Message ID | 20240212-add-am64-som-v6-2-b59edb2bc8c3@solid-run.com (mailing list archive) |
---|---|
State | Handled Elsewhere |
Headers | show |
Series | arm64: dts: add description for solidrun am642 som and hummingboard evb | expand |
On 12/02/2024 18:38:09+0100, Josua Mayer wrote: > Convert the abracon abx80x rtc text bindings to dt-schema format. > > In addition to the text description reference generic interrupts > properties and add an example. > > Signed-off-by: Josua Mayer <josua@solid-run.com> Did something change since v6? If not, why didn't you collect the reviewed-by tag? > --- > .../devicetree/bindings/rtc/abracon,abx80x.txt | 31 --------- > .../devicetree/bindings/rtc/abracon,abx80x.yaml | 79 ++++++++++++++++++++++ > 2 files changed, 79 insertions(+), 31 deletions(-) > > diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt > deleted file mode 100644 > index 2405e35a1bc0..000000000000 > --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt > +++ /dev/null > @@ -1,31 +0,0 @@ > -Abracon ABX80X I2C ultra low power RTC/Alarm chip > - > -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, > -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 > -is the superset of ab180x. > - > -Required properties: > - > - - "compatible": should one of: > - "abracon,abx80x" > - "abracon,ab0801" > - "abracon,ab0803" > - "abracon,ab0804" > - "abracon,ab0805" > - "abracon,ab1801" > - "abracon,ab1803" > - "abracon,ab1804" > - "abracon,ab1805" > - "microcrystal,rv1805" > - Using "abracon,abx80x" will enable chip autodetection. > - - "reg": I2C bus address of the device > - > -Optional properties: > - > -The abx804 and abx805 have a trickle charger that is able to charge the > -connected battery or supercap. Both the following properties have to be defined > -and valid to enable charging: > - > - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) > - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output > - resistor, the other values are in kOhm. > diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml > new file mode 100644 > index 000000000000..58dbbca27deb > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml > @@ -0,0 +1,79 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip > + > +maintainers: > + - linux-rtc@vger.kernel.org > + > +allOf: > + - $ref: rtc.yaml# > + > +properties: > + compatible: > + description: > + The wildcard 'abracon,abx80x' may be used to support a mix > + of different abracon rtc`s. In this case the driver > + must perform auto-detection from ID register. > + enum: > + - abracon,abx80x > + - abracon,ab0801 > + - abracon,ab0803 > + - abracon,ab0804 > + - abracon,ab0805 > + - abracon,ab1801 > + - abracon,ab1803 > + - abracon,ab1804 > + - abracon,ab1805 > + - microcrystal,rv1805 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + abracon,tc-diode: > + description: > + Trickle-charge diode type. > + Required to enable charging backup battery. > + > + Supported are 'standard' diodes with a 0.6V drop > + and 'schottky' diodes with a 0.3V drop. > + $ref: /schemas/types.yaml#/definitions/string > + enum: > + - standard > + - schottky > + > + abracon,tc-resistor: > + description: > + Trickle-charge resistor value in kOhm. > + Required to enable charging backup battery. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 3, 6, 11] > + > +required: > + - compatible > + - reg > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtc@69 { > + compatible = "abracon,abx80x"; > + reg = <0x69>; > + abracon,tc-diode = "schottky"; > + abracon,tc-resistor = <3>; > + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; > + }; > + }; > > -- > 2.35.3 >
Am 12.02.24 um 21:06 schrieb Alexandre Belloni: > On 12/02/2024 18:38:09+0100, Josua Mayer wrote: >> Convert the abracon abx80x rtc text bindings to dt-schema format. >> >> In addition to the text description reference generic interrupts >> properties and add an example. >> >> Signed-off-by: Josua Mayer <josua@solid-run.com> > Did something change since v6? If not, why didn't you collect the > reviewed-by tag? I forgot about seeing the tag by Krzysztof ... which is why I didn't collect it. Nothing changed since v6, so this still valid: Reviewed-by: Krzysztof Kozlowski<krzysztof.kozlowski@linaro.org> > >> --- >> .../devicetree/bindings/rtc/abracon,abx80x.txt | 31 --------- >> .../devicetree/bindings/rtc/abracon,abx80x.yaml | 79 ++++++++++++++++++++++ >> 2 files changed, 79 insertions(+), 31 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt >> deleted file mode 100644 >> index 2405e35a1bc0..000000000000 >> --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt >> +++ /dev/null >> @@ -1,31 +0,0 @@ >> -Abracon ABX80X I2C ultra low power RTC/Alarm chip >> - >> -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, >> -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 >> -is the superset of ab180x. >> - >> -Required properties: >> - >> - - "compatible": should one of: >> - "abracon,abx80x" >> - "abracon,ab0801" >> - "abracon,ab0803" >> - "abracon,ab0804" >> - "abracon,ab0805" >> - "abracon,ab1801" >> - "abracon,ab1803" >> - "abracon,ab1804" >> - "abracon,ab1805" >> - "microcrystal,rv1805" >> - Using "abracon,abx80x" will enable chip autodetection. >> - - "reg": I2C bus address of the device >> - >> -Optional properties: >> - >> -The abx804 and abx805 have a trickle charger that is able to charge the >> -connected battery or supercap. Both the following properties have to be defined >> -and valid to enable charging: >> - >> - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) >> - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output >> - resistor, the other values are in kOhm. >> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml >> new file mode 100644 >> index 000000000000..58dbbca27deb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml >> @@ -0,0 +1,79 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip >> + >> +maintainers: >> + - linux-rtc@vger.kernel.org >> + >> +allOf: >> + - $ref: rtc.yaml# >> + >> +properties: >> + compatible: >> + description: >> + The wildcard 'abracon,abx80x' may be used to support a mix >> + of different abracon rtc`s. In this case the driver >> + must perform auto-detection from ID register. >> + enum: >> + - abracon,abx80x >> + - abracon,ab0801 >> + - abracon,ab0803 >> + - abracon,ab0804 >> + - abracon,ab0805 >> + - abracon,ab1801 >> + - abracon,ab1803 >> + - abracon,ab1804 >> + - abracon,ab1805 >> + - microcrystal,rv1805 >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + maxItems: 1 >> + >> + abracon,tc-diode: >> + description: >> + Trickle-charge diode type. >> + Required to enable charging backup battery. >> + >> + Supported are 'standard' diodes with a 0.6V drop >> + and 'schottky' diodes with a 0.3V drop. >> + $ref: /schemas/types.yaml#/definitions/string >> + enum: >> + - standard >> + - schottky >> + >> + abracon,tc-resistor: >> + description: >> + Trickle-charge resistor value in kOhm. >> + Required to enable charging backup battery. >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + enum: [0, 3, 6, 11] >> + >> +required: >> + - compatible >> + - reg >> + >> +unevaluatedProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/irq.h> >> + >> + i2c { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + rtc@69 { >> + compatible = "abracon,abx80x"; >> + reg = <0x69>; >> + abracon,tc-diode = "schottky"; >> + abracon,tc-resistor = <3>; >> + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; >> + }; >> + }; >> >> -- >> 2.35.3 >>
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt deleted file mode 100644 index 2405e35a1bc0..000000000000 --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt +++ /dev/null @@ -1,31 +0,0 @@ -Abracon ABX80X I2C ultra low power RTC/Alarm chip - -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 -is the superset of ab180x. - -Required properties: - - - "compatible": should one of: - "abracon,abx80x" - "abracon,ab0801" - "abracon,ab0803" - "abracon,ab0804" - "abracon,ab0805" - "abracon,ab1801" - "abracon,ab1803" - "abracon,ab1804" - "abracon,ab1805" - "microcrystal,rv1805" - Using "abracon,abx80x" will enable chip autodetection. - - "reg": I2C bus address of the device - -Optional properties: - -The abx804 and abx805 have a trickle charger that is able to charge the -connected battery or supercap. Both the following properties have to be defined -and valid to enable charging: - - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output - resistor, the other values are in kOhm. diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml new file mode 100644 index 000000000000..58dbbca27deb --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip + +maintainers: + - linux-rtc@vger.kernel.org + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + description: + The wildcard 'abracon,abx80x' may be used to support a mix + of different abracon rtc`s. In this case the driver + must perform auto-detection from ID register. + enum: + - abracon,abx80x + - abracon,ab0801 + - abracon,ab0803 + - abracon,ab0804 + - abracon,ab0805 + - abracon,ab1801 + - abracon,ab1803 + - abracon,ab1804 + - abracon,ab1805 + - microcrystal,rv1805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + abracon,tc-diode: + description: + Trickle-charge diode type. + Required to enable charging backup battery. + + Supported are 'standard' diodes with a 0.6V drop + and 'schottky' diodes with a 0.3V drop. + $ref: /schemas/types.yaml#/definitions/string + enum: + - standard + - schottky + + abracon,tc-resistor: + description: + Trickle-charge resistor value in kOhm. + Required to enable charging backup battery. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 3, 6, 11] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@69 { + compatible = "abracon,abx80x"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; + };
Convert the abracon abx80x rtc text bindings to dt-schema format. In addition to the text description reference generic interrupts properties and add an example. Signed-off-by: Josua Mayer <josua@solid-run.com> --- .../devicetree/bindings/rtc/abracon,abx80x.txt | 31 --------- .../devicetree/bindings/rtc/abracon,abx80x.yaml | 79 ++++++++++++++++++++++ 2 files changed, 79 insertions(+), 31 deletions(-)