new file mode 100644
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+ The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+ subdevices, a PWM chip and a Display Controller.
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9n12-hlcdc
+ - atmel,at91sam9x5-hlcdc
+ - atmel,sama5d2-hlcdc
+ - atmel,sama5d3-hlcdc
+ - atmel,sama5d4-hlcdc
+ - microchip,sam9x60-hlcdc
+ - microchip,sam9x75-xlcdc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: periph_clk
+ - const: sys_clk
+ - const: slow_clk
+ - const: lvds_pll_clk
+ minItems: 3
+
+ display-controller:
+ $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+ pwm:
+ $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ lcd_controller: lcd-controller@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk", "sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
deleted file mode 100644
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
- "atmel,at91sam9n12-hlcdc"
- "atmel,at91sam9x5-hlcdc"
- "atmel,sama5d2-hlcdc"
- "atmel,sama5d3-hlcdc"
- "atmel,sama5d4-hlcdc"
- "microchip,sam9x60-hlcdc"
- "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
- Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
- hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
- reg = <0xf0030000 0x2000>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
- clock-names = "periph_clk","sys_clk", "slow_clk";
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
- };
Convert the atmel,hlcdc binding to DT schema format. Align clocks and clock-names properties to clearly indicate that the LCD controller expects lvds_pll_clk when interfaced with the lvds display. This alignment with the specific hardware requirements ensures accurate device tree configuration for systems utilizing the HLCDC IP. Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> --- Changelog v4 -> v5 - Revert v3 dropping lvds_pll_clk instead add it as an optional clock. - Update minItems to 3. - Update commit message accordingly. v3 -> v4 - Drop lvds_pll_clk, It can be enabled in lvds driver itself. - Update commit message. Note: Since there is no complexities now, I believe that specifying maxitems in the clocks property should be sufficient. v2 -> v3 - Rename hlcdc-display-controller and hlcdc-pwm to generic names. - Modify the description by removing the unwanted comments and '|'. - Modify clock-names simpler. v1 -> v2 - Remove the explicit copyrights. - Modify title (not include words like binding/driver). - Modify description actually describing the hardware and not the driver. - Add details of lvds_pll addition in commit message. - Ref endpoint and not endpoint-base. - Fix coding style. ... .../devicetree/bindings/mfd/atmel,hlcdc.yaml | 99 +++++++++++++++++++ .../devicetree/bindings/mfd/atmel-hlcdc.txt | 56 ----------- 2 files changed, 99 insertions(+), 56 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt