mbox series

[v3,0/3] Add AM64x ICSSG Ethernet support

Message ID 20240122113045.1711818-1-danishanwar@ti.com (mailing list archive)
Headers show
Series Add AM64x ICSSG Ethernet support | expand

Message

MD Danish Anwar Jan. 22, 2024, 11:30 a.m. UTC 
Hi All,

This series adds support for ICSSG ethernet on AM64x. 
This series is based on the latest next-20231211 linux-next.

AM64x EVM has three ethernet ports. One is dedicated to CPSW and one is
dedicated to ICSSG1. The remaining port is muxed between CPSW and ICSSG1
ICSSG1 ports. The ICSSG1 node is added in the k3-am642-evm.dts. By default
the muxed port is used by CPSW so 2nd ICSSG1 port is disabled in the
k3-am642-evm.dts. But overlay k3-am642-evm-icssg1-dualemac.dtso can be
applied to use muxed port as ICSSG1.

This is the v3 of the series [v1].

Changes from v2 to v3:
*) No functional changes.
*) Rebased on latest linux-next (next-20240122) after 6.8-rc1.

Changes from v1 to v2:
*) Fixed aliases section in k3-am642-evm.dts
*) Fixed firmware-names in k3-am642-evm.dts
*) Changed icssg1_phy1 to ethernet-phy@f from ethernet-phy@0 as suggested
   by Andrew L.
*) Changed makefile to handle overlays using CONFIG_OF_ALL_DTBS as
   suggested by Nishant and Andrew Davis.
*) Fixed aliases section in k3-am642-evm-icssg1-dualemac.dtso
*) Fixed pinctrl in k3-am642-evm-icssg1-dualemac.dtso
*) Updated commit message of patch 3/3 of the series to warn about adding
   label name to 'mdio-mux-1' node.

[v1] https://lore.kernel.org/all/20231207081917.340167-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20231212165832.3933335-1-danishanwar@ti.com/

Thanks and Regards,
MD Danish Anwar

MD Danish Anwar (2):
  arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support
  arm64: dts: ti: k3-am642-evm: add overlay for icssg1 2nd port

Suman Anna (1):
  arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes

 arch/arm64/boot/dts/ti/Makefile               |   5 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |  24 ++++
 .../dts/ti/k3-am642-evm-icssg1-dualemac.dtso  |  75 +++++++++++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 104 +++++++++++++++++-
 4 files changed, 207 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso

base-commit: 319fbd8fc6d339e0a1c7b067eed870c518a13a02

Comments

Ravi Gunasekaran Feb. 2, 2024, 4:46 a.m. UTC | #1 
On 1/22/2024 5:00 PM, MD Danish Anwar wrote:
> Hi All,
>
> This series adds support for ICSSG ethernet on AM64x. 
> This series is based on the latest next-20231211 linux-next.
>
> AM64x EVM has three ethernet ports. One is dedicated to CPSW and one is
> dedicated to ICSSG1. The remaining port is muxed between CPSW and ICSSG1
> ICSSG1 ports. The ICSSG1 node is added in the k3-am642-evm.dts. By default
> the muxed port is used by CPSW so 2nd ICSSG1 port is disabled in the
> k3-am642-evm.dts. But overlay k3-am642-evm-icssg1-dualemac.dtso can be
> applied to use muxed port as ICSSG1.
>
> This is the v3 of the series [v1].
>
> Changes from v2 to v3:
> *) No functional changes.
> *) Rebased on latest linux-next (next-20240122) after 6.8-rc1.
>
> Changes from v1 to v2:
> *) Fixed aliases section in k3-am642-evm.dts
> *) Fixed firmware-names in k3-am642-evm.dts
> *) Changed icssg1_phy1 to ethernet-phy@f from ethernet-phy@0 as suggested
>    by Andrew L.
> *) Changed makefile to handle overlays using CONFIG_OF_ALL_DTBS as
>    suggested by Nishant and Andrew Davis.
> *) Fixed aliases section in k3-am642-evm-icssg1-dualemac.dtso
> *) Fixed pinctrl in k3-am642-evm-icssg1-dualemac.dtso
> *) Updated commit message of patch 3/3 of the series to warn about adding
>    label name to 'mdio-mux-1' node.
>
> [v1] https://lore.kernel.org/all/20231207081917.340167-1-danishanwar@ti.com/
> [v2] https://lore.kernel.org/all/20231212165832.3933335-1-danishanwar@ti.com/
>

For the series,
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>