diff mbox series

clk: rk3399: Allow to set rate of clk_i2s0_frac's parent

Message ID 20240217193439.1762213-1-megi@xff.cz (mailing list archive)
State New, archived
Headers show
Series clk: rk3399: Allow to set rate of clk_i2s0_frac's parent | expand

Commit Message

Ondřej Jirman Feb. 17, 2024, 7:34 p.m. UTC 
From: Ondrej Jirman <megi@xff.cz>

Otherwise when when clk_i2s0 muxes to clk_i2s0_div which requires
setting high divider value on clk_i2s0_div, and then muxes back to
clk_i2s0_frac, clk_i2s0_frac would have no way to change the
clk_i2s0_div's divider ratio back to 1 so that it can satisfy the
condition for m/n > 20 for fractional division to work correctly.

Bug is reproducible by playing 44.1k audio, then 48k audio, and then
44.1k audio again. This results in clk_i2s0_div being set to 49 and
clk_i2s0_frac not being able to cope with such a low input clock rate
and audio playing extremely slowly.

The identical issue is on i2s1 and i2s2 clocks, too.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
 drivers/clk/rockchip/clk-rk3399.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Heiko Stuebner Feb. 27, 2024, 11:13 p.m. UTC | #1 
On Sat, 17 Feb 2024 20:34:38 +0100, Ondřej Jirman wrote:
> From: Ondrej Jirman <megi@xff.cz>
> 
> Otherwise when when clk_i2s0 muxes to clk_i2s0_div which requires
> setting high divider value on clk_i2s0_div, and then muxes back to
> clk_i2s0_frac, clk_i2s0_frac would have no way to change the
> clk_i2s0_div's divider ratio back to 1 so that it can satisfy the
> condition for m/n > 20 for fractional division to work correctly.
> 
> [...]

Applied, thanks!

[1/1] clk: rk3399: Allow to set rate of clk_i2s0_frac's parent
      commit: 1361d75503fccc0e6b3ecbcd5bb53bbdfdc52f0a

Best regards,
diff mbox series

Patch

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 5efac2ca3048..a17996acd065 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -597,7 +597,7 @@  static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s0_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(28), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 3, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(96), 0,
 			RK3399_CLKGATE_CON(8), 4, GFLAGS,
 			&rk3399_i2s0_fracmux),
@@ -607,7 +607,7 @@  static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s1_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(29), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 6, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(97), 0,
 			RK3399_CLKGATE_CON(8), 7, GFLAGS,
 			&rk3399_i2s1_fracmux),
@@ -617,7 +617,7 @@  static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s2_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(30), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 9, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(98), 0,
 			RK3399_CLKGATE_CON(8), 10, GFLAGS,
 			&rk3399_i2s2_fracmux),