diff mbox series

ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend

Message ID 20240213115233.15716-1-peter.ujfalusi@linux.intel.com (mailing list archive)
State Accepted
Commit c40aad7c81e5fba34b70123ed7ce3397fa62a4d2
Headers show
Series ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend | expand

Commit Message

Peter Ujfalusi Feb. 13, 2024, 11:52 a.m. UTC 
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.

If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.

If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.

Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.

Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 sound/soc/sof/ipc4-pcm.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

Comments

Mark Brown Feb. 13, 2024, 5:12 p.m. UTC | #1 
On Tue, 13 Feb 2024 13:52:33 +0200, Peter Ujfalusi wrote:
> When the system is suspended while audio is active, the
> sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
> suspend the DSP is turned off, streams will be re-started after resume.
> 
> If the firmware crashes during while audio is running (or when we reset
> the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
> will fail with IPC error and the state change is interrupted.
> This will cause misalignment between the kernel and firmware state on next
> DSP boot resulting errors returned by firmware for IPC messages, eventually
> failing the audio resume.
> On stream close the errors are ignored so the kernel state will be
> corrected on the next DSP boot, so the second boot after the DSP panic.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
      commit: c40aad7c81e5fba34b70123ed7ce3397fa62a4d2

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c
index 85d3f390e4b2..07eb5c6d4adf 100644
--- a/sound/soc/sof/ipc4-pcm.c
+++ b/sound/soc/sof/ipc4-pcm.c
@@ -413,7 +413,18 @@  static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component,
 	ret = sof_ipc4_set_multi_pipeline_state(sdev, state, trigger_list);
 	if (ret < 0) {
 		dev_err(sdev->dev, "failed to set final state %d for all pipelines\n", state);
-		goto free;
+		/*
+		 * workaround: if the firmware is crashed while setting the
+		 * pipelines to reset state we must ignore the error code and
+		 * reset it to 0.
+		 * Since the firmware is crashed we will not send IPC messages
+		 * and we are going to see errors printed, but the state of the
+		 * widgets will be correct for the next boot.
+		 */
+		if (sdev->fw_state != SOF_FW_CRASHED || state != SOF_IPC4_PIPE_RESET)
+			goto free;
+
+		ret = 0;
 	}
 
 	/* update RUNNING/RESET state for all pipelines that were just triggered */