Message ID | a99cb866897c7083430dce7f24c63b17d7121134.1705965635.git.isaku.yamahata@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | KVM TDX basic feature support | expand |
On 1/23/2024 7:53 AM, isaku.yamahata@intel.com wrote: > From: Sean Christopherson <sean.j.christopherson@intel.com> > > For TD guest, the current way to emulate MMIO doesn't work any more, as KVM > is not able to access the private memory of TD guest and do the emulation. > Instead, TD guest expects to receive #VE when it accesses the MMIO and then > it can explicitly make hypercall to KVM to get the expected information. > > To achieve this, the TDX module always enables "EPT-violation #VE" in the > VMCS control. And accordingly, for the MMIO spte for the shared GPA, > 1. KVM needs to set "suppress #VE" bit for the non-present SPTE so that EPT > violation happens on TD accessing MMIO range. 2. On EPT violation, KVM > sets the MMIO spte to clear "suppress #VE" bit so the TD guest can receive > the #VE instead of EPT misconfigration unlike VMX case. For the shared GPA s/misconfigration/misconfiguration > that is not populated yet, EPT violation need to be triggered when TD guest > accesses such shared GPA. The non-present SPTE value for shared GPA should > set "suppress #VE" bit. > > Add "suppress #VE" bit (bit 63) to SHADOW_NONPRESENT_VALUE and > REMOVED_SPTE. Unconditionally set the "suppress #VE" bit (which is bit 63) > for both AMD and Intel as: 1) AMD hardware doesn't use this bit when > present bit is off; 2) for normal VMX guest, KVM never enables the > "EPT-violation #VE" in VMCS control and "suppress #VE" bit is ignored by > hardware. > > Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> > Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Nit: one typo above. Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> > --- > arch/x86/kvm/mmu/spte.h | 15 ++++++++++++++- > 1 file changed, 14 insertions(+), 1 deletion(-) > > diff --git a/arch/x86/kvm/mmu/spte.h b/arch/x86/kvm/mmu/spte.h > index 4d1799ba2bf8..26bc95bbc962 100644 > --- a/arch/x86/kvm/mmu/spte.h > +++ b/arch/x86/kvm/mmu/spte.h > @@ -149,7 +149,20 @@ static_assert(MMIO_SPTE_GEN_LOW_BITS == 8 && MMIO_SPTE_GEN_HIGH_BITS == 11); > > #define MMIO_SPTE_GEN_MASK GENMASK_ULL(MMIO_SPTE_GEN_LOW_BITS + MMIO_SPTE_GEN_HIGH_BITS - 1, 0) > > +/* > + * Non-present SPTE value for both VMX and SVM for TDP MMU. > + * For SVM NPT, for non-present spte (bit 0 = 0), other bits are ignored. > + * For VMX EPT, bit 63 is ignored if #VE is disabled. (EPT_VIOLATION_VE=0) > + * bit 63 is #VE suppress if #VE is enabled. (EPT_VIOLATION_VE=1) > + * For TDX: > + * TDX module sets EPT_VIOLATION_VE for Secure-EPT and conventional EPT > + */ > +#ifdef CONFIG_X86_64 > +#define SHADOW_NONPRESENT_VALUE BIT_ULL(63) > +static_assert(!(SHADOW_NONPRESENT_VALUE & SPTE_MMU_PRESENT_MASK)); > +#else > #define SHADOW_NONPRESENT_VALUE 0ULL > +#endif > > extern u64 __read_mostly shadow_host_writable_mask; > extern u64 __read_mostly shadow_mmu_writable_mask; > @@ -196,7 +209,7 @@ extern u64 __read_mostly shadow_nonpresent_or_rsvd_mask; > * > * Only used by the TDP MMU. > */ > -#define REMOVED_SPTE 0x5a0ULL > +#define REMOVED_SPTE (SHADOW_NONPRESENT_VALUE | 0x5a0ULL) > > /* Removed SPTEs must not be misconstrued as shadow present PTEs. */ > static_assert(!(REMOVED_SPTE & SPTE_MMU_PRESENT_MASK));
diff --git a/arch/x86/kvm/mmu/spte.h b/arch/x86/kvm/mmu/spte.h index 4d1799ba2bf8..26bc95bbc962 100644 --- a/arch/x86/kvm/mmu/spte.h +++ b/arch/x86/kvm/mmu/spte.h @@ -149,7 +149,20 @@ static_assert(MMIO_SPTE_GEN_LOW_BITS == 8 && MMIO_SPTE_GEN_HIGH_BITS == 11); #define MMIO_SPTE_GEN_MASK GENMASK_ULL(MMIO_SPTE_GEN_LOW_BITS + MMIO_SPTE_GEN_HIGH_BITS - 1, 0) +/* + * Non-present SPTE value for both VMX and SVM for TDP MMU. + * For SVM NPT, for non-present spte (bit 0 = 0), other bits are ignored. + * For VMX EPT, bit 63 is ignored if #VE is disabled. (EPT_VIOLATION_VE=0) + * bit 63 is #VE suppress if #VE is enabled. (EPT_VIOLATION_VE=1) + * For TDX: + * TDX module sets EPT_VIOLATION_VE for Secure-EPT and conventional EPT + */ +#ifdef CONFIG_X86_64 +#define SHADOW_NONPRESENT_VALUE BIT_ULL(63) +static_assert(!(SHADOW_NONPRESENT_VALUE & SPTE_MMU_PRESENT_MASK)); +#else #define SHADOW_NONPRESENT_VALUE 0ULL +#endif extern u64 __read_mostly shadow_host_writable_mask; extern u64 __read_mostly shadow_mmu_writable_mask; @@ -196,7 +209,7 @@ extern u64 __read_mostly shadow_nonpresent_or_rsvd_mask; * * Only used by the TDP MMU. */ -#define REMOVED_SPTE 0x5a0ULL +#define REMOVED_SPTE (SHADOW_NONPRESENT_VALUE | 0x5a0ULL) /* Removed SPTEs must not be misconstrued as shadow present PTEs. */ static_assert(!(REMOVED_SPTE & SPTE_MMU_PRESENT_MASK));