| Message ID | 20240215172617.115307-3-bryant@mai.rs (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add samsung-milletwifi | expand |
On Donnerstag, 15. Februar 2024 18:19:49 CET Bryant Mairs wrote: > Add support for this tablet based on the MSM8226 SoC, codenamed > "milletwifi". > > Signed-off-by: Bryant Mairs <bryant@mai.rs> > Acked-by: Linus Walleij <linus.walleij@linaro.org> afaik Acked-by should come before Signed-off-by (in other words your S-o-b should be the last tag when you send patches) > --- > arch/arm/boot/dts/qcom/Makefile | 1 + > .../qcom/qcom-apq8026-samsung-milletwifi.dts | 568 ++++++++++++++++++ > 2 files changed, 569 insertions(+) > create mode 100644 > arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts > > diff --git a/arch/arm/boot/dts/qcom/Makefile > b/arch/arm/boot/dts/qcom/Makefile index 9cc1e14e6cd0..730d98c2c715 100644 > --- a/arch/arm/boot/dts/qcom/Makefile > +++ b/arch/arm/boot/dts/qcom/Makefile > @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-apq8026-huawei-sturgeon.dtb \ > qcom-apq8026-lg-lenok.dtb \ > qcom-apq8026-samsung-matisse-wifi.dtb \ > + qcom-apq8026-samsung-milletwifi.dtb \ > qcom-apq8060-dragonboard.dtb \ > qcom-apq8064-cm-qs600.dtb \ > qcom-apq8064-ifc6410.dtb \ > diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts > b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts new file mode > 100644 > index 000000000000..a9c38bc8aa01 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts > @@ -0,0 +1,568 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> > + * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/power/summit,smb347-charger.h> > +#include "qcom-msm8226.dtsi" > +#include "pm8226.dtsi" > + > +/delete-node/ &adsp_region; > +/delete-node/ &smem_region; > + > +/ { > + model = "Samsung Galaxy Tab 4 8.0 Wi-Fi"; > + compatible = "samsung,milletwifi", "qcom,apq8026"; > + chassis-type = "tablet"; > + > + aliases { > + display0 = &framebuffer0; > + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ > + mmc1 = &sdhc_2; /* SDC2 SD card slot */ > + }; > + > + chosen { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + stdout-path = "display0"; > + > + framebuffer0: framebuffer@3200000 { > + compatible = "simple-framebuffer"; > + reg = <0x03200000 0x800000>; > + width = <800>; > + height = <1280>; > + stride = <(800 * 3)>; > + format = "r8g8b8"; > + }; > + }; > + > + gpio-hall-sensor { > + compatible = "gpio-keys"; > + > + event-hall-sensor { > + label = "Cover"; > + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; > + linux,input-type = <EV_SW>; > + linux,code = <SW_LID>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + > + key-home { > + label = "Home"; > + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_HOMEPAGE>; > + debounce-interval = <15>; > + }; > + > + key-volume-down { > + label = "Volume Down"; > + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + debounce-interval = <15>; > + }; > + > + key-volume-up { > + label = "Volume Up"; > + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + debounce-interval = <15>; > + }; > + }; > + > + i2c-backlight { > + compatible = "i2c-gpio"; > + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; > + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; > + > + pinctrl-0 = <&backlight_i2c_default_state>; > + pinctrl-names = "default"; > + > + i2c-gpio,delay-us = <4>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + backlight@2c { > + compatible = "ti,lp8556"; > + reg = <0x2c>; > + enable-supply = <®_backlight_vddio>; > + > + dev-ctrl = /bits/ 8 <0x80>; > + init-brt = /bits/ 8 <0x3f>; > + > + /* > + * Change transition duration: 200ms, Change transition strength: heavy, > + * PWM hysteresis: 1-bit w/ 8-bit resolution > + */ > + rom-a3h { > + rom-addr = /bits/ 8 <0xa3>; > + rom-val = /bits/ 8 <0x5e>; > + }; > + > + /* > + * PWM phase configuration: 3-phase/3 drivers (0, 120deg, 240deg, -, -, > -), + * PWM frequency: 9616Hz (10-bit) > + */ > + rom-a5h { > + rom-addr = /bits/ 8 <0xa5>; > + rom-val = /bits/ 8 <0x34>; > + }; > + > + /* Enable LED drivers 2 & 3, Boot inductor current limit: 1.5A/2.6A */ > + rom-a7h { > + rom-addr = /bits/ 8 <0xa7>; > + rom-val = /bits/ 8 <0xfa>; > + }; > + }; > + }; > + > + reg_backlight_vddio: regulator-backlight-vddio { > + compatible = "regulator-fixed"; > + regulator-name = "backlight_vddio"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&backlight_vddio_default_state>; Use this order: pinctrl-0 pinctrl-names Also applies a few more times below. > + }; > + > + reg_tsp_1p8v: regulator-tsp-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "tsp_1p8v"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tsp_en1_default_state>; > + }; > + > + reg_tsp_3p3v: regulator-tsp-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "tsp_3p3v"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tsp_en_default_state>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + framebuffer@3200000 { > + reg = <0x03200000 0x800000>; > + no-map; > + }; > + > + mpss_region: mpss@8400000 { > + reg = <0x08400000 0x1f00000>; > + no-map; > + }; > + > + mba_region: mba@a300000 { > + reg = <0x0a300000 0x100000>; > + no-map; > + }; > + > + reserved@cb00000 { > + reg = <0x0cb00000 0x700000>; > + no-map; > + }; > + > + wcnss_region: wcnss@d200000 { > + reg = <0x0d200000 0x700000>; > + no-map; > + }; > + > + adsp_region: adsp@d900000 { > + reg = <0x0d900000 0x1800000>; > + no-map; > + }; > + > + venus@f100000 { > + reg = <0x0f100000 0x500000>; > + no-map; > + }; > + > + smem_region: smem@fa00000 { > + reg = <0x0fa00000 0x100000>; > + no-map; > + }; > + > + reserved@fb00000 { > + reg = <0x0fb00000 0x260000>; > + no-map; > + }; > + > + rfsa@fd60000 { > + reg = <0x0fd60000 0x20000>; > + no-map; > + }; > + > + rmtfs@fd80000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0fd80000 0x180000>; > + no-map; > + > + qcom,client-id = <1>; > + }; > + }; > +}; > + > +&blsp1_i2c2 { > + status = "okay"; > + > + accelerometer@1d { > + compatible = "st,lis2hh12"; > + reg = <0x1d>; > + > + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; > + > + pinctrl-0 = <&accel_int_default_state>; > + pinctrl-names = "default"; > + > + st,drdy-int-pin = <1>; This should move lower in this node if I read the style guide correctly :) "Vendor-specific properties" https://www.kernel.org/doc/html/next/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node Rest looks fine, so with that fixed you can add my: Reviewed-by: Luca Weiss <luca@z3ntu.xyz> > + > + vdd-supply = <&pm8226_l19>; > + vddio-supply = <&pm8226_lvs1>; > + > + mount-matrix = "0", "1", "0", > + "-1", "0", "0", > + "0", "0", "1"; > + }; > +}; > + > +&blsp1_i2c3 { > + status = "okay"; > + > + charger@6a { > + compatible = "summit,smb358"; > + reg = <0x6a>; > + > + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; > + > + pinctrl-0 = <&charger_int_default_state>; > + pinctrl-names = "default"; > + > + summit,enable-usb-charging; > + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; > + summit,fast-voltage-threshold-microvolt = <3000000>; > + summit,chip-temperature-threshold-celsius = <130>; > + summit,usb-current-limit-microamp = <1500000>; > + }; > +}; > + > +&blsp1_i2c4 { > + status = "okay"; > + > + muic: usb-switch@25 { > + compatible = "siliconmitus,sm5502-muic"; > + reg = <0x25>; > + > + interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>; > + > + pinctrl-0 = <&muic_int_default_state>; > + pinctrl-names = "default"; > + }; > +}; > + > +&blsp1_i2c5 { > + status = "okay"; > + > + touchscreen@48 { > + compatible = "melfas,mms252", "melfas,mms114"; > + reg = <0x48>; > + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; > + touchscreen-size-x = <800>; > + touchscreen-size-y = <1280>; > + avdd-supply = <®_tsp_3p3v>; > + vdd-supply = <®_tsp_1p8v>; > + linux,keycodes = <KEY_APPSELECT KEY_BACK>; > + > + pinctrl-0 = <&tsp_int_rst_default_state>; > + pinctrl-names = "default"; > + }; > +}; > + > +&rpm_requests { > + regulators { > + compatible = "qcom,rpm-pm8226-regulators"; > + > + pm8226_s3: s3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + }; > + > + pm8226_s4: s4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8226_s5: s5 { > + regulator-min-microvolt = <1150000>; > + regulator-max-microvolt = <1150000>; > + }; > + > + pm8226_l1: l1 { > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1225000>; > + }; > + > + pm8226_l2: l2 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + pm8226_l3: l3 { > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1337500>; > + regulator-always-on; > + }; > + > + pm8226_l4: l4 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + pm8226_l5: l5 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + pm8226_l6: l6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + pm8226_l7: l7 { > + regulator-min-microvolt = <1850000>; > + regulator-max-microvolt = <1850000>; > + }; > + > + pm8226_l8: l8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + pm8226_l9: l9 { > + regulator-min-microvolt = <2050000>; > + regulator-max-microvolt = <2050000>; > + }; > + > + pm8226_l10: l10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8226_l12: l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8226_l14: l14 { > + regulator-min-microvolt = <2750000>; > + regulator-max-microvolt = <2750000>; > + }; > + > + pm8226_l15: l15 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + pm8226_l16: l16 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3350000>; > + }; > + > + pm8226_l17: l17 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + > + regulator-system-load = <200000>; > + regulator-allow-set-load; > + regulator-always-on; > + }; > + > + pm8226_l18: l18 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8226_l19: l19 { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + pm8226_l20: l20 { > + regulator-min-microvolt = <3075000>; > + regulator-max-microvolt = <3075000>; > + }; > + > + pm8226_l21: l21 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8226_l22: l22 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + pm8226_l23: l23 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + pm8226_l24: l24 { > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1350000>; > + }; > + > + pm8226_l25: l25 { > + regulator-min-microvolt = <1775000>; > + regulator-max-microvolt = <2125000>; > + }; > + > + pm8226_l26: l26 { > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1300000>; > + }; > + > + pm8226_l27: l27 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8226_l28: l28 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8226_lvs1: lvs1 {}; > + }; > +}; > + > +&sdhc_1 { > + vmmc-supply = <&pm8226_l17>; > + vqmmc-supply = <&pm8226_l6>; > + > + bus-width = <8>; > + non-removable; > + > + status = "okay"; > +}; > + > +&sdhc_2 { > + vmmc-supply = <&pm8226_l18>; > + vqmmc-supply = <&pm8226_l21>; > + > + bus-width = <4>; > + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; > + > + pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&tlmm { > + accel_int_default_state: accel-int-default-state { > + pins = "gpio54"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + backlight_i2c_default_state: backlight-i2c-default-state { > + pins = "gpio20", "gpio21"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + backlight_vddio_default_state: backlight-vddio-default-state { > + pins = "gpio74"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + charger_int_default_state: charger-int-default-state { > + pins = "gpio115"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + muic_int_default_state: muic-int-default-state { > + pins = "gpio67"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + sdc2_cd_default_state: sdc2-cd-default-state { > + pins = "gpio38"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + tsp_en_default_state: tsp-en-default-state { > + pins = "gpio31"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + tsp_en1_default_state: tsp-en1-default-state { > + pins = "gpio114"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + tsp_int_rst_default_state: tsp-int-rst-default-state { > + pins = "gpio17"; > + function = "gpio"; > + drive-strength = <10>; > + bias-pull-up; > + }; > +}; > + > +&usb { > + extcon = <&muic>, <&muic>; > + status = "okay"; > +}; > + > +&usb_hs_phy { > + extcon = <&muic>; > + v1p8-supply = <&pm8226_l10>; > + v3p3-supply = <&pm8226_l20>; > +};
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 9cc1e14e6cd0..730d98c2c715 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8026-samsung-matisse-wifi.dtb \ + qcom-apq8026-samsung-milletwifi.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts new file mode 100644 index 000000000000..a9c38bc8aa01 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/power/summit,smb347-charger.h> +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Tab 4 8.0 Wi-Fi"; + compatible = "samsung,milletwifi", "qcom,apq8026"; + chassis-type = "tablet"; + + aliases { + display0 = &framebuffer0; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <800>; + height = <1280>; + stride = <(800 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Cover"; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-backlight { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&backlight_i2c_default_state>; + pinctrl-names = "default"; + + i2c-gpio,delay-us = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + enable-supply = <®_backlight_vddio>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x3f>; + + /* + * Change transition duration: 200ms, Change transition strength: heavy, + * PWM hysteresis: 1-bit w/ 8-bit resolution + */ + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + + /* + * PWM phase configuration: 3-phase/3 drivers (0, 120deg, 240deg, -, -, -), + * PWM frequency: 9616Hz (10-bit) + */ + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x34>; + }; + + /* Enable LED drivers 2 & 3, Boot inductor current limit: 1.5A/2.6A */ + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xfa>; + }; + }; + }; + + reg_backlight_vddio: regulator-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "backlight_vddio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_vddio_default_state>; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default_state>; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default_state>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss_region: mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba_region: mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp_region: adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-0 = <&accel_int_default_state>; + pinctrl-names = "default"; + + st,drdy-int-pin = <1>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + charger@6a { + compatible = "summit,smb358"; + reg = <0x6a>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&charger_int_default_state>; + pinctrl-names = "default"; + + summit,enable-usb-charging; + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; + summit,fast-voltage-threshold-microvolt = <3000000>; + summit,chip-temperature-threshold-celsius = <130>; + summit,usb-current-limit-microamp = <1500000>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&muic_int_default_state>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "melfas,mms252", "melfas,mms114"; + reg = <0x48>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + avdd-supply = <®_tsp_3p3v>; + vdd-supply = <®_tsp_1p8v>; + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-0 = <&tsp_int_rst_default_state>; + pinctrl-names = "default"; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_i2c_default_state: backlight-i2c-default-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_vddio_default_state: backlight-vddio-default-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + charger_int_default_state: charger-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default_state: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +};