| Message ID | 20240222233343.71856-1-mathias.nyman@linux.intel.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 69c63350e573367f9c8594162288cffa8a26d0d1 |
| Headers | show |
| Series | [v2] usb: port: Don't try to peer unused USB ports based on location | expand |
Dear Mathias, Thank you for version 2. Am 23.02.24 um 00:33 schrieb Mathias Nyman: > Unused USB ports may have bogus location data in ACPI PLD tables. > This causes port peering failures as these unused USB2 and USB3 ports > location may match. > > Due to these failures the driver prints a > "usb: port power management may be unreliable" warning, and > unnecessarily blocks port power off during runtime suspend. > > This was debugged on a couple DELL systems where the unused ports > all returned zeroes in their location data. > Similar bugreports exist for other systems. > > Don't try to peer or match ports that have connect type set to > USB_PORT_NOT_USED. > > Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 > Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> > Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de > Cc: stable@vger.kernel.org # v3.16+ > Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> > --- > v1 -> v2 > - Improve commit message > - Add missing Fixes, Closes and Link tags > - send this patch separately for easier picking to usb-linus > > drivers/usb/core/port.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c > index c628c1abc907..4d63496f98b6 100644 > --- a/drivers/usb/core/port.c > +++ b/drivers/usb/core/port.c > @@ -573,7 +573,7 @@ static int match_location(struct usb_device *peer_hdev, void *p) > struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); > struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent); > > - if (!peer_hub) > + if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED) > return 0; > > hcd = bus_to_hcd(hdev->bus); > @@ -584,7 +584,8 @@ static int match_location(struct usb_device *peer_hdev, void *p) > > for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { > peer = peer_hub->ports[port1 - 1]; > - if (peer && peer->location == port_dev->location) { > + if (peer && peer->connect_type != USB_PORT_NOT_USED && > + peer->location == port_dev->location) { > link_peers_report(port_dev, peer); > return 1; /* done */ > } I tested the two versions from before 8c849968dd165 usb: port: Don't try to peer unused USB ports based on location 85704eb36e9f2 usb: usb-acpi: Set port connect type of not connectable ports correctly 39133352cbed6 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm on the Dell OptiPlex 5055 [1], but the USB keyboard and mouse were not detected. I have to find out, if I screwed up the build – as network also did not work –, but please wait until I get that test finished. On the bright side, the warning was gone. ;-) With 6.8-rc5 and the two patches: [ 2.020312] usbcore: registered new interface driver usbfs [ 2.021303] usbcore: registered new interface driver hub [ 2.022307] usbcore: registered new device driver usb [ 3.219725] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.285546] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.301819] usbcore: registered new interface driver usb-storage [ 3.630824] usb 1-7: new low-speed USB device number 2 using xhci_hcd [ 4.120826] usb 1-10: new low-speed USB device number 3 using xhci_hcd With 6.6.12 and without your patches: [ 2.746693] usbcore: registered new interface driver usbfs [ 2.751684] usbcore: registered new interface driver hub [ 2.756686] usbcore: registered new device driver usb [ 4.095689] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.116406] usb: port power management may be unreliable [ 4.182389] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.203353] usbcore: registered new interface driver usb-storage [ 4.417466] usb 1-7: new low-speed USB device number 2 using xhci_hcd [ 4.918470] usb 1-10: new low-speed USB device number 3 using xhci_hcd [ 13.184956] usbcore: registered new interface driver usbhid [ 13.191508] usbhid: USB HID core driver [ 13.333554] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.0/0003:413C:2107.0001/input/input8 [ 13.421779] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:01:00.0-7/input0 [ 13.446542] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.0/0003:046D:C050.0002/input/input11 [ 13.473113] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-10/input0 [1]: https://bugzilla.kernel.org/show_bug.cgi?id=218487
Dear Mathias, Am 24.02.24 um 12:27 schrieb Paul Menzel: > Thank you for version 2. > > Am 23.02.24 um 00:33 schrieb Mathias Nyman: >> Unused USB ports may have bogus location data in ACPI PLD tables. >> This causes port peering failures as these unused USB2 and USB3 ports >> location may match. >> >> Due to these failures the driver prints a >> "usb: port power management may be unreliable" warning, and >> unnecessarily blocks port power off during runtime suspend. >> >> This was debugged on a couple DELL systems where the unused ports >> all returned zeroes in their location data. >> Similar bugreports exist for other systems. >> >> Don't try to peer or match ports that have connect type set to >> USB_PORT_NOT_USED. >> >> Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") >> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 >> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 >> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> >> Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de >> Cc: stable@vger.kernel.org # v3.16+ >> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> >> --- >> v1 -> v2 >> - Improve commit message >> - Add missing Fixes, Closes and Link tags >> - send this patch separately for easier picking to usb-linus >> >> drivers/usb/core/port.c | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c >> index c628c1abc907..4d63496f98b6 100644 >> --- a/drivers/usb/core/port.c >> +++ b/drivers/usb/core/port.c >> @@ -573,7 +573,7 @@ static int match_location(struct usb_device >> *peer_hdev, void *p) >> struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); >> struct usb_device *hdev = >> to_usb_device(port_dev->dev.parent->parent); >> - if (!peer_hub) >> + if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED) >> return 0; >> hcd = bus_to_hcd(hdev->bus); >> @@ -584,7 +584,8 @@ static int match_location(struct usb_device >> *peer_hdev, void *p) >> for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { >> peer = peer_hub->ports[port1 - 1]; >> - if (peer && peer->location == port_dev->location) { >> + if (peer && peer->connect_type != USB_PORT_NOT_USED && >> + peer->location == port_dev->location) { >> link_peers_report(port_dev, peer); >> return 1; /* done */ >> } > > I tested the two versions from before > > 8c849968dd165 usb: port: Don't try to peer unused USB ports based > on location > 85704eb36e9f2 usb: usb-acpi: Set port connect type of not > connectable ports correctly > 39133352cbed6 Merge tag 'for-linus' of > git://git.kernel.org/pub/scm/virt/kvm/kvm > > on the Dell OptiPlex 5055 [1], but the USB keyboard and mouse were not > detected. I have to find out, if I screwed up the build – as network > also did not work –, but please wait until I get that test finished. On > the bright side, the warning was gone. ;-) […] Sorry, wrong alarm. I guess I messed the module installation, and the modules were not found. I successfully tested it on a different Dell OptiPlex 5055 and uploaded the messages to the Linux Kernel Bugzilla issue [1]. Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Sorry for the noise. Kind regards, Paul > [1]: https://bugzilla.kernel.org/show_bug.cgi?id=218487
Dear Mathias, Am 23.02.24 um 00:33 schrieb Mathias Nyman: > Unused USB ports may have bogus location data in ACPI PLD tables. > This causes port peering failures as these unused USB2 and USB3 ports > location may match. > > Due to these failures the driver prints a > "usb: port power management may be unreliable" warning, and > unnecessarily blocks port power off during runtime suspend. > > This was debugged on a couple DELL systems where the unused ports > all returned zeroes in their location data. > Similar bugreports exist for other systems. > > Don't try to peer or match ports that have connect type set to > USB_PORT_NOT_USED. > > Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 > Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> > Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de > Cc: stable@vger.kernel.org # v3.16+ > Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> […] I was able to successfully test it on the Dell PowerEdge T440, and the warning is gone there too. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218490 Kind regards, Paul
Dear Mathias, One more successful test. Am 23.02.24 um 00:33 schrieb Mathias Nyman: > Unused USB ports may have bogus location data in ACPI PLD tables. > This causes port peering failures as these unused USB2 and USB3 ports > location may match. > > Due to these failures the driver prints a > "usb: port power management may be unreliable" warning, and > unnecessarily blocks port power off during runtime suspend. > > This was debugged on a couple DELL systems where the unused ports > all returned zeroes in their location data. > Similar bugreports exist for other systems. > > Don't try to peer or match ports that have connect type set to > USB_PORT_NOT_USED. > > Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 > Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> > Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de > Cc: stable@vger.kernel.org # v3.16+ > Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> […] Tested-on: Dell XPS 15 7590 (system firmware 1.25.0) Kind regards, Paul [ 0.000000] Linux version 6.8.0-rc6+ (pmenzel@villette) (gcc (Debian 13.2.0-16.1) 13.2.0, GNU ld (GNU Binutils for Debian) 2.42) #12 SMP PREEMPT_DYNAMIC Tue Feb 27 17:44:20 CET 2024 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.8.0-rc6+ root=UUID=9fa41e21-7a5f-479e-afdc-9a5503368d8e ro cryptomgr.notests quiet rd.luks=1 rd.auto=1 log_buf_len=4M usbcore.dyndbg=+p [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000005c4b3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005c4b4000-0x000000005c4b4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005c4b5000-0x000000005c4b5fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005c4b6000-0x000000006bff8fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006bff9000-0x000000006d770fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006d771000-0x000000006d7edfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006d7ee000-0x000000006e162fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006e163000-0x000000006fffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x0000000078dfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078e00000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087c7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x55fda018-0x55fe8657] usable ==> usable [ 0.000000] e820: update [mem 0x55fda018-0x55fe8657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000055fda017] usable [ 0.000000] reserve setup_data: [mem 0x0000000055fda018-0x0000000055fe8657] usable [ 0.000000] reserve setup_data: [mem 0x0000000055fe8658-0x000000005c4b3fff] usable [ 0.000000] reserve setup_data: [mem 0x000000005c4b4000-0x000000005c4b4fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000005c4b5000-0x000000005c4b5fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000005c4b6000-0x000000006bff8fff] usable [ 0.000000] reserve setup_data: [mem 0x000000006bff9000-0x000000006d770fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006d771000-0x000000006d7edfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000006d7ee000-0x000000006e162fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000006e163000-0x000000006fffefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x0000000078dfffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000078e00000-0x000000007f7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087c7fffff] usable [ 0.000000] efi: EFI v2.7 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x6d78a000 ACPI=0x6d78a000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6e0a1000 ESRT=0x6fa4b798 MEMATTR=0x695be018 INITRD=0x5c5ded98 RNG=0x6d789018 TPMEventLog=0x55fe9018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem55: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map [ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved [ 0.000000] efi: Not removing mem56: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem58: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem59: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: Dell Inc. XPS 15 7590/0VYV0G, BIOS 1.25.0 11/06/2023 [ 0.000000] tsc: Detected 2600.000 MHz processor [ 0.000000] tsc: Detected 2599.992 MHz TSC [ 0.000848] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000850] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000859] last_pfn = 0x87c800 max_arch_pfn = 0x400000000 [ 0.000862] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs [ 0.000864] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001231] last_pfn = 0x78e00 max_arch_pfn = 0x400000000 [ 0.007544] esrt: Reserving ESRT space from 0x000000006fa4b798 to 0x000000006fa4b7d0. [ 0.007551] Using GB pages for direct mapping [ 0.010076] printk: log_buf_len: 4194304 bytes [ 0.010077] printk: early log buf free: 125000(95%) [ 0.010078] Secure boot disabled [ 0.010079] RAMDISK: [mem 0x55ff2000-0x57da1fff] [ 0.010083] ACPI: Early table checksum verification disabled [ 0.010085] ACPI: RSDP 0x000000006D78A000 000024 (v02 DELL ) [ 0.010089] ACPI: XSDT 0x000000006D78A0C8 000114 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.010094] ACPI: FACP 0x000000006D7CB0A0 000114 (v06 DELL CBX3 01072009 AMI 00010013) [ 0.010099] ACPI: DSDT 0x000000006D78A270 040E2F (v02 DELL CBX3 01072009 INTL 20160527) [ 0.010102] ACPI: FACS 0x000000006E161C00 000040 [ 0.010104] ACPI: APIC 0x000000006D7CB1B8 0000F4 (v04 DELL CBX3 01072009 AMI 00010013) [ 0.010106] ACPI: FPDT 0x000000006D7CB2B0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.010109] ACPI: FIDT 0x000000006D7CB2F8 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.010111] ACPI: MCFG 0x000000006D7CB398 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.010114] ACPI: SSDT 0x000000006D7CB3D8 001B26 (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.010117] ACPI: BOOT 0x000000006D7CCF00 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.010119] ACPI: SSDT 0x000000006D7CCF28 001663 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.010122] ACPI: SSDT 0x000000006D7CE590 002644 (v02 PegSsd PegSsdt 00001000 INTL 20160527) [ 0.010124] ACPI: HPET 0x000000006D7D0BD8 000038 (v01 DELL\x CBX3 00000002 01000013) [ 0.010127] ACPI: SSDT 0x000000006D7D0C10 001441 (v02 DELL\x CflH_Tbt 00001000 INTL 20160527) [ 0.010129] ACPI: UEFI 0x000000006D7D2058 000042 (v01 DELL\x CBX3 00000002 01000013) [ 0.010132] ACPI: LPIT 0x000000006D7D20A0 000094 (v01 DELL\x CBX3 00000002 01000013) [ 0.010134] ACPI: WSMT 0x000000006D7D2138 000028 (v01 DELL CBX3 00000002 01000013) [ 0.010137] ACPI: SSDT 0x000000006D7D2160 0027DE (v02 DELL\x PtidDevc 00001000 INTL 20160527) [ 0.010141] ACPI: SSDT 0x000000006D7D4940 00037A (v02 DELL\x TbtTypeC 00000000 INTL 20160527) [ 0.010143] ACPI: DBGP 0x000000006D7D4CC0 000034 (v01 DELL\x CBX3 00000002 01000013) [ 0.010146] ACPI: DBG2 0x000000006D7D4CF8 000054 (v00 DELL\x CBX3 00000002 01000013) [ 0.010148] ACPI: SSDT 0x000000006D7D4D50 0007DC (v02 DELL\x UsbCTabl 00001000 INTL 20160527) [ 0.010151] ACPI: SSDT 0x000000006D7D5530 00BE4B (v02 DptfTa DptfTabl 00001000 INTL 20160527) [ 0.010153] ACPI: MSDM 0x000000006D7E1380 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.010156] ACPI: SLIC 0x000000006D7E13D8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.010158] ACPI: DMAR 0x000000006D7E1550 0000C8 (v01 INTEL EDK2 00000002 01000013) [ 0.010161] ACPI: SSDT 0x000000006D7E1618 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.010164] ACPI: SSDT 0x000000006D7E1760 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527) [ 0.010166] ACPI: NHLT 0x000000006D7E1810 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.010169] ACPI: BGRT 0x000000006D7E1840 000038 (v00 DELL CBX3 01072009 AMI 00010013) [ 0.010171] ACPI: TPM2 0x000000006D7E1878 000034 (v04 DELL\x CBX3 00000001 AMI 00000000) [ 0.010174] ACPI: ASF! 0x000000006D7E18B0 0000A0 (v32 DELL\x CBX3 00000002 01000013) [ 0.010176] ACPI: SSDT 0x000000006D7E1950 001E51 (v01 OptRef OptTabl 00001000 INTL 20160527) [ 0.010178] ACPI: Reserving FACP table memory at [mem 0x6d7cb0a0-0x6d7cb1b3] [ 0.010180] ACPI: Reserving DSDT table memory at [mem 0x6d78a270-0x6d7cb09e] [ 0.010180] ACPI: Reserving FACS table memory at [mem 0x6e161c00-0x6e161c3f] [ 0.010181] ACPI: Reserving APIC table memory at [mem 0x6d7cb1b8-0x6d7cb2ab] [ 0.010182] ACPI: Reserving FPDT table memory at [mem 0x6d7cb2b0-0x6d7cb2f3] [ 0.010182] ACPI: Reserving FIDT table memory at [mem 0x6d7cb2f8-0x6d7cb393] [ 0.010183] ACPI: Reserving MCFG table memory at [mem 0x6d7cb398-0x6d7cb3d3] [ 0.010184] ACPI: Reserving SSDT table memory at [mem 0x6d7cb3d8-0x6d7ccefd] [ 0.010184] ACPI: Reserving BOOT table memory at [mem 0x6d7ccf00-0x6d7ccf27] [ 0.010185] ACPI: Reserving SSDT table memory at [mem 0x6d7ccf28-0x6d7ce58a] [ 0.010186] ACPI: Reserving SSDT table memory at [mem 0x6d7ce590-0x6d7d0bd3] [ 0.010186] ACPI: Reserving HPET table memory at [mem 0x6d7d0bd8-0x6d7d0c0f] [ 0.010187] ACPI: Reserving SSDT table memory at [mem 0x6d7d0c10-0x6d7d2050] [ 0.010188] ACPI: Reserving UEFI table memory at [mem 0x6d7d2058-0x6d7d2099] [ 0.010188] ACPI: Reserving LPIT table memory at [mem 0x6d7d20a0-0x6d7d2133] [ 0.010189] ACPI: Reserving WSMT table memory at [mem 0x6d7d2138-0x6d7d215f] [ 0.010190] ACPI: Reserving SSDT table memory at [mem 0x6d7d2160-0x6d7d493d] [ 0.010190] ACPI: Reserving SSDT table memory at [mem 0x6d7d4940-0x6d7d4cb9] [ 0.010191] ACPI: Reserving DBGP table memory at [mem 0x6d7d4cc0-0x6d7d4cf3] [ 0.010192] ACPI: Reserving DBG2 table memory at [mem 0x6d7d4cf8-0x6d7d4d4b] [ 0.010192] ACPI: Reserving SSDT table memory at [mem 0x6d7d4d50-0x6d7d552b] [ 0.010193] ACPI: Reserving SSDT table memory at [mem 0x6d7d5530-0x6d7e137a] [ 0.010194] ACPI: Reserving MSDM table memory at [mem 0x6d7e1380-0x6d7e13d4] [ 0.010194] ACPI: Reserving SLIC table memory at [mem 0x6d7e13d8-0x6d7e154d] [ 0.010195] ACPI: Reserving DMAR table memory at [mem 0x6d7e1550-0x6d7e1617] [ 0.010196] ACPI: Reserving SSDT table memory at [mem 0x6d7e1618-0x6d7e175b] [ 0.010196] ACPI: Reserving SSDT table memory at [mem 0x6d7e1760-0x6d7e180d] [ 0.010197] ACPI: Reserving NHLT table memory at [mem 0x6d7e1810-0x6d7e183c] [ 0.010198] ACPI: Reserving BGRT table memory at [mem 0x6d7e1840-0x6d7e1877] [ 0.010198] ACPI: Reserving TPM2 table memory at [mem 0x6d7e1878-0x6d7e18ab] [ 0.010199] ACPI: Reserving ASF! table memory at [mem 0x6d7e18b0-0x6d7e194f] [ 0.010200] ACPI: Reserving SSDT table memory at [mem 0x6d7e1950-0x6d7e37a0] [ 0.010471] No NUMA configuration found [ 0.010472] Faking a node at [mem 0x0000000000000000-0x000000087c7fffff] [ 0.010479] NODE_DATA(0) allocated [mem 0x87b5d5000-0x87b5fffff] [ 0.010638] Zone ranges: [ 0.010638] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010640] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010641] Normal [mem 0x0000000100000000-0x000000087c7fffff] [ 0.010642] Device empty [ 0.010643] Movable zone start for each node [ 0.010645] Early memory node ranges [ 0.010646] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.010647] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.010648] node 0: [mem 0x0000000000100000-0x000000003fffffff] [ 0.010648] node 0: [mem 0x0000000040400000-0x000000005c4b3fff] [ 0.010649] node 0: [mem 0x000000005c4b6000-0x000000006bff8fff] [ 0.010650] node 0: [mem 0x000000006ffff000-0x000000006fffffff] [ 0.010651] node 0: [mem 0x0000000078000000-0x0000000078dfffff] [ 0.010651] node 0: [mem 0x0000000100000000-0x000000087c7fffff] [ 0.010654] Initmem setup node 0 [mem 0x0000000000001000-0x000000087c7fffff] [ 0.010658] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010659] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010677] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.012382] On node 0, zone DMA32: 1024 pages in unavailable ranges [ 0.012675] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.012802] On node 0, zone DMA32: 16390 pages in unavailable ranges [ 0.013542] On node 0, zone Normal: 29184 pages in unavailable ranges [ 0.013654] On node 0, zone Normal: 14336 pages in unavailable ranges [ 0.013678] Reserving Intel graphics memory at [mem 0x7b800000-0x7f7fffff] [ 0.014678] ACPI: PM-Timer IO Port: 0x1808 [ 0.014684] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.014686] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.014687] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.014687] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.014688] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.014689] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.014689] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.014690] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.014691] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.014691] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.014692] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.014692] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.014738] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.014740] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.014742] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.014746] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.014746] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.014753] e820: update [mem 0x66e9d000-0x66f05fff] usable ==> reserved [ 0.014764] TSC deadline timer available [ 0.014765] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.014786] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.014788] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.014789] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.014791] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff] [ 0.014792] PM: hibernation: Registered nosave memory: [mem 0x55fda000-0x55fdafff] [ 0.014794] PM: hibernation: Registered nosave memory: [mem 0x55fe8000-0x55fe8fff] [ 0.014795] PM: hibernation: Registered nosave memory: [mem 0x5c4b4000-0x5c4b4fff] [ 0.014796] PM: hibernation: Registered nosave memory: [mem 0x5c4b5000-0x5c4b5fff] [ 0.014798] PM: hibernation: Registered nosave memory: [mem 0x66e9d000-0x66f05fff] [ 0.014799] PM: hibernation: Registered nosave memory: [mem 0x6bff9000-0x6d770fff] [ 0.014800] PM: hibernation: Registered nosave memory: [mem 0x6d771000-0x6d7edfff] [ 0.014800] PM: hibernation: Registered nosave memory: [mem 0x6d7ee000-0x6e162fff] [ 0.014801] PM: hibernation: Registered nosave memory: [mem 0x6e163000-0x6fffefff] [ 0.014803] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff] [ 0.014804] PM: hibernation: Registered nosave memory: [mem 0x78e00000-0x7f7fffff] [ 0.014805] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0xfdffffff] [ 0.014805] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.014806] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.014806] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.014807] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.014808] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.014808] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.014809] [mem 0x7f800000-0xfdffffff] available for PCI devices [ 0.014811] Booting paravirtualized kernel on bare hardware [ 0.014812] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.018972] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.019492] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.019498] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.019500] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.019525] Kernel command line: BOOT_IMAGE=/vmlinuz-6.8.0-rc6+ root=UUID=9fa41e21-7a5f-479e-afdc-9a5503368d8e ro cryptomgr.notests quiet rd.luks=1 rd.auto=1 log_buf_len=4M usbcore.dyndbg=+p [ 0.019602] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.8.0-rc6+", will be passed to user space. [ 0.021960] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.023130] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.023300] Fallback order for Node 0: 0 [ 0.023303] Built 1 zonelists, mobility grouping on. Total pages: 8165040 [ 0.023304] Policy zone: Normal [ 0.023315] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.023316] stackdepot: allocating hash table via alloc_large_system_hash [ 0.023318] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) [ 0.024486] software IO TLB: area num 16. [ 0.041212] Memory: 1744240K/33179224K available (14336K kernel code, 2348K rwdata, 10196K rodata, 3956K init, 7832K bss, 819292K reserved, 0K cma-reserved) [ 0.041442] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.041485] Kernel/User page tables isolation: enabled [ 0.041521] ftrace: allocating 42369 entries in 166 pages [ 0.048032] ftrace: allocated 166 pages with 4 groups [ 0.048821] Dynamic Preempt: voluntary [ 0.049100] rcu: Preemptible hierarchical RCU implementation. [ 0.049101] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. [ 0.049102] Trampoline variant of Tasks RCU enabled. [ 0.049102] Rude variant of Tasks RCU enabled. [ 0.049103] Tracing variant of Tasks RCU enabled. [ 0.049103] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.049104] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.057313] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 [ 0.057719] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.058121] Console: colour dummy device 80x25 [ 0.058123] printk: legacy console [tty0] enabled [ 0.058180] ACPI: Core revision 20230628 [ 0.058586] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.058588] APIC: Switch to symmetric I/O mode setup [ 0.058589] DMAR: Host address width 39 [ 0.058590] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.058611] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.058614] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.058627] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.058629] DMAR: RMRR base: 0x0000006d645000 end: 0x0000006d664fff [ 0.058634] DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff [ 0.058638] DMAR: RMRR base: 0x0000006d6f1000 end: 0x0000006d770fff [ 0.058643] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.058644] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.058645] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.061848] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.061850] x2apic enabled [ 0.061921] APIC: Switched APIC routing to: cluster x2apic [ 0.071475] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns [ 0.071481] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=10399968) [ 0.071511] CPU0: Thermal monitoring enabled (TM1) [ 0.071560] process: using mwait in idle threads [ 0.071562] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.071563] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.071567] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.071569] Spectre V2 : Mitigation: IBRS [ 0.071570] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.071570] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.071571] RETBleed: Mitigation: IBRS [ 0.071572] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.071573] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.071575] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.071580] MDS: Mitigation: Clear CPU buffers [ 0.071581] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.071584] SRBDS: Mitigation: Microcode [ 0.071590] GDS: Mitigation: Microcode [ 0.071595] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.071597] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.071598] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.071599] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.071600] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.071601] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.071603] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.071604] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.071605] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.075478] Freeing SMP alternatives memory: 36K [ 0.075478] pid_max: default: 32768 minimum: 301 [ 0.075478] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf [ 0.075478] landlock: Up and running. [ 0.075478] Yama: becoming mindful. [ 0.075478] AppArmor: AppArmor initialized [ 0.075478] TOMOYO Linux initialized [ 0.075478] LSM support for eBPF active [ 0.075478] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.075478] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.075478] smpboot: CPU0: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz (family: 0x6, model: 0x9e, stepping: 0xa) [ 0.075478] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.075478] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.075478] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.075478] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.075478] ... version: 4 [ 0.075478] ... bit width: 48 [ 0.075478] ... generic registers: 4 [ 0.075478] ... value mask: 0000ffffffffffff [ 0.075478] ... max period: 00007fffffffffff [ 0.075478] ... fixed-purpose events: 3 [ 0.075478] ... event mask: 000000070000000f [ 0.075478] signal: max sigframe size: 2032 [ 0.075478] Estimated ratio of average max frequency by base frequency (times 1024): 1654 [ 0.075478] rcu: Hierarchical SRCU implementation. [ 0.075478] rcu: Max phase no-delay instances is 1000. [ 0.075478] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.075478] smp: Bringing up secondary CPUs ... [ 0.075478] smpboot: x86: Booting SMP configuration: [ 0.075478] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 [ 0.079659] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.079659] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.079659] smp: Brought up 1 node, 12 CPUs [ 0.079659] smpboot: Max logical packages: 1 [ 0.079659] smpboot: Total of 12 processors activated (62399.80 BogoMIPS) [ 0.115970] node 0 deferred pages initialised in 32ms [ 0.116337] devtmpfs: initialized [ 0.116337] x86/mm: Memory block size: 128MB [ 0.133673] ACPI: PM: Registering ACPI NVS region [mem 0x5c4b4000-0x5c4b4fff] (4096 bytes) [ 0.133673] ACPI: PM: Registering ACPI NVS region [mem 0x6d7ee000-0x6e162fff] (9916416 bytes) [ 0.136754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.136771] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.136949] pinctrl core: initialized pinctrl subsystem [ 0.137760] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.138475] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.138693] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.138902] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.138940] audit: initializing netlink subsys (disabled) [ 0.138970] audit: type=2000 audit(1709304074.064:1): state=initialized audit_enabled=0 res=1 [ 0.138970] thermal_sys: Registered thermal governor 'fair_share' [ 0.138970] thermal_sys: Registered thermal governor 'bang_bang' [ 0.138970] thermal_sys: Registered thermal governor 'step_wise' [ 0.138970] thermal_sys: Registered thermal governor 'user_space' [ 0.138970] thermal_sys: Registered thermal governor 'power_allocator' [ 0.138970] cpuidle: using governor ladder [ 0.138970] cpuidle: using governor menu [ 0.139543] Simple Boot Flag at 0x47 set to 0x80 [ 0.139588] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.139857] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f] [ 0.139861] PCI: not using ECAM ([mem 0xf0000000-0xf7ffffff] not reserved) [ 0.139862] PCI: Using configuration type 1 for base access [ 0.140049] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.140058] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.140058] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.140058] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.140058] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.140069] ACPI: Added _OSI(Module Device) [ 0.140069] ACPI: Added _OSI(Processor Device) [ 0.140069] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.140069] ACPI: Added _OSI(Processor Aggregator Device) [ 0.393087] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.475831] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.482440] ACPI Error: AE_ERROR, Returned by Handler for [PCI_Config] (20230628/evregion-300) [ 0.482455] Initialized Local Variables for Method [_INI]: [ 0.482456] Local0: (____ptrval____) [RefOf] <Node> Name _OSI Method (____ptrval____) [ 0.482461] No Arguments are initialized for method [_INI] [ 0.482465] ACPI Error: Aborting method \_SB.PCI0._INI due to previous error (AE_ERROR) (20230628/psparse-529) [ 0.482481] ACPI Error: AE_ERROR, during \_SB.PCI0._INI execution (20230628/nsinit-657) [ 0.505953] ACPI: Dynamic OEM Table Load: [ 0.505960] ACPI: SSDT 0xFFFF9EEE81C6E000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.510133] ACPI: Dynamic OEM Table Load: [ 0.510139] ACPI: SSDT 0xFFFF9EEE81C93000 000581 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.513455] ACPI: Dynamic OEM Table Load: [ 0.513460] ACPI: SSDT 0xFFFF9EEE828A8600 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.515760] ACPI: Dynamic OEM Table Load: [ 0.515764] ACPI: SSDT 0xFFFF9EEE81CA4600 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.517572] ACPI: Dynamic OEM Table Load: [ 0.517581] ACPI: SSDT 0xFFFF9EEE81C93800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.520635] ACPI: Dynamic OEM Table Load: [ 0.520641] ACPI: SSDT 0xFFFF9EEE81C92000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.524002] ACPI: Dynamic OEM Table Load: [ 0.524008] ACPI: SSDT 0xFFFF9EEE81C6D000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.526609] ACPI: Dynamic OEM Table Load: [ 0.526615] ACPI: SSDT 0xFFFF9EEE801BB000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.534871] ACPI: Dynamic OEM Table Load: [ 0.534879] ACPI: SSDT 0xFFFF9EEE81C6F000 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.557136] ACPI: _OSC evaluated successfully for all CPUs [ 0.557812] ACPI: EC: EC started [ 0.557813] ACPI: EC: interrupt blocked [ 0.575343] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.575350] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.575352] ACPI: Interpreter enabled [ 0.575426] ACPI: PM: (supports S0 S3 S4 S5) [ 0.575428] ACPI: Using IOAPIC for interrupt routing [ 0.575558] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f] [ 0.579895] PCI: ECAM [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource [ 0.579912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.579913] PCI: Ignoring E820 reservations for host bridge windows [ 0.582559] ACPI: Enabled 10 GPEs in block 00 to 7F [ 0.591977] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource [ 0.607377] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.607619] ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource [ 0.629367] ACPI: \_SB_.PCI0.RP17.PXP_: New power resource [ 0.672715] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource [ 0.708326] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource [ 0.709580] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource [ 0.710816] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource [ 0.763247] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource [ 0.814788] ACPI: \PIN_: New power resource [ 0.814788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.814788] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.816430] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.824096] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR] [ 0.828014] PCI host bridge to bus 0000:00 [ 0.828018] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.828022] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.828027] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.828030] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window] [ 0.828033] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.828036] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.828085] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000 conventional PCI endpoint [ 0.828241] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port [ 0.828253] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.828255] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.828257] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff] [ 0.828262] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.828298] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.831359] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.831367] pci 0000:00:02.0: BAR 0 [mem 0xeb000000-0xebffffff 64bit] [ 0.831372] pci 0000:00:02.0: BAR 2 [mem 0x80000000-0x8fffffff 64bit pref] [ 0.831375] pci 0000:00:02.0: BAR 4 [io 0x4000-0x403f] [ 0.831400] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.831404] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.832225] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint [ 0.832233] pci 0000:00:04.0: BAR 0 [mem 0xed510000-0xed517fff 64bit] [ 0.833250] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 conventional PCI endpoint [ 0.833258] pci 0000:00:08.0: BAR 0 [mem 0xed528000-0xed528fff 64bit] [ 0.833515] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 conventional PCI endpoint [ 0.833550] pci 0000:00:12.0: BAR 0 [mem 0xed527000-0xed527fff 64bit] [ 0.833914] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 conventional PCI endpoint [ 0.833950] pci 0000:00:14.0: BAR 0 [mem 0xed500000-0xed50ffff 64bit] [ 0.834098] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.835334] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 conventional PCI endpoint [ 0.835364] pci 0000:00:14.2: BAR 0 [mem 0xed51e000-0xed51ffff 64bit] [ 0.835383] pci 0000:00:14.2: BAR 2 [mem 0xed526000-0xed526fff 64bit] [ 0.840054] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000 conventional PCI endpoint [ 0.840592] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] [ 0.844668] pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000 conventional PCI endpoint [ 0.845241] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] [ 0.848543] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 conventional PCI endpoint [ 0.848575] pci 0000:00:16.0: BAR 0 [mem 0xed523000-0xed523fff 64bit] [ 0.848701] pci 0000:00:16.0: PME# supported from D3hot [ 0.850502] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601 conventional PCI endpoint [ 0.850548] pci 0000:00:17.0: BAR 0 [mem 0xed51c000-0xed51dfff] [ 0.850574] pci 0000:00:17.0: BAR 1 [mem 0xed522000-0xed5220ff] [ 0.850600] pci 0000:00:17.0: BAR 2 [io 0x4090-0x4097] [ 0.850623] pci 0000:00:17.0: BAR 3 [io 0x4080-0x4083] [ 0.850648] pci 0000:00:17.0: BAR 4 [io 0x4060-0x407f] [ 0.850671] pci 0000:00:17.0: BAR 5 [mem 0xed521000-0xed5217ff] [ 0.850823] pci 0000:00:17.0: PME# supported from D3hot [ 0.852734] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 PCIe Root Port [ 0.852791] pci 0000:00:1b.0: PCI bridge to [bus 02-3a] [ 0.852802] pci 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff] [ 0.852821] pci 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.852968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.853018] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity [ 0.856303] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400 PCIe Root Port [ 0.856360] pci 0000:00:1c.0: PCI bridge to [bus 3b] [ 0.856372] pci 0000:00:1c.0: bridge window [mem 0xed400000-0xed4fffff] [ 0.856532] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.856579] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.860111] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400 PCIe Root Port [ 0.860168] pci 0000:00:1c.4: PCI bridge to [bus 3c] [ 0.860179] pci 0000:00:1c.4: bridge window [mem 0xed300000-0xed3fffff] [ 0.860331] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.860375] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity [ 0.863594] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 PCIe Root Port [ 0.863651] pci 0000:00:1d.0: PCI bridge to [bus 3d] [ 0.863663] pci 0000:00:1d.0: bridge window [mem 0xed200000-0xed2fffff] [ 0.863815] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.863859] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.867118] pci 0000:00:1f.0: [8086:a30e] type 00 class 0x060100 conventional PCI endpoint [ 0.868300] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040380 conventional PCI endpoint [ 0.868359] pci 0000:00:1f.3: BAR 0 [mem 0xed518000-0xed51bfff 64bit] [ 0.868433] pci 0000:00:1f.3: BAR 4 [mem 0xed100000-0xed1fffff 64bit] [ 0.868592] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.870533] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 conventional PCI endpoint [ 0.870713] pci 0000:00:1f.4: BAR 0 [mem 0xed520000-0xed5200ff 64bit] [ 0.870927] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] [ 0.872114] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 conventional PCI endpoint [ 0.872140] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] [ 0.872504] pci 0000:01:00.0: [10de:1f91] type 00 class 0x030200 PCIe Endpoint [ 0.872523] pci 0000:01:00.0: BAR 0 [mem 0xec000000-0xecffffff] [ 0.872538] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.872552] pci 0000:01:00.0: BAR 3 [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.872561] pci 0000:01:00.0: BAR 5 [io 0x3000-0x307f] [ 0.872569] pci 0000:01:00.0: ROM [mem 0xed000000-0xed07ffff pref] [ 0.872675] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.875161] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.875845] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400 PCIe Switch Upstream Port [ 0.875903] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 0.875918] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff] [ 0.875937] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.875960] pci 0000:02:00.0: enabling Extended Tags [ 0.876135] pci 0000:02:00.0: supports D1 D2 [ 0.876136] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.876775] pci 0000:00:1b.0: PCI bridge to [bus 02-3a] [ 0.876997] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.877054] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.877069] pci 0000:03:00.0: bridge window [mem 0xea000000-0xea0fffff] [ 0.877112] pci 0000:03:00.0: enabling Extended Tags [ 0.877292] pci 0000:03:00.0: supports D1 D2 [ 0.877293] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.877682] pci 0000:03:01.0: [8086:15da] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.877739] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 0.877754] pci 0000:03:01.0: bridge window [mem 0xd4000000-0xe9efffff] [ 0.877773] pci 0000:03:01.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.877797] pci 0000:03:01.0: enabling Extended Tags [ 0.877985] pci 0000:03:01.0: supports D1 D2 [ 0.877986] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.878372] pci 0000:03:02.0: [8086:15da] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.878428] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 0.878443] pci 0000:03:02.0: bridge window [mem 0xe9f00000-0xe9ffffff] [ 0.878485] pci 0000:03:02.0: enabling Extended Tags [ 0.878659] pci 0000:03:02.0: supports D1 D2 [ 0.878660] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.879229] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 0.879405] pci 0000:04:00.0: [8086:15d9] type 00 class 0x088000 PCIe Endpoint [ 0.879433] pci 0000:04:00.0: BAR 0 [mem 0xea000000-0xea03ffff] [ 0.879449] pci 0000:04:00.0: BAR 1 [mem 0xea040000-0xea040fff] [ 0.879531] pci 0000:04:00.0: enabling Extended Tags [ 0.879717] pci 0000:04:00.0: supports D1 D2 [ 0.879719] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.880135] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.880270] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 0.880489] pci 0000:3a:00.0: [8086:15db] type 00 class 0x0c0330 PCIe Endpoint [ 0.880518] pci 0000:3a:00.0: BAR 0 [mem 0xe9f00000-0xe9f0ffff] [ 0.880812] pci 0000:3a:00.0: supports D1 D2 [ 0.880813] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.880978] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.881433] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 0.882896] pci 0000:3b:00.0: [8086:2723] type 00 class 0x028000 PCIe Endpoint [ 0.883317] pci 0000:3b:00.0: BAR 0 [mem 0xed400000-0xed403fff 64bit] [ 0.886071] pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold [ 0.887248] pci 0000:00:1c.0: PCI bridge to [bus 3b] [ 0.887750] pci 0000:3c:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint [ 0.887784] pci 0000:3c:00.0: BAR 1 [mem 0xed300000-0xed300fff] [ 0.887977] pci 0000:3c:00.0: supports D1 D2 [ 0.887978] pci 0000:3c:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.888534] pci 0000:00:1c.4: PCI bridge to [bus 3c] [ 0.889034] pci 0000:3d:00.0: [8086:f1a6] type 00 class 0x010802 PCIe Endpoint [ 0.889073] pci 0000:3d:00.0: BAR 0 [mem 0xed200000-0xed203fff 64bit] [ 0.889843] pci 0000:00:1d.0: PCI bridge to [bus 3d] [ 0.908886] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.909221] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.909546] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.909868] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.910193] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.910518] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.910841] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.911162] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 1.033033] Low-power S0 idle used by default for system suspend [ 1.055488] ACPI: EC: interrupt unblocked [ 1.055489] ACPI: EC: event unblocked [ 1.055495] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 1.055497] ACPI: EC: GPE=0x6e [ 1.055500] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 1.055504] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 1.055834] iommu: Default domain type: Translated [ 1.055834] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.055892] pps_core: LinuxPPS API ver. 1 registered [ 1.055893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.055907] PTP clock support registered [ 1.055931] EDAC MC: Ver: 3.0.0 [ 1.056690] efivars: Registered efivars operations [ 1.056690] NetLabel: Initializing [ 1.056690] NetLabel: domain hash size = 128 [ 1.056690] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.056690] NetLabel: unlabeled traffic allowed by default [ 1.056690] PCI: Using ACPI for IRQ routing [ 1.086636] PCI: pci_cache_line_size set to 64 bytes [ 1.087235] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.087241] e820: reserve RAM buffer [mem 0x55fda018-0x57ffffff] [ 1.087244] e820: reserve RAM buffer [mem 0x5c4b4000-0x5fffffff] [ 1.087247] e820: reserve RAM buffer [mem 0x66e9d000-0x67ffffff] [ 1.087249] e820: reserve RAM buffer [mem 0x6bff9000-0x6bffffff] [ 1.087252] e820: reserve RAM buffer [mem 0x78e00000-0x7bffffff] [ 1.087254] e820: reserve RAM buffer [mem 0x87c800000-0x87fffffff] [ 1.087490] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.087492] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.087493] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.087505] vgaarb: loaded [ 1.087622] clocksource: Switched to clocksource tsc-early [ 1.091315] VFS: Disk quotas dquot_6.6.0 [ 1.091359] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.092497] AppArmor: AppArmor Filesystem Enabled [ 1.092547] pnp: PnP ACPI init [ 1.092932] system 00:00: [mem 0x40000000-0x403fffff] has been reserved [ 1.093517] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.093523] system 00:01: [io 0x164e-0x164f] has been reserved [ 1.094086] system 00:03: [io 0x1854-0x1857] has been reserved [ 1.095912] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.095918] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.095923] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.095928] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 1.095933] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.095938] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.095943] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.095948] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.096681] system 00:07: [io 0x1800-0x18fe] could not be reserved [ 1.096688] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved [ 1.096694] system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 1.096699] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 1.096704] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 1.096709] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved [ 1.096714] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 1.097762] system 00:08: [io 0x2000-0x20fe] has been reserved [ 1.131219] pnp: PnP ACPI: found 10 devices [ 1.140771] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.141023] NET: Registered PF_INET protocol family [ 1.141166] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.153713] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.153745] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.153849] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.154106] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.154304] TCP: Hash tables configured (established 262144 bind 65536) [ 1.154554] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 1.154646] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.154711] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.154928] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.154947] NET: Registered PF_XDP protocol family [ 1.154958] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 1.154964] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 1000 [ 1.154969] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 2000 [ 1.154992] pci 0000:00:15.0: BAR 0 [mem 0x7f800000-0x7f800fff 64bit]: assigned [ 1.155261] pci 0000:00:15.1: BAR 0 [mem 0x7f801000-0x7f801fff 64bit]: assigned [ 1.155529] pci 0000:00:1b.0: bridge window [io 0x5000-0x6fff]: assigned [ 1.155532] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.155534] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 1.155536] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff] [ 1.155538] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.155546] pci 0000:02:00.0: bridge window [io 0x5000-0x5fff]: assigned [ 1.155552] pci 0000:03:01.0: bridge window [io 0x5000-0x5fff]: assigned [ 1.155554] pci 0000:03:00.0: PCI bridge to [bus 04] [ 1.155565] pci 0000:03:00.0: bridge window [mem 0xea000000-0xea0fffff] [ 1.155578] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 1.155581] pci 0000:03:01.0: bridge window [io 0x5000-0x5fff] [ 1.155588] pci 0000:03:01.0: bridge window [mem 0xd4000000-0xe9efffff] [ 1.155593] pci 0000:03:01.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.155602] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 1.155609] pci 0000:03:02.0: bridge window [mem 0xe9f00000-0xe9ffffff] [ 1.155622] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 1.155625] pci 0000:02:00.0: bridge window [io 0x5000-0x5fff] [ 1.155632] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff] [ 1.155638] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.155646] pci 0000:00:1b.0: PCI bridge to [bus 02-3a] [ 1.155649] pci 0000:00:1b.0: bridge window [io 0x5000-0x6fff] [ 1.155656] pci 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff] [ 1.155661] pci 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.155671] pci 0000:00:1c.0: PCI bridge to [bus 3b] [ 1.155680] pci 0000:00:1c.0: bridge window [mem 0xed400000-0xed4fffff] [ 1.155693] pci 0000:00:1c.4: PCI bridge to [bus 3c] [ 1.155699] pci 0000:00:1c.4: bridge window [mem 0xed300000-0xed3fffff] [ 1.155713] pci 0000:00:1d.0: PCI bridge to [bus 3d] [ 1.155721] pci 0000:00:1d.0: bridge window [mem 0xed200000-0xed2fffff] [ 1.155735] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.155736] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.155737] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 1.155739] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window] [ 1.155740] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window] [ 1.155741] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 1.155742] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff] [ 1.155743] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.155745] pci_bus 0000:02: resource 0 [io 0x5000-0x6fff] [ 1.155746] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xea0fffff] [ 1.155747] pci_bus 0000:02: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.155748] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 1.155749] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xea0fffff] [ 1.155751] pci_bus 0000:03: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.155752] pci_bus 0000:04: resource 1 [mem 0xea000000-0xea0fffff] [ 1.155753] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 1.155754] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xe9efffff] [ 1.155755] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.155757] pci_bus 0000:3a: resource 1 [mem 0xe9f00000-0xe9ffffff] [ 1.155758] pci_bus 0000:3b: resource 1 [mem 0xed400000-0xed4fffff] [ 1.155759] pci_bus 0000:3c: resource 1 [mem 0xed300000-0xed3fffff] [ 1.155760] pci_bus 0000:3d: resource 1 [mem 0xed200000-0xed2fffff] [ 1.157673] pci 0000:02:00.0: CLS mismatch (64 != 128), using 64 bytes [ 1.158281] pci 0000:02:00.0: enabling device (0006 -> 0007) [ 1.158968] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.158969] software IO TLB: mapped [mem 0x0000000062e9d000-0x0000000066e9d000] (64MB) [ 1.159040] sgx: EPC section 0x70200000-0x75f7ffff [ 1.159068] Unpacking initramfs... [ 1.161239] Initialise system trusted keyrings [ 1.161258] Key type blacklist registered [ 1.161340] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.161362] zbud: loaded [ 1.161851] alg: self-tests disabled [ 1.174178] Key type asymmetric registered [ 1.174182] Asymmetric key parser 'x509' registered [ 1.208267] Freeing initrd memory: 30400K [ 1.213335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.213419] io scheduler mq-deadline registered [ 1.219875] pcieport 0000:00:01.0: PME: Signaling with IRQ 122 [ 1.220214] pcieport 0000:00:1b.0: PME: Signaling with IRQ 123 [ 1.220300] pcieport 0000:00:1b.0: pciehp: Slot #20 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.221341] pcieport 0000:00:1c.0: PME: Signaling with IRQ 124 [ 1.222274] pcieport 0000:00:1c.4: PME: Signaling with IRQ 125 [ 1.223188] pcieport 0000:00:1d.0: PME: Signaling with IRQ 126 [ 1.223989] pcieport 0000:03:01.0: enabling device (0006 -> 0007) [ 1.224407] pcieport 0000:03:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.225141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.239390] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.239392] ACPI: thermal: Thermal Zone [THM] (25 C) [ 1.239724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.241642] hpet_acpi_add: no address or irqs in _CRS [ 1.241668] Linux agpgart interface v0.103 [ 1.269649] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1) [ 1.302565] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.311607] i8042: Warning: Keylock active [ 1.313488] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.313495] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.313879] mousedev: PS/2 mouse device common for all mice [ 1.313928] rtc_cmos 00:02: RTC can wake from S4 [ 1.315794] rtc_cmos 00:02: registered as rtc0 [ 1.316107] rtc_cmos 00:02: setting system clock to 2024-03-01T14:41:15 UTC (1709304075) [ 1.316178] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 1.316964] intel_pstate: Intel P-state driver initializing [ 1.318652] intel_pstate: Disabling energy efficiency optimization [ 1.318653] intel_pstate: HWP enabled [ 1.318723] ledtrig-cpu: registered to indicate activity on CPUs [ 1.318883] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.320811] efifb: probing for efifb [ 1.320835] efifb: framebuffer at 0x80000000, using 32400k, total 32400k [ 1.320837] efifb: mode is 3840x2160x32, linelength=15360, pages=1 [ 1.320838] efifb: scrolling: redraw [ 1.320839] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.321136] Console: switching to colour frame buffer device 240x67 [ 1.325950] fb0: EFI VGA frame buffer device [ 1.326309] NET: Registered PF_INET6 protocol family [ 1.332612] Segment Routing with IPv6 [ 1.332633] In-situ OAM (IOAM) with IPv6 [ 1.332671] mip6: Mobile IPv6 [ 1.332682] NET: Registered PF_PACKET protocol family [ 1.332860] mpls_gso: MPLS GSO support [ 1.335081] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 1.335596] microcode: Current revision: 0x000000f4 [ 1.336257] IPI shorthand broadcast: enabled [ 1.341426] sched_clock: Marking stable (1324001860, 13449928)->(1382730335, -45278547) [ 1.341853] registered taskstats version 1 [ 1.342551] Loading compiled-in X.509 certificates [ 1.348129] Loaded X.509 cert 'Build time autogenerated kernel key: e3243bb5ca68fc73af01c3d9789cd4544b335445' [ 1.357094] kmemleak: Kernel memory leak detector initialized (mem pool available: 15668) [ 1.357137] kmemleak: Automatic memory scanning thread started [ 1.357381] Key type .fscrypt registered [ 1.357382] Key type fscrypt-provisioning registered [ 1.364920] cryptd: module verification failed: signature and/or required key missing - tainting kernel [ 1.365824] cryptd: max_cpu_qlen set to 1000 [ 1.370698] AVX2 version of gcm_enc/dec engaged. [ 1.370968] AES CTR mode by8 optimization enabled [ 1.397334] Key type encrypted registered [ 1.397342] AppArmor: AppArmor sha256 policy hashing enabled [ 1.401796] RAS: Correctable Errors collector initialized. [ 1.401915] clk: Disabling unused clocks [ 1.404821] Freeing unused decrypted memory: 2036K [ 1.405332] Freeing unused kernel image (initmem) memory: 3956K [ 1.441868] Write protecting the kernel read-only data: 24576k [ 1.442952] Freeing unused kernel image (rodata/data gap) memory: 44K [ 1.515316] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.515318] x86/mm: Checking user space page tables [ 1.551912] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.551953] Run /init as init process [ 1.551954] with arguments: [ 1.551955] /init [ 1.551956] with environment: [ 1.551957] HOME=/ [ 1.551957] TERM=linux [ 1.551958] BOOT_IMAGE=/vmlinuz-6.8.0-rc6+ [ 1.561369] systemd[1]: Inserted module 'autofs4' [ 1.759567] systemd[1]: systemd 255.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 1.759574] systemd[1]: Detected architecture x86-64. [ 1.759577] systemd[1]: Running in initrd. [ 1.759899] systemd[1]: No hostname configured, using default hostname. [ 1.760012] systemd[1]: Hostname set to <localhost>. [ 1.760105] systemd[1]: Initializing machine ID from random generator. [ 1.807650] systemd-hibernate-resume-generator[229]: Reported hibernation image: ID=debian kernel=6.8.0-rc2+ UUID=fa9c13bb-d49c-464f-8922-db493a3fc0ad offset=0 [ 1.869070] systemd[1]: Queued start job for default target initrd.target. [ 1.922106] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 1.922360] systemd[1]: Expecting device dev-disk-by\x2duuid-9fa41e21\x2d7a5f\x2d479e\x2dafdc\x2d9a5503368d8e.device - /dev/disk/by-uuid/9fa41e21-7a5f-479e-afdc-9a5503368d8e... [ 1.922408] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 1.922488] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System. [ 1.922541] systemd[1]: Reached target paths.target - Path Units. [ 1.922602] systemd[1]: Reached target slices.target - Slice Units. [ 1.922654] systemd[1]: Reached target swap.target - Swaps. [ 1.922698] systemd[1]: Reached target timers.target - Timer Units. [ 1.923708] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 1.924594] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 1.925546] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 1.926243] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 1.926305] systemd[1]: Reached target sockets.target - Socket Units. [ 1.926589] systemd[1]: dracut-cmdline-ask.service - dracut ask for additional cmdline parameters was skipped because no trigger condition checks were met. [ 1.934363] systemd[1]: Starting dracut-cmdline.service - dracut cmdline hook... [ 1.940073] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 1.950822] systemd[1]: Starting systemd-journald.service - Journal Service... [ 1.954917] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 1.963220] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 1.966595] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 1.982199] systemd-journald[261]: Collecting audit messages is disabled. [ 1.987797] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 1.989543] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 1.991510] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 1.993175] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 2.008336] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 2.008538] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 2.008556] systemd[1]: Reached target local-fs.target - Local File Systems. [ 2.010578] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 2.047633] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.181681] tsc: Refined TSC clocksource calibration: 2592.000 MHz [ 2.181687] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns [ 2.181742] clocksource: Switched to clocksource tsc [ 2.187906] device-mapper: uevent: version 1.0.3 [ 2.188234] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.582659] rtsx_pci 0000:3c:00.0: enabling device (0000 -> 0002) [ 2.607048] ACPI: bus type USB registered [ 2.607272] usbcore: registered new interface driver usbfs [ 2.607368] usbcore: registered new interface driver hub [ 2.607503] usbcore: registered new device driver usb [ 2.626683] ACPI: bus type drm_connector registered [ 2.631002] SCSI subsystem initialized [ 2.640201] hid: raw HID events driver (C) Jiri Kosina [ 2.662806] libata version 3.00 loaded. [ 2.664746] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.664790] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.666093] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 2.666105] xhci_hcd 0000:00:14.0: supports USB remote wakeup [ 2.668640] nvme nvme0: pci function 0000:3d:00.0 [ 2.670219] ahci 0000:00:17.0: version 3.0 [ 2.671288] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.671303] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.671312] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.671313] xhci_hcd 0000:00:14.0: supports USB remote wakeup [ 2.671469] usb usb1: default language 0x0409 [ 2.671528] usb usb1: udev 1, busnum 1, minor = 0 [ 2.671530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 2.671533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.671534] usb usb1: Product: xHCI Host Controller [ 2.671536] usb usb1: Manufacturer: Linux 6.8.0-rc6+ xhci-hcd [ 2.671537] usb usb1: SerialNumber: 0000:00:14.0 [ 2.671552] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode [ 2.671556] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst [ 2.672324] usb usb1: usb_probe_device [ 2.672327] usb usb1: configuration #1 chosen from 1 choice [ 2.672359] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.675114] hub 1-0:1.0: usb_probe_interface [ 2.675117] hub 1-0:1.0: usb_probe_interface - got id [ 2.675119] hub 1-0:1.0: USB hub found [ 2.675204] hub 1-0:1.0: 16 ports detected [ 2.675209] hub 1-0:1.0: standalone hub [ 2.675210] hub 1-0:1.0: no power switching (usb 1.0) [ 2.675211] hub 1-0:1.0: individual port over-current protection [ 2.675212] hub 1-0:1.0: Single TT [ 2.675213] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.675215] hub 1-0:1.0: power on to power good time: 20ms [ 2.675247] hub 1-0:1.0: local power source is good [ 2.676322] scsi host0: ahci [ 2.677343] scsi host1: ahci [ 2.678402] scsi host2: ahci [ 2.678968] ata1: DUMMY [ 2.678969] ata2: DUMMY [ 2.678975] ata3: SATA max UDMA/133 abar m2048@0xed521000 port 0xed521200 irq 140 lpm-pol 0 [ 2.683534] nvme nvme0: 12/0/0 default/read/poll queues [ 2.691217] nvme0n1: p1 p2 p3 p4 [ 2.725897] usb usb1-port4: DeviceRemovable is changed to 1 according to platform information. [ 2.725900] usb usb1-port7: DeviceRemovable is changed to 1 according to platform information. [ 2.725901] usb usb1-port9: DeviceRemovable is changed to 1 according to platform information. [ 2.725902] usb usb1-port12: DeviceRemovable is changed to 1 according to platform information. [ 2.725904] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.726782] usb usb2: skipped 1 descriptor after endpoint [ 2.726803] usb usb2: default language 0x0409 [ 2.726857] usb usb2: udev 1, busnum 2, minor = 128 [ 2.726859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 2.726861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.726863] usb usb2: Product: xHCI Host Controller [ 2.726864] usb usb2: Manufacturer: Linux 6.8.0-rc6+ xhci-hcd [ 2.726865] usb usb2: SerialNumber: 0000:00:14.0 [ 2.727525] usb usb2: usb_probe_device [ 2.727528] usb usb2: configuration #1 chosen from 1 choice [ 2.727590] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.729159] hub 2-0:1.0: usb_probe_interface [ 2.729161] hub 2-0:1.0: usb_probe_interface - got id [ 2.729163] hub 2-0:1.0: USB hub found [ 2.729234] hub 2-0:1.0: 10 ports detected [ 2.729238] hub 2-0:1.0: standalone hub [ 2.729239] hub 2-0:1.0: no power switching (usb 1.0) [ 2.729240] hub 2-0:1.0: individual port over-current protection [ 2.729241] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.729242] hub 2-0:1.0: power on to power good time: 100ms [ 2.729273] hub 2-0:1.0: local power source is good [ 2.733013] usb usb2-port1: peered to usb1-port1 [ 2.736720] usb usb2-port2: peered to usb1-port2 [ 2.753524] usb usb1-port1: status 0301 change 0001 [ 2.753559] usb usb1-port2: status 0301 change 0001 [ 2.753612] usb usb1-port4: status 0101 change 0001 [ 2.753634] usb usb1-port5: status 0101 change 0001 [ 2.753665] usb usb1-port7: status 0101 change 0001 [ 2.753724] usb usb1-port12: status 0101 change 0001 [ 2.762424] usb usb2: port-1 no _DSM function 5 [ 2.762446] usb usb2: port-2 no _DSM function 5 [ 2.762466] usb usb2: port-3 no _DSM function 5 [ 2.762486] usb usb2: port-4 no _DSM function 5 [ 2.762505] usb usb2: port-5 no _DSM function 5 [ 2.762526] usb usb2: port-6 no _DSM function 5 [ 2.762545] usb usb2: port-7 no _DSM function 5 [ 2.762565] usb usb2: port-8 no _DSM function 5 [ 2.762584] usb usb2: port-9 no _DSM function 5 [ 2.762605] usb usb2: port-10 no _DSM function 5 [ 2.762606] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.763504] xhci_hcd 0000:3a:00.0: xHCI Host Controller [ 2.763523] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3 [ 2.764805] xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 2.764813] xhci_hcd 0000:3a:00.0: supports USB remote wakeup [ 2.766208] xhci_hcd 0000:3a:00.0: xHCI Host Controller [ 2.766221] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4 [ 2.766228] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.766230] xhci_hcd 0000:3a:00.0: supports USB remote wakeup [ 2.766320] usb usb3: default language 0x0409 [ 2.766386] usb usb3: udev 1, busnum 3, minor = 256 [ 2.766388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 2.766390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.766391] usb usb3: Product: xHCI Host Controller [ 2.766411] usb usb3: Manufacturer: Linux 6.8.0-rc6+ xhci-hcd [ 2.766412] usb usb3: SerialNumber: 0000:3a:00.0 [ 2.766931] usb usb3: usb_probe_device [ 2.766934] usb usb3: configuration #1 chosen from 1 choice [ 2.766962] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.767115] hub 3-0:1.0: usb_probe_interface [ 2.767116] hub 3-0:1.0: usb_probe_interface - got id [ 2.767118] hub 3-0:1.0: USB hub found [ 2.767153] hub 3-0:1.0: 2 ports detected [ 2.767157] hub 3-0:1.0: standalone hub [ 2.767158] hub 3-0:1.0: no power switching (usb 1.0) [ 2.767159] hub 3-0:1.0: individual port over-current protection [ 2.767160] hub 3-0:1.0: Single TT [ 2.767161] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.767163] hub 3-0:1.0: power on to power good time: 20ms [ 2.767187] hub 3-0:1.0: local power source is good [ 2.775615] usb usb3-port1: DeviceRemovable is changed to 1 according to platform information. [ 2.775617] usb usb3-port2: DeviceRemovable is changed to 1 according to platform information. [ 2.775618] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.776041] usb usb4: skipped 1 descriptor after endpoint [ 2.776078] usb usb4: default language 0x0409 [ 2.776134] usb usb4: udev 1, busnum 4, minor = 384 [ 2.776136] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 2.776138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.776139] usb usb4: Product: xHCI Host Controller [ 2.776140] usb usb4: Manufacturer: Linux 6.8.0-rc6+ xhci-hcd [ 2.776142] usb usb4: SerialNumber: 0000:3a:00.0 [ 2.776654] usb usb4: usb_probe_device [ 2.776656] usb usb4: configuration #1 chosen from 1 choice [ 2.776697] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.776841] hub 4-0:1.0: usb_probe_interface [ 2.776843] hub 4-0:1.0: usb_probe_interface - got id [ 2.776845] hub 4-0:1.0: USB hub found [ 2.776875] hub 4-0:1.0: 2 ports detected [ 2.776879] hub 4-0:1.0: standalone hub [ 2.776880] hub 4-0:1.0: no power switching (usb 1.0) [ 2.776881] hub 4-0:1.0: individual port over-current protection [ 2.776882] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.776884] hub 4-0:1.0: power on to power good time: 100ms [ 2.776922] hub 4-0:1.0: local power source is good [ 2.784258] usb usb4-port2: peered to usb3-port1 [ 2.784288] usb usb4: port-1 no _DSM function 5 [ 2.784308] usb usb4: port-2 no _DSM function 5 [ 2.784309] usb usb4-port2: DeviceRemovable is changed to 1 according to platform information. [ 2.784311] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.797952] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.797957] hub 3-0:1.0: hub_suspend [ 2.797960] usb usb3: bus auto-suspend, wakeup 1 [ 2.797975] usb usb3: suspend raced with wakeup event [ 2.797976] usb usb3: usb auto-resume [ 2.813704] hub 3-0:1.0: hub_resume [ 2.813874] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.813877] hub 3-0:1.0: hub_suspend [ 2.813881] usb usb3: bus auto-suspend, wakeup 1 [ 2.813896] usb usb3: suspend raced with wakeup event [ 2.813897] usb usb3: usb auto-resume [ 2.829541] hub 3-0:1.0: hub_resume [ 2.829637] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.829642] hub 3-0:1.0: hub_suspend [ 2.829646] usb usb3: bus auto-suspend, wakeup 1 [ 2.829668] usb usb3: suspend raced with wakeup event [ 2.829669] usb usb3: usb auto-resume [ 2.845534] hub 3-0:1.0: hub_resume [ 2.845625] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.845628] hub 3-0:1.0: hub_suspend [ 2.845632] usb usb3: bus auto-suspend, wakeup 1 [ 2.845650] usb usb3: suspend raced with wakeup event [ 2.845651] usb usb3: usb auto-resume [ 2.857606] hub 1-0:1.0: state 7 ports 16 chg 10b6 evt 0000 [ 2.857647] usb usb1-port1: status 0301, change 0000, 1.5 Mb/s [ 2.861579] hub 3-0:1.0: hub_resume [ 2.861648] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.861651] hub 3-0:1.0: hub_suspend [ 2.861655] usb usb3: bus auto-suspend, wakeup 1 [ 2.861677] usb usb3: suspend raced with wakeup event [ 2.861678] usb usb3: usb auto-resume [ 2.877521] hub 3-0:1.0: hub_resume [ 2.877577] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.877582] hub 3-0:1.0: hub_suspend [ 2.877586] usb usb3: bus auto-suspend, wakeup 1 [ 2.877620] usb usb3: suspend raced with wakeup event [ 2.877621] usb usb3: usb auto-resume [ 2.885529] usb usb4-port1: status 0203 change 0011 [ 2.893518] hub 3-0:1.0: hub_resume [ 2.893587] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.893591] hub 3-0:1.0: hub_suspend [ 2.893607] usb usb3: bus auto-suspend, wakeup 1 [ 2.893622] usb usb3: suspend raced with wakeup event [ 2.893623] usb usb3: usb auto-resume [ 2.909836] hub 3-0:1.0: hub_resume [ 2.909937] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.909942] hub 3-0:1.0: hub_suspend [ 2.909946] usb usb3: bus auto-suspend, wakeup 1 [ 2.909962] usb usb3: suspend raced with wakeup event [ 2.909963] usb usb3: usb auto-resume [ 2.925527] hub 3-0:1.0: hub_resume [ 2.925588] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.925593] hub 3-0:1.0: hub_suspend [ 2.925598] usb usb3: bus auto-suspend, wakeup 1 [ 2.925614] usb usb3: suspend raced with wakeup event [ 2.925615] usb usb3: usb auto-resume [ 2.941549] hub 3-0:1.0: hub_resume [ 2.941616] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.941621] hub 3-0:1.0: hub_suspend [ 2.941626] usb usb3: bus auto-suspend, wakeup 1 [ 2.941643] usb usb3: suspend raced with wakeup event [ 2.941645] usb usb3: usb auto-resume [ 2.957523] hub 3-0:1.0: hub_resume [ 2.957593] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.957597] hub 3-0:1.0: hub_suspend [ 2.957602] usb usb3: bus auto-suspend, wakeup 1 [ 2.957636] usb usb3: suspend raced with wakeup event [ 2.957637] usb usb3: usb auto-resume [ 2.969505] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 2.969852] hub 2-0:1.0: hub_suspend [ 2.969855] usb usb2: bus auto-suspend, wakeup 1 [ 2.969915] usb usb2: suspend raced with wakeup event [ 2.969916] usb usb2: usb auto-resume [ 2.973522] hub 3-0:1.0: hub_resume [ 2.973601] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.973605] hub 3-0:1.0: hub_suspend [ 2.973609] usb usb3: bus auto-suspend, wakeup 1 [ 2.973624] usb usb3: suspend raced with wakeup event [ 2.973625] usb usb3: usb auto-resume [ 2.985514] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 2.985533] hub 2-0:1.0: hub_resume [ 2.989554] hub 3-0:1.0: hub_resume [ 2.989633] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.989652] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 2.989708] hub 3-0:1.0: hub_suspend [ 2.989714] usb usb3: bus auto-suspend, wakeup 1 [ 2.989729] usb usb3: suspend raced with wakeup event [ 2.989730] usb usb3: usb auto-resume [ 2.989734] usb usb4-port1: status 0203, change 0000, 10.0 Gb/s [ 2.994040] ata3: SATA link down (SStatus 4 SControl 300) [ 3.005532] hub 3-0:1.0: hub_resume [ 3.005609] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.005612] hub 3-0:1.0: hub_suspend [ 3.005616] usb usb3: bus auto-suspend, wakeup 1 [ 3.005640] usb usb3: suspend raced with wakeup event [ 3.005641] usb usb3: usb auto-resume [ 3.013682] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 3.013908] hub 2-0:1.0: hub_suspend [ 3.013912] usb usb2: bus auto-suspend, wakeup 1 [ 3.013953] usb usb2: suspend raced with wakeup event [ 3.013954] usb usb2: usb auto-resume [ 3.021594] hub 3-0:1.0: hub_resume [ 3.021683] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.021692] hub 3-0:1.0: hub_suspend [ 3.021702] usb usb3: bus auto-suspend, wakeup 1 [ 3.021725] usb usb3: suspend raced with wakeup event [ 3.021728] usb usb3: usb auto-resume [ 3.033496] hub 2-0:1.0: hub_resume [ 3.037534] hub 3-0:1.0: hub_resume [ 3.037624] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.037633] hub 3-0:1.0: hub_suspend [ 3.037642] usb usb3: bus auto-suspend, wakeup 1 [ 3.037659] usb usb3: suspend raced with wakeup event [ 3.037661] usb usb3: usb auto-resume [ 3.053578] hub 3-0:1.0: hub_resume [ 3.053696] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.053705] hub 3-0:1.0: hub_suspend [ 3.053714] usb usb3: bus auto-suspend, wakeup 1 [ 3.053731] usb usb3: suspend raced with wakeup event [ 3.053733] usb usb3: usb auto-resume [ 3.061753] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 3.062024] hub 2-0:1.0: hub_suspend [ 3.062031] usb usb2: bus auto-suspend, wakeup 1 [ 3.062078] usb usb2: suspend raced with wakeup event [ 3.062080] usb usb2: usb auto-resume [ 3.069535] hub 3-0:1.0: hub_resume [ 3.069597] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.069603] hub 3-0:1.0: hub_suspend [ 3.069608] usb usb3: bus auto-suspend, wakeup 1 [ 3.069625] usb usb3: suspend raced with wakeup event [ 3.069626] usb usb3: usb auto-resume [ 3.077546] hub 2-0:1.0: hub_resume [ 3.089513] hub 3-0:1.0: hub_resume [ 3.089589] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.089594] hub 3-0:1.0: hub_suspend [ 3.089598] usb usb3: bus auto-suspend, wakeup 1 [ 3.089627] usb usb3: suspend raced with wakeup event [ 3.089629] usb usb3: usb auto-resume [ 3.105513] hub 3-0:1.0: hub_resume [ 3.105777] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.105782] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 3.105786] hub 3-0:1.0: hub_suspend [ 3.105790] usb usb3: bus auto-suspend, wakeup 1 [ 3.105806] usb usb3: suspend raced with wakeup event [ 3.105807] usb usb3: usb auto-resume [ 3.106061] hub 2-0:1.0: hub_suspend [ 3.106065] usb usb2: bus auto-suspend, wakeup 1 [ 3.106113] usb usb2: suspend raced with wakeup event [ 3.106114] usb usb2: usb auto-resume [ 3.117840] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 3.121551] hub 3-0:1.0: hub_resume [ 3.121647] hub 2-0:1.0: hub_resume [ 3.121674] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.121678] hub 3-0:1.0: hub_suspend [ 3.121682] usb usb3: bus auto-suspend, wakeup 1 [ 3.121696] usb usb3: suspend raced with wakeup event [ 3.121698] usb usb3: usb auto-resume [ 3.137521] hub 3-0:1.0: hub_resume [ 3.137626] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.137631] hub 3-0:1.0: hub_suspend [ 3.137635] usb usb3: bus auto-suspend, wakeup 1 [ 3.137663] usb usb3: suspend raced with wakeup event [ 3.137664] usb usb3: usb auto-resume [ 3.138090] usb 1-1: skipped 1 descriptor after interface [ 3.138097] usb 1-1: skipped 1 descriptor after interface [ 3.138700] usb 1-1: default language 0x0409 [ 3.140806] usb 4-1: skipped 1 descriptor after endpoint [ 3.141076] usb 4-1: default language 0x0409 [ 3.141417] usb 1-1: udev 2, busnum 1, minor = 1 [ 3.141420] usb 1-1: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09 [ 3.141422] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.141423] usb 1-1: Product: Fujitsu Keyboard [ 3.141424] usb 1-1: Manufacturer: Fujitsu [ 3.141838] usb 4-1: udev 2, busnum 4, minor = 385 [ 3.141841] usb 4-1: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03 [ 3.141843] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.141844] usb 4-1: Product: USB3.1 Hub [ 3.141846] usb 4-1: Manufacturer: VIA Labs, Inc. [ 3.144813] usb 1-1: usb_probe_device [ 3.144813] usb 4-1: usb_probe_device [ 3.144815] usb 1-1: configuration #1 chosen from 1 choice [ 3.144815] usb 4-1: configuration #1 chosen from 1 choice [ 3.146510] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 3.146875] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 3.148919] hub 4-1:1.0: usb_probe_interface [ 3.148921] hub 4-1:1.0: usb_probe_interface - got id [ 3.148924] hub 4-1:1.0: USB hub found [ 3.148997] usb 1-1: adding 1-1:1.1 (config #1, interface 1) [ 3.149090] hub 4-1:1.0: 4 ports detected [ 3.149095] hub 4-1:1.0: standalone hub [ 3.149096] hub 4-1:1.0: individual port power switching [ 3.149097] hub 4-1:1.0: individual port over-current protection [ 3.149098] hub 4-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 3.149099] hub 4-1:1.0: power on to power good time: 350ms [ 3.149704] hub 4-1:1.0: local power source is good [ 3.153261] usb usb1-port2: status 0301, change 0000, 1.5 Mb/s [ 3.153614] hub 3-0:1.0: hub_resume [ 3.153738] hub 4-1:1.0: enabling power on all ports [ 3.153812] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.153815] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 3.153817] hub 3-0:1.0: hub_suspend [ 3.153820] usb usb3: bus auto-suspend, wakeup 1 [ 3.153836] usb usb3: suspend raced with wakeup event [ 3.153837] usb usb3: usb auto-resume [ 3.154105] hub 2-0:1.0: hub_suspend [ 3.154108] usb usb2: bus auto-suspend, wakeup 1 [ 3.154149] usb usb2: suspend raced with wakeup event [ 3.154149] usb usb2: usb auto-resume [ 3.155131] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.169527] hub 2-0:1.0: hub_resume [ 3.169563] hub 3-0:1.0: hub_resume [ 3.169623] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.169627] hub 3-0:1.0: hub_suspend [ 3.169630] usb usb3: bus auto-suspend, wakeup 1 [ 3.169646] usb usb3: suspend raced with wakeup event [ 3.169647] usb usb3: usb auto-resume [ 3.185588] hub 3-0:1.0: hub_resume [ 3.185647] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.185651] hub 3-0:1.0: hub_suspend [ 3.185654] usb usb3: bus auto-suspend, wakeup 1 [ 3.185667] usb usb3: suspend raced with wakeup event [ 3.185668] usb usb3: usb auto-resume [ 3.197826] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 3.197998] hub 2-0:1.0: hub_suspend [ 3.198002] usb usb2: bus auto-suspend, wakeup 1 [ 3.202413] hub 3-0:1.0: hub_resume [ 3.202453] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.202457] hub 3-0:1.0: hub_suspend [ 3.202460] usb usb3: bus auto-suspend, wakeup 1 [ 3.202474] usb usb3: suspend raced with wakeup event [ 3.202476] usb usb3: usb auto-resume [ 3.206139] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.217534] hub 3-0:1.0: hub_resume [ 3.217588] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.217607] hub 3-0:1.0: hub_suspend [ 3.217625] usb usb3: bus auto-suspend, wakeup 1 [ 3.217640] usb usb3: suspend raced with wakeup event [ 3.217641] usb usb3: usb auto-resume [ 3.233565] hub 3-0:1.0: hub_resume [ 3.233717] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.233721] hub 3-0:1.0: hub_suspend [ 3.233724] usb usb3: bus auto-suspend, wakeup 1 [ 3.233740] usb usb3: suspend raced with wakeup event [ 3.233741] usb usb3: usb auto-resume [ 3.253510] hub 3-0:1.0: hub_resume [ 3.253559] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.253563] hub 3-0:1.0: hub_suspend [ 3.253580] usb usb3: bus auto-suspend, wakeup 1 [ 3.253595] usb usb3: suspend raced with wakeup event [ 3.253596] usb usb3: usb auto-resume [ 3.269514] hub 3-0:1.0: hub_resume [ 3.269577] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.269581] hub 3-0:1.0: hub_suspend [ 3.269598] usb usb3: bus auto-suspend, wakeup 1 [ 3.277517] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 3.427504] usb 1-2: skipped 1 descriptor after interface [ 3.427842] usb 1-2: default language 0x0409 [ 3.429333] usb 1-2: udev 3, busnum 1, minor = 2 [ 3.429335] usb 1-2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 3.429337] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.429339] usb 1-2: Product: USB Optical Mouse [ 3.429342] usb 1-2: Manufacturer: Logitech [ 3.430683] usb 1-2: usb_probe_device [ 3.430685] usb 1-2: configuration #1 chosen from 1 choice [ 3.431706] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 3.434105] usb usb1-port4: status 0101, change 0000, 12 Mb/s [ 3.526249] usb 4-1-port2: status 0203 change 0011 [ 3.561519] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 3.629543] hub 4-1:1.0: state 7 ports 4 chg 0004 evt 0000 [ 3.629983] usb 4-1-port2: status 0203, change 0000, 10.0 Gb/s [ 3.709681] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd [ 3.711260] usb 1-4: udev 4, busnum 1, minor = 3 [ 3.711262] usb 1-4: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 3.711264] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.712477] usb 1-4: usb_probe_device [ 3.712479] usb 1-4: configuration #1 chosen from 1 choice [ 3.714759] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 3.716307] usb 1-4: adding 1-4:1.1 (config #1, interface 1) [ 3.719764] usb usb1-port5: status 0101, change 0000, 12 Mb/s [ 3.729928] usb 4-1.2: USB quirks for this device: 400 [ 3.730423] usb 4-1.2: skipped 1 descriptor after endpoint [ 3.730425] usb 4-1.2: skipped 1 descriptor after endpoint [ 3.730427] usb 4-1.2: skipped 1 descriptor after endpoint [ 3.730664] usb 4-1.2: skipped 3 descriptors after interface [ 3.730668] usb 4-1.2: skipped 1 descriptor after endpoint [ 3.730670] usb 4-1.2: skipped 1 descriptor after endpoint [ 3.730671] usb 4-1.2: skipped 1 descriptor after endpoint [ 3.730777] usb 4-1.2: default language 0x0409 [ 3.731140] usb 4-1.2: udev 3, busnum 4, minor = 386 [ 3.731141] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [ 3.731143] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 3.731145] usb 4-1.2: Product: USB 10/100/1000 LAN [ 3.731146] usb 4-1.2: Manufacturer: Realtek [ 3.731147] usb 4-1.2: SerialNumber: 001000001 [ 3.731500] usb 4-1.2: usb_probe_device [ 3.731502] usb 4-1.2: configuration #2 chosen from 2 choices [ 3.732787] usb 4-1.2: adding 4-1.2:2.0 (config #2, interface 0) [ 3.733099] usb 4-1.2: adding 4-1.2:2.1 (config #2, interface 1) [ 3.733363] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0004 [ 3.845498] usb 1-5: new high-speed USB device number 5 using xhci_hcd [ 3.997557] usb 1-5: default language 0x0409 [ 3.998253] usb 1-5: udev 5, busnum 1, minor = 4 [ 3.998255] usb 1-5: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03 [ 3.998257] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.998258] usb 1-5: Product: USB2.0 Hub [ 3.998259] usb 1-5: Manufacturer: VIA Labs, Inc. [ 4.000087] usb 1-5: usb_probe_device [ 4.000090] usb 1-5: configuration #1 chosen from 1 choice [ 4.001251] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 4.003369] hub 1-5:1.0: usb_probe_interface [ 4.003371] hub 1-5:1.0: usb_probe_interface - got id [ 4.003373] hub 1-5:1.0: USB hub found [ 4.003683] hub 1-5:1.0: 5 ports detected [ 4.003690] hub 1-5:1.0: compound device; port removable status: FFRRF [ 4.003692] hub 1-5:1.0: individual port power switching [ 4.003693] hub 1-5:1.0: individual port over-current protection [ 4.005191] hub 1-5:1.0: TT per port [ 4.005194] hub 1-5:1.0: TT requires at most 32 FS bit times (2664 ns) [ 4.005195] hub 1-5:1.0: Port indicators are supported [ 4.005196] hub 1-5:1.0: power on to power good time: 350ms [ 4.005647] hub 1-5:1.0: local power source is good [ 4.007148] hub 1-5:1.0: enabling power on all ports [ 4.129049] usb usb1-port7: status 0101, change 0000, 12 Mb/s [ 4.253617] usb 1-7: new full-speed USB device number 6 using xhci_hcd [ 4.402573] usb 1-7: skipped 1 descriptor after configuration [ 4.402576] usb 1-7: skipped 4 descriptors after interface [ 4.402718] usb 1-7: default language 0x0409 [ 4.403202] usb 1-7: udev 6, busnum 1, minor = 5 [ 4.403205] usb 1-7: New USB device found, idVendor=27c6, idProduct=5395, bcdDevice= 1.00 [ 4.403206] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.403208] usb 1-7: Product: Goodix Fingerprint Device [ 4.403209] usb 1-7: Manufacturer: HTMicroelectronics [ 4.403209] usb 1-7: SerialNumber: HTK32 [ 4.405035] usb 1-7: usb_probe_device [ 4.405037] usb 1-7: configuration #1 chosen from 1 choice [ 4.407631] usb 1-7: adding 1-7:1.0 (config #1, interface 0) [ 4.409249] usb 1-7: adding 1-7:1.1 (config #1, interface 1) [ 4.412970] usb usb1-port12: status 0101, change 0000, 12 Mb/s [ 4.485668] usb 1-5-port1: status 0101 change 0001 [ 4.537512] usb 1-12: new high-speed USB device number 7 using xhci_hcd [ 4.589834] hub 1-5:1.0: state 7 ports 5 chg 0002 evt 0000 [ 4.590360] usb 1-5-port1: status 0101, change 0000, 12 Mb/s [ 4.590580] usb 1-5-port1: indicator auto status 0 [ 4.700262] usb 1-12: skipped 2 descriptors after configuration [ 4.700265] usb 1-12: skipped 6 descriptors after interface [ 4.700269] usb 1-12: skipped 1 descriptor after endpoint [ 4.700270] usb 1-12: skipped 15 descriptors after interface [ 4.700507] usb 1-12: default language 0x0409 [ 4.702311] usb 1-12: udev 7, busnum 1, minor = 6 [ 4.702314] usb 1-12: New USB device found, idVendor=0c45, idProduct=6723, bcdDevice=80.08 [ 4.702316] usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 4.702317] usb 1-12: Product: Integrated_Webcam_HD [ 4.702318] usb 1-12: Manufacturer: CN09357G8LG0099PA1YKA01 [ 4.703749] usb 1-12: usb_probe_device [ 4.703751] usb 1-12: configuration #1 chosen from 1 choice [ 4.705110] usb 1-12: adding 1-12:1.0 (config #1, interface 0) [ 4.707983] usb 1-12: adding 1-12:1.1 (config #1, interface 1) [ 4.711299] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 0000 [ 4.723620] usbhid 1-1:1.0: usb_probe_interface [ 4.723623] usbhid 1-1:1.0: usb_probe_interface - got id [ 4.727225] usbhid 1-1:1.1: usb_probe_interface [ 4.727227] usbhid 1-1:1.1: usb_probe_interface - got id [ 4.734724] usbhid 1-2:1.0: usb_probe_interface [ 4.734726] usbhid 1-2:1.0: usb_probe_interface - got id [ 4.736361] usbcore: registered new interface driver usbhid [ 4.736363] usbhid: USB HID core driver [ 4.739891] input: Fujitsu Fujitsu Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0BF8:101E.0001/input/input3 [ 4.798162] hid-generic 0003:0BF8:101E.0001: input,hidraw0: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input0 [ 4.798505] input: Fujitsu Fujitsu Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0002/input/input4 [ 4.817513] usb 1-5.1: new full-speed USB device number 8 using xhci_hcd [ 4.857760] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0002/input/input5 [ 4.857774] usbhid 1-1:1.1: looking for a minor, starting at 0 [ 4.858215] hid-generic 0003:0BF8:101E.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input1 [ 4.858509] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C077.0003/input/input6 [ 4.858797] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 4.968380] usb 1-5.1: skipped 1 descriptor after interface [ 4.968844] usb 1-5.1: default language 0x0409 [ 4.972179] usb 1-5.1: udev 8, busnum 1, minor = 7 [ 4.972181] usb 1-5.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06 [ 4.972183] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.972184] usb 1-5.1: Product: DELL DA300 [ 4.972186] usb 1-5.1: Manufacturer: Bizlink [ 4.972186] usb 1-5.1: SerialNumber: MCU Ver0006 [ 4.972598] usb 1-5.1: usb_probe_device [ 4.972600] usb 1-5.1: configuration #1 chosen from 1 choice [ 4.980076] usb 1-5.1: adding 1-5.1:1.0 (config #1, interface 0) [ 4.980840] usbhid 1-5.1:1.0: usb_probe_interface [ 4.980863] usbhid 1-5.1:1.0: usb_probe_interface - got id [ 4.983292] usbhid 1-5.1:1.0: looking for a minor, starting at 0 [ 4.983700] hid-generic 0003:06C4:C412.0004: hiddev1,hidraw3: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:00:14.0-5.1/input0 [ 5.082580] systemd-hibernate-resume-generator[546]: Reported hibernation image: ID=debian kernel=6.8.0-rc2+ UUID=fa9c13bb-d49c-464f-8922-db493a3fc0ad offset=0 [ 11.268093] EXT4-fs (dm-0): mounted filesystem 9fa41e21-7a5f-479e-afdc-9a5503368d8e ro with ordered data mode. Quota mode: none. [ 11.768418] systemd-journald[261]: Received SIGTERM from PID 1 (systemd). [ 12.335917] systemd[1]: systemd 255.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 12.335953] systemd[1]: Detected architecture x86-64. [ 12.337186] systemd[1]: Hostname set to <villette>. [ 13.054036] systemd[1]: initrd-switch-root.service: Deactivated successfully. [ 13.054213] systemd[1]: Stopped initrd-switch-root.service - Switch Root. [ 13.055473] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 13.056185] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 13.056833] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 13.057634] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 13.058213] systemd[1]: Created slice user.slice - User and Session Slice. [ 13.058326] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 13.058415] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 13.058740] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 13.058757] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4... [ 13.058763] systemd[1]: Expecting device dev-disk-by\x2duuid-A209\x2d8973.device - /dev/disk/by-uuid/A209-8973... [ 13.058770] systemd[1]: Expecting device dev-nvme0n1p2.device - /dev/nvme0n1p2... [ 13.058788] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 13.058804] systemd[1]: Stopped target initrd-switch-root.target - Switch Root. [ 13.058815] systemd[1]: Stopped target initrd-fs.target - Initrd File Systems. [ 13.058822] systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System. [ 13.058833] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 13.058851] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 13.058862] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 13.058871] systemd[1]: Reached target slices.target - Slice Units. [ 13.058893] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 13.060228] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 13.060395] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 13.060488] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 13.060537] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 13.061188] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 13.061364] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 13.093640] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 13.095834] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 13.098172] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 13.100803] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 13.102958] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 13.104893] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 13.107699] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 13.110678] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 13.113420] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 13.116696] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 13.119846] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 13.122394] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 13.122524] systemd[1]: systemd-cryptsetup@luks\x2d4fd31592\x2d13c6\x2d4b2d\x2d9bc1\x2d247630daddc5.service: Deactivated successfully. [ 13.122699] systemd[1]: Stopped systemd-cryptsetup@luks\x2d4fd31592\x2d13c6\x2d4b2d\x2d9bc1\x2d247630daddc5.service. [ 13.122787] systemd[1]: systemd-cryptsetup@luks\x2d4fd31592\x2d13c6\x2d4b2d\x2d9bc1\x2d247630daddc5.service: Consumed 7.800s CPU time. [ 13.128947] systemd[1]: Starting systemd-journald.service - Journal Service... [ 13.130367] pstore: Using crash dump compression: deflate [ 13.140012] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 13.140068] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 13.153126] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 13.157586] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 13.175583] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 13.191571] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 13.192962] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 13.194700] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 13.196057] fuse: init (API version 7.39) [ 13.196446] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 13.199524] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 13.202647] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 13.206110] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 13.207465] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 13.210186] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 13.211332] pstore: Registered efi_pstore as persistent store backend [ 13.211408] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 13.212101] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 13.212386] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 13.213066] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 13.213392] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 13.214030] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 13.214303] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 13.216378] loop: module loaded [ 13.217019] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 13.219647] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 13.223588] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 13.224794] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 13.225183] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 13.225317] systemd-journald[813]: Collecting audit messages is disabled. [ 13.226684] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 13.228467] lp: driver loaded but no devices found [ 13.233988] ppdev: user-space parallel port driver [ 13.234100] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 13.234456] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 13.237762] systemd[1]: Started systemd-journald.service - Journal Service. [ 13.253774] EXT4-fs (dm-0): re-mounted 9fa41e21-7a5f-479e-afdc-9a5503368d8e r/w. Quota mode: none. [ 13.482391] systemd-journald[813]: Received client request to flush runtime journal. [ 13.498458] systemd-journald[813]: /var/log/journal/a4f788b95908457da583ab45499cddcd/system.journal: Journal file uses a different sequence number ID, rotating. [ 13.498466] systemd-journald[813]: Rotating system journal. [ 13.715332] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7 [ 13.739601] ACPI: button: Lid Switch [LID0] [ 13.747217] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8 [ 13.749481] usb 1-7: usb auto-suspend, wakeup 0 [ 13.750075] input: Intel HID events as /devices/platform/INT33D5:00/input/input9 [ 13.751274] ACPI: AC: AC Adapter [AC] (off-line) [ 13.759502] ACPI: button: Power Button [PBTN] [ 13.759948] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10 [ 13.763396] ACPI: button: Sleep Button [SBTN] [ 13.763541] intel-hid INT33D5:00: platform supports 5 button array [ 13.763884] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input11 [ 13.805861] mc: Linux media interface: v0.10 [ 13.814858] wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found [ 13.820353] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS [ 13.820705] Consider using thermal netlink events interface [ 13.857553] usb 1-7: usb auto-resume [ 13.858025] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 0080 [ 13.868044] ACPI: bus type thunderbolt registered [ 13.902018] EXT4-fs (nvme0n1p2): mounted filesystem ba1599a4-e271-4bcc-9e43-437c06776c27 r/w with ordered data mode. Quota mode: none. [ 13.925511] usb 1-7: finish resume [ 13.925694] cdc_acm 1-7:1.0: usb_probe_interface [ 13.925697] cdc_acm 1-7:1.0: usb_probe_interface - got id [ 13.925726] cdc_acm 1-7:1.1: usb_probe_interface [ 13.925728] cdc_acm 1-7:1.1: usb_probe_interface - got id [ 13.925739] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 0000 [ 13.925814] usbcore: registered new interface driver cdc_acm [ 13.925815] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.522057] ACPI: battery: Slot [BAT0] (battery present) [ 14.642223] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 14.646388] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 14.650849] usbcore: registered new device driver r8152-cfgselector [ 14.650877] usb 4-1.2: unregistering interface 4-1.2:2.0 [ 14.651071] usb 4-1.2: unregistering interface 4-1.2:2.1 [ 14.651388] usb 4-1.2: usb_disable_device nuking non-ep0 URBs [ 14.651985] r8152-cfgselector 4-1.2: usb_probe_device [ 14.653980] r8152-cfgselector 4-1.2: adding 4-1.2:1.0 (config #1, interface 0) [ 14.654583] r8152 4-1.2:1.0: usb_probe_interface [ 14.654587] r8152 4-1.2:1.0: usb_probe_interface - got id [ 14.657188] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 14.658221] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 14.658314] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 14.659547] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 14.736353] Bluetooth: Core ver 2.22 [ 14.736405] NET: Registered PF_BLUETOOTH protocol family [ 14.736406] Bluetooth: HCI device and connection manager initialized [ 14.736412] Bluetooth: HCI socket layer initialized [ 14.736417] Bluetooth: L2CAP socket layer initialized [ 14.736446] Bluetooth: SCO socket layer initialized [ 14.738028] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd [ 14.758190] r8152-cfgselector 4-1.2: USB quirks for this device: 400 [ 14.761972] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.762772] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.763464] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 14.766598] r8152 4-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 34:48:ed:7e:7c:11 [ 14.770424] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 14.791319] r8152 4-1.2:1.0: load rtl8153b-2 v2 04/27/23 successfully [ 14.828960] r8152 4-1.2:1.0 eth0: v1.12.13 [ 14.829178] usbcore: registered new interface driver r8152 [ 15.461469] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4646] [ 15.496895] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..] [ 15.496949] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. [ 15.554745] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3125, fw id: 2378871 [ 15.590681] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13 [ 15.851164] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 15.851732] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 16.005104] usbcore: registered new interface driver cdc_ether [ 16.005244] videodev: Linux video capture interface: v2.00 [ 16.015603] usbcore: registered new interface driver r8153_ecm [ 16.015863] Intel(R) Wireless WiFi driver for Linux [ 16.016257] iwlwifi 0000:3b:00.0: enabling device (0000 -> 0002) [ 16.017846] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 16.017849] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 16.017850] RAPL PMU: hw unit of domain package 2^-14 Joules [ 16.017851] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 16.017852] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 16.017853] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 16.027975] btusb 1-4:1.0: usb_probe_interface [ 16.027979] btusb 1-4:1.0: usb_probe_interface - got id [ 16.029350] usbcore: registered new interface driver btusb [ 16.030028] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 16.031029] Bluetooth: hci0: Device revision is 1 [ 16.031031] Bluetooth: hci0: Secure boot is enabled [ 16.031032] Bluetooth: hci0: OTP lock is enabled [ 16.031033] Bluetooth: hci0: API lock is enabled [ 16.031034] Bluetooth: hci0: Debug lock is disabled [ 16.031035] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 16.034066] iwlwifi 0000:3b:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000 [ 16.034236] iwlwifi 0000:3b:00.0: PCI dev 2723/1654, rev=0x340, rfid=0x10a100 [ 16.038851] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 16.038911] Bluetooth: hci0: Boot Address: 0x24800 [ 16.038913] Bluetooth: hci0: Firmware Version: 255-255.255 [ 16.043293] iwlwifi 0000:3b:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37 [ 16.044358] iwlwifi 0000:3b:00.0: loaded firmware version 77.ad46c98b.0 cc-a0-77.ucode op_mode iwlmvm [ 16.210302] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 16.211759] input: WCOM490B:00 056A:490B Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input14 [ 16.212311] input: WCOM490B:00 056A:490B as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input15 [ 16.212566] input: WCOM490B:00 056A:490B Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input16 [ 16.212915] input: WCOM490B:00 056A:490B as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input17 [ 16.213249] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 16.213283] input: WCOM490B:00 056A:490B Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input18 [ 16.213831] hid-generic 0018:056A:490B.0005: input,hidraw4: I2C HID v1.00 Mouse [WCOM490B:00 056A:490B] on i2c-WCOM490B:00 [ 16.445473] usb 1-7: usb auto-suspend, wakeup 0 [ 16.865473] audit: type=1400 audit(1709304091.041:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1011 comm="apparmor_parser" [ 16.865488] audit: type=1400 audit(1709304091.041:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1011 comm="apparmor_parser" [ 16.865493] audit: type=1400 audit(1709304091.041:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1022 comm="apparmor_parser" [ 16.865929] audit: type=1400 audit(1709304091.045:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=1018 comm="apparmor_parser" [ 16.867531] audit: type=1400 audit(1709304091.045:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1010 comm="apparmor_parser" [ 16.871921] audit: type=1400 audit(1709304091.049:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1019 comm="apparmor_parser" [ 16.872132] r8152 4-1.2:1.0 enx3448ed7e7c11: renamed from eth0 [ 16.872712] audit: type=1400 audit(1709304091.049:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1020 comm="apparmor_parser" [ 16.872912] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 16.874460] audit: type=1400 audit(1709304091.053:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1015 comm="apparmor_parser" [ 16.874465] audit: type=1400 audit(1709304091.053:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1015 comm="apparmor_parser" [ 16.874470] audit: type=1400 audit(1709304091.053:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1015 comm="apparmor_parser" [ 16.881519] input: SYNA2393:00 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0006/input/input19 [ 16.882222] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0006/input/input20 [ 16.882920] hid-generic 0018:06CB:7A13.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00 [ 16.959334] iTCO_vendor_support: vendor-support=0 [ 16.959430] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator [ 16.959640] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator [ 16.962926] intel_rapl_common: Found RAPL domain package [ 16.962929] intel_rapl_common: Found RAPL domain core [ 16.962931] intel_rapl_common: Found RAPL domain uncore [ 16.962932] intel_rapl_common: Found RAPL domain dram [ 16.962933] intel_rapl_common: Found RAPL domain psys [ 16.963360] input: Dell WMI hotkeys as /devices/platform/PNP0C14:05/wmi_bus/wmi_bus-PNP0C14:05/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input22 [ 16.978067] lis3lv02d: 8 bits 3DC sensor found [ 17.064649] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 17.073744] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23 [ 17.076752] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 17.079994] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.098913] uvcvideo 1-12:1.0: usb_probe_interface [ 17.098920] uvcvideo 1-12:1.0: usb_probe_interface - got id [ 17.099970] usb 1-12: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6723) [ 17.107020] usbcore: registered new interface driver uvcvideo [ 17.116749] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.116829] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 17.147150] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.244303] intel_rapl_common: Found RAPL domain package [ 17.244306] intel_rapl_common: Found RAPL domain dram [ 17.246233] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.298233] iwlwifi 0000:3b:00.0: Detected Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW), REV=0x340 [ 17.298650] thermal thermal_zone13: failed to read out thermal zone (-61) [ 17.335081] input: SYNA2393:00 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0006/input/input24 [ 17.354446] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0006/input/input25 [ 17.411075] hid-multitouch 0018:06CB:7A13.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00 [ 17.412620] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.445612] iwlwifi 0000:3b:00.0: Detected RF HR B3, rfid=0x10a100 [ 17.467349] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.516870] iwlwifi 0000:3b:00.0: base HW address: 24:41:8c:64:6c:4d [ 17.547170] iwlwifi 0000:3b:00.0 wlp59s0: renamed from wlan0 [ 17.853259] Bluetooth: hci0: Waiting for firmware download to complete [ 17.854009] Bluetooth: hci0: Firmware loaded in 1772613 usecs [ 17.854142] Bluetooth: hci0: Waiting for device to boot [ 17.869065] Bluetooth: hci0: Device booted in 14676 usecs [ 17.870146] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 17.872067] Bluetooth: hci0: Applying Intel DDC parameters completed [ 17.873053] Bluetooth: hci0: Firmware revision 0.3 build 144 week 11 2023 [ 17.875075] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 17.919401] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.920406] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040380 [ 17.924297] Console: switching to colour dummy device 80x25 [ 17.924359] i915 0000:00:02.0: vgaarb: deactivate vga console [ 17.956030] wacom 0018:056A:490B.0005: hidraw4: I2C HID v1.00 Mouse [WCOM490B:00 056A:490B] on i2c-WCOM490B:00 [ 17.956189] input: Wacom HID 490B Pen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input27 [ 17.956835] input: Wacom HID 490B Finger as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM490B:00/0018:056A:490B.0005/input/input28 [ 17.957319] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.966000] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.967920] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 17.969853] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 17.973268] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 17.976300] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040380 [ 19.392867] Process accounting resumed [ 19.460426] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.460433] Bluetooth: BNEP filters: protocol multicast [ 19.460449] Bluetooth: BNEP socket layer initialized [ 19.464832] Bluetooth: MGMT ver 1.22 [ 19.480138] NET: Registered PF_ALG protocol family [ 19.586425] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 19.629481] usb 1-12: usb auto-suspend, wakeup 0 [ 19.662458] NET: Registered PF_QIPCRTR protocol family [ 19.680131] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 19.690748] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 19.700002] i915 0000:00:02.0: [drm] [ENCODER:120:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it [ 19.762228] r8152 4-1.2:1.0 enx3448ed7e7c11: carrier on [ 19.967811] iwlwifi 0000:3b:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 20.113526] usb 1-4: usb auto-suspend, wakeup 0 [ 21.109081] PPP generic driver version 2.4.2 [ 21.110594] NET: Registered PF_PPPOX protocol family [ 21.122970] l2tp_core: L2TP core driver, V2.0 [ 21.125120] l2tp_netlink: L2TP netlink interface [ 21.127253] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 21.138062] Initializing XFRM netlink socket [ 21.146767] IPsec XFRM device driver [ 21.281642] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 [ 21.306195] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 21.310596] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input30 [ 21.313308] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 21.313344] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 21.313601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input31 [ 21.314989] i915 display info: display version: 9 [ 21.314992] i915 display info: cursor_needs_physical: no [ 21.314993] i915 display info: has_cdclk_crawl: no [ 21.314994] i915 display info: has_cdclk_squash: no [ 21.314996] i915 display info: has_ddi: yes [ 21.314997] i915 display info: has_dp_mst: yes [ 21.314998] i915 display info: has_dsb: no [ 21.314999] i915 display info: has_fpga_dbg: yes [ 21.315000] i915 display info: has_gmch: no [ 21.315001] i915 display info: has_hotplug: yes [ 21.315002] i915 display info: has_hti: no [ 21.315003] i915 display info: has_ipc: yes [ 21.315004] i915 display info: has_overlay: no [ 21.315004] i915 display info: has_psr: yes [ 21.315005] i915 display info: has_psr_hw_tracking: yes [ 21.315006] i915 display info: overlay_needs_physical: no [ 21.315007] i915 display info: supports_tv: no [ 21.315008] i915 display info: has_hdcp: yes [ 21.315009] i915 display info: has_dmc: yes [ 21.315010] i915 display info: has_dsc: no [ 21.379942] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 21.387268] fbcon: i915drmfb (fb0) is primary device [ 21.490422] Console: switching to colour frame buffer device 240x67 [ 21.528007] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 21.564945] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 21.564952] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.564955] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 21.564958] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 21.564960] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 21.564962] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18 [ 21.564964] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 21.564966] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 21.642964] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32 [ 21.643534] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33 [ 21.644108] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34 [ 21.644666] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35 [ 23.792083] Bluetooth: RFCOMM TTY layer initialized [ 23.792102] Bluetooth: RFCOMM socket layer initialized [ 23.792116] Bluetooth: RFCOMM ver 1.11 [ 23.829553] usb 1-12: usb auto-resume [ 23.829554] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 1000 [ 23.897501] usb 1-12: Waited 0ms for CONNECT [ 23.897505] usb 1-12: finish resume [ 23.898158] usb 1-12: disable remote wakeup, status -32 [ 24.676511] wlp59s0: authenticate with 6c:f3:7f:10:ae:1a (local address=24:41:8c:64:6c:4d) [ 24.677516] wlp59s0: send auth to 6c:f3:7f:10:ae:1a (try 1/3) [ 24.713102] wlp59s0: authenticated [ 24.713249] wlp59s0: VHT capa missing/short, disabling VHT/HE/EHT [ 24.713487] wlp59s0: associate with 6c:f3:7f:10:ae:1a (try 1/3) [ 24.724482] wlp59s0: RX AssocResp from 6c:f3:7f:10:ae:1a (capab=0x401 status=0 aid=4) [ 24.762325] wlp59s0: associated [ 26.421831] usb 1-12: usb auto-suspend, wakeup 0 [ 27.162330] usb 1-12: usb auto-resume [ 27.162685] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 1000 [ 27.230304] usb 1-12: Waited 0ms for CONNECT [ 27.230311] usb 1-12: finish resume [ 27.230909] usb 1-12: disable remote wakeup, status -32 [ 27.375647] rfkill: input handler disabled [ 29.753849] usb 1-12: usb auto-suspend, wakeup 0 [ 137.924765] wlp59s0: disconnect from AP 6c:f3:7f:10:ae:1a for new auth to 6c:f3:7f:10:a0:fa [ 138.034778] wlp59s0: authenticate with 6c:f3:7f:10:a0:fa (local address=24:41:8c:64:6c:4d) [ 138.036157] wlp59s0: send auth to 6c:f3:7f:10:a0:fa (try 1/3) [ 138.075176] wlp59s0: authenticated [ 138.075817] wlp59s0: VHT capa missing/short, disabling VHT/HE/EHT [ 138.077794] wlp59s0: associate with 6c:f3:7f:10:a0:fa (try 1/3) [ 138.085690] wlp59s0: RX ReassocResp from 6c:f3:7f:10:a0:fa (capab=0x401 status=0 aid=5) [ 138.125133] wlp59s0: associated [ 150.442950] systemd-journald[813]: /var/log/journal/a4f788b95908457da583ab45499cddcd/user-5272.journal: Journal file uses a different sequence number ID, rotating. [ 151.740093] rfkill: input handler enabled [ 154.397845] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 1000 [ 154.397915] usb 1-12: usb auto-resume [ 154.470091] usb 1-12: Waited 0ms for CONNECT [ 154.470104] usb 1-12: finish resume [ 154.471106] usb 1-12: disable remote wakeup, status -32 [ 155.980632] rfkill: input handler disabled [ 156.989815] usb 1-12: usb auto-suspend, wakeup 0 [ 162.026176] usb 1-4: usb auto-resume [ 162.026255] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 0010 [ 162.097803] usb 1-4: Waited 0ms for CONNECT [ 162.097817] usb 1-4: finish resume [ 162.149962] usb 1-7: usb auto-resume [ 162.150022] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 0080 [ 162.222095] usb 1-7: finish resume [ 162.233887] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 0000 [ 162.270219] usb 1-12: usb auto-resume [ 162.270220] hub 1-0:1.0: state 7 ports 16 chg 0000 evt 1000 [ 162.338095] usb 1-12: Waited 0ms for CONNECT [ 162.338108] usb 1-12: finish resume [ 162.339197] usb 1-12: disable remote wakeup, status -32 [ 162.342286] usb usb2: usb auto-resume [ 162.342331] hub 2-0:1.0: hub_resume [ 162.370517] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 162.371013] hub 2-0:1.0: hub_suspend [ 162.371021] usb usb2: bus auto-suspend, wakeup 1 [ 162.371258] usb usb3: usb auto-resume [ 162.371279] hub 3-0:1.0: hub_resume [ 162.371353] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 162.371408] hub 3-0:1.0: hub_suspend [ 162.371415] usb usb3: bus auto-suspend, wakeup 1 [ 164.385863] usb 1-7: usb auto-suspend, wakeup 0 [ 164.618146] usb 1-4: usb auto-suspend, wakeup 0 [ 164.862048] usb 1-12: usb auto-suspend, wakeup 0 [ 173.240535] wlp59s0: disconnect from AP 6c:f3:7f:10:a0:fa for new auth to 6c:f3:7f:10:ae:1a [ 173.358989] wlp59s0: authenticate with 6c:f3:7f:10:ae:1a (local address=24:41:8c:64:6c:4d) [ 173.359898] wlp59s0: send auth to 6c:f3:7f:10:ae:1a (try 1/3) [ 173.395256] wlp59s0: authenticated [ 173.395479] wlp59s0: VHT capa missing/short, disabling VHT/HE/EHT [ 173.397848] wlp59s0: associate with 6c:f3:7f:10:ae:1a (try 1/3) [ 173.406623] wlp59s0: RX ReassocResp from 6c:f3:7f:10:ae:1a (capab=0x401 status=0 aid=4) [ 173.448160] wlp59s0: associated
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index c628c1abc907..4d63496f98b6 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -573,7 +573,7 @@ static int match_location(struct usb_device *peer_hdev, void *p) struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent); - if (!peer_hub) + if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED) return 0; hcd = bus_to_hcd(hdev->bus); @@ -584,7 +584,8 @@ static int match_location(struct usb_device *peer_hdev, void *p) for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { peer = peer_hub->ports[port1 - 1]; - if (peer && peer->location == port_dev->location) { + if (peer && peer->connect_type != USB_PORT_NOT_USED && + peer->location == port_dev->location) { link_peers_report(port_dev, peer); return 1; /* done */ }
Unused USB ports may have bogus location data in ACPI PLD tables. This causes port peering failures as these unused USB2 and USB3 ports location may match. Due to these failures the driver prints a "usb: port power management may be unreliable" warning, and unnecessarily blocks port power off during runtime suspend. This was debugged on a couple DELL systems where the unused ports all returned zeroes in their location data. Similar bugreports exist for other systems. Don't try to peer or match ports that have connect type set to USB_PORT_NOT_USED. Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- v1 -> v2 - Improve commit message - Add missing Fixes, Closes and Link tags - send this patch separately for easier picking to usb-linus drivers/usb/core/port.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)