; > @@ -64,9 +66,10 @@ static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, > .length = sizeof(*dsmas), > }, > .DSMADhandle = dsmad_handle, > - .flags = is_pmem ? CDAT_DSMAS_FLAG_NV : 0, > + .flags = (is_pmem ? CDAT_DSMAS_FLAG_NV : 0) | > + (is_dynamic ? CDAT_DSMAS_FLAG_DYNAMIC_CAP : 0), > .DPA_base = dpa_base, > - .DPA_length = memory_region_size(mr), > + .DPA_length = size, > }; > > /* For now, no memory side cache, plausiblish numbers */ > @@ -150,7 +153,7 @@ static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, > */ > .EFI_memory_type_attr = is_pmem ? 2 : 1, > .DPA_offset = 0, > - .DPA_length = memory_region_size(mr), > + .DPA_length = size, > }; Might be better to make the change to this function as a precursor patch before you introduce the new users. Will separate the DC bits out from the rest. > > /* Header always at start of structure */ > @@ -169,21 +172,28 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) > g_autofree CDATSubHeader **table = NULL; > CXLType3Dev *ct3d = priv; > MemoryRegion *volatile_mr = NULL, *nonvolatile_mr = NULL; > + MemoryRegion *dc_mr = NULL; > int dsmad_handle = 0; > int cur_ent = 0; > int len = 0; > int rc, i; > + uint64_t vmr_size = 0, pmr_size = 0; Put these next to the memory region definitions above given they are referring to the same regions. > > - if (!ct3d->hostpmem && !ct3d->hostvmem) { > + if (!ct3d->hostpmem && !ct3d->hostvmem && !ct3d->dc.num_regions) { > return 0; > } > > + if (ct3d->hostpmem && ct3d->hostvmem && ct3d->dc.host_dc) { > + warn_report("The device has static ram and pmem and dynamic capacity"); This is the whole how many DVSEC ranges question? I hope we resolved that so we don't care about this... > + } > + > if (ct3d->hostvmem) { > volatile_mr = host_memory_backend_get_memory(ct3d->hostvmem); > if (!volatile_mr) { > return -EINVAL; > } > len += CT3_CDAT_NUM_ENTRIES; > + vmr_size = memory_region_size(volatile_mr); > } > > if (ct3d->hostpmem) { .... > @@ -210,14 +233,38 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) > } > > if (nonvolatile_mr) { > - uint64_t base = volatile_mr ? memory_region_size(volatile_mr) : 0; > rc = ct3_build_cdat_entries_for_mr(&(table[cur_ent]), dsmad_handle++, > - nonvolatile_mr, true, base); > + pmr_size, true, false, vmr_size); > if (rc < 0) { > goto error_cleanup; > } > cur_ent += CT3_CDAT_NUM_ENTRIES; > } > + > + if (dc_mr) { > + uint64_t region_base = vmr_size + pmr_size; > + > + /* > + * Currently we create cdat entries for each region, should we only > + * create dsmas table instead?? We want the whole set. Need multiple DSMAS for the flags. SLBIS refer to DSMAS to identify which memory they cover + they may well be different for different regions (could be different types of memory). DSEMTS also by DSMAS handle so we need those as well > + * We assume all dc regions are non-volatile for now. As expressed below. I'd really prefer them to start as volatile and we can consider non volatile later. > + * > + */ > + for (i = 0; i < ct3d->dc.num_regions; i++) { > + rc = ct3_build_cdat_entries_for_mr(&(table[cur_ent]), > + dsmad_handle++, > + ct3d->dc.regions[i].len, > + true, true, region_base); > + if (rc < 0) { > + goto error_cleanup; > + } > + ct3d->dc.regions[i].dsmadhandle = dsmad_handle - 1; > + > + cur_ent += CT3_CDAT_NUM_ENTRIES; > + region_base += ct3d->dc.regions[i].len; > + } > + } > + > assert(len == cur_ent); > > *cdat_table = g_steal_pointer(&table); > @@ -445,11 +492,24 @@ static void build_dvsecs(CXLType3Dev *ct3d) > range2_size_hi = ct3d->hostpmem->size >> 32; > range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > (ct3d->hostpmem->size & 0xF0000000); > + } else if (ct3d->dc.host_dc) { > + range2_size_hi = ct3d->dc.host_dc->size >> 32; > + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > + (ct3d->dc.host_dc->size & 0xF0000000); I've forgotten if we came to a conclusion on whether these should include DC or not... My gut feeling is no because we don't know what to do if they are both already in use. > } > - } else { > + } else if (ct3d->hostpmem) { > range1_size_hi = ct3d->hostpmem->size >> 32; > range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | > (ct3d->hostpmem->size & 0xF0000000); > + if (ct3d->dc.host_dc) { > + range2_size_hi = ct3d->dc.host_dc->size >> 32; > + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > + (ct3d->dc.host_dc->size & 0xF0000000); > + } > + } else { > + range1_size_hi = ct3d->dc.host_dc->size >> 32; > + range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | > + (ct3d->dc.host_dc->size & 0xF0000000); > } > > dvsec = (uint8_t *)&(CXLDVSECDevice){ > @@ -721,6 +781,9 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, > } > } > > +/* > + * TODO: region parameters are hard coded, may need to change in the future. Agreed :) We should look at this fairly soon I think, though as long as we keep option of defaults that fall back to what we have here we can do most of it later. However I would like the defaults to be derived from the memory backend size. > + */ > static int cxl_create_dc_regions(CXLType3Dev *ct3d) > { > int i; > @@ -736,6 +799,7 @@ static int cxl_create_dc_regions(CXLType3Dev *ct3d) > if (ct3d->hostpmem) { > region_base += ct3d->hostpmem->size; > } > + Should be pushed back to the original patch. > for (i = 0; i < ct3d->dc.num_regions; i++) { > region = &ct3d->dc.regions[i]; > region->base = region_base; > @@ -823,6 +888,50 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) > return false; > } > > + ct3d->dc.total_capacity = 0; > + if (ct3d->dc.host_dc) { This confuses me a little. Can we create DC regions without a memory backend? I don't think we should allow that - in which case the earlier cxl_create_dc_regions() can move under this check. > + MemoryRegion *dc_mr; > + char *dc_name; > + uint64_t total_region_size = 0; > + int i; > + > + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); > + if (!dc_mr) { > + error_setg(errp, "dynamic capacity must have backing device"); > + return false; > + } > + /* FIXME: set dc as nonvolatile for now */ As that's less likely to occur than volatile I'd prefer a default of volatile. > + memory_region_set_nonvolatile(dc_mr, true); > + memory_region_set_enabled(dc_mr, true); > + host_memory_backend_set_mapped(ct3d->dc.host_dc, true); > + if (ds->id) { > + dc_name = g_strdup_printf("cxl-dcd-dpa-dc-space:%s", ds->id); > + } else { > + dc_name = g_strdup("cxl-dcd-dpa-dc-space"); > + } > + address_space_init(&ct3d->dc.host_dc_as, dc_mr, dc_name); > + g_free(dc_name); > + > + for (i = 0; i < ct3d->dc.num_regions; i++) { > + total_region_size += ct3d->dc.regions[i].len; > + } > + /* Make sure the host backend is large enough to cover all dc range */ I suppose this is another reasonable way of doing region defaults. Just refuse them if your defaults don't fit in the provided memory backend. We can work with that as long as we cycle back around to regions we can configure from the command line fairly soon. > + if (total_region_size > memory_region_size(dc_mr)) { > + error_setg(errp, > + "too small host backend size, increase to %lu MiB or more", > + total_region_size / MiB); > + return false; > + } > + > + if (dc_mr->size % CXL_CAPACITY_MULTIPLIER != 0) { > + error_setg(errp, "DC region size is unaligned to %lx", > + CXL_CAPACITY_MULTIPLIER); > + return false; > + } > + > + ct3d->dc.total_capacity = total_region_size; > + } > + > return true; > } > @@ -1025,16 +1140,24 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, > AddressSpace **as, > uint64_t *dpa_offset) > { > > @@ -1042,19 +1165,18 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, > return -EINVAL; > } > > - if (*dpa_offset > ct3d->cxl_dstate.static_mem_size) { > + if (*dpa_offset >= vmr_size + pmr_size + dc_size) { > return -EINVAL; > } > > - if (vmr) { > - if (*dpa_offset < memory_region_size(vmr)) { > - *as = &ct3d->hostvmem_as; > - } else { > - *as = &ct3d->hostpmem_as; > - *dpa_offset -= memory_region_size(vmr); > - } > - } else { > + if (*dpa_offset < vmr_size) { > + *as = &ct3d->hostvmem_as; > + } else if (*dpa_offset < vmr_size + pmr_size) { > *as = &ct3d->hostpmem_as; > + *dpa_offset -= vmr_size; > + } else { > + *as = &ct3d->dc.host_dc_as; > + *dpa_offset -= (vmr_size + pmr_size); > } This code is duplicated below. As a follow up perhaps we should add a utility function to get the as and offset within that space. > return 0; > @@ -1143,6 +1265,8 @@ static Property ct3_props[] = { > DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename), > DEFINE_PROP_UINT16("spdm", CXLType3Dev, spdm_port, 0), > DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0), > + DEFINE_PROP_LINK("nonvolatile-dc-memdev", CXLType3Dev, dc.host_dc, > + TYPE_MEMORY_BACKEND, HostMemoryBackend *), > DEFINE_PROP_END_OF_LIST(), > }; > > @@ -1209,33 +1333,39 @@ static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size, > > static bool set_cacheline(CXLType3Dev *ct3d, uint64_t dpa_offset, uint8_t *data) > { > - MemoryRegion *vmr = NULL, *pmr = NULL; > + MemoryRegion *vmr = NULL, *pmr = NULL, *dc_mr = NULL; > AddressSpace *as; > + uint64_t vmr_size = 0, pmr_size = 0, dc_size = 0; > > if (ct3d->hostvmem) { > vmr = host_memory_backend_get_memory(ct3d->hostvmem); > + vmr_size = memory_region_size(vmr); > } > if (ct3d->hostpmem) { > pmr = host_memory_backend_get_memory(ct3d->hostpmem); > + pmr_size = memory_region_size(pmr); > } > + if (ct3d->dc.host_dc) { > + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); > + dc_size = ct3d->dc.total_capacity; > + } > > - if (!vmr && !pmr) { > + if (!vmr && !pmr && !dc_mr) { > return false; > } > > - if (dpa_offset + CXL_CACHE_LINE_SIZE > ct3d->cxl_dstate.static_mem_size) { > + if (dpa_offset + CXL_CACHE_LINE_SIZE > vmr_size + pmr_size + dc_size) { > return false; > } > > - if (vmr) { > - if (dpa_offset < memory_region_size(vmr)) { > - as = &ct3d->hostvmem_as; > - } else { > - as = &ct3d->hostpmem_as; > - dpa_offset -= memory_region_size(vmr); > - } > - } else { > + if (dpa_offset < vmr_size) { > + as = &ct3d->hostvmem_as; > + } else if (dpa_offset < vmr_size + pmr_size) { > as = &ct3d->hostpmem_as; > + dpa_offset -= vmr_size; > + } else { > + as = &ct3d->dc.host_dc_as; > + dpa_offset -= (vmr_size + pmr_size); > } > > address_space_write(as, dpa_offset, MEMTXATTRS_UNSPECIFIED, &data,
On Wed, Jan 24, 2024 at 03:47:21PM +0000, Jonathan Cameron wrote: > On Tue, 7 Nov 2023 10:07:09 -0800 > nifan.cxl@gmail.com wrote: > > > From: Fan Ni <fan.ni@samsung.com> > > > > Add (file/memory backed) host backend, all the dynamic capacity regions > > will share a single, large enough host backend. Set up address space for > > DC regions to support read/write operations to dynamic capacity for DCD. > > > > With the change, following supports are added: > > 1. Add a new property to type3 device "nonvolatile-dc-memdev" to point to host > > memory backend for dynamic capacity. Currently, all dc regions share one > > one host backend. > > 2. Add namespace for dynamic capacity for read/write support; > > 3. Create cdat entries for each dynamic capacity region; > > 4. Fix dvsec range registers to include DC regions. > > > > Signed-off-by: Fan Ni <fan.ni@samsung.com> > Some minor comments inline, mostly suggesting pulling refactors out before > you do the new stuff. > > Thanks, > > Jonathan Hi Jonathan, One question about DVSEC setting inline. Please search ""QUESTION:" > > > --- > > hw/cxl/cxl-mailbox-utils.c | 16 ++- > > hw/mem/cxl_type3.c | 198 +++++++++++++++++++++++++++++------- > > include/hw/cxl/cxl_device.h | 4 + > > 3 files changed, 179 insertions(+), 39 deletions(-) > > > > > > > > > diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c > > index 2d67d2015c..152a51306d 100644 > > --- a/hw/mem/cxl_type3.c > > +++ b/hw/mem/cxl_type3.c > > @@ -31,6 +31,7 @@ > > #include "hw/pci/spdm.h" > > > > #define DWORD_BYTE 4 > > +#define CXL_CAPACITY_MULTIPLIER (256 * MiB) > > > > /* Default CDAT entries for a memory region */ > > enum { > > @@ -44,8 +45,9 @@ enum { > > }; > > > > static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, > > - int dsmad_handle, MemoryRegion *mr, > > - bool is_pmem, uint64_t dpa_base) > > + int dsmad_handle, uint64_t size, > > + bool is_pmem, bool is_dynamic, > > + uint64_t dpa_base) > > { > > g_autofree CDATDsmas *dsmas = NULL; > > g_autofree CDATDslbis *dslbis0 = NULL; > > @@ -64,9 +66,10 @@ static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, > > .length = sizeof(*dsmas), > > }, > > .DSMADhandle = dsmad_handle, > > - .flags = is_pmem ? CDAT_DSMAS_FLAG_NV : 0, > > + .flags = (is_pmem ? CDAT_DSMAS_FLAG_NV : 0) | > > + (is_dynamic ? CDAT_DSMAS_FLAG_DYNAMIC_CAP : 0), > > .DPA_base = dpa_base, > > - .DPA_length = memory_region_size(mr), > > + .DPA_length = size, > > }; > > > > /* For now, no memory side cache, plausiblish numbers */ > > @@ -150,7 +153,7 @@ static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, > > */ > > .EFI_memory_type_attr = is_pmem ? 2 : 1, > > .DPA_offset = 0, > > - .DPA_length = memory_region_size(mr), > > + .DPA_length = size, > > }; > > Might be better to make the change to this function as a precursor patch before > you introduce the new users. Will separate the DC bits out from the rest. > > > > > /* Header always at start of structure */ > > @@ -169,21 +172,28 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) > > g_autofree CDATSubHeader **table = NULL; > > CXLType3Dev *ct3d = priv; > > MemoryRegion *volatile_mr = NULL, *nonvolatile_mr = NULL; > > + MemoryRegion *dc_mr = NULL; > > int dsmad_handle = 0; > > int cur_ent = 0; > > int len = 0; > > int rc, i; > > + uint64_t vmr_size = 0, pmr_size = 0; > > Put these next to the memory region definitions above given they are referring to the > same regions. > > > > > - if (!ct3d->hostpmem && !ct3d->hostvmem) { > > + if (!ct3d->hostpmem && !ct3d->hostvmem && !ct3d->dc.num_regions) { > > return 0; > > } > > > > + if (ct3d->hostpmem && ct3d->hostvmem && ct3d->dc.host_dc) { > > + warn_report("The device has static ram and pmem and dynamic capacity"); > > This is the whole how many DVSEC ranges question? > I hope we resolved that so we don't care about this... > > > + } > > + > > if (ct3d->hostvmem) { > > volatile_mr = host_memory_backend_get_memory(ct3d->hostvmem); > > if (!volatile_mr) { > > return -EINVAL; > > } > > len += CT3_CDAT_NUM_ENTRIES; > > + vmr_size = memory_region_size(volatile_mr); > > } > > > > if (ct3d->hostpmem) { > > .... > > > @@ -210,14 +233,38 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) > > } > > > > if (nonvolatile_mr) { > > - uint64_t base = volatile_mr ? memory_region_size(volatile_mr) : 0; > > rc = ct3_build_cdat_entries_for_mr(&(table[cur_ent]), dsmad_handle++, > > - nonvolatile_mr, true, base); > > + pmr_size, true, false, vmr_size); > > if (rc < 0) { > > goto error_cleanup; > > } > > cur_ent += CT3_CDAT_NUM_ENTRIES; > > } > > + > > + if (dc_mr) { > > + uint64_t region_base = vmr_size + pmr_size; > > + > > + /* > > + * Currently we create cdat entries for each region, should we only > > + * create dsmas table instead?? > > We want the whole set. Need multiple DSMAS for the flags. > SLBIS refer to DSMAS to identify which memory they cover + they may well be > different for different regions (could be different types of memory). > DSEMTS also by DSMAS handle so we need those as well > > > > + * We assume all dc regions are non-volatile for now. > > As expressed below. I'd really prefer them to start as volatile and we can > consider non volatile later. > > > + * > > + */ > > + for (i = 0; i < ct3d->dc.num_regions; i++) { > > + rc = ct3_build_cdat_entries_for_mr(&(table[cur_ent]), > > + dsmad_handle++, > > + ct3d->dc.regions[i].len, > > + true, true, region_base); > > + if (rc < 0) { > > + goto error_cleanup; > > + } > > + ct3d->dc.regions[i].dsmadhandle = dsmad_handle - 1; > > + > > + cur_ent += CT3_CDAT_NUM_ENTRIES; > > + region_base += ct3d->dc.regions[i].len; > > + } > > + } > > + > > assert(len == cur_ent); > > > > *cdat_table = g_steal_pointer(&table); > > @@ -445,11 +492,24 @@ static void build_dvsecs(CXLType3Dev *ct3d) > > range2_size_hi = ct3d->hostpmem->size >> 32; > > range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > (ct3d->hostpmem->size & 0xF0000000); > > + } else if (ct3d->dc.host_dc) { > > + range2_size_hi = ct3d->dc.host_dc->size >> 32; > > + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > + (ct3d->dc.host_dc->size & 0xF0000000); > > I've forgotten if we came to a conclusion on whether these should include > DC or not... My gut feeling is no because we don't know what to do > if they are both already in use. > QUESTION: If we do not include DC, and there is no static ram/pmem capacity and only dynamic capacity, then the range registers will not be set, is that what we want? Fan > > } > > - } else { > > + } else if (ct3d->hostpmem) { > > range1_size_hi = ct3d->hostpmem->size >> 32; > > range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > (ct3d->hostpmem->size & 0xF0000000); > > + if (ct3d->dc.host_dc) { > > + range2_size_hi = ct3d->dc.host_dc->size >> 32; > > + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > + (ct3d->dc.host_dc->size & 0xF0000000); > > + } > > + } else { > > + range1_size_hi = ct3d->dc.host_dc->size >> 32; > > + range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > + (ct3d->dc.host_dc->size & 0xF0000000); > > } > > > > dvsec = (uint8_t *)&(CXLDVSECDevice){ > > @@ -721,6 +781,9 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, > > } > > } > > > > +/* > > + * TODO: region parameters are hard coded, may need to change in the future. > > Agreed :) We should look at this fairly soon I think, though as > long as we keep option of defaults that fall back to what we have here > we can do most of it later. However I would like the defaults to be derived > from the memory backend size. > > > + */ > > static int cxl_create_dc_regions(CXLType3Dev *ct3d) > > { > > int i; > > @@ -736,6 +799,7 @@ static int cxl_create_dc_regions(CXLType3Dev *ct3d) > > if (ct3d->hostpmem) { > > region_base += ct3d->hostpmem->size; > > } > > + > > Should be pushed back to the original patch. > > > for (i = 0; i < ct3d->dc.num_regions; i++) { > > region = &ct3d->dc.regions[i]; > > region->base = region_base; > > > @@ -823,6 +888,50 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) > > return false; > > } > > > > + ct3d->dc.total_capacity = 0; > > + if (ct3d->dc.host_dc) { > > This confuses me a little. Can we create DC regions without a memory backend? > I don't think we should allow that - in which case the earlier > cxl_create_dc_regions() can move under this check. > > > + MemoryRegion *dc_mr; > > + char *dc_name; > > + uint64_t total_region_size = 0; > > + int i; > > + > > + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); > > + if (!dc_mr) { > > + error_setg(errp, "dynamic capacity must have backing device"); > > + return false; > > + } > > + /* FIXME: set dc as nonvolatile for now */ > > As that's less likely to occur than volatile I'd prefer a default of volatile. > > > + memory_region_set_nonvolatile(dc_mr, true); > > + memory_region_set_enabled(dc_mr, true); > > + host_memory_backend_set_mapped(ct3d->dc.host_dc, true); > > + if (ds->id) { > > + dc_name = g_strdup_printf("cxl-dcd-dpa-dc-space:%s", ds->id); > > + } else { > > + dc_name = g_strdup("cxl-dcd-dpa-dc-space"); > > + } > > + address_space_init(&ct3d->dc.host_dc_as, dc_mr, dc_name); > > + g_free(dc_name); > > + > > + for (i = 0; i < ct3d->dc.num_regions; i++) { > > + total_region_size += ct3d->dc.regions[i].len; > > + } > > + /* Make sure the host backend is large enough to cover all dc range */ > > I suppose this is another reasonable way of doing region defaults. Just refuse > them if your defaults don't fit in the provided memory backend. > We can work with that as long as we cycle back around to regions we can > configure from the command line fairly soon. > > > + if (total_region_size > memory_region_size(dc_mr)) { > > + error_setg(errp, > > + "too small host backend size, increase to %lu MiB or more", > > + total_region_size / MiB); > > + return false; > > + } > > + > > + if (dc_mr->size % CXL_CAPACITY_MULTIPLIER != 0) { > > + error_setg(errp, "DC region size is unaligned to %lx", > > + CXL_CAPACITY_MULTIPLIER); > > + return false; > > + } > > + > > + ct3d->dc.total_capacity = total_region_size; > > + } > > + > > return true; > > } > > > > @@ -1025,16 +1140,24 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, > > AddressSpace **as, > > uint64_t *dpa_offset) > > { > > > > > @@ -1042,19 +1165,18 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, > > return -EINVAL; > > } > > > > - if (*dpa_offset > ct3d->cxl_dstate.static_mem_size) { > > + if (*dpa_offset >= vmr_size + pmr_size + dc_size) { > > return -EINVAL; > > } > > > > - if (vmr) { > > - if (*dpa_offset < memory_region_size(vmr)) { > > - *as = &ct3d->hostvmem_as; > > - } else { > > - *as = &ct3d->hostpmem_as; > > - *dpa_offset -= memory_region_size(vmr); > > - } > > - } else { > > + if (*dpa_offset < vmr_size) { > > + *as = &ct3d->hostvmem_as; > > + } else if (*dpa_offset < vmr_size + pmr_size) { > > *as = &ct3d->hostpmem_as; > > + *dpa_offset -= vmr_size; > > + } else { > > + *as = &ct3d->dc.host_dc_as; > > + *dpa_offset -= (vmr_size + pmr_size); > > } > > This code is duplicated below. As a follow up perhaps we should > add a utility function to get the as and offset within that space. > > > return 0; > > @@ -1143,6 +1265,8 @@ static Property ct3_props[] = { > > DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename), > > DEFINE_PROP_UINT16("spdm", CXLType3Dev, spdm_port, 0), > > DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0), > > + DEFINE_PROP_LINK("nonvolatile-dc-memdev", CXLType3Dev, dc.host_dc, > > + TYPE_MEMORY_BACKEND, HostMemoryBackend *), > > DEFINE_PROP_END_OF_LIST(), > > }; > > > > @@ -1209,33 +1333,39 @@ static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size, > > > > static bool set_cacheline(CXLType3Dev *ct3d, uint64_t dpa_offset, uint8_t *data) > > { > > - MemoryRegion *vmr = NULL, *pmr = NULL; > > + MemoryRegion *vmr = NULL, *pmr = NULL, *dc_mr = NULL; > > AddressSpace *as; > > + uint64_t vmr_size = 0, pmr_size = 0, dc_size = 0; > > > > if (ct3d->hostvmem) { > > vmr = host_memory_backend_get_memory(ct3d->hostvmem); > > + vmr_size = memory_region_size(vmr); > > } > > if (ct3d->hostpmem) { > > pmr = host_memory_backend_get_memory(ct3d->hostpmem); > > + pmr_size = memory_region_size(pmr); > > } > > + if (ct3d->dc.host_dc) { > > + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); > > + dc_size = ct3d->dc.total_capacity; > > + } > > > > - if (!vmr && !pmr) { > > + if (!vmr && !pmr && !dc_mr) { > > return false; > > } > > > > - if (dpa_offset + CXL_CACHE_LINE_SIZE > ct3d->cxl_dstate.static_mem_size) { > > + if (dpa_offset + CXL_CACHE_LINE_SIZE > vmr_size + pmr_size + dc_size) { > > return false; > > } > > > > - if (vmr) { > > - if (dpa_offset < memory_region_size(vmr)) { > > - as = &ct3d->hostvmem_as; > > - } else { > > - as = &ct3d->hostpmem_as; > > - dpa_offset -= memory_region_size(vmr); > > - } > > - } else { > > + if (dpa_offset < vmr_size) { > > + as = &ct3d->hostvmem_as; > > + } else if (dpa_offset < vmr_size + pmr_size) { > > as = &ct3d->hostpmem_as; > > + dpa_offset -= vmr_size; > > + } else { > > + as = &ct3d->dc.host_dc_as; > > + dpa_offset -= (vmr_size + pmr_size); > > } > > > > address_space_write(as, dpa_offset, MEMTXATTRS_UNSPECIFIED, &data, > >
> > > *cdat_table = g_steal_pointer(&table); > > > @@ -445,11 +492,24 @@ static void build_dvsecs(CXLType3Dev *ct3d) > > > range2_size_hi = ct3d->hostpmem->size >> 32; > > > range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > > (ct3d->hostpmem->size & 0xF0000000); > > > + } else if (ct3d->dc.host_dc) { > > > + range2_size_hi = ct3d->dc.host_dc->size >> 32; > > > + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | > > > + (ct3d->dc.host_dc->size & 0xF0000000); > > > > I've forgotten if we came to a conclusion on whether these should include > > DC or not... My gut feeling is no because we don't know what to do > > if they are both already in use. > > > > QUESTION: > > If we do not include DC, and there is no static ram/pmem capacity and > only dynamic capacity, then the range registers will not be set, is that > what we want? I think that's a valid interpretation of the specification. So for now go with that. p.s. Sorry for slow response. Debugging had me distracted from catching up with the list.
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c index 707fd9fe7f..1f512b3e6b 100644 --- a/hw/cxl/cxl-mailbox-utils.c +++ b/hw/cxl/cxl-mailbox-utils.c @@ -596,7 +596,8 @@ static CXLRetCode cmd_firmware_update_get_info(const struct cxl_cmd *cmd, size_t *len_out, CXLCCI *cci) { - CXLDeviceState *cxl_dstate = &CXL_TYPE3(cci->d)->cxl_dstate; + CXLType3Dev *ct3d = CXL_TYPE3(cci->d); + CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; struct { uint8_t slots_supported; uint8_t slot_info; @@ -610,7 +611,8 @@ static CXLRetCode cmd_firmware_update_get_info(const struct cxl_cmd *cmd, QEMU_BUILD_BUG_ON(sizeof(*fw_info) != 0x50); if ((cxl_dstate->vmem_size < CXL_CAPACITY_MULTIPLIER) || - (cxl_dstate->pmem_size < CXL_CAPACITY_MULTIPLIER)) { + (cxl_dstate->pmem_size < CXL_CAPACITY_MULTIPLIER) || + (ct3d->dc.total_capacity < CXL_CAPACITY_MULTIPLIER)) { return CXL_MBOX_INTERNAL_ERROR; } @@ -764,7 +766,8 @@ static CXLRetCode cmd_identify_memory_device(const struct cxl_cmd *cmd, CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; if ((!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER)) || - (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER))) { + (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER)) || + (!QEMU_IS_ALIGNED(ct3d->dc.total_capacity, CXL_CAPACITY_MULTIPLIER))) { return CXL_MBOX_INTERNAL_ERROR; } @@ -805,9 +808,11 @@ static CXLRetCode cmd_ccls_get_partition_info(const struct cxl_cmd *cmd, uint64_t next_pmem; } QEMU_PACKED *part_info = (void *)payload_out; QEMU_BUILD_BUG_ON(sizeof(*part_info) != 0x20); + CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate); if ((!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER)) || - (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER))) { + (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER)) || + (!QEMU_IS_ALIGNED(ct3d->dc.total_capacity, CXL_CAPACITY_MULTIPLIER))) { return CXL_MBOX_INTERNAL_ERROR; } @@ -1149,7 +1154,8 @@ static CXLRetCode cmd_media_clear_poison(const struct cxl_cmd *cmd, struct clear_poison_pl *in = (void *)payload_in; dpa = ldq_le_p(&in->dpa); - if (dpa + CXL_CACHE_LINE_SIZE > cxl_dstate->static_mem_size) { + if (dpa + CXL_CACHE_LINE_SIZE > cxl_dstate->static_mem_size + + ct3d->dc.total_capacity) { return CXL_MBOX_INVALID_PA; } diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c index 2d67d2015c..152a51306d 100644 --- a/hw/mem/cxl_type3.c +++ b/hw/mem/cxl_type3.c @@ -31,6 +31,7 @@ #include "hw/pci/spdm.h" #define DWORD_BYTE 4 +#define CXL_CAPACITY_MULTIPLIER (256 * MiB) /* Default CDAT entries for a memory region */ enum { @@ -44,8 +45,9 @@ enum { }; static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, - int dsmad_handle, MemoryRegion *mr, - bool is_pmem, uint64_t dpa_base) + int dsmad_handle, uint64_t size, + bool is_pmem, bool is_dynamic, + uint64_t dpa_base) { g_autofree CDATDsmas *dsmas = NULL; g_autofree CDATDslbis *dslbis0 = NULL; @@ -64,9 +66,10 @@ static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, .length = sizeof(*dsmas), }, .DSMADhandle = dsmad_handle, - .flags = is_pmem ? CDAT_DSMAS_FLAG_NV : 0, + .flags = (is_pmem ? CDAT_DSMAS_FLAG_NV : 0) | + (is_dynamic ? CDAT_DSMAS_FLAG_DYNAMIC_CAP : 0), .DPA_base = dpa_base, - .DPA_length = memory_region_size(mr), + .DPA_length = size, }; /* For now, no memory side cache, plausiblish numbers */ @@ -150,7 +153,7 @@ static int ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, */ .EFI_memory_type_attr = is_pmem ? 2 : 1, .DPA_offset = 0, - .DPA_length = memory_region_size(mr), + .DPA_length = size, }; /* Header always at start of structure */ @@ -169,21 +172,28 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) g_autofree CDATSubHeader **table = NULL; CXLType3Dev *ct3d = priv; MemoryRegion *volatile_mr = NULL, *nonvolatile_mr = NULL; + MemoryRegion *dc_mr = NULL; int dsmad_handle = 0; int cur_ent = 0; int len = 0; int rc, i; + uint64_t vmr_size = 0, pmr_size = 0; - if (!ct3d->hostpmem && !ct3d->hostvmem) { + if (!ct3d->hostpmem && !ct3d->hostvmem && !ct3d->dc.num_regions) { return 0; } + if (ct3d->hostpmem && ct3d->hostvmem && ct3d->dc.host_dc) { + warn_report("The device has static ram and pmem and dynamic capacity"); + } + if (ct3d->hostvmem) { volatile_mr = host_memory_backend_get_memory(ct3d->hostvmem); if (!volatile_mr) { return -EINVAL; } len += CT3_CDAT_NUM_ENTRIES; + vmr_size = memory_region_size(volatile_mr); } if (ct3d->hostpmem) { @@ -192,6 +202,19 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) return -EINVAL; } len += CT3_CDAT_NUM_ENTRIES; + pmr_size = memory_region_size(nonvolatile_mr); + } + + if (ct3d->dc.num_regions) { + if (ct3d->dc.host_dc) { + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); + if (!dc_mr) { + return -EINVAL; + } + len += CT3_CDAT_NUM_ENTRIES * ct3d->dc.num_regions; + } else { + return -EINVAL; + } } table = g_malloc0(len * sizeof(*table)); @@ -201,8 +224,8 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) /* Now fill them in */ if (volatile_mr) { - rc = ct3_build_cdat_entries_for_mr(table, dsmad_handle++, volatile_mr, - false, 0); + rc = ct3_build_cdat_entries_for_mr(table, dsmad_handle++, vmr_size, + false, false, 0); if (rc < 0) { return rc; } @@ -210,14 +233,38 @@ static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) } if (nonvolatile_mr) { - uint64_t base = volatile_mr ? memory_region_size(volatile_mr) : 0; rc = ct3_build_cdat_entries_for_mr(&(table[cur_ent]), dsmad_handle++, - nonvolatile_mr, true, base); + pmr_size, true, false, vmr_size); if (rc < 0) { goto error_cleanup; } cur_ent += CT3_CDAT_NUM_ENTRIES; } + + if (dc_mr) { + uint64_t region_base = vmr_size + pmr_size; + + /* + * Currently we create cdat entries for each region, should we only + * create dsmas table instead?? + * We assume all dc regions are non-volatile for now. + * + */ + for (i = 0; i < ct3d->dc.num_regions; i++) { + rc = ct3_build_cdat_entries_for_mr(&(table[cur_ent]), + dsmad_handle++, + ct3d->dc.regions[i].len, + true, true, region_base); + if (rc < 0) { + goto error_cleanup; + } + ct3d->dc.regions[i].dsmadhandle = dsmad_handle - 1; + + cur_ent += CT3_CDAT_NUM_ENTRIES; + region_base += ct3d->dc.regions[i].len; + } + } + assert(len == cur_ent); *cdat_table = g_steal_pointer(&table); @@ -445,11 +492,24 @@ static void build_dvsecs(CXLType3Dev *ct3d) range2_size_hi = ct3d->hostpmem->size >> 32; range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | (ct3d->hostpmem->size & 0xF0000000); + } else if (ct3d->dc.host_dc) { + range2_size_hi = ct3d->dc.host_dc->size >> 32; + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | + (ct3d->dc.host_dc->size & 0xF0000000); } - } else { + } else if (ct3d->hostpmem) { range1_size_hi = ct3d->hostpmem->size >> 32; range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | (ct3d->hostpmem->size & 0xF0000000); + if (ct3d->dc.host_dc) { + range2_size_hi = ct3d->dc.host_dc->size >> 32; + range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | + (ct3d->dc.host_dc->size & 0xF0000000); + } + } else { + range1_size_hi = ct3d->dc.host_dc->size >> 32; + range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | + (ct3d->dc.host_dc->size & 0xF0000000); } dvsec = (uint8_t *)&(CXLDVSECDevice){ @@ -721,6 +781,9 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, } } +/* + * TODO: region parameters are hard coded, may need to change in the future. + */ static int cxl_create_dc_regions(CXLType3Dev *ct3d) { int i; @@ -736,6 +799,7 @@ static int cxl_create_dc_regions(CXLType3Dev *ct3d) if (ct3d->hostpmem) { region_base += ct3d->hostpmem->size; } + for (i = 0; i < ct3d->dc.num_regions; i++) { region = &ct3d->dc.regions[i]; region->base = region_base; @@ -755,7 +819,8 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) { DeviceState *ds = DEVICE(ct3d); - if (!ct3d->hostmem && !ct3d->hostvmem && !ct3d->hostpmem) { + if (!ct3d->hostmem && !ct3d->hostvmem && !ct3d->hostpmem + && !ct3d->dc.num_regions) { error_setg(errp, "at least one memdev property must be set"); return false; } else if (ct3d->hostmem && ct3d->hostpmem) { @@ -823,6 +888,50 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) return false; } + ct3d->dc.total_capacity = 0; + if (ct3d->dc.host_dc) { + MemoryRegion *dc_mr; + char *dc_name; + uint64_t total_region_size = 0; + int i; + + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); + if (!dc_mr) { + error_setg(errp, "dynamic capacity must have backing device"); + return false; + } + /* FIXME: set dc as nonvolatile for now */ + memory_region_set_nonvolatile(dc_mr, true); + memory_region_set_enabled(dc_mr, true); + host_memory_backend_set_mapped(ct3d->dc.host_dc, true); + if (ds->id) { + dc_name = g_strdup_printf("cxl-dcd-dpa-dc-space:%s", ds->id); + } else { + dc_name = g_strdup("cxl-dcd-dpa-dc-space"); + } + address_space_init(&ct3d->dc.host_dc_as, dc_mr, dc_name); + g_free(dc_name); + + for (i = 0; i < ct3d->dc.num_regions; i++) { + total_region_size += ct3d->dc.regions[i].len; + } + /* Make sure the host backend is large enough to cover all dc range */ + if (total_region_size > memory_region_size(dc_mr)) { + error_setg(errp, + "too small host backend size, increase to %lu MiB or more", + total_region_size / MiB); + return false; + } + + if (dc_mr->size % CXL_CAPACITY_MULTIPLIER != 0) { + error_setg(errp, "DC region size is unaligned to %lx", + CXL_CAPACITY_MULTIPLIER); + return false; + } + + ct3d->dc.total_capacity = total_region_size; + } + return true; } @@ -933,6 +1042,9 @@ err_release_cdat: err_free_special_ops: g_free(regs->special_ops); err_address_space_free: + if (ct3d->dc.host_dc) { + address_space_destroy(&ct3d->dc.host_dc_as); + } if (ct3d->hostpmem) { address_space_destroy(&ct3d->hostpmem_as); } @@ -952,6 +1064,9 @@ static void ct3_exit(PCIDevice *pci_dev) cxl_doe_cdat_release(cxl_cstate); spdm_sock_fini(ct3d->doe_spdm.socket); g_free(regs->special_ops); + if (ct3d->dc.host_dc) { + address_space_destroy(&ct3d->dc.host_dc_as); + } if (ct3d->hostpmem) { address_space_destroy(&ct3d->hostpmem_as); } @@ -1025,16 +1140,24 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, AddressSpace **as, uint64_t *dpa_offset) { - MemoryRegion *vmr = NULL, *pmr = NULL; + MemoryRegion *vmr = NULL, *pmr = NULL, *dc_mr = NULL; + uint64_t vmr_size = 0, pmr_size = 0, dc_size = 0; if (ct3d->hostvmem) { vmr = host_memory_backend_get_memory(ct3d->hostvmem); + vmr_size = memory_region_size(vmr); } if (ct3d->hostpmem) { pmr = host_memory_backend_get_memory(ct3d->hostpmem); + pmr_size = memory_region_size(pmr); + } + if (ct3d->dc.host_dc) { + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); + /* Do we want dc_size to be dc_mr->size or not?? */ + dc_size = ct3d->dc.total_capacity; } - if (!vmr && !pmr) { + if (!vmr && !pmr && !dc_mr) { return -ENODEV; } @@ -1042,19 +1165,18 @@ static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, return -EINVAL; } - if (*dpa_offset > ct3d->cxl_dstate.static_mem_size) { + if (*dpa_offset >= vmr_size + pmr_size + dc_size) { return -EINVAL; } - if (vmr) { - if (*dpa_offset < memory_region_size(vmr)) { - *as = &ct3d->hostvmem_as; - } else { - *as = &ct3d->hostpmem_as; - *dpa_offset -= memory_region_size(vmr); - } - } else { + if (*dpa_offset < vmr_size) { + *as = &ct3d->hostvmem_as; + } else if (*dpa_offset < vmr_size + pmr_size) { *as = &ct3d->hostpmem_as; + *dpa_offset -= vmr_size; + } else { + *as = &ct3d->dc.host_dc_as; + *dpa_offset -= (vmr_size + pmr_size); } return 0; @@ -1143,6 +1265,8 @@ static Property ct3_props[] = { DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename), DEFINE_PROP_UINT16("spdm", CXLType3Dev, spdm_port, 0), DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0), + DEFINE_PROP_LINK("nonvolatile-dc-memdev", CXLType3Dev, dc.host_dc, + TYPE_MEMORY_BACKEND, HostMemoryBackend *), DEFINE_PROP_END_OF_LIST(), }; @@ -1209,33 +1333,39 @@ static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size, static bool set_cacheline(CXLType3Dev *ct3d, uint64_t dpa_offset, uint8_t *data) { - MemoryRegion *vmr = NULL, *pmr = NULL; + MemoryRegion *vmr = NULL, *pmr = NULL, *dc_mr = NULL; AddressSpace *as; + uint64_t vmr_size = 0, pmr_size = 0, dc_size = 0; if (ct3d->hostvmem) { vmr = host_memory_backend_get_memory(ct3d->hostvmem); + vmr_size = memory_region_size(vmr); } if (ct3d->hostpmem) { pmr = host_memory_backend_get_memory(ct3d->hostpmem); + pmr_size = memory_region_size(pmr); } + if (ct3d->dc.host_dc) { + dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); + dc_size = ct3d->dc.total_capacity; + } - if (!vmr && !pmr) { + if (!vmr && !pmr && !dc_mr) { return false; } - if (dpa_offset + CXL_CACHE_LINE_SIZE > ct3d->cxl_dstate.static_mem_size) { + if (dpa_offset + CXL_CACHE_LINE_SIZE > vmr_size + pmr_size + dc_size) { return false; } - if (vmr) { - if (dpa_offset < memory_region_size(vmr)) { - as = &ct3d->hostvmem_as; - } else { - as = &ct3d->hostpmem_as; - dpa_offset -= memory_region_size(vmr); - } - } else { + if (dpa_offset < vmr_size) { + as = &ct3d->hostvmem_as; + } else if (dpa_offset < vmr_size + pmr_size) { as = &ct3d->hostpmem_as; + dpa_offset -= vmr_size; + } else { + as = &ct3d->dc.host_dc_as; + dpa_offset -= (vmr_size + pmr_size); } address_space_write(as, dpa_offset, MEMTXATTRS_UNSPECIFIED, &data, diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h index de6469eef7..3dc6928bc5 100644 --- a/include/hw/cxl/cxl_device.h +++ b/include/hw/cxl/cxl_device.h @@ -467,6 +467,10 @@ struct CXLType3Dev { uint64_t poison_list_overflow_ts; struct dynamic_capacity { + HostMemoryBackend *host_dc; + AddressSpace host_dc_as; + uint64_t total_capacity; /* 256M aligned */ + uint8_t num_regions; /* 0-8 regions */ CXLDCDRegion regions[DCD_MAX_REGION_NUM]; } dc;