| Message ID | 20240226234532.80114-6-aford173@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soc: imx8mp: Finish support for HDMI | expand |
Hi Adam, thanks a lot for pushing this topic. On 24-02-26, Adam Ford wrote: > From: Lucas Stach <l.stach@pengutronix.de> > > This adds the DT nodes for all the peripherals that make up the > HDMI display pipeline. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Signed-off-by: Adam Ford <aford173@gmail.com> > Tested-by: Marek Vasut <marex@denx.de> > Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > --- > V6: Make LCDIF3 disabled by default > > V5: No change > > V3: Re-ordered the HDMI parts to properly come after irqstree_hdmi > inside AIPS4. Change size of LCDIF3 and PVI to match TRM sizes > of 4KB. > > V2: I took this from Lucas' original submission with the following: > Removed extra clock from HDMI-TX since it is now part of the > power domain > Added interrupt-parent to PVI > Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx > Added ports to HDMI-tx > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 95 +++++++++++++++++++++++ > 1 file changed, 95 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index 18bfa7d9aa7f..637b0265b0f1 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1940,6 +1940,101 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { > clock-names = "ipg"; > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; > }; > + > + hdmi_pvi: display-bridge@32fc4000 { > + compatible = "fsl,imx8mp-hdmi-pvi"; > + reg = <0x32fc4000 0x1000>; > + interrupt-parent = <&irqsteer_hdmi>; > + interrupts = <12>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; this node should be 'status = "disabled";' as reported by Luca else this node will EPROBE_DEFER. With that beeing fixed you can add my: Tested-by: Marco Felsch <m.felsch@pengutronix.de> Regards, Marco > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pvi_from_lcdif3: endpoint { > + remote-endpoint = <&lcdif3_to_pvi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + pvi_to_hdmi_tx: endpoint { > + remote-endpoint = <&hdmi_tx_from_pvi>; > + }; > + }; > + }; > + }; > + > + lcdif3: display-controller@32fc6000 { > + compatible = "fsl,imx8mp-lcdif"; > + reg = <0x32fc6000 0x1000>; > + interrupt-parent = <&irqsteer_hdmi>; > + interrupts = <8>; > + clocks = <&hdmi_tx_phy>, > + <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_ROOT>; > + clock-names = "pix", "axi", "disp_axi"; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; > + status = "disabled"; > + > + port { > + lcdif3_to_pvi: endpoint { > + remote-endpoint = <&pvi_from_lcdif3>; > + }; > + }; > + }; > + > + hdmi_tx: hdmi@32fd8000 { > + compatible = "fsl,imx8mp-hdmi-tx"; > + reg = <0x32fd8000 0x7eff>; > + interrupt-parent = <&irqsteer_hdmi>; > + interrupts = <0>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_REF_266M>, > + <&clk IMX8MP_CLK_32K>, > + <&hdmi_tx_phy>; > + clock-names = "iahb", "isfr", "cec", "pix"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; > + reg-io-width = <1>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + hdmi_tx_from_pvi: endpoint { > + remote-endpoint = <&pvi_to_hdmi_tx>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + /* Point endpoint to the HDMI connector */ > + }; > + }; > + }; > + > + hdmi_tx_phy: phy@32fdff00 { > + compatible = "fsl,imx8mp-hdmi-phy"; > + reg = <0x32fdff00 0x100>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_24M>; > + clock-names = "apb", "ref"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; > + #clock-cells = <0>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > }; > > pcie: pcie@33800000 { > -- > 2.43.0 > > >
On Tue, Feb 27, 2024 at 2:33 AM Marco Felsch <m.felsch@pengutronix.de> wrote: > > Hi Adam, > > thanks a lot for pushing this topic. > > On 24-02-26, Adam Ford wrote: > > From: Lucas Stach <l.stach@pengutronix.de> > > > > This adds the DT nodes for all the peripherals that make up the > > HDMI display pipeline. > > > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > > Signed-off-by: Adam Ford <aford173@gmail.com> > > Tested-by: Marek Vasut <marex@denx.de> > > Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > --- > > V6: Make LCDIF3 disabled by default > > > > V5: No change > > > > V3: Re-ordered the HDMI parts to properly come after irqstree_hdmi > > inside AIPS4. Change size of LCDIF3 and PVI to match TRM sizes > > of 4KB. > > > > V2: I took this from Lucas' original submission with the following: > > Removed extra clock from HDMI-TX since it is now part of the > > power domain > > Added interrupt-parent to PVI > > Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx > > Added ports to HDMI-tx > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 95 +++++++++++++++++++++++ > > 1 file changed, 95 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > index 18bfa7d9aa7f..637b0265b0f1 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -1940,6 +1940,101 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { > > clock-names = "ipg"; > > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; > > }; > > + > > + hdmi_pvi: display-bridge@32fc4000 { > > + compatible = "fsl,imx8mp-hdmi-pvi"; > > + reg = <0x32fc4000 0x1000>; > > + interrupt-parent = <&irqsteer_hdmi>; > > + interrupts = <12>; > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; > > this node should be 'status = "disabled";' as reported by Luca else this > node will EPROBE_DEFER. With that beeing fixed you can add my: sorry I missed that one...and I though I was done...sigh. I hope it's not too late to get this into the next release. > > Tested-by: Marco Felsch <m.felsch@pengutronix.de> > I'll push a V7 tonight and add your tested-by. Thanks for testing. adam > Regards, > Marco > > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + pvi_from_lcdif3: endpoint { > > + remote-endpoint = <&lcdif3_to_pvi>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + pvi_to_hdmi_tx: endpoint { > > + remote-endpoint = <&hdmi_tx_from_pvi>; > > + }; > > + }; > > + }; > > + }; > > + > > + lcdif3: display-controller@32fc6000 { > > + compatible = "fsl,imx8mp-lcdif"; > > + reg = <0x32fc6000 0x1000>; > > + interrupt-parent = <&irqsteer_hdmi>; > > + interrupts = <8>; > > + clocks = <&hdmi_tx_phy>, > > + <&clk IMX8MP_CLK_HDMI_APB>, > > + <&clk IMX8MP_CLK_HDMI_ROOT>; > > + clock-names = "pix", "axi", "disp_axi"; > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; > > + status = "disabled"; > > + > > + port { > > + lcdif3_to_pvi: endpoint { > > + remote-endpoint = <&pvi_from_lcdif3>; > > + }; > > + }; > > + }; > > + > > + hdmi_tx: hdmi@32fd8000 { > > + compatible = "fsl,imx8mp-hdmi-tx"; > > + reg = <0x32fd8000 0x7eff>; > > + interrupt-parent = <&irqsteer_hdmi>; > > + interrupts = <0>; > > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > > + <&clk IMX8MP_CLK_HDMI_REF_266M>, > > + <&clk IMX8MP_CLK_32K>, > > + <&hdmi_tx_phy>; > > + clock-names = "iahb", "isfr", "cec", "pix"; > > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; > > + reg-io-width = <1>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + hdmi_tx_from_pvi: endpoint { > > + remote-endpoint = <&pvi_to_hdmi_tx>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + /* Point endpoint to the HDMI connector */ > > + }; > > + }; > > + }; > > + > > + hdmi_tx_phy: phy@32fdff00 { > > + compatible = "fsl,imx8mp-hdmi-phy"; > > + reg = <0x32fdff00 0x100>; > > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > > + <&clk IMX8MP_CLK_HDMI_24M>; > > + clock-names = "apb", "ref"; > > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; > > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; > > + #clock-cells = <0>; > > + #phy-cells = <0>; > > + status = "disabled"; > > + }; > > }; > > > > pcie: pcie@33800000 { > > -- > > 2.43.0 > > > > > >
On Tue, 27 Feb 2024 07:51:58 -0600 Adam Ford <aford173@gmail.com> wrote: > On Tue, Feb 27, 2024 at 2:33 AM Marco Felsch <m.felsch@pengutronix.de> wrote: > > > > Hi Adam, > > > > thanks a lot for pushing this topic. > > > > On 24-02-26, Adam Ford wrote: > > > From: Lucas Stach <l.stach@pengutronix.de> > > > > > > This adds the DT nodes for all the peripherals that make up the > > > HDMI display pipeline. > > > > > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > Tested-by: Marek Vasut <marex@denx.de> > > > Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > > --- > > > V6: Make LCDIF3 disabled by default > > > > > > V5: No change > > > > > > V3: Re-ordered the HDMI parts to properly come after irqstree_hdmi > > > inside AIPS4. Change size of LCDIF3 and PVI to match TRM sizes > > > of 4KB. > > > > > > V2: I took this from Lucas' original submission with the following: > > > Removed extra clock from HDMI-TX since it is now part of the > > > power domain > > > Added interrupt-parent to PVI > > > Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx > > > Added ports to HDMI-tx > > > --- > > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 95 +++++++++++++++++++++++ > > > 1 file changed, 95 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > index 18bfa7d9aa7f..637b0265b0f1 100644 > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > @@ -1940,6 +1940,101 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { > > > clock-names = "ipg"; > > > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; > > > }; > > > + > > > + hdmi_pvi: display-bridge@32fc4000 { > > > + compatible = "fsl,imx8mp-hdmi-pvi"; > > > + reg = <0x32fc4000 0x1000>; > > > + interrupt-parent = <&irqsteer_hdmi>; > > > + interrupts = <12>; > > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; > > > > this node should be 'status = "disabled";' as reported by Luca else this > > node will EPROBE_DEFER. With that beeing fixed you can add my: > > sorry I missed that one...and I though I was done...sigh. I hope it's > not too late to get this into the next release. > > > > Tested-by: Marco Felsch <m.felsch@pengutronix.de> > > > > I'll push a V7 tonight and add your tested-by. Thanks for testing. And with that fixed you can add to v7: Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Luca
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 18bfa7d9aa7f..637b0265b0f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1940,6 +1940,101 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { clock-names = "ipg"; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; }; + + hdmi_pvi: display-bridge@32fc4000 { + compatible = "fsl,imx8mp-hdmi-pvi"; + reg = <0x32fc4000 0x1000>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <12>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pvi_from_lcdif3: endpoint { + remote-endpoint = <&lcdif3_to_pvi>; + }; + }; + + port@1 { + reg = <1>; + pvi_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pvi>; + }; + }; + }; + }; + + lcdif3: display-controller@32fc6000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32fc6000 0x1000>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <8>; + clocks = <&hdmi_tx_phy>, + <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif3_to_pvi: endpoint { + remote-endpoint = <&pvi_from_lcdif3>; + }; + }; + }; + + hdmi_tx: hdmi@32fd8000 { + compatible = "fsl,imx8mp-hdmi-tx"; + reg = <0x32fd8000 0x7eff>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <0>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_32K>, + <&hdmi_tx_phy>; + clock-names = "iahb", "isfr", "cec", "pix"; + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; + reg-io-width = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_tx_from_pvi: endpoint { + remote-endpoint = <&pvi_to_hdmi_tx>; + }; + }; + + port@1 { + reg = <1>; + /* Point endpoint to the HDMI connector */ + }; + }; + }; + + hdmi_tx_phy: phy@32fdff00 { + compatible = "fsl,imx8mp-hdmi-phy"; + reg = <0x32fdff00 0x100>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "ref"; + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; }; pcie: pcie@33800000 {