@@ -14,8 +14,36 @@
#include "hw/arm/bcm2838.h"
#include "trace.h"
+#define GIC400_MAINTENANCE_IRQ 9
+#define GIC400_TIMER_NS_EL2_IRQ 10
+#define GIC400_TIMER_VIRT_IRQ 11
+#define GIC400_LEGACY_FIQ 12
+#define GIC400_TIMER_S_EL1_IRQ 13
+#define GIC400_TIMER_NS_EL1_IRQ 14
+#define GIC400_LEGACY_IRQ 15
+
+/* Number of external interrupt lines to configure the GIC with */
+#define GIC_NUM_IRQS 192
+
+#define PPI(cpu, irq) (GIC_NUM_IRQS + (cpu) * GIC_INTERNAL + GIC_NR_SGIS + irq)
+
+#define GIC_BASE_OFS 0x0000
+#define GIC_DIST_OFS 0x1000
+#define GIC_CPU_OFS 0x2000
+#define GIC_VIFACE_THIS_OFS 0x4000
+#define GIC_VIFACE_OTHER_OFS(cpu) (0x5000 + (cpu) * 0x200)
+#define GIC_VCPU_OFS 0x6000
+
#define VIRTUAL_PMU_IRQ 7
+static void bcm2838_gic_set_irq(void *opaque, int irq, int level)
+{
+ BCM2838State *s = (BCM2838State *)opaque;
+
+ trace_bcm2838_gic_set_irq(irq, level);
+ qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level);
+}
+
static void bcm2838_init(Object *obj)
{
BCM2838State *s = BCM2838(obj);
@@ -28,11 +56,12 @@ static void bcm2838_init(Object *obj)
"vcram-size");
object_property_add_alias(obj, "command-line", OBJECT(&s->peripherals),
"command-line");
+
+ object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC);
}
static void bcm2838_realize(DeviceState *dev, Error **errp)
{
- int n;
BCM2838State *s = BCM2838(dev);
BCM283XBaseState *s_base = BCM283X_BASE(dev);
BCM283XBaseClass *bc_base = BCM283X_BASE_GET_CLASS(dev);
@@ -40,6 +69,8 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
BCMSocPeripheralBaseState *ps_base =
BCM_SOC_PERIPHERALS_BASE(&s->peripherals);
+ DeviceState *gicdev = NULL;
+
if (!bcm283x_common_realize(dev, ps_base, errp)) {
return;
}
@@ -52,11 +83,15 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
sysbus_mmio_map(SYS_BUS_DEVICE(&s_base->control), 0, bc_base->ctrl_base);
/* Create cores */
- for (n = 0; n < bc_base->core_count; n++) {
+ for (int n = 0; n < bc_base->core_count; n++) {
object_property_set_int(OBJECT(&s_base->cpu[n].core), "mp-affinity",
(bc_base->clusterid << 8) | n, &error_abort);
+ /* set periphbase/CBAR value for CPU-local registers */
+ object_property_set_int(OBJECT(&s_base->cpu[n].core), "reset-cbar",
+ bc_base->peri_base, &error_abort);
+
/* start powered off if not enabled */
object_property_set_bool(OBJECT(&s_base->cpu[n].core),
"start-powered-off",
@@ -66,6 +101,134 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
return;
}
}
+
+ if (!object_property_set_uint(OBJECT(&s->gic), "revision", 2, errp)) {
+ return;
+ }
+
+ if (!object_property_set_uint(OBJECT(&s->gic), "num-cpu", BCM283X_NCPUS,
+ errp)) {
+ return;
+ }
+
+ if (!object_property_set_uint(OBJECT(&s->gic), "num-irq",
+ GIC_NUM_IRQS + GIC_INTERNAL, errp)) {
+ return;
+ }
+
+ if (!object_property_set_bool(OBJECT(&s->gic),
+ "has-virtualization-extensions", true,
+ errp)) {
+ return;
+ }
+
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) {
+ return;
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_DIST_OFS);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_CPU_OFS);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 2,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_VIFACE_THIS_OFS);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 3,
+ bc_base->ctrl_base + BCM2838_GIC_BASE + GIC_VCPU_OFS);
+
+ for (int n = 0; n < BCM283X_NCPUS; n++) {
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 4 + n,
+ bc_base->ctrl_base + BCM2838_GIC_BASE
+ + GIC_VIFACE_OTHER_OFS(n));
+ }
+
+ gicdev = DEVICE(&s->gic);
+
+ for (int n = 0; n < BCM283X_NCPUS; n++) {
+ DeviceState *cpudev = DEVICE(&s_base->cpu[n]);
+
+ /* Connect the GICv2 outputs to the CPU */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n,
+ qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + BCM283X_NCPUS,
+ qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 2 * BCM283X_NCPUS,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 3 * BCM283X_NCPUS,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), n + 4 * BCM283X_NCPUS,
+ qdev_get_gpio_in(gicdev,
+ PPI(n, GIC400_MAINTENANCE_IRQ)));
+
+ /* Connect timers from the CPU to the interrupt controller */
+ qdev_connect_gpio_out(cpudev, GTIMER_PHYS,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_NS_EL1_IRQ)));
+ qdev_connect_gpio_out(cpudev, GTIMER_VIRT,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_VIRT_IRQ)));
+ qdev_connect_gpio_out(cpudev, GTIMER_HYP,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_NS_EL2_IRQ)));
+ qdev_connect_gpio_out(cpudev, GTIMER_SEC,
+ qdev_get_gpio_in(gicdev, PPI(n, GIC400_TIMER_S_EL1_IRQ)));
+ /* PMU interrupt */
+ qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+ qdev_get_gpio_in(gicdev, PPI(n, VIRTUAL_PMU_IRQ)));
+ }
+
+ /* Connect UART0 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->uart0), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_UART0));
+
+ /* Connect AUX / UART1 to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->aux), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_AUX_UART1));
+
+ /* Connect VC mailbox to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->mboxes), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_MBOX));
+
+ /* Connect SD host to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->sdhost), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_SDHOST));
+
+ /* According to DTS, EMMC and EMMC2 share one irq */
+ DeviceState *mmc_irq_orgate = DEVICE(&ps->mmc_irq_orgate);
+
+ /* Connect EMMC and EMMC2 to the interrupt controller */
+ qdev_connect_gpio_out(mmc_irq_orgate, 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_EMMC_EMMC2));
+
+ /* Connect USB OTG and MPHI to the interrupt controller */
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->mphi), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_MPHI));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dwc2), 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DWC2));
+
+ /* Connect DMA 0-6 to the interrupt controller */
+ for (int n = GIC_SPI_INTERRUPT_DMA_0; n <= GIC_SPI_INTERRUPT_DMA_6; n++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dma),
+ n - GIC_SPI_INTERRUPT_DMA_0,
+ qdev_get_gpio_in(gicdev, n));
+ }
+
+ /* According to DTS, DMA 7 and 8 share one irq */
+ DeviceState *dma_7_8_irq_orgate = DEVICE(&ps->dma_7_8_irq_orgate);
+
+ /* Connect DMA 7-8 to the interrupt controller */
+ qdev_connect_gpio_out(dma_7_8_irq_orgate, 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_7_8));
+
+ /* According to DTS, DMA 9 and 10 share one irq */
+ DeviceState *dma_9_10_irq_orgate = DEVICE(&ps->dma_9_10_irq_orgate);
+
+ /* Connect DMA 9-10 to the interrupt controller */
+ qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
+ qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DMA_9_10));
+
+ /* Pass through inbound GPIO lines to the GIC */
+ qdev_init_gpio_in(dev, bcm2838_gic_set_irq, GIC_NUM_IRQS);
+
+ /* Pass through outbound IRQ lines from the GIC */
+ qdev_pass_gpios(DEVICE(&s->gic), DEVICE(&s->peripherals), NULL);
}
static void bcm2838_class_init(ObjectClass *oc, void *data)
@@ -70,3 +70,6 @@ z2_aer915_event(int8_t event, int8_t len) "i2c event =0x%x len=%d bytes"
xen_create_virtio_mmio_devices(int i, int irq, uint64_t base) "Created virtio-mmio device %d: irq %d base 0x%"PRIx64
xen_init_ram(uint64_t machine_ram_size) "Initialized xen ram with size 0x%"PRIx64
xen_enable_tpm(uint64_t addr) "Connected tpmdev at address 0x%"PRIx64
+
+# bcm2838.c
+bcm2838_gic_set_irq(int irq, int level) "gic irq:%d lvl:%d"
@@ -10,6 +10,7 @@
#define BCM2838_H
#include "hw/arm/bcm2836.h"
+#include "hw/intc/arm_gic.h"
#include "hw/arm/bcm2838_peripherals.h"
#define BCM2838_PERI_LOW_BASE 0xfc000000
@@ -24,6 +25,7 @@ struct BCM2838State {
BCM283XBaseState parent_obj;
/*< public >*/
BCM2838PeripheralState peripherals;
+ GICState gic;
};
#endif /* BCM2838_H */
@@ -11,6 +11,39 @@
#include "hw/arm/bcm2835_peripherals.h"
+/* SPI */
+#define GIC_SPI_INTERRUPT_MBOX 33
+#define GIC_SPI_INTERRUPT_MPHI 40
+#define GIC_SPI_INTERRUPT_DWC2 73
+#define GIC_SPI_INTERRUPT_DMA_0 80
+#define GIC_SPI_INTERRUPT_DMA_6 86
+#define GIC_SPI_INTERRUPT_DMA_7_8 87
+#define GIC_SPI_INTERRUPT_DMA_9_10 88
+#define GIC_SPI_INTERRUPT_AUX_UART1 93
+#define GIC_SPI_INTERRUPT_SDHOST 120
+#define GIC_SPI_INTERRUPT_UART0 121
+#define GIC_SPI_INTERRUPT_RNG200 125
+#define GIC_SPI_INTERRUPT_EMMC_EMMC2 126
+#define GIC_SPI_INTERRUPT_PCI_INT_A 143
+#define GIC_SPI_INTERRUPT_GENET_A 157
+#define GIC_SPI_INTERRUPT_GENET_B 158
+
+
+/* GPU (legacy) DMA interrupts */
+#define GPU_INTERRUPT_DMA0 16
+#define GPU_INTERRUPT_DMA1 17
+#define GPU_INTERRUPT_DMA2 18
+#define GPU_INTERRUPT_DMA3 19
+#define GPU_INTERRUPT_DMA4 20
+#define GPU_INTERRUPT_DMA5 21
+#define GPU_INTERRUPT_DMA6 22
+#define GPU_INTERRUPT_DMA7_8 23
+#define GPU_INTERRUPT_DMA9_10 24
+#define GPU_INTERRUPT_DMA11 25
+#define GPU_INTERRUPT_DMA12 26
+#define GPU_INTERRUPT_DMA13 27
+#define GPU_INTERRUPT_DMA14 28
+#define GPU_INTERRUPT_DMA15 31
#define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
@@ -24,6 +57,10 @@ struct BCM2838PeripheralState {
MemoryRegion peri_low_mr;
MemoryRegion peri_low_mr_alias;
MemoryRegion mphi_mr_alias;
+
+ OrIRQState mmc_irq_orgate;
+ OrIRQState dma_7_8_irq_orgate;
+ OrIRQState dma_9_10_irq_orgate;
};
struct BCM2838PeripheralClass {
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> --- hw/arm/bcm2838.c | 167 ++++++++++++++++++++++++++- hw/arm/trace-events | 3 + include/hw/arm/bcm2838.h | 2 + include/hw/arm/bcm2838_peripherals.h | 37 ++++++ 4 files changed, 207 insertions(+), 2 deletions(-)