| Message ID | 20240202-pm4125-typec-v2-3-12771d85700d@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: qrb2210-rb1: enable Type-C support | expand |
On 02/02/2024 00:55, Dmitry Baryshkov wrote: > Define VBUS regulator and the Type-C handling block as present on the > Quacomm PM4125 PMIC. > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > arch/arm64/boot/dts/qcom/pm4125.dtsi | 30 ++++++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm4125.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi > index d886a9e4b091..cf8c822e80ce 100644 > --- a/arch/arm64/boot/dts/qcom/pm4125.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi > @@ -36,6 +36,36 @@ pm4125_resin: resin { > }; > }; > > + pm4125_vbus: usb-vbus-regulator@1100 { > + compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg"; > + reg = <0x1100>; > + status = "disabled"; > + }; > + > + pm4125_typec: typec@1500 { > + compatible = "qcom,pm4125-typec", "qcom,pmi632-typec"; > + reg = <0x1500>; > + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, > + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, > + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, > + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, > + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "or-rid-detect-change", > + "vpd-detect", > + "cc-state-change", > + "vconn-oc", > + "vbus-change", > + "attach-detach", > + "legacy-cable-detect", > + "try-snk-src-detect"; > + vdd-vbus-supply = <&pm4125_vbus>; > + > + status = "disabled"; > + }; > + > rtc@6000 { > compatible = "qcom,pm8941-rtc"; > reg = <0x6000>, <0x6100>; > Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/pm4125.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi index d886a9e4b091..cf8c822e80ce 100644 --- a/arch/arm64/boot/dts/qcom/pm4125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi @@ -36,6 +36,36 @@ pm4125_resin: resin { }; }; + pm4125_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm4125_typec: typec@1500 { + compatible = "qcom,pm4125-typec", "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pm4125_vbus>; + + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>;