diff mbox series

[2/2] arm64: dts: qcom: pm6150l: add Light Pulse Generator device node

Message ID 20240306172710.59780-3-danila@jiaxyga.com (mailing list archive)
State Accepted
Commit 11525960fcf40fcb772b62dd5117c59fdc27eb57
Headers show
Series Add LPG/PWM support for PM6150L PMIC | expand

Commit Message

Danila Tikhonov March 6, 2024, 5:27 p.m. UTC 
Add device node defining LPG/PWM block on PM6150L PMIC chip.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 arch/arm64/boot/dts/qcom/pm6150l.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Dmitry Baryshkov March 6, 2024, 7:50 p.m. UTC | #1 
On Wed, 6 Mar 2024 at 19:49, Danila Tikhonov <danila@jiaxyga.com> wrote:
>
> Add device node defining LPG/PWM block on PM6150L PMIC chip.
>
> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
> ---
>  arch/arm64/boot/dts/qcom/pm6150l.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index d13a1ab7c20b..0fce45276e5c 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -118,6 +118,16 @@  pm6150l_flash: led-controller@d300 {
 			status = "disabled";
 		};
 
+		pm6150l_lpg: pwm {
+			compatible = "qcom,pm6150l-lpg", "qcom,pm8150l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pm6150l_wled: leds@d800 {
 			compatible = "qcom,pm6150l-wled";
 			reg = <0xd800>, <0xd900>;