diff mbox series

[net-next,v5,07/15] net: ravb: Move reference clock enable/disable on runtime PM APIs

Message ID 20240131084133.1671440-8-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: ravb: Prepare for suspend to RAM and runtime PM support (part 1) | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1048 this patch: 1048
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 0 of 0 maintainers
netdev/build_clang success Errors and warnings before: 1065 this patch: 1065
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1065 this patch: 1065
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 224 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-01-31--21-00 (tests: 710)

Commit Message

Claudiu Jan. 31, 2024, 8:41 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Reference clock could be or not be part of the power domain. If it is part
of the power domain, the power domain takes care of properly setting it. In
case it is not part of the power domain and full runtime PM support is
available in driver the clock will not be propertly disabled/enabled at
runtime. For this, keep the prepare/unprepare operations in the driver's
probe()/remove() functions and move the enable/disable in runtime PM
functions.

By doing this, the previous ravb_runtime_nop() function was renamed
ravb_runtime_suspend() and the comment was removed. A proper runtime PM
resume function was added (ravb_runtime_resume()). The current driver
still don't need to make any register settings on runtime suspend/resume
(as expressed in the removed comment) because, currently,
pm_runtime_put_sync() is called on the driver remove function. This will be
changed in the next commits (that extends the runtime PM support) such
that proper register settings (along with runtime resume/suspend) will be
done on ravb_open()/ravb_close().

Along with it, the other clock request operations were moved close to
reference clock request and prepare to have all the clock requests
specific code grouped together.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v5:
- fixed typos in patch description
- improved patch description

Changes in v4:
- dropped tag

Changes in v3:
- squashed with patch 17/21 ("net: ravb: Keep clock request operations grouped
  together") from v2
- collected tags

Changes in v2:
- this patch is new and follows the recommendations proposed in the
  discussion of patch 08/13 ("net: ravb: Rely on PM domain to enable refclk")
  from v2
  
 drivers/net/ethernet/renesas/ravb_main.c | 110 ++++++++++++-----------
 1 file changed, 57 insertions(+), 53 deletions(-)

Comments

Sergey Shtylyov Jan. 31, 2024, 6:38 p.m. UTC | #1 
On 1/31/24 11:41 AM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Reference clock could be or not be part of the power domain. If it is part
> of the power domain, the power domain takes care of properly setting it. In
> case it is not part of the power domain and full runtime PM support is
> available in driver the clock will not be propertly disabled/enabled at
> runtime. For this, keep the prepare/unprepare operations in the driver's
> probe()/remove() functions and move the enable/disable in runtime PM
> functions.
> 
> By doing this, the previous ravb_runtime_nop() function was renamed
> ravb_runtime_suspend() and the comment was removed. A proper runtime PM
> resume function was added (ravb_runtime_resume()). The current driver
> still don't need to make any register settings on runtime suspend/resume
> (as expressed in the removed comment) because, currently,
> pm_runtime_put_sync() is called on the driver remove function. This will be
> changed in the next commits (that extends the runtime PM support) such
> that proper register settings (along with runtime resume/suspend) will be
> done on ravb_open()/ravb_close().
> 
> Along with it, the other clock request operations were moved close to
> reference clock request and prepare to have all the clock requests
> specific code grouped together.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

[...]

MBR, Sergey
diff mbox series

Patch

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index c2b65bdad13c..e70c930840ce 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2664,11 +2664,6 @@  static int ravb_probe(struct platform_device *pdev)
 	if (error)
 		goto out_free_netdev;
 
-	pm_runtime_enable(&pdev->dev);
-	error = pm_runtime_resume_and_get(&pdev->dev);
-	if (error < 0)
-		goto out_rpm_disable;
-
 	if (info->multi_irqs) {
 		if (info->err_mgmt_irqs)
 			irq = platform_get_irq_byname(pdev, "dia");
@@ -2679,7 +2674,7 @@  static int ravb_probe(struct platform_device *pdev)
 	}
 	if (irq < 0) {
 		error = irq;
-		goto out_release;
+		goto out_reset_assert;
 	}
 	ndev->irq = irq;
 
@@ -2697,10 +2692,37 @@  static int ravb_probe(struct platform_device *pdev)
 		priv->num_rx_ring[RAVB_NC] = NC_RX_RING_SIZE;
 	}
 
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		error = PTR_ERR(priv->clk);
+		goto out_reset_assert;
+	}
+
+	if (info->gptp_ref_clk) {
+		priv->gptp_clk = devm_clk_get(&pdev->dev, "gptp");
+		if (IS_ERR(priv->gptp_clk)) {
+			error = PTR_ERR(priv->gptp_clk);
+			goto out_reset_assert;
+		}
+	}
+
+	priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
+	if (IS_ERR(priv->refclk)) {
+		error = PTR_ERR(priv->refclk);
+		goto out_reset_assert;
+	}
+	clk_prepare(priv->refclk);
+
+	platform_set_drvdata(pdev, ndev);
+	pm_runtime_enable(&pdev->dev);
+	error = pm_runtime_resume_and_get(&pdev->dev);
+	if (error < 0)
+		goto out_rpm_disable;
+
 	priv->addr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(priv->addr)) {
 		error = PTR_ERR(priv->addr);
-		goto out_release;
+		goto out_rpm_put;
 	}
 
 	/* The Ether-specific entries in the device structure. */
@@ -2711,7 +2733,7 @@  static int ravb_probe(struct platform_device *pdev)
 
 	error = of_get_phy_mode(np, &priv->phy_interface);
 	if (error && error != -ENODEV)
-		goto out_release;
+		goto out_rpm_put;
 
 	priv->no_avb_link = of_property_read_bool(np, "renesas,no-ether-link");
 	priv->avb_link_active_low =
@@ -2724,14 +2746,14 @@  static int ravb_probe(struct platform_device *pdev)
 			irq = platform_get_irq_byname(pdev, "ch24");
 		if (irq < 0) {
 			error = irq;
-			goto out_release;
+			goto out_rpm_put;
 		}
 		priv->emac_irq = irq;
 		for (i = 0; i < NUM_RX_QUEUE; i++) {
 			irq = platform_get_irq_byname(pdev, ravb_rx_irqs[i]);
 			if (irq < 0) {
 				error = irq;
-				goto out_release;
+				goto out_rpm_put;
 			}
 			priv->rx_irqs[i] = irq;
 		}
@@ -2739,7 +2761,7 @@  static int ravb_probe(struct platform_device *pdev)
 			irq = platform_get_irq_byname(pdev, ravb_tx_irqs[i]);
 			if (irq < 0) {
 				error = irq;
-				goto out_release;
+				goto out_rpm_put;
 			}
 			priv->tx_irqs[i] = irq;
 		}
@@ -2748,40 +2770,19 @@  static int ravb_probe(struct platform_device *pdev)
 			irq = platform_get_irq_byname(pdev, "err_a");
 			if (irq < 0) {
 				error = irq;
-				goto out_release;
+				goto out_rpm_put;
 			}
 			priv->erra_irq = irq;
 
 			irq = platform_get_irq_byname(pdev, "mgmt_a");
 			if (irq < 0) {
 				error = irq;
-				goto out_release;
+				goto out_rpm_put;
 			}
 			priv->mgmta_irq = irq;
 		}
 	}
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(priv->clk)) {
-		error = PTR_ERR(priv->clk);
-		goto out_release;
-	}
-
-	priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
-	if (IS_ERR(priv->refclk)) {
-		error = PTR_ERR(priv->refclk);
-		goto out_release;
-	}
-	clk_prepare_enable(priv->refclk);
-
-	if (info->gptp_ref_clk) {
-		priv->gptp_clk = devm_clk_get(&pdev->dev, "gptp");
-		if (IS_ERR(priv->gptp_clk)) {
-			error = PTR_ERR(priv->gptp_clk);
-			goto out_disable_refclk;
-		}
-	}
-
 	ndev->max_mtu = info->rx_max_buf_size - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
 	ndev->min_mtu = ETH_MIN_MTU;
 
@@ -2799,13 +2800,13 @@  static int ravb_probe(struct platform_device *pdev)
 	/* Set AVB config mode */
 	error = ravb_set_config_mode(ndev);
 	if (error)
-		goto out_disable_refclk;
+		goto out_rpm_put;
 
 	if (info->gptp || info->ccc_gac) {
 		/* Set GTI value */
 		error = ravb_set_gti(ndev);
 		if (error)
-			goto out_disable_refclk;
+			goto out_rpm_put;
 
 		/* Request GTI loading */
 		ravb_modify(ndev, GCCR, GCCR_LTI, GCCR_LTI);
@@ -2825,7 +2826,7 @@  static int ravb_probe(struct platform_device *pdev)
 			"Cannot allocate desc base address table (size %d bytes)\n",
 			priv->desc_bat_size);
 		error = -ENOMEM;
-		goto out_disable_refclk;
+		goto out_rpm_put;
 	}
 	for (q = RAVB_BE; q < DBAT_ENTRY_NUM; q++)
 		priv->desc_bat[q].die_dt = DT_EOS;
@@ -2871,8 +2872,6 @@  static int ravb_probe(struct platform_device *pdev)
 	netdev_info(ndev, "Base address at %#x, %pM, IRQ %d.\n",
 		    (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
-	platform_set_drvdata(pdev, ndev);
-
 	return 0;
 
 out_napi_del:
@@ -2888,12 +2887,12 @@  static int ravb_probe(struct platform_device *pdev)
 	/* Stop PTP Clock driver */
 	if (info->ccc_gac)
 		ravb_ptp_stop(ndev);
-out_disable_refclk:
-	clk_disable_unprepare(priv->refclk);
-out_release:
+out_rpm_put:
 	pm_runtime_put(&pdev->dev);
 out_rpm_disable:
 	pm_runtime_disable(&pdev->dev);
+	clk_unprepare(priv->refclk);
+out_reset_assert:
 	reset_control_assert(rstc);
 out_free_netdev:
 	free_netdev(ndev);
@@ -2922,10 +2921,9 @@  static void ravb_remove(struct platform_device *pdev)
 
 	ravb_set_opmode(ndev, CCC_OPC_RESET);
 
-	clk_disable_unprepare(priv->refclk);
-
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+	clk_unprepare(priv->refclk);
 	reset_control_assert(priv->rstc);
 	free_netdev(ndev);
 	platform_set_drvdata(pdev, NULL);
@@ -3060,21 +3058,27 @@  static int ravb_resume(struct device *dev)
 	return ret;
 }
 
-static int ravb_runtime_nop(struct device *dev)
+static int ravb_runtime_suspend(struct device *dev)
 {
-	/* Runtime PM callback shared between ->runtime_suspend()
-	 * and ->runtime_resume(). Simply returns success.
-	 *
-	 * This driver re-initializes all registers after
-	 * pm_runtime_get_sync() anyway so there is no need
-	 * to save and restore registers here.
-	 */
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct ravb_private *priv = netdev_priv(ndev);
+
+	clk_disable(priv->refclk);
+
 	return 0;
 }
 
+static int ravb_runtime_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct ravb_private *priv = netdev_priv(ndev);
+
+	return clk_enable(priv->refclk);
+}
+
 static const struct dev_pm_ops ravb_dev_pm_ops = {
 	SYSTEM_SLEEP_PM_OPS(ravb_suspend, ravb_resume)
-	RUNTIME_PM_OPS(ravb_runtime_nop, ravb_runtime_nop, NULL)
+	RUNTIME_PM_OPS(ravb_runtime_suspend, ravb_runtime_resume, NULL)
 };
 
 static struct platform_driver ravb_driver = {