Message ID | 20240314112657.167006-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
---|---|
State | Accepted |
Commit | 216e62744b91c9716228fe13f564e83381a1342e |
Headers | show |
Series | arm64: dts: qcom: apq8016-sbc: correct GPIO LEDs node names | expand |
On Thu, 14 Mar 2024 at 16:57, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > Individual LEDs in a GPIO LEDs device node are not addressable, thus > unit address is not correct. > > dtc is also not happy: > > Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but no reg or ranges property > > Reported-by: Sumit Garg <sumit.garg@linaro.org> > Closes: https://lore.kernel.org/all/CAFA6WYNRwF7GqhBk2B7i-deT3aLxNQckhnOasjip2TYm4HZgAw@mail.gmail.com/ > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > Reviewed-by: Sumit Garg <sumit.garg@linaro.org> -Sumit > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > index 9ffad7d1f2b6..aba08424aa38 100644 > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > @@ -91,7 +91,7 @@ leds { > > compatible = "gpio-leds"; > > - led@1 { > + led-1 { > label = "apq8016-sbc:green:user1"; > function = LED_FUNCTION_HEARTBEAT; > color = <LED_COLOR_ID_GREEN>; > @@ -100,7 +100,7 @@ led@1 { > default-state = "off"; > }; > > - led@2 { > + led-2 { > label = "apq8016-sbc:green:user2"; > function = LED_FUNCTION_DISK_ACTIVITY; > color = <LED_COLOR_ID_GREEN>; > @@ -109,7 +109,7 @@ led@2 { > default-state = "off"; > }; > > - led@3 { > + led-3 { > label = "apq8016-sbc:green:user3"; > function = LED_FUNCTION_DISK_ACTIVITY; > color = <LED_COLOR_ID_GREEN>; > @@ -118,7 +118,7 @@ led@3 { > default-state = "off"; > }; > > - led@4 { > + led-4 { > label = "apq8016-sbc:green:user4"; > color = <LED_COLOR_ID_GREEN>; > gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; > @@ -127,7 +127,7 @@ led@4 { > default-state = "off"; > }; > > - led@5 { > + led-5 { > label = "apq8016-sbc:yellow:wlan"; > function = LED_FUNCTION_WLAN; > color = <LED_COLOR_ID_YELLOW>; > @@ -136,7 +136,7 @@ led@5 { > default-state = "off"; > }; > > - led@6 { > + led-6 { > label = "apq8016-sbc:blue:bt"; > function = LED_FUNCTION_BLUETOOTH; > color = <LED_COLOR_ID_BLUE>; > -- > 2.34.1 >
On 14/03/2024 12:26, Krzysztof Kozlowski wrote: > Individual LEDs in a GPIO LEDs device node are not addressable, thus > unit address is not correct. > > dtc is also not happy: > > Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but no reg or ranges property > > Reported-by: Sumit Garg <sumit.garg@linaro.org> > Closes: https://lore.kernel.org/all/CAFA6WYNRwF7GqhBk2B7i-deT3aLxNQckhnOasjip2TYm4HZgAw@mail.gmail.com/ > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > index 9ffad7d1f2b6..aba08424aa38 100644 > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts > @@ -91,7 +91,7 @@ leds { > > compatible = "gpio-leds"; > > - led@1 { > + led-1 { > label = "apq8016-sbc:green:user1"; > function = LED_FUNCTION_HEARTBEAT; > color = <LED_COLOR_ID_GREEN>; > @@ -100,7 +100,7 @@ led@1 { > default-state = "off"; > }; > > - led@2 { > + led-2 { > label = "apq8016-sbc:green:user2"; > function = LED_FUNCTION_DISK_ACTIVITY; > color = <LED_COLOR_ID_GREEN>; > @@ -109,7 +109,7 @@ led@2 { > default-state = "off"; > }; > > - led@3 { > + led-3 { > label = "apq8016-sbc:green:user3"; > function = LED_FUNCTION_DISK_ACTIVITY; > color = <LED_COLOR_ID_GREEN>; > @@ -118,7 +118,7 @@ led@3 { > default-state = "off"; > }; > > - led@4 { > + led-4 { > label = "apq8016-sbc:green:user4"; > color = <LED_COLOR_ID_GREEN>; > gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; > @@ -127,7 +127,7 @@ led@4 { > default-state = "off"; > }; > > - led@5 { > + led-5 { > label = "apq8016-sbc:yellow:wlan"; > function = LED_FUNCTION_WLAN; > color = <LED_COLOR_ID_YELLOW>; > @@ -136,7 +136,7 @@ led@5 { > default-state = "off"; > }; > > - led@6 { > + led-6 { > label = "apq8016-sbc:blue:bt"; > function = LED_FUNCTION_BLUETOOTH; > color = <LED_COLOR_ID_BLUE>; Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On Thu, 14 Mar 2024 12:26:57 +0100, Krzysztof Kozlowski wrote: > Individual LEDs in a GPIO LEDs device node are not addressable, thus > unit address is not correct. > > dtc is also not happy: > > Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but no reg or ranges property > > [...] Applied, thanks! [1/1] arm64: dts: qcom: apq8016-sbc: correct GPIO LEDs node names commit: 216e62744b91c9716228fe13f564e83381a1342e Best regards,
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 9ffad7d1f2b6..aba08424aa38 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -91,7 +91,7 @@ leds { compatible = "gpio-leds"; - led@1 { + led-1 { label = "apq8016-sbc:green:user1"; function = LED_FUNCTION_HEARTBEAT; color = <LED_COLOR_ID_GREEN>; @@ -100,7 +100,7 @@ led@1 { default-state = "off"; }; - led@2 { + led-2 { label = "apq8016-sbc:green:user2"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; @@ -109,7 +109,7 @@ led@2 { default-state = "off"; }; - led@3 { + led-3 { label = "apq8016-sbc:green:user3"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; @@ -118,7 +118,7 @@ led@3 { default-state = "off"; }; - led@4 { + led-4 { label = "apq8016-sbc:green:user4"; color = <LED_COLOR_ID_GREEN>; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; @@ -127,7 +127,7 @@ led@4 { default-state = "off"; }; - led@5 { + led-5 { label = "apq8016-sbc:yellow:wlan"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_YELLOW>; @@ -136,7 +136,7 @@ led@5 { default-state = "off"; }; - led@6 { + led-6 { label = "apq8016-sbc:blue:bt"; function = LED_FUNCTION_BLUETOOTH; color = <LED_COLOR_ID_BLUE>;
Individual LEDs in a GPIO LEDs device node are not addressable, thus unit address is not correct. dtc is also not happy: Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but no reg or ranges property Reported-by: Sumit Garg <sumit.garg@linaro.org> Closes: https://lore.kernel.org/all/CAFA6WYNRwF7GqhBk2B7i-deT3aLxNQckhnOasjip2TYm4HZgAw@mail.gmail.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)