Message ID | 20240127163247.384439-1-wens@kernel.org (mailing list archive) |
---|---|
Headers | show |
Series | arm64: sun50i-h616: Add DMA and SPDIF controllers | expand |
On Sun, Jan 28, 2024 at 12:32:40AM +0800, Chen-Yu Tsai wrote: > Chen-Yu Tsai (7): > dt-bindings: sound: sun4i-spdif: Fix requirements for H6 > dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible Please submit patches using subject lines reflecting the style for the subsystem, this makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing. There's no need to resubmit to fix this alone.
On Sun, 28 Jan 2024 00:32:40 +0800, Chen-Yu Tsai wrote: > This is v2 of my H616/H618 DMA and SPDIF controller series. > > Changes since v1: > - Switch to "contains" for if-properties statement > - Fall back to A100 instead of H6 > - Add DMA channels for r_i2c > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6 commit: 57b3c130d97e45b8a07586e0ae113e43776c5ea8 [2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible commit: 7a9dc944f129bb56ef855d9c0b0647bc3e98a56f [3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 commit: 0adf963b8463faa44653e22e56ce55f747e68868 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Sun, 28 Jan 2024 00:32:40 +0800, Chen-Yu Tsai wrote: > This is v2 of my H616/H618 DMA and SPDIF controller series. > > Changes since v1: > - Switch to "contains" for if-properties statement > - Fall back to A100 instead of H6 > - Add DMA channels for r_i2c > > [...] Applied, thanks! [4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616 commit: b32eb97edeb8d69092d57419917b19c909ff962a Best regards,
Dne sobota, 27. januar 2024 ob 17:32:40 CET je Chen-Yu Tsai napisal(a): > From: Chen-Yu Tsai <wens@csie.org> > > Hi everyone, > > This is v2 of my H616/H618 DMA and SPDIF controller series. > > Changes since v1: > - Switch to "contains" for if-properties statement > - Fall back to A100 instead of H6 > - Add DMA channels for r_i2c > > This series adds DMA and SPDIF controllers for the H616 and H618. > There's also a fix for SPDIF on H6: the controller also has a > receiver that was not correctly modeled. > > Patch 1 fixes the binding for the SPDIF controller on the H6 by adding > the RX DMA channel. > > Patch 2 adds a compatible string for the H616's SPDIF transmitter to the > binding. > > Patch 3 adds a compatible string for the H616's SPDIF transmitter to the > driver. > > Patch 4 adds a compatible string for the H616's DMA controller. > > Patch 5 adds the RX DMA channel to the SPDIF controller on the H6. > > Patch 6 adds a device node for the H616's DMA controller. > > Patch 7 adds a device node for the H616's SPDIF controller. > > > This was tested on the Orange Pi Zero 3 with SPI flash transfers and > SPDIF audio output. The H6 SPDIF change is superficial as the driver > does not support receiving / capturing an audio stream. > > Please have a look. I expect the first three patches to go through the > ASoC tree, the fourth patch to either go through the DMA tree, or > through the sunxi tree with an Ack, and the last three through the sunxi > tree. > > > Thanks > ChenYu > > > Chen-Yu Tsai (7): > dt-bindings: sound: sun4i-spdif: Fix requirements for H6 > dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible > ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 > dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616 > arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF > arm64: dts: allwinner: h616: Add DMA controller and DMA channels > arm64: dts: allwinner: h616: Add SPDIF device node > > .../dma/allwinner,sun50i-a64-dma.yaml | 12 ++-- > .../sound/allwinner,sun4i-a10-spdif.yaml | 5 +- > .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 + > .../boot/dts/allwinner/sun50i-h6-tanix.dtsi | 2 + > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 7 +-- > .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 61 +++++++++++++++++++ > sound/soc/sunxi/sun4i-spdif.c | 5 ++ > 7 files changed, 85 insertions(+), 9 deletions(-) > > Applied patches 5-7 to sunxi tree, thanks! Best regards, Jernej
From: Chen-Yu Tsai <wens@csie.org> Hi everyone, This is v2 of my H616/H618 DMA and SPDIF controller series. Changes since v1: - Switch to "contains" for if-properties statement - Fall back to A100 instead of H6 - Add DMA channels for r_i2c This series adds DMA and SPDIF controllers for the H616 and H618. There's also a fix for SPDIF on H6: the controller also has a receiver that was not correctly modeled. Patch 1 fixes the binding for the SPDIF controller on the H6 by adding the RX DMA channel. Patch 2 adds a compatible string for the H616's SPDIF transmitter to the binding. Patch 3 adds a compatible string for the H616's SPDIF transmitter to the driver. Patch 4 adds a compatible string for the H616's DMA controller. Patch 5 adds the RX DMA channel to the SPDIF controller on the H6. Patch 6 adds a device node for the H616's DMA controller. Patch 7 adds a device node for the H616's SPDIF controller. This was tested on the Orange Pi Zero 3 with SPI flash transfers and SPDIF audio output. The H6 SPDIF change is superficial as the driver does not support receiving / capturing an audio stream. Please have a look. I expect the first three patches to go through the ASoC tree, the fourth patch to either go through the DMA tree, or through the sunxi tree with an Ack, and the last three through the sunxi tree. Thanks ChenYu Chen-Yu Tsai (7): dt-bindings: sound: sun4i-spdif: Fix requirements for H6 dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616 arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF arm64: dts: allwinner: h616: Add DMA controller and DMA channels arm64: dts: allwinner: h616: Add SPDIF device node .../dma/allwinner,sun50i-a64-dma.yaml | 12 ++-- .../sound/allwinner,sun4i-a10-spdif.yaml | 5 +- .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 + .../boot/dts/allwinner/sun50i-h6-tanix.dtsi | 2 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 7 +-- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 61 +++++++++++++++++++ sound/soc/sunxi/sun4i-spdif.c | 5 ++ 7 files changed, 85 insertions(+), 9 deletions(-)