diff mbox series

[v2,4/4] arm64: dts: mediatek: mt8186-corsola: Update min voltage constraint for Vgpu

Message ID 20240315111621.2263159-5-treapking@chromium.org (mailing list archive)
State New, archived
Headers show
Series Update Vgpu minimum voltage for MT8183, MT8186, MT8192, MT8195 | expand

Commit Message

Pin-yen Lin March 15, 2024, 11:16 a.m. UTC
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so update the minimum voltage constraint from 600000 uV to
500000 uV as listed on the mt6366 datasheet.

Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>

---

Changes in v2:
- New in v2

 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

AngeloGioacchino Del Regno March 15, 2024, 12:36 p.m. UTC | #1
Il 15/03/24 12:16, Pin-yen Lin ha scritto:
> The requested voltage could be lower than the minimum voltage on the
> GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
> enabled, so update the minimum voltage constraint from 600000 uV to
> 500000 uV as listed on the mt6366 datasheet.
> 
> Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
> 

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index 3dea28f1d806..1807e9d6cb0e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -1296,7 +1296,7 @@  mt6366_vgpu_reg: vgpu {
 				 * regulator coupling requirements.
 				 */
 				regulator-name = "ppvar_dvdd_vgpu";
-				regulator-min-microvolt = <600000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <6250>;
 				regulator-enable-ramp-delay = <200>;