diff mbox series

[net-next,v2,6/7] net: dsa: mt7530: correct port capabilities of MT7988

Message ID 20240130-for-netnext-mt7530-improvements-2-v2-6-ba06f5dd9eb0@arinc9.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series MT7530 DSA Subdriver Improvements Act II | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1048 this patch: 1048
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 0 of 0 maintainers
netdev/build_clang success Errors and warnings before: 1065 this patch: 1065
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1065 this patch: 1065
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 8 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-02-01--18-00 (tests: 717)

Commit Message

Arınç ÜNAL via B4 Relay Jan. 30, 2024, 3:20 p.m. UTC 
From: Arınç ÜNAL <arinc.unal@arinc9.com>

On the switch on the MT7988 SoC, as shown in Block Diagram 8.1.1.3 on page
125 of "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open
Version) v0.1", there are only 4 PHYs. That's port 0 to 3. Set the case for
ports which connect to switch PHYs to '0 ... 3'.

Port 4 and 5 are not used at all in this design.

Link: https://wiki.banana-pi.org/Banana_Pi_BPI-R4#Documents [1]
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/dsa/mt7530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Vladimir Oltean Feb. 2, 2024, 12:05 a.m. UTC | #1 
On Tue, Jan 30, 2024 at 06:20:52PM +0300, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> On the switch on the MT7988 SoC, as shown in Block Diagram 8.1.1.3 on page
> 125 of "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open
> Version) v0.1", there are only 4 PHYs. That's port 0 to 3. Set the case for
> ports which connect to switch PHYs to '0 ... 3'.
> 
> Port 4 and 5 are not used at all in this design.
> 
> Link: https://wiki.banana-pi.org/Banana_Pi_BPI-R4#Documents [1]
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Acked-by: Daniel Golle <daniel@makrotopia.org>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 36dc2bbcf3b6..638cd3f2a495 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2577,7 +2577,7 @@  static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
 
 	switch (port) {
 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
-	case 0 ... 4:
+	case 0 ... 3:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		break;