| Message ID | 20240222082142.3663983-1-anshuman.khandual@arm.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | coresight: Move remaining AMBA ACPI devices into platform driver | expand |
On 22/02/2024 08:21, Anshuman Khandual wrote: > This moves remaining AMBA ACPI devices into respective platform drivers for > enabling ACPI based power management support. This series applies on kernel > v6.8-rc5 release. This series has been built, and boot tested on a DT based > (RB5) and ACPI supported coresight platform (N1SDP). Please rebase your series on coresight next and fix build failures with the extra warnings turned ON (should be on by default with next). Suzuki > > https://git.gitlab.arm.com/linux-arm/linux-anshuman.git (amba_other_acpi_migration_v5) > > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Suzuki K Poulose <suzuki.poulose@arm.com> > Cc: Mike Leach <mike.leach@linaro.org> > Cc: James Clark <james.clark@arm.com> > Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> > Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> > Cc: linux-acpi@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Cc: coresight@lists.linaro.org > Cc: linux-stm32@st-md-mailman.stormreply.com > > Changes in V5: > > - Used table->mask to filter out bits from pid in coresight_get_uci_data_from_amba() > - Dropped custom masks such as STM_AMBA_MASK and TMC_AMBA_MASK > - Modified tmc_etr_setup_caps() to accept struct csdev_access argument > - Reverted back tmc_etr_setup_caps() call site position in tmc_probe() > - Changed replicator and funnel devices to use the new helpers earlier in series > - Updated the commit messages regarding xxx_probe() refactoring and renaming > > Changes in V4: > > https://lore.kernel.org/all/20240123054608.1790189-1-anshuman.khandual@arm.com/ > > - Fixed PM imbalance in etm4_probe() error path with pm_runtime_disable() > - Restored back the pm_runtime_disable() on platform probe error paths > in replicator, funnel, catu, tpiu, tmc and stm devices > - Dropped dev_caps argument from __tmc_probe() > - Changed xxxx_platform_remove() for platform_driver->remove_new() callback > > Changes in V3: > > https://lore.kernel.org/all/20231208053939.42901-1-anshuman.khandual@arm.com/ > > - Split coresight_init_driver/remove_driver() helpers into a separate patch > - Added 'drvdata->pclk' comments in replicator, funnel, tpiu, tmc, and stm devices > - Updated funnel, and replicator drivers to use these new helpers > - Check for drvdata instead of drvdata->pclk in suspend and resume paths in catu, > tmc and debug devices > - Added patch to extract device name from AMBA pid based table lookup for stm > - Added patch to extract device properties from AMBA pid based table look for tmc > - Dropped pm_runtime_put() from common __probe() functions > - Handled pm_runtime_put() in AMBA driver in success path > - Handled pm_runtime_put() in platform driver in both success and error paths > > Changes in V2: > > https://lore.kernel.org/all/20231201062053.1268492-1-anshuman.khandual@arm.com/ > > - Dropped redundant devm_ioremap_resource() hunk from tmc_platform_probe() > - Defined coresight_[init|remove]_driver() for both AMBA/platform drivers > - Changed catu, tmc, tpiu, stm and debug coresight drivers to use the new > helpers avoiding build issues arising from module_amba_driver(), and > module_platform_driver() being on the same file > > Changes in V1: > > https://lore.kernel.org/all/20231027072943.3418997-1-anshuman.khandual@arm.com/ > > - Replaced all IS_ERR() instances with IS_ERR_OR_NULL() as per Suzuki > > Changes in RFC: > > https://lore.kernel.org/all/20230921042040.1334641-1-anshuman.khandual@arm.com/ > > Anshuman Khandual (11): > coresight: etm4x: Fix unbalanced pm_runtime_enable() > coresight: stm: Extract device name from AMBA pid based table lookup > coresight: tmc: Extract device properties from AMBA pid based table lookup > coresight: Add helpers registering/removing both AMBA and platform drivers > coresight: replicator: Move ACPI support from AMBA driver to platform driver > coresight: funnel: Move ACPI support from AMBA driver to platform driver > coresight: catu: Move ACPI support from AMBA driver to platform driver > coresight: tpiu: Move ACPI support from AMBA driver to platform driver > coresight: tmc: Move ACPI support from AMBA driver to platform driver > coresight: stm: Move ACPI support from AMBA driver to platform driver > coresight: debug: Move ACPI support from AMBA driver to platform driver > > drivers/acpi/arm64/amba.c | 8 - > drivers/hwtracing/coresight/coresight-catu.c | 142 +++++++++++++--- > drivers/hwtracing/coresight/coresight-catu.h | 1 + > drivers/hwtracing/coresight/coresight-core.c | 29 ++++ > .../hwtracing/coresight/coresight-cpu-debug.c | 141 ++++++++++++++-- > .../coresight/coresight-etm4x-core.c | 3 + > .../hwtracing/coresight/coresight-funnel.c | 86 +++++----- > drivers/hwtracing/coresight/coresight-priv.h | 10 ++ > .../coresight/coresight-replicator.c | 81 +++++----- > drivers/hwtracing/coresight/coresight-stm.c | 115 +++++++++++-- > .../hwtracing/coresight/coresight-tmc-core.c | 153 +++++++++++++++--- > drivers/hwtracing/coresight/coresight-tmc.h | 2 + > drivers/hwtracing/coresight/coresight-tpiu.c | 102 ++++++++++-- > include/linux/coresight.h | 7 + > 14 files changed, 721 insertions(+), 159 deletions(-) >
On 3/5/24 23:55, Suzuki K Poulose wrote: > On 22/02/2024 08:21, Anshuman Khandual wrote: >> This moves remaining AMBA ACPI devices into respective platform drivers for >> enabling ACPI based power management support. This series applies on kernel >> v6.8-rc5 release. This series has been built, and boot tested on a DT based >> (RB5) and ACPI supported coresight platform (N1SDP). > > Please rebase your series on coresight next and fix build failures with the extra warnings turned ON (should be on by default with next). I did rebase the series (which required some rebase related changes for some) on coresight next i.e with the following commit as HEAD. a4f3057d19ff ("coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits") Although did not see any warning either with = m or = y based coresight options. Is there any other particular config which needs to be enabled for these warnings to come up ? > > > Suzuki > >> >> https://git.gitlab.arm.com/linux-arm/linux-anshuman.git (amba_other_acpi_migration_v5) >> >> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> >> Cc: Sudeep Holla <sudeep.holla@arm.com> >> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> >> Cc: Mike Leach <mike.leach@linaro.org> >> Cc: James Clark <james.clark@arm.com> >> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> >> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> >> Cc: linux-acpi@vger.kernel.org >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: linux-kernel@vger.kernel.org >> Cc: coresight@lists.linaro.org >> Cc: linux-stm32@st-md-mailman.stormreply.com >> >> Changes in V5: >> >> - Used table->mask to filter out bits from pid in coresight_get_uci_data_from_amba() >> - Dropped custom masks such as STM_AMBA_MASK and TMC_AMBA_MASK >> - Modified tmc_etr_setup_caps() to accept struct csdev_access argument >> - Reverted back tmc_etr_setup_caps() call site position in tmc_probe() >> - Changed replicator and funnel devices to use the new helpers earlier in series >> - Updated the commit messages regarding xxx_probe() refactoring and renaming >> >> Changes in V4: >> >> https://lore.kernel.org/all/20240123054608.1790189-1-anshuman.khandual@arm.com/ >> >> - Fixed PM imbalance in etm4_probe() error path with pm_runtime_disable() >> - Restored back the pm_runtime_disable() on platform probe error paths >> in replicator, funnel, catu, tpiu, tmc and stm devices >> - Dropped dev_caps argument from __tmc_probe() >> - Changed xxxx_platform_remove() for platform_driver->remove_new() callback >> >> Changes in V3: >> >> https://lore.kernel.org/all/20231208053939.42901-1-anshuman.khandual@arm.com/ >> >> - Split coresight_init_driver/remove_driver() helpers into a separate patch >> - Added 'drvdata->pclk' comments in replicator, funnel, tpiu, tmc, and stm devices >> - Updated funnel, and replicator drivers to use these new helpers >> - Check for drvdata instead of drvdata->pclk in suspend and resume paths in catu, >> tmc and debug devices >> - Added patch to extract device name from AMBA pid based table lookup for stm >> - Added patch to extract device properties from AMBA pid based table look for tmc >> - Dropped pm_runtime_put() from common __probe() functions >> - Handled pm_runtime_put() in AMBA driver in success path >> - Handled pm_runtime_put() in platform driver in both success and error paths >> >> Changes in V2: >> >> https://lore.kernel.org/all/20231201062053.1268492-1-anshuman.khandual@arm.com/ >> >> - Dropped redundant devm_ioremap_resource() hunk from tmc_platform_probe() >> - Defined coresight_[init|remove]_driver() for both AMBA/platform drivers >> - Changed catu, tmc, tpiu, stm and debug coresight drivers to use the new >> helpers avoiding build issues arising from module_amba_driver(), and >> module_platform_driver() being on the same file >> >> Changes in V1: >> >> https://lore.kernel.org/all/20231027072943.3418997-1-anshuman.khandual@arm.com/ >> >> - Replaced all IS_ERR() instances with IS_ERR_OR_NULL() as per Suzuki >> >> Changes in RFC: >> >> https://lore.kernel.org/all/20230921042040.1334641-1-anshuman.khandual@arm.com/ >> >> Anshuman Khandual (11): >> coresight: etm4x: Fix unbalanced pm_runtime_enable() >> coresight: stm: Extract device name from AMBA pid based table lookup >> coresight: tmc: Extract device properties from AMBA pid based table lookup >> coresight: Add helpers registering/removing both AMBA and platform drivers >> coresight: replicator: Move ACPI support from AMBA driver to platform driver >> coresight: funnel: Move ACPI support from AMBA driver to platform driver >> coresight: catu: Move ACPI support from AMBA driver to platform driver >> coresight: tpiu: Move ACPI support from AMBA driver to platform driver >> coresight: tmc: Move ACPI support from AMBA driver to platform driver >> coresight: stm: Move ACPI support from AMBA driver to platform driver >> coresight: debug: Move ACPI support from AMBA driver to platform driver >> >> drivers/acpi/arm64/amba.c | 8 - >> drivers/hwtracing/coresight/coresight-catu.c | 142 +++++++++++++--- >> drivers/hwtracing/coresight/coresight-catu.h | 1 + >> drivers/hwtracing/coresight/coresight-core.c | 29 ++++ >> .../hwtracing/coresight/coresight-cpu-debug.c | 141 ++++++++++++++-- >> .../coresight/coresight-etm4x-core.c | 3 + >> .../hwtracing/coresight/coresight-funnel.c | 86 +++++----- >> drivers/hwtracing/coresight/coresight-priv.h | 10 ++ >> .../coresight/coresight-replicator.c | 81 +++++----- >> drivers/hwtracing/coresight/coresight-stm.c | 115 +++++++++++-- >> .../hwtracing/coresight/coresight-tmc-core.c | 153 +++++++++++++++--- >> drivers/hwtracing/coresight/coresight-tmc.h | 2 + >> drivers/hwtracing/coresight/coresight-tpiu.c | 102 ++++++++++-- >> include/linux/coresight.h | 7 + >> 14 files changed, 721 insertions(+), 159 deletions(-) >> >
On 11/03/2024 06:04, Anshuman Khandual wrote: > > > On 3/5/24 23:55, Suzuki K Poulose wrote: >> On 22/02/2024 08:21, Anshuman Khandual wrote: >>> This moves remaining AMBA ACPI devices into respective platform drivers for >>> enabling ACPI based power management support. This series applies on kernel >>> v6.8-rc5 release. This series has been built, and boot tested on a DT based >>> (RB5) and ACPI supported coresight platform (N1SDP). >> >> Please rebase your series on coresight next and fix build failures with the extra warnings turned ON (should be on by default with next). > > I did rebase the series (which required some rebase related changes for some) on > coresight next i.e with the following commit as HEAD. > > a4f3057d19ff ("coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits") > > Although did not see any warning either with = m or = y based coresight options. > Is there any other particular config which needs to be enabled for these warnings > to come up ? > It doesn't apply cleanly on a4f305 for me, maybe you sent an old version after rebasing? This change in patch 5 is a warning for example, because not all members of the struct are initialised. No special config is required: + {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */" >> >> >> Suzuki >> >>> >>> https://git.gitlab.arm.com/linux-arm/linux-anshuman.git (amba_other_acpi_migration_v5) >>> >>> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> >>> Cc: Sudeep Holla <sudeep.holla@arm.com> >>> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> >>> Cc: Mike Leach <mike.leach@linaro.org> >>> Cc: James Clark <james.clark@arm.com> >>> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> >>> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> >>> Cc: linux-acpi@vger.kernel.org >>> Cc: linux-arm-kernel@lists.infradead.org >>> Cc: linux-kernel@vger.kernel.org >>> Cc: coresight@lists.linaro.org >>> Cc: linux-stm32@st-md-mailman.stormreply.com >>> >>> Changes in V5: >>> >>> - Used table->mask to filter out bits from pid in coresight_get_uci_data_from_amba() >>> - Dropped custom masks such as STM_AMBA_MASK and TMC_AMBA_MASK >>> - Modified tmc_etr_setup_caps() to accept struct csdev_access argument >>> - Reverted back tmc_etr_setup_caps() call site position in tmc_probe() >>> - Changed replicator and funnel devices to use the new helpers earlier in series >>> - Updated the commit messages regarding xxx_probe() refactoring and renaming >>> >>> Changes in V4: >>> >>> https://lore.kernel.org/all/20240123054608.1790189-1-anshuman.khandual@arm.com/ >>> >>> - Fixed PM imbalance in etm4_probe() error path with pm_runtime_disable() >>> - Restored back the pm_runtime_disable() on platform probe error paths >>> in replicator, funnel, catu, tpiu, tmc and stm devices >>> - Dropped dev_caps argument from __tmc_probe() >>> - Changed xxxx_platform_remove() for platform_driver->remove_new() callback >>> >>> Changes in V3: >>> >>> https://lore.kernel.org/all/20231208053939.42901-1-anshuman.khandual@arm.com/ >>> >>> - Split coresight_init_driver/remove_driver() helpers into a separate patch >>> - Added 'drvdata->pclk' comments in replicator, funnel, tpiu, tmc, and stm devices >>> - Updated funnel, and replicator drivers to use these new helpers >>> - Check for drvdata instead of drvdata->pclk in suspend and resume paths in catu, >>> tmc and debug devices >>> - Added patch to extract device name from AMBA pid based table lookup for stm >>> - Added patch to extract device properties from AMBA pid based table look for tmc >>> - Dropped pm_runtime_put() from common __probe() functions >>> - Handled pm_runtime_put() in AMBA driver in success path >>> - Handled pm_runtime_put() in platform driver in both success and error paths >>> >>> Changes in V2: >>> >>> https://lore.kernel.org/all/20231201062053.1268492-1-anshuman.khandual@arm.com/ >>> >>> - Dropped redundant devm_ioremap_resource() hunk from tmc_platform_probe() >>> - Defined coresight_[init|remove]_driver() for both AMBA/platform drivers >>> - Changed catu, tmc, tpiu, stm and debug coresight drivers to use the new >>> helpers avoiding build issues arising from module_amba_driver(), and >>> module_platform_driver() being on the same file >>> >>> Changes in V1: >>> >>> https://lore.kernel.org/all/20231027072943.3418997-1-anshuman.khandual@arm.com/ >>> >>> - Replaced all IS_ERR() instances with IS_ERR_OR_NULL() as per Suzuki >>> >>> Changes in RFC: >>> >>> https://lore.kernel.org/all/20230921042040.1334641-1-anshuman.khandual@arm.com/ >>> >>> Anshuman Khandual (11): >>> coresight: etm4x: Fix unbalanced pm_runtime_enable() >>> coresight: stm: Extract device name from AMBA pid based table lookup >>> coresight: tmc: Extract device properties from AMBA pid based table lookup >>> coresight: Add helpers registering/removing both AMBA and platform drivers >>> coresight: replicator: Move ACPI support from AMBA driver to platform driver >>> coresight: funnel: Move ACPI support from AMBA driver to platform driver >>> coresight: catu: Move ACPI support from AMBA driver to platform driver >>> coresight: tpiu: Move ACPI support from AMBA driver to platform driver >>> coresight: tmc: Move ACPI support from AMBA driver to platform driver >>> coresight: stm: Move ACPI support from AMBA driver to platform driver >>> coresight: debug: Move ACPI support from AMBA driver to platform driver >>> >>> drivers/acpi/arm64/amba.c | 8 - >>> drivers/hwtracing/coresight/coresight-catu.c | 142 +++++++++++++--- >>> drivers/hwtracing/coresight/coresight-catu.h | 1 + >>> drivers/hwtracing/coresight/coresight-core.c | 29 ++++ >>> .../hwtracing/coresight/coresight-cpu-debug.c | 141 ++++++++++++++-- >>> .../coresight/coresight-etm4x-core.c | 3 + >>> .../hwtracing/coresight/coresight-funnel.c | 86 +++++----- >>> drivers/hwtracing/coresight/coresight-priv.h | 10 ++ >>> .../coresight/coresight-replicator.c | 81 +++++----- >>> drivers/hwtracing/coresight/coresight-stm.c | 115 +++++++++++-- >>> .../hwtracing/coresight/coresight-tmc-core.c | 153 +++++++++++++++--- >>> drivers/hwtracing/coresight/coresight-tmc.h | 2 + >>> drivers/hwtracing/coresight/coresight-tpiu.c | 102 ++++++++++-- >>> include/linux/coresight.h | 7 + >>> 14 files changed, 721 insertions(+), 159 deletions(-) >>> >>
On 3/11/24 14:55, James Clark wrote: > > On 11/03/2024 06:04, Anshuman Khandual wrote: >> >> On 3/5/24 23:55, Suzuki K Poulose wrote: >>> On 22/02/2024 08:21, Anshuman Khandual wrote: >>>> This moves remaining AMBA ACPI devices into respective platform drivers for >>>> enabling ACPI based power management support. This series applies on kernel >>>> v6.8-rc5 release. This series has been built, and boot tested on a DT based >>>> (RB5) and ACPI supported coresight platform (N1SDP). >>> Please rebase your series on coresight next and fix build failures with the extra warnings turned ON (should be on by default with next). >> I did rebase the series (which required some rebase related changes for some) on >> coresight next i.e with the following commit as HEAD. >> >> a4f3057d19ff ("coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits") >> >> Although did not see any warning either with = m or = y based coresight options. >> Is there any other particular config which needs to be enabled for these warnings >> to come up ? >> > It doesn't apply cleanly on a4f305 for me, maybe you sent an old version > after rebasing? Ohh, I was not clear enough earlier. This series is NOT rebased against coresight next. I am preparing V6 series respin which is rebased against the above mentioned commit on coresight next branch instead. > > This change in patch 5 is a warning for example, because not all members > of the struct are initialised. No special config is required: > > + {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */" Right, will change the above as follows and fix other affected places as well. {"ARMHC98D", 0, 0, 0}, /* ARM CoreSight Dynamic Replicator */