Message ID | 20240301221641.159542-7-paweldembicki@gmail.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | net: dsa: vsc73xx: Make vsc73xx usable | expand |
On Fri, Mar 1, 2024 at 11:17 PM Pawel Dembicki <paweldembicki@gmail.com> wrote: > This isn't a fully functional implementation of 802.1D, but > port_stp_state_set is required for a future tag8021q operations. > > This implementation handles properly all states, but vsc73xx doesn't > forward STP packets. > > Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> This looks like the best effort to me. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On 3/1/24 14:16, Pawel Dembicki wrote: > This isn't a fully functional implementation of 802.1D, but > port_stp_state_set is required for a future tag8021q operations. > > This implementation handles properly all states, but vsc73xx doesn't > forward STP packets. > > Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
On Fri, Mar 01, 2024 at 11:16:28PM +0100, Pawel Dembicki wrote: > This isn't a fully functional implementation of 802.1D, but > port_stp_state_set is required for a future tag8021q operations. > > This implementation handles properly all states, but vsc73xx doesn't > forward STP packets. > > Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> > --- > v6: > - fix inconsistent indenting > v5: > - remove unneeded 'RECVMASK' operations > - reorganise vsc73xx_refresh_fwd_map function > v4: > - fully reworked port_stp_state_set > v3: > - use 'VSC73XX_MAX_NUM_PORTS' define > - add 'state == BR_STATE_DISABLED' condition > - fix style issues > v2: > - fix kdoc > > drivers/net/dsa/vitesse-vsc73xx-core.c | 99 +++++++++++++++++++++++--- > 1 file changed, 88 insertions(+), 11 deletions(-) > > diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c > index 425999d7bf41..d1e84a9a83d1 100644 > --- a/drivers/net/dsa/vitesse-vsc73xx-core.c > +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c > @@ -1036,6 +1029,89 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port, > config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000; > } > > +static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state) > +{ > + struct dsa_port *other_dp, *dp = dsa_to_port(ds, port); > + struct vsc73xx *vsc = ds->priv; > + u16 mask; > + > + if (state != BR_STATE_FORWARDING) { > + /* Ports that aren't in the forwarding state must not > + * forward packets anywhere. > + */ > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, > + VSC73XX_SRCMASKS + port, > + VSC73XX_SRCMASKS_PORTS_MASK, 0); > + > + dsa_switch_for_each_available_port(other_dp, ds) { > + if (other_dp == dp) > + continue; > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, > + VSC73XX_SRCMASKS + other_dp->index, > + BIT(port), 0); > + } > + > + return; > + } > + > + /* Forwarding ports must forward to the CPU and to other ports > + * in the same bridge > + */ > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, > + VSC73XX_SRCMASKS + CPU_PORT, BIT(port), BIT(port)); > + > + mask = BIT(CPU_PORT); > + > + if (dp->bridge) { > + dsa_switch_for_each_user_port(other_dp, ds) { > + if (other_dp->bridge == dp->bridge && You could use dsa_port_bridge_same(dp, other_dp) and that could eliminate the extra "if (dp->bridge)" condition, because it explicitly makes standalone ports isolated from other standalone ports. > + other_dp->index != port && You could move the "int other_port" definition to dsa_switch_for_each_user_port() scope, and thus reuse it here. > + other_dp->stp_state == BR_STATE_FORWARDING) { You could "continue" on the negated condition, and reduce the indentation one level further. > + int other_port = other_dp->index; > + > + mask |= BIT(other_port); > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, > + 0, > + VSC73XX_SRCMASKS + > + other_port, > + BIT(port), BIT(port)); > + } > + } > + } All in all, I would have written this as: dsa_switch_for_each_user_port(other_dp, ds) { int other_port = other_dp->index; if (port == other_port || !dsa_port_bridge_same(dp, other_dp) || other_dp->stp_state != BR_STATE_FORWARDING) continue; mask |= BIT(other_port); vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_SRCMASKS + other_port, BIT(port), BIT(port)); } Anyway this does not affect functionality, and it is up to you if you integrate these suggestions or not. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> > + > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, > + VSC73XX_SRCMASKS + port, > + VSC73XX_SRCMASKS_PORTS_MASK, mask); > +}
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index 425999d7bf41..d1e84a9a83d1 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -164,6 +164,10 @@ #define VSC73XX_AGENCTRL 0xf0 #define VSC73XX_CAPRST 0xff +#define VSC73XX_SRCMASKS_CPU_COPY BIT(27) +#define VSC73XX_SRCMASKS_MIRROR BIT(26) +#define VSC73XX_SRCMASKS_PORTS_MASK GENMASK(7, 0) + #define VSC73XX_MACACCESS_CPU_COPY BIT(14) #define VSC73XX_MACACCESS_FWD_KILL BIT(13) #define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12) @@ -623,9 +627,6 @@ static int vsc73xx_setup(struct dsa_switch *ds) vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY, VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS | VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS); - /* Enable reception of frames on all ports */ - vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK, - 0x5f); /* IP multicast flood mask (table 144) */ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK, 0xff); @@ -785,10 +786,6 @@ static void vsc73xx_phylink_mac_link_down(struct dsa_switch *ds, int port, /* Allow backward dropping of frames from this port */ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, VSC73XX_SBACKWDROP, BIT(port), BIT(port)); - - /* Receive mask (disable forwarding) */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, - VSC73XX_RECVMASK, BIT(port), 0); } static void vsc73xx_phylink_mac_link_up(struct dsa_switch *ds, int port, @@ -841,10 +838,6 @@ static void vsc73xx_phylink_mac_link_up(struct dsa_switch *ds, int port, vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, VSC73XX_ARBDISC, BIT(port), 0); - /* Enable port (forwarding) in the receieve mask */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, - VSC73XX_RECVMASK, BIT(port), BIT(port)); - /* Disallow backward dropping of frames from this port */ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, VSC73XX_SBACKWDROP, BIT(port), 0); @@ -1036,6 +1029,89 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port, config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000; } +static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state) +{ + struct dsa_port *other_dp, *dp = dsa_to_port(ds, port); + struct vsc73xx *vsc = ds->priv; + u16 mask; + + if (state != BR_STATE_FORWARDING) { + /* Ports that aren't in the forwarding state must not + * forward packets anywhere. + */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + port, + VSC73XX_SRCMASKS_PORTS_MASK, 0); + + dsa_switch_for_each_available_port(other_dp, ds) { + if (other_dp == dp) + continue; + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + other_dp->index, + BIT(port), 0); + } + + return; + } + + /* Forwarding ports must forward to the CPU and to other ports + * in the same bridge + */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + CPU_PORT, BIT(port), BIT(port)); + + mask = BIT(CPU_PORT); + + if (dp->bridge) { + dsa_switch_for_each_user_port(other_dp, ds) { + if (other_dp->bridge == dp->bridge && + other_dp->index != port && + other_dp->stp_state == BR_STATE_FORWARDING) { + int other_port = other_dp->index; + + mask |= BIT(other_port); + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, + 0, + VSC73XX_SRCMASKS + + other_port, + BIT(port), BIT(port)); + } + } + } + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + port, + VSC73XX_SRCMASKS_PORTS_MASK, mask); +} + +/* FIXME: STP frames aren't forwarded at this moment. BPDU frames are + * forwarded only from and to PI/SI interface. For more info see chapter + * 2.7.1 (CPU Forwarding) in datasheet. + * This function is required for tag_8021q operations. + */ +static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct vsc73xx *vsc = ds->priv; + u32 val; + + val = (state == BR_STATE_BLOCKING || state == BR_STATE_DISABLED) ? + 0 : BIT(port); + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_RECVMASK, BIT(port), val); + + val = (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING) ? + BIT(port) : 0; + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_LEARNMASK, BIT(port), val); + + /* CPU Port should always forward packets when user ports are forwarding + * so let's configure it from other ports only. + */ + if (port != CPU_PORT) + vsc73xx_refresh_fwd_map(ds, port, state); +} + static const struct dsa_switch_ops vsc73xx_ds_ops = { .get_tag_protocol = vsc73xx_get_tag_protocol, .setup = vsc73xx_setup, @@ -1051,6 +1127,7 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = { .port_disable = vsc73xx_port_disable, .port_change_mtu = vsc73xx_change_mtu, .port_max_mtu = vsc73xx_get_max_mtu, + .port_stp_state_set = vsc73xx_port_stp_state_set, .phylink_get_caps = vsc73xx_phylink_get_caps, };
This isn't a fully functional implementation of 802.1D, but port_stp_state_set is required for a future tag8021q operations. This implementation handles properly all states, but vsc73xx doesn't forward STP packets. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> --- v6: - fix inconsistent indenting v5: - remove unneeded 'RECVMASK' operations - reorganise vsc73xx_refresh_fwd_map function v4: - fully reworked port_stp_state_set v3: - use 'VSC73XX_MAX_NUM_PORTS' define - add 'state == BR_STATE_DISABLED' condition - fix style issues v2: - fix kdoc drivers/net/dsa/vitesse-vsc73xx-core.c | 99 +++++++++++++++++++++++--- 1 file changed, 88 insertions(+), 11 deletions(-)