diff mbox series

[v2,1/4] ASoc: PCM6240: Create PCM6240 Family driver code

Message ID 20240126035855.1785-1-shenghao-ding@ti.com (mailing list archive)
State Superseded
Headers show
Series [v2,1/4] ASoc: PCM6240: Create PCM6240 Family driver code | expand

Commit Message

Shenghao Ding Jan. 26, 2024, 3:58 a.m. UTC
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>

---
Change in v2:
 - All these chips have only a portion of the functionality of codec,
   such as ADC or DAC, and so on, but their audio performance is far
   superior to the codec's, and cost is lower than codec, and much easier
   to program than codec.
---
 sound/soc/codecs/pcm6240.c | 2062 ++++++++++++++++++++++++++++++++++++
 1 file changed, 2062 insertions(+)
 create mode 100644 sound/soc/codecs/pcm6240.c

Comments

Mark Brown Jan. 26, 2024, 2:33 p.m. UTC | #1
On Fri, Jan 26, 2024 at 11:58:51AM +0800, Shenghao Ding wrote:

This looks mostly good - I've got a few comments that are mainly
stylistic or otherwise very minor, there's one issue with validation of
profile IDs that does look like it's important to fix though.

> +static int pcmdev_dev_read(struct pcmdevice_priv *pcm_dev,
> +	unsigned int dev_no, unsigned int reg, unsigned int *val)
> +{
> +	int ret = -EINVAL;
> +
> +	if (dev_no < pcm_dev->ndev) {

You could write all these functions a bit more simply if you rewrote
these error checks to return immediately on error, that way there's less
indentation and fewer paths later on.

	if (dev_no >= pcm_dev->ndev)
		return -EINVAL;

and so on.  For the ones dealing with locking it can help to have a
single exit path but functions like this don't deal directly with the
locks.

> +
> +		ret = regmap_read(map, reg, val);
> +		if (ret < 0)
> +			dev_err(pcm_dev->dev, "%s, E=%d\n", __func__, ret);
> +	} else
> +		dev_err(pcm_dev->dev, "%s, no such channel(%d)\n", __func__,
> +			dev_no);
> +

The kernel coding style is that if one side of an if/else has { } both
should.

> +static int pcmdevice_set_profile_id(
> +	struct snd_kcontrol *kcontrol,
> +	struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *codec
> +		= snd_soc_kcontrol_component(kcontrol);
> +	struct pcmdevice_priv *pcm_dev =
> +		snd_soc_component_get_drvdata(codec);
> +	int ret = 0;
> +
> +	if (pcm_dev->cur_conf != ucontrol->value.integer.value[0]) {
> +		pcm_dev->cur_conf = ucontrol->value.integer.value[0];
> +		ret = 1;
> +	}
> +
> +	return ret;
> +}

This will accept any configuration number, shouldn't there be some
validation here?  The put functions doing regmap_update_bits() have
some limiting of values in the regmap_update_bits() but this just stores
the value directly.

> +static int pcmdevice_get_volsw(struct snd_kcontrol *kcontrol,
> +	struct snd_ctl_elem_value *ucontrol)
> +{

> +	mutex_lock(&pcm_dev->codec_lock);
> +	rc = pcmdev_dev_read(pcm_dev, dev_no, reg, &val);
> +	if (rc) {
> +		dev_err(pcm_dev->dev, "%s:read, ERROR, E=%d\n",
> +			__func__, rc);
> +		goto out;
> +	}

It would be kind of nice if the device switching could be hidden inside
a custom regmap and we didn't have all this code duplication but I'm not
thinking of a way of doing that which doesn't just create complications
so probably this is fine.

> +	val = (val >> shift) & mask;
> +	val = (val > max) ? max : val;
> +	val = mc->invert ? max - val : val;
> +	ucontrol->value.integer.value[0] = val;

There's the FIELD_GET() macro (and FIELD_SET() for writing values) - the
core predates them and hence doesn't use them, we might want to update
some time.

> +static int pcmdevice_codec_probe(struct snd_soc_component *codec)
> +{

> +	ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
> +		pcm_dev->regbin_name, pcm_dev->dev, GFP_KERNEL, pcm_dev,
> +		pcmdev_regbin_ready);
> +	if (ret) {
> +		dev_err(pcm_dev->dev, "load %s error = %d\n",
> +			pcm_dev->regbin_name, ret);
> +		goto out;
> +	}

It might be better to request the firmware in the I2C probe rather than
in the ASoC level probe, that way there's more time for the firmware to
be loaded before we actually need it.  That does mean you can't register
the controls immediately though so it may be more trouble than it's
worth.

Similarly for the reset, if we reset as early as possible that seems
better.

> +static int pcmdevice_startup(struct snd_pcm_substream *substream,
> +	struct snd_soc_dai *dai)
> +{
> +	struct snd_soc_component *codec = dai->component;
> +	struct pcmdevice_priv *pcm_priv = snd_soc_component_get_drvdata(codec);
> +	int ret = 0;
> +
> +	if (pcm_priv->fw_state != PCMDEVICE_FW_LOAD_OK) {
> +		dev_err(pcm_priv->dev, "DSP bin file not loaded\n");
> +		ret = -EINVAL;
> +	}

Perhaps -EBUSY instead?  What the user is doing is valid.

> +static const struct regmap_config pcmdevice_i2c_regmap = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,

Use _MAPLE for new devices, it's a more modern design with tradeoffs
that work better for most current systems.
Andy Shevchenko Jan. 28, 2024, 3:23 p.m. UTC | #2
On Fri, Jan 26, 2024 at 11:58:51AM +0800, Shenghao Ding wrote:
> PCM6240 driver implements a flexible and configurable setting for register
> and filter coefficients, to one, two or even multiple PCM6240 Family Audio
> chips.

Same comments applied as per previous version, please read my email and address
them.
Shenghao Ding Jan. 29, 2024, 5:03 a.m. UTC | #3
> -----Original Message-----
> From: Mark Brown <broonie@kernel.org>
> Sent: Friday, January 26, 2024 10:33 PM
> To: Ding, Shenghao <shenghao-ding@ti.com>
> Cc: conor+dt@kernel.org; krzysztof.kozlowski@linaro.org;
> robh+dt@kernel.org; andriy.shevchenko@linux.intel.com; Lu, Kevin <kevin-
> lu@ti.com>; Xu, Baojun <baojun.xu@ti.com>; devicetree@vger.kernel.org; P
> O, Vijeth <v-po@ti.com>; lgirdwood@gmail.com; perex@perex.cz; pierre-
> louis.bossart@linux.intel.com; 13916275206@139.com; Chawla, Mohit
> <mohit.chawla@ti.com>; linux-sound@vger.kernel.org; linux-
> kernel@vger.kernel.org; liam.r.girdwood@intel.com; soyer@irl.hu; Huang,
> Jonathan <jkhuang3@ti.com>; tiwai@suse.de; Djuandi, Peter
> <pdjuandi@ti.com>; McPherson, Jeff <j-mcpherson@ti.com>; Navada
> Kanyana, Mukund <navada@ti.com>
> Subject: [EXTERNAL] Re: [PATCH v2 1/4] ASoc: PCM6240: Create PCM6240
> Family driver code
> 
> On Fri, Jan 26, 2024 at 11:58:51AM +0800, Shenghao Ding wrote:
> 
> This looks mostly good - I've got a few comments that are mainly stylistic or
> otherwise very minor, there's one issue with validation of profile IDs that
> does look like it's important to fix though.
..............................
> 
> > +	val = (val >> shift) & mask;
> > +	val = (val > max) ? max : val;
> > +	val = mc->invert ? max - val : val;
> > +	ucontrol->value.integer.value[0] = val;
> 
> There's the FIELD_GET() macro (and FIELD_SET() for writing values) - the core
> predates them and hence doesn't use them, we might want to update some
> time.
Hi, Mark. FIELD_GET seemed not suitable in this, because mask in not the const. 
it will cause compile error.
> 
> > +static int pcmdevice_codec_probe(struct snd_soc_component *codec) {
> 
> > +	ret = request_firmware_nowait(THIS_MODULE,
> FW_ACTION_UEVENT,
> > +		pcm_dev->regbin_name, pcm_dev->dev, GFP_KERNEL,
> pcm_dev,
> > +		pcmdev_regbin_ready);
> > +	if (ret) {
> > +		dev_err(pcm_dev->dev, "load %s error = %d\n",
> > +			pcm_dev->regbin_name, ret);
> > +		goto out;
> > +	}
> 
> It might be better to request the firmware in the I2C probe rather than in the
> ASoC level probe, that way there's more time for the firmware to be loaded
> before we actually need it.  That does mean you can't register the controls
> immediately though so it may be more trouble than it's worth.

I once put request_firmware_nowait in i2c_probe, but it sometimes returned 
error in some platforms. So my customer suggest that it would be moved into 
the codec_probe. It seemed filesystem is not completely ready in some 
platform during calling the i2c_probe.
> 
> Similarly for the reset, if we reset as early as possible that seems better.

As to reset, it is also from my customers' suggestion. they found the issue that 
i2c access error in i2c_probe in some platform. So they put it into codec_probe.
Mark Brown Jan. 29, 2024, 1:40 p.m. UTC | #4
On Mon, Jan 29, 2024 at 05:03:48AM +0000, Ding, Shenghao wrote:

> > It might be better to request the firmware in the I2C probe rather than in the
> > ASoC level probe, that way there's more time for the firmware to be loaded
> > before we actually need it.  That does mean you can't register the controls
> > immediately though so it may be more trouble than it's worth.

> I once put request_firmware_nowait in i2c_probe, but it sometimes returned 
> error in some platforms. So my customer suggest that it would be moved into 
> the codec_probe. It seemed filesystem is not completely ready in some 
> platform during calling the i2c_probe.

That indicates that this is still racy - shuffling things around has
papered over a timing issue on their particular system but it's still
possible to have the card come up before the filesystems are fully ready
(especially if all the drivers are built in).  If the DSP firmware is
essential to the device's operation the driver should defer registration
with the core until the firmware has loaded.  wm8958 should have an
example of this IIRC.

> > Similarly for the reset, if we reset as early as possible that seems better.

> As to reset, it is also from my customers' suggestion. they found the issue that 
> i2c access error in i2c_probe in some platform. So they put it into codec_probe.

That suggests the reset might be missing some delays or something and
again there might be some issues.
diff mbox series

Patch

diff --git a/sound/soc/codecs/pcm6240.c b/sound/soc/codecs/pcm6240.c
new file mode 100644
index 000000000000..d9e4d57dc115
--- /dev/null
+++ b/sound/soc/codecs/pcm6240.c
@@ -0,0 +1,2062 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// ALSA SoC Texas Instruments PCM6240 Family Audio ADC/DAC/Router
+//
+// Copyright (C) 2022 - 2024 Texas Instruments Incorporated
+// https://www.ti.com
+//
+// The PCM6240 driver implements a flexible and configurable
+// algo coefficient setting for one, two, or even multiple
+// PCM6240 Family chips.
+//
+// Author: Shenghao Ding <shenghao-ding@ti.com>
+//
+
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include "pcm6240.h"
+
+static const struct i2c_device_id pcmdevice_i2c_id[] = {
+	{ "adc3120",  ADC3120  },
+	{ "adc5120",  ADC5120  },
+	{ "adc6120",  ADC6120  },
+	{ "dix4192",  DIX4192  },
+	{ "pcm1690",  PCM1690  },
+	{ "pcm3120",  PCM3120  },
+	{ "pcm3140",  PCM3140  },
+	{ "pcm5120",  PCM5120  },
+	{ "pcm5140",  PCM5140  },
+	{ "pcm6120",  PCM6120  },
+	{ "pcm6140",  PCM6140  },
+	{ "pcm6240",  PCM6240  },
+	{ "pcm6260",  PCM6260  },
+	{ "pcm9211",  PCM9211  },
+	{ "pcmd3140", PCMD3140 },
+	{ "pcmd3180", PCMD3180 },
+	{ "pcmd512x", PCMD512X },
+	{ "taa5212",  TAA5212  },
+	{ "taa5412",  TAA5412  },
+	{ "tad5212",  TAD5212  },
+	{ "tad5412",  TAD5412  },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pcmdevice_i2c_id);
+
+static struct pcmdevice_mixer_control adc5120_analog_gain_ctl[] = {
+	{
+		.shift = 1,
+		.reg = ADC5120_REG_CH1_ANALOG_GAIN,
+		.max = 0x54,
+		.invert = 0,
+	},
+	{
+		.shift = 1,
+		.reg = ADC5120_REG_CH2_ANALOG_GAIN,
+		.max = 0x54,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control adc5120_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = ADC5120_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = ADC5120_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcm1690_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH3_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH4_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH5_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH6_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH7_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM1690_REG_CH8_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcm6240_analog_gain_ctl[] = {
+	{
+		.shift = 2,
+		.reg = PCM6240_REG_CH1_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6240_REG_CH2_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6240_REG_CH3_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6240_REG_CH4_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcm6240_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = PCM6240_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6240_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6240_REG_CH3_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6240_REG_CH4_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcm6260_analog_gain_ctl[] = {
+	{
+		.shift = 2,
+		.reg = PCM6260_REG_CH1_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6260_REG_CH2_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6260_REG_CH3_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6260_REG_CH4_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6260_REG_CH5_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	},
+	{
+		.shift = 2,
+		.reg = PCM6260_REG_CH6_ANALOG_GAIN,
+		.max = 0x42,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcm6260_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = PCM6260_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6260_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6260_REG_CH3_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6260_REG_CH4_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6260_REG_CH5_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM6260_REG_CH6_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcm9211_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = PCM9211_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCM9211_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcmd3140_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = PCMD3140_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3140_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3140_REG_CH3_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3140_REG_CH4_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control pcmd3180_digital_gain_ctl[] = {
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH1_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH2_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH3_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH4_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH5_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH6_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH7_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = PCMD3180_REG_CH8_DIGITAL_GAIN,
+		.max = 0xff,
+		.invert = 0,
+	}
+};
+
+static struct pcmdevice_mixer_control taa5412_digital_volume_ctl[] = {
+	{
+		.shift = 0,
+		.reg = TAA5412_REG_CH1_DIGITAL_VOLUME,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = TAA5412_REG_CH2_DIGITAL_VOLUME,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = TAA5412_REG_CH3_DIGITAL_VOLUME,
+		.max = 0xff,
+		.invert = 0,
+	},
+	{
+		.shift = 0,
+		.reg = TAA5412_REG_CH4_DIGITAL_VOLUME,
+		.max = 0xff,
+		.invert = 0,
+	},
+};
+
+static struct pcmdevice_mixer_control taa5412_fine_gain_ctl[] = {
+	{
+		.shift = 4,
+		.reg = TAA5412_REG_CH1_FINE_GAIN,
+		.max = 0xf,
+		.invert = 0,
+	},
+	{
+		.shift = 4,
+		.reg = TAA5412_REG_CH2_FINE_GAIN,
+		.max = 0xf,
+		.invert = 0,
+	},
+	{
+		.shift = 4,
+		.reg = TAA5412_REG_CH3_FINE_GAIN,
+		.max = 0xf,
+		.invert = 4,
+	},
+	{
+		.shift = 0,
+		.reg = TAA5412_REG_CH4_FINE_GAIN,
+		.max = 0xf,
+		.invert = 4,
+	},
+};
+
+static const DECLARE_TLV_DB_MINMAX_MUTE(pcmd3180_dig_gain_tlv,
+	-10000, 2700);
+static const DECLARE_TLV_DB_MINMAX_MUTE(pcmd3140_dig_gain_tlv,
+	-10000, 2700);
+static const DECLARE_TLV_DB_MINMAX_MUTE(pcm1690_fine_dig_gain_tlv,
+	-12750, 0);
+static const DECLARE_TLV_DB_MINMAX_MUTE(pcm1690_dig_gain_tlv,
+	-25500, 0);
+static const DECLARE_TLV_DB_MINMAX_MUTE(pcm9211_dig_gain_tlv,
+	-11450, 2000);
+static const DECLARE_TLV_DB_MINMAX_MUTE(adc5120_fgain_tlv,
+	-10050, 2700);
+static const DECLARE_TLV_DB_LINEAR(adc5120_chgain_tlv, 0, 4200);
+static const DECLARE_TLV_DB_MINMAX_MUTE(pcm6260_fgain_tlv,
+	-10000, 2700);
+static const DECLARE_TLV_DB_LINEAR(pcm6260_chgain_tlv, 0, 4200);
+static const DECLARE_TLV_DB_MINMAX_MUTE(taa5412_dig_vol_tlv,
+	-8050, 4700);
+static const DECLARE_TLV_DB_LINEAR(taa5412_fine_gain_tlv,
+	-80, 70);
+
+static int pcmdev_change_dev(struct pcmdevice_priv *pcm_priv,
+	unsigned short dev_no)
+{
+	struct i2c_client *client = (struct i2c_client *)pcm_priv->client;
+	struct regmap *map = pcm_priv->regmap;
+	int ret = 0;
+
+	if (client->addr != pcm_priv->addr[dev_no]) {
+		client->addr = pcm_priv->addr[dev_no];
+		/* All pcmdevices share the same regmap, clear the page
+		 * inside regmap once switching to another pcmdevice.
+		 * Register 0 at any pages inside pcmdevice is the same
+		 * one for page-switching.
+		 */
+		ret = regmap_write(map, PCMDEVICE_PAGE_SELECT, 0);
+		if (ret < 0)
+			dev_err(pcm_priv->dev, "%s, E=%d\n", __func__, ret);
+	}
+
+	return ret;
+}
+
+static int pcmdev_dev_read(struct pcmdevice_priv *pcm_dev,
+	unsigned int dev_no, unsigned int reg, unsigned int *val)
+{
+	int ret = -EINVAL;
+
+	if (dev_no < pcm_dev->ndev) {
+		struct regmap *map = pcm_dev->regmap;
+
+		ret = pcmdev_change_dev(pcm_dev, dev_no);
+		if (ret < 0) {
+			dev_err(pcm_dev->dev, "%s, E=%d\n", __func__, ret);
+			goto out;
+		}
+
+		ret = regmap_read(map, reg, val);
+		if (ret < 0)
+			dev_err(pcm_dev->dev, "%s, E=%d\n", __func__, ret);
+	} else
+		dev_err(pcm_dev->dev, "%s, no such channel(%d)\n", __func__,
+			dev_no);
+
+
+out:
+	return ret;
+}
+
+static int pcmdev_dev_bulk_write(struct pcmdevice_priv *pcm_dev,
+	unsigned int dev_no, unsigned int reg, unsigned char *data,
+	unsigned int len)
+{
+	int ret = -EINVAL;
+
+	if (dev_no < pcm_dev->ndev) {
+		struct regmap *map = pcm_dev->regmap;
+
+		ret = pcmdev_change_dev(pcm_dev, dev_no);
+		if (ret < 0) {
+			dev_err(pcm_dev->dev, "%s, E=%d\n", __func__, ret);
+			goto out;
+		}
+
+		ret = regmap_bulk_write(map, reg, data, len);
+		if (ret < 0)
+			dev_err(pcm_dev->dev, "bulk_write ERROR, E=%d\n",
+				ret);
+	} else
+		dev_err(pcm_dev->dev, "%s, ERROR: no such channel(%d)\n",
+			__func__, dev_no);
+
+out:
+	return ret;
+}
+
+static int pcmdev_dev_update_bits(struct pcmdevice_priv *pcm_dev,
+	unsigned int dev_no, unsigned int reg, unsigned int mask,
+	unsigned int value)
+{
+	struct regmap *map = pcm_dev->regmap;
+	int ret =  -EINVAL;
+
+	if (dev_no < pcm_dev->ndev) {
+		ret = pcmdev_change_dev(pcm_dev, dev_no);
+		if (ret < 0) {
+			dev_err(pcm_dev->dev, "%s, E=%d\n",
+				__func__, ret);
+			goto out;
+		}
+
+		ret = regmap_update_bits(map, reg, mask, value);
+		if (ret < 0)
+			dev_err(pcm_dev->dev, "update_bits ERROR, E=%d\n",
+				ret);
+	} else
+		dev_err(pcm_dev->dev, "%s, ERROR: no such device(%d)\n",
+			__func__, dev_no);
+
+out:
+	return ret;
+}
+
+static int pcmdev_dev_write(struct pcmdevice_priv *pcm_dev,
+	unsigned int dev_no, unsigned int reg, unsigned int value)
+{
+	struct regmap *map = pcm_dev->regmap;
+	int ret = 0;
+
+	if (dev_no < pcm_dev->ndev) {
+		ret = pcmdev_change_dev(pcm_dev, dev_no);
+		if (ret < 0) {
+			dev_err(pcm_dev->dev, "%s, E=%d\n",
+				__func__, ret);
+			goto out;
+		}
+
+		ret = regmap_write(map, reg, value);
+		if (ret < 0)
+			dev_err(pcm_dev->dev, "%s, E=%d\n", __func__, ret);
+	} else
+		dev_err(pcm_dev->dev, "%s, ERROR: no such device(%d)\n",
+			__func__, dev_no);
+
+out:
+	return ret;
+}
+
+static int pcmdevice_info_profile(
+	struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	struct snd_soc_component *codec
+		= snd_soc_kcontrol_component(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(codec);
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = max(0, pcm_dev->regbin.ncfgs - 1);
+
+	return 0;
+}
+
+static int pcmdevice_get_profile_id(
+	struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec
+		= snd_soc_kcontrol_component(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(codec);
+
+	ucontrol->value.integer.value[0] = pcm_dev->cur_conf;
+
+	return 0;
+}
+
+static int pcmdevice_set_profile_id(
+	struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec
+		= snd_soc_kcontrol_component(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(codec);
+	int ret = 0;
+
+	if (pcm_dev->cur_conf != ucontrol->value.integer.value[0]) {
+		pcm_dev->cur_conf = ucontrol->value.integer.value[0];
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int pcmdevice_info_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = mc->max;
+	return 0;
+}
+
+static int pcmdevice_get_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(component);
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+	unsigned int reg = mc->reg;
+	unsigned int dev_no = mc->dev_no;
+	int max = mc->max;
+	int rc = 0;
+	unsigned int val;
+	unsigned int shift = mc->shift;
+	unsigned int mask = (1 << fls(max)) - 1;
+
+
+	mutex_lock(&pcm_dev->codec_lock);
+	rc = pcmdev_dev_read(pcm_dev, dev_no, reg, &val);
+	if (rc) {
+		dev_err(pcm_dev->dev, "%s:read, ERROR, E=%d\n",
+			__func__, rc);
+		goto out;
+	}
+
+	val = (val >> shift) & mask;
+	val = (val > max) ? max : val;
+	val = mc->invert ? max - val : val;
+	ucontrol->value.integer.value[0] = val;
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return rc;
+}
+
+static int pcmdevice_put_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(component);
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+	int err = 0;
+	unsigned int reg = mc->reg;
+	unsigned int dev_no = mc->dev_no;
+	int max = mc->max;
+	unsigned int val, val_mask;
+	unsigned int shift = mc->shift;
+	unsigned int mask = (1 << fls(max)) - 1;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	val = ucontrol->value.integer.value[0] & mask;
+	val = (val > max) ? max : val;
+	val = mc->invert ? max - val : val;
+	val_mask = mask << shift;
+	val = val << shift;
+	err = pcmdev_dev_update_bits(pcm_dev, dev_no, reg, val_mask,
+		val);
+	if (err) {
+		dev_err(pcm_dev->dev, "%s:update_bits, ERROR, E=%d\n",
+			__func__, err);
+		goto out;
+	}
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return err;
+}
+
+static int pcm1690_get_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(component);
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+	unsigned int reg = mc->reg;
+	unsigned int dev_no = mc->dev_no;
+	int max = mc->max;
+	int rc = 0;
+	unsigned int val;
+	unsigned int shift = mc->shift;
+	unsigned int mask = (1 << fls(max)) - 1;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	rc = pcmdev_dev_read(pcm_dev, dev_no, PCM1690_REG_MODE_CTRL,
+		&val);
+	if (rc) {
+		dev_err(pcm_dev->dev, "%s:read mode, ERROR, E=%d\n",
+			__func__, rc);
+		goto out;
+	}
+	if (!(val & PCM1690_REG_MODE_CTRL_DAMS_MSK)) {
+		dev_info(pcm_dev->dev,
+			"%s: set to wide-range mode, before using this ctrl\n",
+			__func__);
+		ucontrol->value.integer.value[0] = -25500;
+		goto out;
+	}
+	rc = pcmdev_dev_read(pcm_dev, dev_no, reg, &val);
+	if (rc) {
+		dev_err(pcm_dev->dev, "%s:read, ERROR, E=%d\n",
+			__func__, rc);
+		goto out;
+	}
+
+	val = (val >> shift) & mask;
+	val = (val > max) ? max : val;
+	val = mc->invert ? max - val : val;
+	ucontrol->value.integer.value[0] = val;
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return rc;
+}
+
+static int pcm1690_put_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(component);
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+	int err = 0;
+	unsigned int reg = mc->reg;
+	unsigned int dev_no = mc->dev_no;
+	int max = mc->max;
+	unsigned int val, val_mask;
+	unsigned int shift = mc->shift;
+	unsigned int mask = (1 << fls(max)) - 1;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	val = ucontrol->value.integer.value[0] & mask;
+	val = (val > max) ? max : val;
+	val = mc->invert ? max - val : val;
+	val_mask = mask << shift;
+	val = val << shift;
+	err = pcmdev_dev_update_bits(pcm_dev, dev_no, reg,
+		PCM1690_REG_MODE_CTRL_DAMS_MSK | val_mask,
+		PCM1690_REG_MODE_CTRL_DAMS_WIDE_RANGE | val);
+	if (err) {
+		dev_err(pcm_dev->dev, "%s:update_bits, ERROR, E=%d\n",
+			__func__, err);
+		goto out;
+	}
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return err;
+}
+
+static int pcm1690_get_finevolsw(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(component);
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+	unsigned int reg = mc->reg;
+	unsigned int dev_no = mc->dev_no;
+	int max = mc->max;
+	int rc = 0;
+	unsigned int val;
+	unsigned int shift = mc->shift;
+	unsigned int mask = (1 << fls(max)) - 1;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	rc = pcmdev_dev_read(pcm_dev, dev_no, PCM1690_REG_MODE_CTRL,
+		&val);
+	if (rc) {
+		dev_err(pcm_dev->dev, "%s:read mode, ERROR, E=%d\n",
+			__func__, rc);
+		goto out;
+	}
+	if (val & PCM1690_REG_MODE_CTRL_DAMS_MSK) {
+		dev_info(pcm_dev->dev,
+			"%s: Set to fine mode, before using this ctrl\n",
+			__func__);
+		ucontrol->value.integer.value[0] = -12750;
+		goto out;
+	}
+	rc = pcmdev_dev_read(pcm_dev, dev_no, reg, &val);
+	if (rc) {
+		dev_err(pcm_dev->dev, "%s:read, ERROR, E=%d\n",
+			__func__, rc);
+		goto out;
+	}
+
+	val = (val >> shift) & mask;
+	val = (val > max) ? max : val;
+	val = mc->invert ? max - val : val;
+	ucontrol->value.integer.value[0] = val;
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return rc;
+}
+
+static int pcm1690_put_finevolsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct pcmdevice_priv *pcm_dev =
+		snd_soc_component_get_drvdata(component);
+	struct pcmdevice_mixer_control *mc =
+		(struct pcmdevice_mixer_control *)kcontrol->private_value;
+	int err = 0;
+	unsigned int reg = mc->reg;
+	unsigned int dev_no = mc->dev_no;
+	int max = mc->max;
+	unsigned int val, val_mask;
+	unsigned int shift = mc->shift;
+	unsigned int mask = (1 << fls(max)) - 1;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	val = ucontrol->value.integer.value[0] & mask;
+	val = (val > max) ? max : val;
+	val = mc->invert ? max - val : val;
+	val_mask = mask << shift;
+	val = val << shift;
+	err = pcmdev_dev_update_bits(pcm_dev, dev_no, reg,
+		PCM1690_REG_MODE_CTRL_DAMS_MSK | val_mask,
+		PCM1690_REG_MODE_CTRL_DAMS_FINE_STEP | val);
+	if (err) {
+		dev_err(pcm_dev->dev, "%s:update_bits, ERROR, E=%d\n",
+			__func__, err);
+		goto out;
+	}
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return err;
+}
+
+static int pcm1690_ctrl_add(struct pcmdevice_priv *pcm_dev)
+{
+	struct i2c_adapter *adap = pcm_dev->client->adapter;
+	struct pcmdev_ctrl_info fine_dig_ctl_info = {0};
+	struct pcmdev_ctrl_info dig_ctl_info = {0};
+	struct snd_kcontrol_new *pcmdev_controls;
+	int nr_controls = 1, ret = 0, mix_index = 0, i, chn;
+	char *name;
+
+	dig_ctl_info.gain = pcm1690_dig_gain_tlv;
+	dig_ctl_info.pcmdev_ctrl = pcm1690_digital_gain_ctl;
+	dig_ctl_info.ctrl_array_size =
+		ARRAY_SIZE(pcm1690_digital_gain_ctl);
+
+	fine_dig_ctl_info.gain = pcm1690_fine_dig_gain_tlv;
+	fine_dig_ctl_info.pcmdev_ctrl = pcm1690_digital_gain_ctl;
+	fine_dig_ctl_info.ctrl_array_size =
+		ARRAY_SIZE(pcm1690_digital_gain_ctl);
+	nr_controls += pcm_dev->ndev * (dig_ctl_info.ctrl_array_size +
+		fine_dig_ctl_info.ctrl_array_size);
+
+	pcmdev_controls = devm_kzalloc(pcm_dev->dev,
+		nr_controls * sizeof(*pcmdev_controls),
+		GFP_KERNEL);
+	if (!pcmdev_controls) {
+		pcm_dev->pcm_ctrl.pcmdevice_profile_controls = NULL;
+		ret = -ENOMEM;
+		goto out;
+	}
+	pcm_dev->pcm_ctrl.pcmdevice_profile_controls = pcmdev_controls;
+	/* Create a mixer item for selecting the active profile */
+	name = devm_kzalloc(pcm_dev->dev,
+		SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL);
+	if (!name) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "PCMDEVICE Profile id");
+	pcmdev_controls[mix_index].name = name;
+	pcmdev_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+	pcmdev_controls[mix_index].info = pcmdevice_info_profile;
+	pcmdev_controls[mix_index].get = pcmdevice_get_profile_id;
+	pcmdev_controls[mix_index].put = pcmdevice_set_profile_id;
+	mix_index++;
+
+	for (i = 0; i < pcm_dev->ndev; i++) {
+		if (mix_index >= nr_controls) {
+			dev_dbg(pcm_dev->dev,
+				"%s: mix_index: %d nr_controls: %d\n",
+				__func__, mix_index, nr_controls);
+			break;
+		}
+		for (chn = 1; chn <= dig_ctl_info.ctrl_array_size;
+			chn++) {
+			if (mix_index >= nr_controls) {
+				dev_dbg(pcm_dev->dev,
+					"%s: mix_idx = %d nr_controls = %d\n",
+					__func__, mix_index,
+					nr_controls);
+				break;
+			}
+			name = devm_kzalloc(pcm_dev->dev,
+				SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL);
+			if (!name) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+				"%s-i2c-%d-dev%d-ch%d-digi-gain",
+				pcm_dev->dev_name, adap->nr, i, chn);
+			pcmdev_controls[mix_index].tlv.p = dig_ctl_info.gain;
+			dig_ctl_info.pcmdev_ctrl[chn - 1].dev_no = i;
+			pcmdev_controls[mix_index].private_value =
+				(unsigned long)
+				&dig_ctl_info.pcmdev_ctrl[chn - 1];
+			pcmdev_controls[mix_index].name = name;
+			pcmdev_controls[mix_index].access =
+				SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+				SNDRV_CTL_ELEM_ACCESS_READWRITE;
+			pcmdev_controls[mix_index].iface =
+				SNDRV_CTL_ELEM_IFACE_MIXER;
+			pcmdev_controls[mix_index].info = pcmdevice_info_volsw;
+			pcmdev_controls[mix_index].get = pcm1690_get_volsw;
+			pcmdev_controls[mix_index].put = pcm1690_put_volsw;
+			mix_index++;
+		}
+	}
+
+	for (i = 0; i < pcm_dev->ndev; i++) {
+		if (mix_index >= nr_controls) {
+			dev_dbg(pcm_dev->dev,
+				"%s: mix_index = %d nr_controls = %d\n",
+				__func__, mix_index, nr_controls);
+			break;
+		}
+		for (chn = 1; chn <= fine_dig_ctl_info.ctrl_array_size;
+			chn++) {
+			if (mix_index >= nr_controls) {
+				dev_dbg(pcm_dev->dev,
+					"%s: mix_idx = %d nr_controls = %d\n",
+					__func__, mix_index, nr_controls);
+				break;
+			}
+			name = devm_kzalloc(pcm_dev->dev,
+				SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL);
+			if (!name) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+				"%s-i2c-%d-dev%d-ch%d-fine-digi-gain",
+				pcm_dev->dev_name, adap->nr, i, chn);
+			pcmdev_controls[mix_index].tlv.p =
+				fine_dig_ctl_info.gain;
+			fine_dig_ctl_info.pcmdev_ctrl[chn - 1].dev_no = i;
+			pcmdev_controls[mix_index].private_value =
+				(unsigned long)
+				&fine_dig_ctl_info.pcmdev_ctrl[chn - 1];
+			pcmdev_controls[mix_index].name = name;
+			pcmdev_controls[mix_index].access =
+				SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+				SNDRV_CTL_ELEM_ACCESS_READWRITE;
+			pcmdev_controls[mix_index].iface =
+				SNDRV_CTL_ELEM_IFACE_MIXER;
+			pcmdev_controls[mix_index].info = pcmdevice_info_volsw;
+			pcmdev_controls[mix_index].get =
+				pcm1690_get_finevolsw;
+			pcmdev_controls[mix_index].put =
+				pcm1690_put_finevolsw;
+			mix_index++;
+		}
+	}
+
+	ret = snd_soc_add_component_controls(pcm_dev->component,
+		pcmdev_controls,
+		nr_controls < mix_index ? nr_controls : mix_index);
+	if (ret) {
+		dev_err(pcm_dev->dev,
+			"%s: add_component_controls error = %d\n",
+			__func__, ret);
+		goto out;
+	}
+	pcm_dev->pcm_ctrl.nr_controls =
+		nr_controls < mix_index ? nr_controls : mix_index;
+out:
+	return ret;
+}
+
+static void pcm9211_sw_rst(struct pcmdevice_priv *pcm_dev)
+{
+	int ret, i;
+
+	for (i = 0; i < pcm_dev->ndev; i++) {
+		ret = pcmdev_dev_update_bits(pcm_dev, i,
+			PCM9211_REG_SW_CTRL, PCM9211_REG_SW_CTRL_MRST_MSK,
+			PCM9211_REG_SW_CTRL_MRST);
+		if (ret < 0)
+			dev_err(pcm_dev->dev, "%s: dev %d swreset fail, %d\n",
+				__func__, i, ret);
+	}
+}
+
+static void pcmdevice_sw_rst(struct pcmdevice_priv *pcm_dev)
+{
+	int ret, i;
+
+	for (i = 0; i < pcm_dev->ndev; i++) {
+		ret = pcmdev_dev_write(pcm_dev, i, PCMDEVICE_REG_SWRESET,
+			PCMDEVICE_REG_SWRESET_RESET);
+		if (ret < 0)
+			dev_err(pcm_dev->dev, "%s: dev %d swreset fail, %d\n",
+				__func__, i, ret);
+	}
+}
+
+static struct pcmdevice_config_info *pcmdevice_add_config(void *ctxt,
+	const unsigned char *config_data, unsigned int config_size,
+	int *status)
+{
+	struct pcmdevice_priv *pcm_dev = (struct pcmdevice_priv *)ctxt;
+	struct pcmdevice_config_info *cfg_info;
+	struct pcmdevice_block_data **bk_da;
+	unsigned int config_offset = 0, i;
+
+	cfg_info = kzalloc(sizeof(struct pcmdevice_config_info), GFP_KERNEL);
+	if (!cfg_info) {
+		*status = -ENOMEM;
+		dev_err(pcm_dev->dev, "add config: cfg_info alloc failed!\n");
+		goto out;
+	}
+
+	if (pcm_dev->regbin.fw_hdr.binary_version_num >= 0x105) {
+		if (config_offset + 64 > (int)config_size) {
+			*status = -EINVAL;
+			dev_err(pcm_dev->dev, "add config: Out of boundary\n");
+			goto out;
+		}
+		memcpy(cfg_info->cfg_name, &config_data[config_offset], 64);
+		config_offset += 64;
+	}
+
+	if (config_offset + 4 > config_size) {
+		*status = -EINVAL;
+		dev_err(pcm_dev->dev, "add config: Out of boundary\n");
+		goto out;
+	}
+	cfg_info->nblocks =
+		be32_to_cpup((__be32 *)&config_data[config_offset]);
+	config_offset += 4;
+
+	bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks,
+		sizeof(struct pcmdevice_block_data *), GFP_KERNEL);
+	if (!bk_da) {
+		*status = -ENOMEM;
+		goto out;
+	}
+	cfg_info->real_nblocks = 0;
+	for (i = 0; i < cfg_info->nblocks; i++) {
+		if (config_offset + 12 > config_size) {
+			*status = -EINVAL;
+			dev_err(pcm_dev->dev,
+				"%s: Out of boundary: i = %d nblocks = %u!\n",
+				__func__, i, cfg_info->nblocks);
+			break;
+		}
+		bk_da[i] = kzalloc(sizeof(struct pcmdevice_block_data),
+			GFP_KERNEL);
+		if (!bk_da[i]) {
+			*status = -ENOMEM;
+			break;
+		}
+		bk_da[i]->dev_idx = config_data[config_offset];
+		config_offset++;
+
+		bk_da[i]->block_type = config_data[config_offset];
+		config_offset++;
+
+		if (bk_da[i]->block_type == PCMDEVICE_BIN_BLK_PRE_POWER_UP) {
+			if (bk_da[i]->dev_idx == 0)
+				cfg_info->active_dev =
+					(1 << pcm_dev->ndev) - 1;
+			else
+				cfg_info->active_dev =
+					1 << (bk_da[i]->dev_idx - 1);
+		}
+
+		bk_da[i]->yram_checksum =
+			be16_to_cpup((__be16 *)&config_data[config_offset]);
+		config_offset += 2;
+		bk_da[i]->block_size =
+			be32_to_cpup((__be32 *)&config_data[config_offset]);
+		config_offset += 4;
+
+		bk_da[i]->n_subblks =
+			be32_to_cpup((__be32 *)&config_data[config_offset]);
+
+		config_offset += 4;
+
+		if (config_offset + bk_da[i]->block_size > config_size) {
+			*status = -EINVAL;
+			dev_err(pcm_dev->dev,
+				"%s: Out of boundary: i = %d blks = %u!\n",
+				__func__, i, cfg_info->nblocks);
+			break;
+		}
+
+		bk_da[i]->regdata = kmemdup(&config_data[config_offset],
+			bk_da[i]->block_size, GFP_KERNEL);
+		if (!bk_da[i]->regdata) {
+			*status = -ENOMEM;
+			goto out;
+		}
+		config_offset += bk_da[i]->block_size;
+		cfg_info->real_nblocks += 1;
+	}
+out:
+	return cfg_info;
+}
+
+static int pcmdev_ctrl_add(struct pcmdevice_priv *pcm_dev)
+{
+	struct i2c_adapter *adap = pcm_dev->client->adapter;
+	struct pcmdev_ctrl_info analog_ctl_info = {0};
+	struct pcmdev_ctrl_info dig_ctl_info = {0};
+	struct snd_kcontrol_new *pcmdev_controls;
+	int nr_controls = 1, ret = 0;
+	int mix_index = 0, dev, chn;
+	char *name;
+
+	switch (pcm_dev->chip_id) {
+	case ADC3120:
+	case ADC5120:
+	case ADC6120:
+	case PCM3120:
+	case PCM5120:
+	case PCM6120:
+		dig_ctl_info.gain = adc5120_fgain_tlv;
+		analog_ctl_info.gain = adc5120_chgain_tlv;
+		analog_ctl_info.pcmdev_ctrl = adc5120_analog_gain_ctl;
+		analog_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(adc5120_analog_gain_ctl);
+		dig_ctl_info.pcmdev_ctrl = adc5120_digital_gain_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(adc5120_digital_gain_ctl);
+		break;
+	case PCM3140:
+	case PCM5140:
+	case PCM6140:
+	case PCM6240:
+		dig_ctl_info.gain = pcm6260_fgain_tlv;
+		analog_ctl_info.gain = pcm6260_chgain_tlv;
+		analog_ctl_info.pcmdev_ctrl = pcm6240_analog_gain_ctl;
+		analog_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcm6240_analog_gain_ctl);
+		dig_ctl_info.pcmdev_ctrl = pcm6240_digital_gain_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcm6240_digital_gain_ctl);
+		break;
+	case PCM6260:
+		dig_ctl_info.gain = pcm6260_fgain_tlv;
+		analog_ctl_info.gain = pcm6260_chgain_tlv;
+		analog_ctl_info.pcmdev_ctrl = pcm6260_analog_gain_ctl;
+		analog_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcm6260_analog_gain_ctl);
+		dig_ctl_info.pcmdev_ctrl = pcm6260_digital_gain_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcm6260_digital_gain_ctl);
+		break;
+	case PCM9211:
+		dig_ctl_info.gain = pcm9211_dig_gain_tlv;
+		dig_ctl_info.pcmdev_ctrl = pcm9211_digital_gain_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcm9211_digital_gain_ctl);
+		break;
+	case PCMD3140:
+		dig_ctl_info.gain = pcmd3140_dig_gain_tlv;
+		dig_ctl_info.pcmdev_ctrl = pcmd3140_digital_gain_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcmd3140_digital_gain_ctl);
+		break;
+	case PCMD3180:
+		dig_ctl_info.gain = pcmd3180_dig_gain_tlv;
+		dig_ctl_info.pcmdev_ctrl = pcmd3180_digital_gain_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(pcmd3180_digital_gain_ctl);
+		break;
+	case TAA5212:
+	case TAA5412:
+		analog_ctl_info.gain = taa5412_fine_gain_tlv;
+		analog_ctl_info.pcmdev_ctrl = taa5412_fine_gain_ctl;
+		analog_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(taa5412_fine_gain_ctl);
+		dig_ctl_info.gain = taa5412_dig_vol_tlv;
+		dig_ctl_info.pcmdev_ctrl = taa5412_digital_volume_ctl;
+		dig_ctl_info.ctrl_array_size =
+			ARRAY_SIZE(taa5412_digital_volume_ctl);
+		break;
+	}
+
+	nr_controls += pcm_dev->ndev * (dig_ctl_info.ctrl_array_size +
+		analog_ctl_info.ctrl_array_size);
+	pcmdev_controls = devm_kzalloc(pcm_dev->dev,
+		nr_controls * sizeof(struct snd_kcontrol_new),
+		GFP_KERNEL);
+	if (!pcmdev_controls) {
+		ret = -ENOMEM;
+		pcm_dev->pcm_ctrl.pcmdevice_profile_controls = NULL;
+		goto out;
+	}
+	pcm_dev->pcm_ctrl.pcmdevice_profile_controls = pcmdev_controls;
+	/* Create a mixer item for selecting the active profile */
+	name = devm_kzalloc(pcm_dev->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+		GFP_KERNEL);
+	if (!name) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "PCMDEVICE Profile id");
+	pcmdev_controls[mix_index].name = name;
+	pcmdev_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+	pcmdev_controls[mix_index].info = pcmdevice_info_profile;
+	pcmdev_controls[mix_index].get = pcmdevice_get_profile_id;
+	pcmdev_controls[mix_index].put = pcmdevice_set_profile_id;
+	mix_index++;
+
+	if (analog_ctl_info.ctrl_array_size == 0)
+		goto dig_ctrl;
+
+	for (dev = 0; dev < pcm_dev->ndev; dev++) {
+		if (mix_index >= nr_controls) {
+			dev_dbg(pcm_dev->dev, "mix_idx: %d nr_controls = %d\n",
+				mix_index, nr_controls);
+			break;
+		}
+		for (chn = 1; chn <= analog_ctl_info.ctrl_array_size;
+			chn++) {
+			if (mix_index >= nr_controls) {
+				dev_dbg(pcm_dev->dev,
+					"%s: mix_idx = %d nr_controls = %d\n",
+					__func__, mix_index,
+					nr_controls);
+				break;
+			}
+			name = devm_kzalloc(pcm_dev->dev,
+				SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL);
+			if (!name) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+				(pcm_dev->chip_id != TAA5412) ?
+				"%s-i2c-%d-dev%d-ch%d-ana-gain" :
+				"%s-i2c-%d-dev%d-ch%d-fine-gain",
+				pcm_dev->dev_name, adap->nr, dev, chn);
+			pcmdev_controls[mix_index].tlv.p =
+				analog_ctl_info.gain;
+			analog_ctl_info.pcmdev_ctrl[chn - 1].dev_no = dev;
+			pcmdev_controls[mix_index].private_value =
+				(unsigned long)
+				&analog_ctl_info.pcmdev_ctrl[chn - 1];
+			pcmdev_controls[mix_index].name = name;
+			pcmdev_controls[mix_index].access =
+				SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+				SNDRV_CTL_ELEM_ACCESS_READWRITE;
+			pcmdev_controls[mix_index].iface =
+				SNDRV_CTL_ELEM_IFACE_MIXER;
+			pcmdev_controls[mix_index].info = pcmdevice_info_volsw;
+			pcmdev_controls[mix_index].get = pcmdevice_get_volsw;
+			pcmdev_controls[mix_index].put = pcmdevice_put_volsw;
+			mix_index++;
+		}
+	}
+
+dig_ctrl:
+	if (dig_ctl_info.ctrl_array_size == 0)
+		goto add_ctrls;
+
+	for (dev = 0; dev < pcm_dev->ndev; dev++) {
+		if (mix_index >= nr_controls) {
+			dev_dbg(pcm_dev->dev, "%s: mix_idx: %d nr_ctrls: %d\n",
+				__func__, mix_index, nr_controls);
+			break;
+		}
+		for (chn = 1; chn <= dig_ctl_info.ctrl_array_size; chn++) {
+			if (mix_index >= nr_controls) {
+				dev_dbg(pcm_dev->dev,
+					"%s: mix_idx: %d nr_ctrls: %d\n",
+					__func__, mix_index, nr_controls);
+				break;
+			}
+			name = devm_kzalloc(pcm_dev->dev,
+				SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL);
+			if (!name) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN,
+				"%s-i2c-%d-dev%d-ch%d-digi-gain",
+				pcm_dev->dev_name, adap->nr, dev, chn);
+			pcmdev_controls[mix_index].tlv.p = dig_ctl_info.gain;
+			dig_ctl_info.pcmdev_ctrl[chn - 1].dev_no = dev;
+			pcmdev_controls[mix_index].private_value =
+					(unsigned long)
+					&dig_ctl_info.pcmdev_ctrl[chn - 1];
+			pcmdev_controls[mix_index].name = name;
+			pcmdev_controls[mix_index].access =
+				SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+				SNDRV_CTL_ELEM_ACCESS_READWRITE;
+			pcmdev_controls[mix_index].iface =
+				SNDRV_CTL_ELEM_IFACE_MIXER;
+			pcmdev_controls[mix_index].info = pcmdevice_info_volsw;
+			pcmdev_controls[mix_index].get = pcmdevice_get_volsw;
+			pcmdev_controls[mix_index].put = pcmdevice_put_volsw;
+			mix_index++;
+		}
+	}
+
+add_ctrls:
+	ret = snd_soc_add_component_controls(pcm_dev->component,
+		pcmdev_controls,
+		nr_controls < mix_index ? nr_controls : mix_index);
+	if (ret) {
+		dev_err(pcm_dev->dev, "%s: add_controls error = %d\n",
+			__func__, ret);
+		goto out;
+	}
+	pcm_dev->pcm_ctrl.nr_controls =
+		nr_controls < mix_index ? nr_controls : mix_index;
+out:
+	return ret;
+}
+
+static int pcmdevice_create_controls(struct pcmdevice_priv *pcm_dev)
+{
+	int ret;
+
+	if (pcm_dev->chip_id == PCM1690)
+		ret = pcm1690_ctrl_add(pcm_dev);
+	else
+		ret = pcmdev_ctrl_add(pcm_dev);
+
+	return ret;
+}
+
+static void pcmdevice_config_info_remove(void *pContext)
+{
+	struct pcmdevice_priv *pcm_dev = (struct pcmdevice_priv *) pContext;
+	struct pcmdevice_regbin *regbin = &(pcm_dev->regbin);
+	struct pcmdevice_config_info **cfg_info = regbin->cfg_info;
+	int i, j;
+
+	if (!cfg_info)
+		return;
+	for (i = 0; i < regbin->ncfgs; i++) {
+		if (!cfg_info[i])
+			continue;
+		if (cfg_info[i]->blk_data) {
+			for (j = 0; j < (int)cfg_info[i]->real_nblocks; j++) {
+				if (!cfg_info[i]->blk_data[j])
+					continue;
+				kfree(cfg_info[i]->blk_data[j]->regdata);
+				kfree(cfg_info[i]->blk_data[j]);
+			}
+			kfree(cfg_info[i]->blk_data);
+		}
+		kfree(cfg_info[i]);
+	}
+	kfree(cfg_info);
+}
+
+static void pcmdev_regbin_ready(const struct firmware *fmw, void *ctxt)
+{
+	struct pcmdevice_config_info **cfg_info;
+	struct pcmdevice_priv *pcm_dev = ctxt;
+	struct pcmdevice_regbin_hdr *fw_hdr;
+	struct pcmdevice_regbin *regbin;
+	unsigned int total_config_sz = 0;
+	int offset = 0, ret = 0, i;
+	unsigned char *buf;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	regbin = &(pcm_dev->regbin);
+	fw_hdr = &(regbin->fw_hdr);
+	if (!fmw || !fmw->data) {
+		dev_err(pcm_dev->dev, "Failed to read %s\n",
+			pcm_dev->regbin_name);
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+	buf = (unsigned char *)fmw->data;
+
+	fw_hdr->img_sz = be32_to_cpup((__be32 *)&buf[offset]);
+	offset += 4;
+	if (fw_hdr->img_sz != fmw->size) {
+		dev_err(pcm_dev->dev, "File size not match, %d %u",
+			(int)fmw->size, fw_hdr->img_sz);
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+
+	fw_hdr->checksum = be32_to_cpup((__be32 *)&buf[offset]);
+	offset += 4;
+	fw_hdr->binary_version_num = be32_to_cpup((__be32 *)&buf[offset]);
+	if (fw_hdr->binary_version_num < 0x103) {
+		dev_err(pcm_dev->dev, "Bin version 0x%04x is out of date",
+			fw_hdr->binary_version_num);
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+	offset += 4;
+	fw_hdr->drv_fw_version = be32_to_cpup((__be32 *)&buf[offset]);
+	offset += 8;
+	fw_hdr->plat_type = buf[offset];
+	offset += 1;
+	fw_hdr->dev_family = buf[offset];
+	offset += 1;
+	fw_hdr->reserve = buf[offset];
+	offset += 1;
+	fw_hdr->ndev = buf[offset];
+	offset += 1;
+	if (fw_hdr->ndev != pcm_dev->ndev) {
+		dev_err(pcm_dev->dev, "Invalid ndev(%u)\n", fw_hdr->ndev);
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+
+	if (offset + PCMDEVICE_DEVICE_SUM > fw_hdr->img_sz) {
+		dev_err(pcm_dev->dev, "regbin_ready: Out of boundary!\n");
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+
+	for (i = 0; i < PCMDEVICE_DEVICE_SUM; i++, offset++)
+		fw_hdr->devs[i] = buf[offset];
+
+	fw_hdr->nconfig = be32_to_cpup((__be32 *)&buf[offset]);
+	offset += 4;
+
+	for (i = 0; i < PCMDEVICE_CONFIG_SUM; i++) {
+		fw_hdr->config_size[i] = be32_to_cpup((__be32 *)&buf[offset]);
+		offset += 4;
+		total_config_sz += fw_hdr->config_size[i];
+	}
+
+	if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) {
+		dev_err(pcm_dev->dev, "Bin file error!\n");
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+	cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL);
+	if (!cfg_info) {
+		pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+		goto out;
+	}
+	regbin->cfg_info = cfg_info;
+	regbin->ncfgs = 0;
+	for (i = 0; i < (int)fw_hdr->nconfig; i++) {
+		cfg_info[i] = pcmdevice_add_config(ctxt, &buf[offset],
+				fw_hdr->config_size[i], &ret);
+		if (ret) {
+			/* In case the bin file is partially destroyed. */
+			if (regbin->ncfgs == 0)
+				pcm_dev->fw_state = PCMDEVICE_FW_LOAD_FAILED;
+			break;
+		}
+		offset += (int)fw_hdr->config_size[i];
+		regbin->ncfgs += 1;
+	}
+	if (pcm_dev->fw_state == PCMDEVICE_FW_LOAD_OK)
+		pcmdevice_create_controls(pcm_dev);
+out:
+	if (pcm_dev->fw_state == PCMDEVICE_FW_LOAD_FAILED)
+		pcmdevice_config_info_remove(pcm_dev);
+
+	mutex_unlock(&pcm_dev->codec_lock);
+	if (fmw)
+		release_firmware(fmw);
+}
+
+static int pcmdevice_codec_probe(struct snd_soc_component *codec)
+{
+	struct pcmdevice_priv *pcm_dev = snd_soc_component_get_drvdata(codec);
+	struct i2c_adapter *adap = pcm_dev->client->adapter;
+	int ret;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	pcm_dev->component = codec;
+	pcm_dev->fw_state = PCMDEVICE_FW_LOAD_OK;
+	strscpy(pcm_dev->dev_name, pcmdevice_i2c_id[pcm_dev->chip_id].name,
+		sizeof(pcm_dev->dev_name));
+
+	/* device-name[defined in pcmdevice_i2c_id]-i2c-bus_id[0,1,...,N]-
+	 * sum[1,2,...,4]dev-reg.bin stores the firmware including register
+	 * setting and params for different filters inside chips, it must be
+	 * copied into firmware folder. The same types of pcmdevices sitting
+	 * on the same i2c bus will be aggregated as one single codec,
+	 * all of them share the same bin file.
+	 */
+	scnprintf(pcm_dev->regbin_name, PCMDEVICE_REGBIN_FILENAME_LEN,
+		"%s-i2c-%d-%udev-reg.bin", pcm_dev->dev_name, adap->nr,
+		pcm_dev->ndev);
+
+	ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
+		pcm_dev->regbin_name, pcm_dev->dev, GFP_KERNEL, pcm_dev,
+		pcmdev_regbin_ready);
+	if (ret) {
+		dev_err(pcm_dev->dev, "load %s error = %d\n",
+			pcm_dev->regbin_name, ret);
+		goto out;
+	}
+
+	if (pcm_dev->hw_rst) {
+		gpiod_set_value_cansleep(pcm_dev->hw_rst, 0);
+		usleep_range(500, 1000);
+		gpiod_set_value_cansleep(pcm_dev->hw_rst, 1);
+	} else {
+		if (pcm_dev->sw_rst)
+			pcm_dev->sw_rst(pcm_dev);
+	}
+
+out:
+	mutex_unlock(&pcm_dev->codec_lock);
+	return ret;
+}
+
+
+static void pcmdevice_codec_remove(struct snd_soc_component *codec)
+{
+	struct pcmdevice_priv *pcm_dev = snd_soc_component_get_drvdata(codec);
+
+	if (!pcm_dev)
+		return;
+	mutex_lock(&pcm_dev->codec_lock);
+	pcmdevice_config_info_remove(pcm_dev);
+	mutex_unlock(&pcm_dev->codec_lock);
+}
+
+static const struct snd_soc_dapm_widget pcmdevice_dapm_widgets[] = {
+	SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("ASI1 OUT", "ASI1 Capture",
+		0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_OUTPUT("OUT"),
+	SND_SOC_DAPM_INPUT("MIC"),
+};
+
+static const struct snd_soc_dapm_route pcmdevice_audio_map[] = {
+	{"OUT", NULL, "ASI"},
+	{"ASI1 OUT", NULL, "MIC"},
+};
+
+static const struct snd_soc_component_driver
+	soc_codec_driver_pcmdevice = {
+	.probe			= pcmdevice_codec_probe,
+	.remove			= pcmdevice_codec_remove,
+	.dapm_widgets		= pcmdevice_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(pcmdevice_dapm_widgets),
+	.dapm_routes		= pcmdevice_audio_map,
+	.num_dapm_routes	= ARRAY_SIZE(pcmdevice_audio_map),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 0,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static int pcmdevice_process_block(void *ctxt, unsigned char *data,
+	unsigned char dev_idx, int sublocksize)
+{
+	struct pcmdevice_priv *pcm_dev = (struct pcmdevice_priv *)ctxt;
+	int subblk_offset = 2, chn, chnend, rc;
+	unsigned char subblk_typ = data[1];
+
+	if (dev_idx) {
+		chn = dev_idx - 1;
+		chnend = dev_idx;
+	} else {
+		chn = 0;
+		chnend = pcm_dev->ndev;
+	}
+
+	for (; chn < chnend; chn++) {
+		switch (subblk_typ) {
+		case PCMDEVICE_CMD_SING_W: {
+			unsigned short len = be16_to_cpup((__be16 *)&data[2]);
+			int i = 0;
+
+			subblk_offset += 2;
+			if (subblk_offset + 4 * len > sublocksize) {
+				dev_err(pcm_dev->dev,
+					"process_block: Out of boundary\n");
+				break;
+			}
+
+			for (i = 0; i < len; i++) {
+				rc = pcmdev_dev_write(pcm_dev, chn,
+					PCMDEVICE_REG(data[subblk_offset + 1],
+						data[subblk_offset + 2]),
+					data[subblk_offset + 3]);
+				if (rc < 0)
+					dev_err(pcm_dev->dev,
+						"single write error\n");
+
+				subblk_offset += 4;
+			}
+		}
+		break;
+		case PCMDEVICE_CMD_BURST: {
+			unsigned short len = be16_to_cpup((__be16 *)&data[2]);
+
+			subblk_offset += 2;
+			if (subblk_offset + 4 + len > sublocksize) {
+				dev_err(pcm_dev->dev,
+					"BURST Out of boundary\n");
+				break;
+			}
+			if (len % 4) {
+				dev_err(pcm_dev->dev,
+					"Bst-len(%u)not div by 4\n", len);
+				break;
+			}
+			rc = pcmdev_dev_bulk_write(pcm_dev, chn,
+				PCMDEVICE_REG(data[subblk_offset + 1],
+				data[subblk_offset + 2]),
+				&(data[subblk_offset + 4]), len);
+			if (rc < 0)
+				dev_err(pcm_dev->dev,
+					"bulk_write error = %d\n", rc);
+
+			subblk_offset += (len + 4);
+		}
+			break;
+		case PCMDEVICE_CMD_DELAY: {
+			unsigned int delay_time = 0;
+
+			if (subblk_offset + 2 > sublocksize) {
+				dev_err(pcm_dev->dev,
+					"deley Out of boundary\n");
+				break;
+			}
+			delay_time = be16_to_cpup((__be16 *)&data[2]) * 1000;
+			usleep_range(delay_time, delay_time + 50);
+			subblk_offset += 2;
+		}
+			break;
+		case PCMDEVICE_CMD_FIELD_W:
+		if (subblk_offset + 6 > sublocksize) {
+			dev_err(pcm_dev->dev,
+				"process_block: bit write Out of memory\n");
+			break;
+		}
+			rc = pcmdev_dev_update_bits(pcm_dev, chn,
+				PCMDEVICE_REG(data[subblk_offset + 3],
+				data[subblk_offset + 4]),
+				data[subblk_offset + 1],
+				data[subblk_offset + 5]);
+		if (rc < 0)
+			dev_err(pcm_dev->dev,
+				"process_block: update_bits error = %d\n", rc);
+
+		subblk_offset += 6;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return subblk_offset;
+}
+
+
+static void pcmdevice_select_cfg_blk(void *ctxt, int conf_no,
+	unsigned char block_type)
+{
+	struct pcmdevice_priv *pcm_dev = (struct pcmdevice_priv *)ctxt;
+	struct pcmdevice_regbin *regbin = &(pcm_dev->regbin);
+	struct pcmdevice_config_info **cfg_info = regbin->cfg_info;
+	struct pcmdevice_block_data **blk_data;
+	int j, k, chn, chnend;
+
+	if (conf_no >= regbin->ncfgs || conf_no < 0 || NULL == cfg_info) {
+		dev_err(pcm_dev->dev, "conf_no should be less than %u\n",
+			regbin->ncfgs);
+		goto out;
+	}
+	blk_data = cfg_info[conf_no]->blk_data;
+
+	for (j = 0; j < (int)cfg_info[conf_no]->real_nblocks; j++) {
+		unsigned int length = 0, rc = 0;
+
+		if (block_type > 5 || block_type < 2) {
+			dev_err(pcm_dev->dev,
+				"block_type should be in range from 2 to 5\n");
+			goto out;
+		}
+		if (block_type != blk_data[j]->block_type)
+			continue;
+
+		for (k = 0; k < (int)blk_data[j]->n_subblks; k++) {
+			if (blk_data[j]->dev_idx) {
+				chn = blk_data[j]->dev_idx - 1;
+				chnend = blk_data[j]->dev_idx;
+			} else {
+				chn = 0;
+				chnend = pcm_dev->ndev;
+			}
+
+			rc = pcmdevice_process_block(pcm_dev,
+				blk_data[j]->regdata + length,
+				blk_data[j]->dev_idx,
+				blk_data[j]->block_size - length);
+			length += rc;
+			if (blk_data[j]->block_size < length) {
+				dev_err(pcm_dev->dev,
+					"%s: %u %u out of boundary\n",
+					__func__, length,
+					blk_data[j]->block_size);
+				break;
+			}
+		}
+		if (length != blk_data[j]->block_size)
+			dev_err(pcm_dev->dev, "%s: %u %u size is not same\n",
+				__func__, length, blk_data[j]->block_size);
+	}
+
+out:
+	return;
+}
+
+static int pcmdevice_mute(struct snd_soc_dai *dai, int mute, int stream)
+{
+	struct snd_soc_component *codec = dai->component;
+	struct pcmdevice_priv *pcm_dev = snd_soc_component_get_drvdata(codec);
+	unsigned char block_type;
+
+	if (pcm_dev->fw_state == PCMDEVICE_FW_LOAD_FAILED) {
+		dev_err(pcm_dev->dev, "DSP bin file not loaded\n");
+		return -EINVAL;
+	}
+
+	if (mute)
+		block_type = PCMDEVICE_BIN_BLK_PRE_SHUTDOWN;
+	else
+		block_type = PCMDEVICE_BIN_BLK_PRE_POWER_UP;
+
+	mutex_lock(&pcm_dev->codec_lock);
+	pcmdevice_select_cfg_blk(pcm_dev, pcm_dev->cur_conf, block_type);
+	mutex_unlock(&pcm_dev->codec_lock);
+	return 0;
+}
+
+static int pcmdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	struct pcmdevice_priv *pcm_dev = snd_soc_dai_get_drvdata(codec_dai);
+
+	pcm_dev->sysclk = freq;
+
+	return 0;
+}
+
+static int pcmdevice_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct pcmdevice_priv *pcm_dev = snd_soc_dai_get_drvdata(dai);
+	unsigned int fsrate;
+	unsigned int slot_width;
+	int bclk_rate;
+	int rc = 0;
+
+	fsrate = params_rate(params);
+	switch (fsrate) {
+	case 48000:
+		break;
+	case 44100:
+		break;
+	default:
+		dev_err(pcm_dev->dev,
+			"%s: incorrect sample rate = %u\n",
+			__func__, fsrate);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	slot_width = params_width(params);
+	switch (slot_width) {
+	case 16:
+		break;
+	case 20:
+		break;
+	case 24:
+		break;
+	case 32:
+		break;
+	default:
+		dev_err(pcm_dev->dev, "%s: incorrect slot width = %u\n",
+			__func__, slot_width);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	bclk_rate = snd_soc_params_to_bclk(params);
+	if (bclk_rate < 0) {
+		dev_err(pcm_dev->dev, "%s: incorrect bclk rate = %d\n",
+			__func__, bclk_rate);
+		rc = bclk_rate;
+		goto out;
+	}
+
+out:
+	return rc;
+}
+
+static int pcmdevice_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *codec = dai->component;
+	struct pcmdevice_priv *pcm_priv = snd_soc_component_get_drvdata(codec);
+	int ret = 0;
+
+	if (pcm_priv->fw_state != PCMDEVICE_FW_LOAD_OK) {
+		dev_err(pcm_priv->dev, "DSP bin file not loaded\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct snd_soc_dai_ops pcmdevice_dai_ops = {
+	.mute_stream = pcmdevice_mute,
+	.startup = pcmdevice_startup,
+	.hw_params = pcmdevice_hw_params,
+	.set_sysclk = pcmdevice_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver pcmdevice_dai_driver[] = {
+	{
+		.name = "pcmdevice-codec",
+		.capture = {
+			.stream_name	 = "Capture",
+			.channels_min	 = 2,
+			.channels_max	 = PCMDEVICE_MAX_CHANNELS,
+			.rates		 = PCMDEVICE_RATES,
+			.formats	 = PCMDEVICE_FORMATS,
+		},
+		.playback = {
+			.stream_name	 = "Playback",
+			.channels_min	 = 2,
+			.channels_max	 = PCMDEVICE_MAX_CHANNELS,
+			.rates		 = PCMDEVICE_RATES,
+			.formats	 = PCMDEVICE_FORMATS,
+		},
+		.ops = &pcmdevice_dai_ops,
+		.symmetric_rate = 1,
+	}
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcmdevice_of_match[] = {
+	{ .compatible = "ti,adc3120"  },
+	{ .compatible = "ti,adc5120"  },
+	{ .compatible = "ti,adc6120"  },
+	{ .compatible = "ti,dix4192"  },
+	{ .compatible = "ti,pcm1690"  },
+	{ .compatible = "ti,pcm3120"  },
+	{ .compatible = "ti,pcm3140"  },
+	{ .compatible = "ti,pcm5120"  },
+	{ .compatible = "ti,pcm5140"  },
+	{ .compatible = "ti,pcm6120"  },
+	{ .compatible = "ti,pcm6140"  },
+	{ .compatible = "ti,pcm6240"  },
+	{ .compatible = "ti,pcm6260"  },
+	{ .compatible = "ti,pcm9211"  },
+	{ .compatible = "ti,pcmd3140" },
+	{ .compatible = "ti,pcmd3180" },
+	{ .compatible = "ti,pcmd512x" },
+	{ .compatible = "ti,taa5212"  },
+	{ .compatible = "ti,taa5412"  },
+	{ .compatible = "ti,tad5212"  },
+	{ .compatible = "ti,tad5412"  },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pcmdevice_of_match);
+#endif
+
+static const struct regmap_range_cfg pcmdevice_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 256 * 128,
+		.selector_reg = PCMDEVICE_PAGE_SELECT,
+		.selector_mask = 0xff,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 128,
+	},
+};
+
+static const struct regmap_config pcmdevice_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.ranges = pcmdevice_ranges,
+	.num_ranges = ARRAY_SIZE(pcmdevice_ranges),
+	.max_register = 256 * 128,
+};
+
+static void pcmdevice_remove(struct pcmdevice_priv *pcm_dev)
+{
+	if (gpio_is_valid(pcm_dev->irq_info.gpio)) {
+		gpio_free(pcm_dev->irq_info.gpio);
+		free_irq(pcm_dev->irq_info.nmb, pcm_dev);
+	}
+	mutex_destroy(&pcm_dev->codec_lock);
+}
+
+static int pcmdevice_i2c_probe(struct i2c_client *i2c)
+{
+	const struct i2c_device_id *id = i2c_match_id(pcmdevice_i2c_id, i2c);
+	struct pcmdevice_priv *pcm_dev;
+	struct device_node *np;
+	unsigned int dev_addrs[PCMDEVICE_MAX_DEVICES];
+	int ret = 0, i = 0, ndev = 0;
+#ifdef CONFIG_OF
+	const __be32 *reg, *reg_end;
+	int len, sw, aw;
+#endif
+
+	pcm_dev = devm_kzalloc(&i2c->dev, sizeof(*pcm_dev), GFP_KERNEL);
+	if (!pcm_dev) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	pcm_dev->chip_id = (id != NULL) ? id->driver_data : 0;
+
+	pcm_dev->dev = &i2c->dev;
+	pcm_dev->client = i2c;
+
+	if (pcm_dev->chip_id >= MAX_DEVICE)
+		pcm_dev->chip_id = 0;
+
+	pcm_dev->regmap = devm_regmap_init_i2c(i2c,
+		&pcmdevice_i2c_regmap);
+	if (IS_ERR(pcm_dev->regmap)) {
+		ret = PTR_ERR(pcm_dev->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		goto out;
+	}
+
+	np = pcm_dev->dev->of_node;
+#ifdef CONFIG_OF
+	aw = of_n_addr_cells(np);
+	sw = of_n_size_cells(np);
+	if (sw == 0) {
+		reg = (const __be32 *)of_get_property(np,
+			"reg", &len);
+		reg_end = reg + len/sizeof(*reg);
+		ndev = 0;
+		do {
+			dev_addrs[ndev] = of_read_number(reg, aw);
+			reg += aw;
+			ndev++;
+		} while (reg < reg_end);
+	} else {
+		ndev = 1;
+		dev_addrs[0] = i2c->addr;
+	}
+#else
+	ndev = 1;
+	dev_addrs[0] = i2c->addr;
+#endif
+	pcm_dev->irq_info.gpio = of_irq_get(np, 0);
+
+	for (i = 0; i < ndev; i++)
+		pcm_dev->addr[i] = dev_addrs[i];
+
+	pcm_dev->ndev = ndev;
+
+	pcm_dev->hw_rst = devm_gpiod_get_optional(&i2c->dev,
+			"reset-gpios", GPIOD_OUT_HIGH);
+	if (IS_ERR(pcm_dev->hw_rst))
+		dev_dbg(&i2c->dev, "%s: No reset GPIO, no side-effect\n",
+			__func__);
+
+	if (pcm_dev->chip_id == PCM9211 || pcm_dev->chip_id == PCM1690)
+		pcm_dev->sw_rst = pcm9211_sw_rst;
+	else
+		pcm_dev->sw_rst = pcmdevice_sw_rst;
+
+	if (pcm_dev->chip_id == PCM1690)
+		goto skip_interrupt;
+	if (gpio_is_valid(pcm_dev->irq_info.gpio)) {
+		dev_dbg(pcm_dev->dev, "irq-gpio = %d",
+			pcm_dev->irq_info.gpio);
+
+		ret = gpio_request(pcm_dev->irq_info.gpio, "PCMDEV-IRQ");
+		if (!ret) {
+			int gpio = pcm_dev->irq_info.gpio;
+
+			gpio_direction_input(gpio);
+			pcm_dev->irq_info.nmb = gpio_to_irq(gpio);
+
+		} else
+			dev_err(pcm_dev->dev, "%s: GPIO %d request error\n",
+				__func__, pcm_dev->irq_info.gpio);
+	} else
+		dev_err(pcm_dev->dev, "Looking up irq-gpio failed %d\n",
+			pcm_dev->irq_info.gpio);
+
+
+skip_interrupt:
+	mutex_init(&pcm_dev->codec_lock);
+
+	i2c_set_clientdata(i2c, pcm_dev);
+
+	ret = devm_snd_soc_register_component(&i2c->dev,
+		&soc_codec_driver_pcmdevice, pcmdevice_dai_driver,
+		ARRAY_SIZE(pcmdevice_dai_driver));
+	if (ret < 0)
+		dev_err(&i2c->dev, "probe register comp failed %d\n", ret);
+
+out:
+	if (ret < 0)
+		pcmdevice_remove(pcm_dev);
+	return ret;
+}
+
+static void pcmdevice_i2c_remove(struct i2c_client *i2c)
+{
+	struct pcmdevice_priv *pcm_dev = i2c_get_clientdata(i2c);
+
+	pcmdevice_remove(pcm_dev);
+}
+
+static struct i2c_driver pcmdevice_i2c_driver = {
+	.driver = {
+		.name = "pcmdevice-codec",
+		.of_match_table = of_match_ptr(pcmdevice_of_match),
+	},
+	.probe	= pcmdevice_i2c_probe,
+	.remove = pcmdevice_i2c_remove,
+	.id_table = pcmdevice_i2c_id,
+};
+
+module_i2c_driver(pcmdevice_i2c_driver);
+
+MODULE_AUTHOR("Shenghao Ding <shenghao-ding@ti.com>");
+MODULE_DESCRIPTION("ASoC PCM6240 Family Audio ADC/DAC/Router Driver");
+MODULE_LICENSE("GPL");