| Message ID | 20240212135108.549755-4-avromanov@salutedevices.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support more Amlogic SoC families in crypto driver | expand |
On 12/02/2024 14:50, Alexey Romanov wrote: > Amlogic crypto IP doesn't take a clock input on some > SoCs: AXG / A1 / S4 / G12. So make it optional. > > Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> > --- > drivers/crypto/amlogic/amlogic-gxl-core.c | 21 ++++++++------------- > drivers/crypto/amlogic/amlogic-gxl.h | 2 ++ > 2 files changed, 10 insertions(+), 13 deletions(-) > > diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c > index 4d1b1d5b7a54..54113c524ec5 100644 > --- a/drivers/crypto/amlogic/amlogic-gxl-core.c > +++ b/drivers/crypto/amlogic/amlogic-gxl-core.c > @@ -250,6 +250,7 @@ static void meson_unregister_algs(struct meson_dev *mc) > static const struct meson_pdata meson_gxl_pdata = { > .descs_reg = 0x0, > .status_reg = 0x4, > + .need_clk = true, > }; > > static const struct of_device_id meson_crypto_of_match_table[] = { > @@ -285,17 +286,14 @@ static int meson_crypto_probe(struct platform_device *pdev) > dev_err(&pdev->dev, "Cannot request MMIO err=%d\n", err); > return err; > } > - mc->busclk = devm_clk_get(&pdev->dev, "blkmv"); > - if (IS_ERR(mc->busclk)) { > - err = PTR_ERR(mc->busclk); > - dev_err(&pdev->dev, "Cannot get core clock err=%d\n", err); > - return err; > - } > > - err = clk_prepare_enable(mc->busclk); > - if (err != 0) { > - dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); > - return err; > + if (mc->pdata->need_clk) { > + mc->busclk = devm_clk_get_enabled(&pdev->dev, "blkmv"); > + if (IS_ERR(mc->busclk)) { > + err = PTR_ERR(mc->busclk); > + dev_err(&pdev->dev, "Cannot get and enable core clock err=%d\n", err); > + return err; > + } > } > > err = meson_allocate_chanlist(mc); > @@ -322,7 +320,6 @@ static int meson_crypto_probe(struct platform_device *pdev) > meson_unregister_algs(mc); > error_flow: > meson_free_chanlist(mc, mc->flow_cnt - 1); > - clk_disable_unprepare(mc->busclk); > return err; > } > > @@ -337,8 +334,6 @@ static void meson_crypto_remove(struct platform_device *pdev) > meson_unregister_algs(mc); > > meson_free_chanlist(mc, mc->flow_cnt - 1); > - > - clk_disable_unprepare(mc->busclk); > } > > static struct platform_driver meson_crypto_driver = { > diff --git a/drivers/crypto/amlogic/amlogic-gxl.h b/drivers/crypto/amlogic/amlogic-gxl.h > index 9ad75da214ff..a36b9bac63a0 100644 > --- a/drivers/crypto/amlogic/amlogic-gxl.h > +++ b/drivers/crypto/amlogic/amlogic-gxl.h > @@ -82,10 +82,12 @@ struct meson_flow { > * struct meson_pdata - SoC series dependent data. > * @reg_descs: offset to descriptors register > * @reg_status: offset to status register > + * @need_clk: clock input is needed > */ > struct meson_pdata { > u32 descs_reg; > u32 status_reg; > + bool need_clk; > }; > > /* You may use devm_clk_get_optional_enabled() instead, bindings will ensure clock is provided when needed. With this you can also drop the clk_disable_unprepare() in meson_crypto_remove(). Neil
diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c index 4d1b1d5b7a54..54113c524ec5 100644 --- a/drivers/crypto/amlogic/amlogic-gxl-core.c +++ b/drivers/crypto/amlogic/amlogic-gxl-core.c @@ -250,6 +250,7 @@ static void meson_unregister_algs(struct meson_dev *mc) static const struct meson_pdata meson_gxl_pdata = { .descs_reg = 0x0, .status_reg = 0x4, + .need_clk = true, }; static const struct of_device_id meson_crypto_of_match_table[] = { @@ -285,17 +286,14 @@ static int meson_crypto_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Cannot request MMIO err=%d\n", err); return err; } - mc->busclk = devm_clk_get(&pdev->dev, "blkmv"); - if (IS_ERR(mc->busclk)) { - err = PTR_ERR(mc->busclk); - dev_err(&pdev->dev, "Cannot get core clock err=%d\n", err); - return err; - } - err = clk_prepare_enable(mc->busclk); - if (err != 0) { - dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); - return err; + if (mc->pdata->need_clk) { + mc->busclk = devm_clk_get_enabled(&pdev->dev, "blkmv"); + if (IS_ERR(mc->busclk)) { + err = PTR_ERR(mc->busclk); + dev_err(&pdev->dev, "Cannot get and enable core clock err=%d\n", err); + return err; + } } err = meson_allocate_chanlist(mc); @@ -322,7 +320,6 @@ static int meson_crypto_probe(struct platform_device *pdev) meson_unregister_algs(mc); error_flow: meson_free_chanlist(mc, mc->flow_cnt - 1); - clk_disable_unprepare(mc->busclk); return err; } @@ -337,8 +334,6 @@ static void meson_crypto_remove(struct platform_device *pdev) meson_unregister_algs(mc); meson_free_chanlist(mc, mc->flow_cnt - 1); - - clk_disable_unprepare(mc->busclk); } static struct platform_driver meson_crypto_driver = { diff --git a/drivers/crypto/amlogic/amlogic-gxl.h b/drivers/crypto/amlogic/amlogic-gxl.h index 9ad75da214ff..a36b9bac63a0 100644 --- a/drivers/crypto/amlogic/amlogic-gxl.h +++ b/drivers/crypto/amlogic/amlogic-gxl.h @@ -82,10 +82,12 @@ struct meson_flow { * struct meson_pdata - SoC series dependent data. * @reg_descs: offset to descriptors register * @reg_status: offset to status register + * @need_clk: clock input is needed */ struct meson_pdata { u32 descs_reg; u32 status_reg; + bool need_clk; }; /*
Amlogic crypto IP doesn't take a clock input on some SoCs: AXG / A1 / S4 / G12. So make it optional. Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> --- drivers/crypto/amlogic/amlogic-gxl-core.c | 21 ++++++++------------- drivers/crypto/amlogic/amlogic-gxl.h | 2 ++ 2 files changed, 10 insertions(+), 13 deletions(-)