| Message ID | 20240215220101.248023-1-jmaxwell37@gmail.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,v4] intel: make module parameters readable in sys filesystem | expand |
> -----Original Message----- > From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of Jon Maxwell > Sent: Friday, February 16, 2024 3:31 AM > To: Brandeburg, Jesse <jesse.brandeburg@intel.com> > Cc: intel-wired-lan@lists.osuosl.org; linux-kernel@vger.kernel.org; edumazet@google.com; Nguyen, Anthony L <anthony.l.nguyen@intel.com>; netdev@vger.kernel.org; kuba@kernel.org; pabeni@redhat.com; jmaxwell37@gmail.com; davem@davemloft.net > Subject: [Intel-wired-lan] [net-next v4] intel: make module parameters readable in sys filesystem > > Linux users sometimes need an easy way to check current values of module > parameters. For example the module may be manually reloaded with different > parameters. Make these visible and readable in the /sys filesystem to allow > that. But don't make the "debug" module parameter visible as debugging is > enabled via ethtool msglvl. > > Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> > --- > V2: Remove the "debug" module parameter as per Andrew Lunns suggestion. > V3: Correctly format v2. > V4: Add ethtool msglvl to message. Remove deprecated ixgbe max_vfs > drivers/net/ethernet/intel/e100.c | 4 ++-- > drivers/net/ethernet/intel/igb/igb_main.c | 2 +- > drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- > 3 files changed, 4 insertions(+), 4 deletions(-) > Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 01f0f12035caeb7ca1657387538fcebf5c608322..3fcb8daaa2437fa3fe7b98ba9f606dbbb1844e58 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -171,8 +171,8 @@ static int debug = 3; static int eeprom_bad_csum_allow = 0; static int use_io = 0; module_param(debug, int, 0); -module_param(eeprom_bad_csum_allow, int, 0); -module_param(use_io, int, 0); +module_param(eeprom_bad_csum_allow, int, 0444); +module_param(use_io, int, 0444); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums"); MODULE_PARM_DESC(use_io, "Force use of i/o access mode"); diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 4df8d4153aa5f5ce7ac9dd566180d552be9f5b4f..31d0a43a908c0a4eab4fe1147064a5f5677c9f0b 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -202,7 +202,7 @@ static struct notifier_block dca_notifier = { #endif #ifdef CONFIG_PCI_IOV static unsigned int max_vfs; -module_param(max_vfs, uint, 0); +module_param(max_vfs, uint, 0444); MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate per physical function"); #endif /* CONFIG_PCI_IOV */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index bd541527c8c74d6922e8683e2f4493d9b361f67b..7d09d89bb4c01d1d7b600724b6575892212b5e29 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -153,7 +153,7 @@ MODULE_PARM_DESC(max_vfs, #endif /* CONFIG_PCI_IOV */ static bool allow_unsupported_sfp; -module_param(allow_unsupported_sfp, bool, 0); +module_param(allow_unsupported_sfp, bool, 0444); MODULE_PARM_DESC(allow_unsupported_sfp, "Allow unsupported and untested SFP+ modules on 82599-based adapters");
Linux users sometimes need an easy way to check current values of module parameters. For example the module may be manually reloaded with different parameters. Make these visible and readable in the /sys filesystem to allow that. But don't make the "debug" module parameter visible as debugging is enabled via ethtool msglvl. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> --- V2: Remove the "debug" module parameter as per Andrew Lunns suggestion. V3: Correctly format v2. V4: Add ethtool msglvl to message. Remove deprecated ixgbe max_vfs drivers/net/ethernet/intel/e100.c | 4 ++-- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)