@@ -689,8 +689,29 @@ usb_qmpphy: phy@1615000 {
clock-output-names = "usb3_phy_pipe_clk_src";
#phy-cells = <0>;
+ orientation-switch;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_dwc3_ss>;
+ };
+ };
+ };
};
system_noc: interconnect@1880000 {
@@ -1373,6 +1394,27 @@ usb_dwc3: usb@4e00000 {
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
dr_mode = "otg";
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+ };
+ };
+ };
};
};
@@ -244,6 +244,46 @@ &pm4125_resin {
status = "okay";
};
+&pm4125_typec {
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "dual";
+ data-role = "dual";
+ self-powered;
+
+ typec-power-opmode = "default";
+ pd-disable;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm4125_hs_in: endpoint {
+ remote-endpoint = <&usb_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm4125_ss_in: endpoint {
+ remote-endpoint = <&usb_qmpphy_out>;
+ };
+ };
+ };
+ };
+};
+
+&pm4125_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <500000>;
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -517,14 +557,8 @@ &usb {
status = "okay";
};
-&usb_qmpphy {
- vdda-phy-supply = <&pm4125_l12>;
- vdda-pll-supply = <&pm4125_l13>;
- status = "okay";
-};
-
-&usb_dwc3 {
- dr_mode = "host";
+&usb_dwc3_hs {
+ remote-endpoint = <&pm4125_hs_in>;
};
&usb_hsphy {
@@ -534,6 +568,16 @@ &usb_hsphy {
status = "okay";
};
+&usb_qmpphy {
+ vdda-phy-supply = <&pm4125_l12>;
+ vdda-pll-supply = <&pm4125_l13>;
+ status = "okay";
+};
+
+&usb_qmpphy_out {
+ remote-endpoint = <&pm4125_ss_in>;
+};
+
&wifi {
vdd-0.8-cx-mx-supply = <&pm4125_l7>;
vdd-1.8-xo-supply = <&pm4125_l13>;
Plug in USB-C related bits and pieces to enable USB role switching and USB-C orientation handling for the Qualcomm RB1 board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/qcm2290.dtsi | 42 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 60 +++++++++++++++++++++++++++----- 2 files changed, 94 insertions(+), 8 deletions(-)