diff mbox series

[net-next,v11,2/3] arm64: dts: qcom: sa8775p: enable safety IRQ

Message ID 20240130114102.4116046-3-quic_jsuraj@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Ethernet common fault IRQ support | expand

Commit Message

Suraj Jaiswal Jan. 30, 2024, 11:41 a.m. UTC 
Add changes to support safety IRQ handling
support for ethernet.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski Jan. 30, 2024, 11:57 a.m. UTC | #1 
On 30/01/2024 12:41, Suraj Jaiswal wrote:
> Add changes to support safety IRQ handling
> support for ethernet.
> 
> Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---

NAK.

Read the replies you got. This was applied and anyway it is not
next-next material. Please do not send DTS patches to net-next.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index a7eaca33d326..f3645c3f96a1 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2394,8 +2394,9 @@  ethernet1: ethernet@23000000 {
 			      <0x0 0x23016000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
 
 			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
 				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
@@ -2427,8 +2428,9 @@  ethernet0: ethernet@23040000 {
 			      <0x0 0x23056000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
 
 			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
 				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,