| Message ID | 20240314094238.3315-1-shuijing.li@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mediatek: dsi: Add dsi per-frame lp code for mt8188 | expand |
Il 14/03/24 10:41, Shuijing Li ha scritto: > Adding the per-frame lp function of mt8188, which can keep HFP in HS and > reduce the time required for each line to enter and exit low power. > Per Frame LP: > |<----------One Active Frame-------->| > --______________________________________----___________________ > ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^ > > Per Line LP: > |<---------------One Active Frame----------->| > --______________--______________--______________----______________ > ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ > > Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dsi.c | 100 +++++++++++++++++++++++++++++ > 1 file changed, 100 insertions(+) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c > index a2fdfc8ddb15..e6f4807c8711 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > @@ -83,6 +83,7 @@ > #define DSI_HSA_WC 0x50 > #define DSI_HBP_WC 0x54 > #define DSI_HFP_WC 0x58 > +#define DSI_BLLP_WC 0x5C > > #define DSI_CMDQ_SIZE 0x60 > #define CMDQ_SIZE 0x3f > @@ -180,6 +181,7 @@ struct mtk_dsi_driver_data { > bool has_shadow_ctl; > bool has_size_ctl; > bool cmdq_long_packet_ctl; > + bool support_per_frame_lp; > }; > > struct mtk_dsi { > @@ -516,6 +518,103 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) > (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes; > } > > + if (dsi->driver_data->support_per_frame_lp) { This really looks like a good candidate to fit in a function on its own... > + unsigned int lpx = 0, da_hs_exit = 0, da_hs_prep = 0, da_hs_trail = 0; > + unsigned int da_hs_zero = 0, ps_wc = 0, hs_vb_ps_wc = 0; > + u32 bllp_wc, bllp_en, v_active_roundup, hstx_cklp_wc; > + u32 hstx_cklp_wc_max, hstx_cklp_wc_min; > + > + da_hs_trail = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 24) & 0xff; > + bllp_en = (readl(dsi->regs + DSI_TXRX_CTRL) >> 7) & 0x1; (somewhere: #define HSTX_BLLP_EN BIT(7)) u32 timecon0, txrx_ctrl; timecon0 = readl(....DSI_PHY_TIMECON0); txrx_ctrl = readl(.....); da_hs_trail = FIELD_GET(HS_TRAIL, timecon0); bllp_en = FIELD_GET(HSTX_BLLP_EN, txrx_ctrl); > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) { > + horizontal_sync_active_byte = > + (vm->hsync_len * dsi_tmp_buf_bpp - 10); > + horizontal_backporch_byte = > + (vm->hback_porch * dsi_tmp_buf_bpp - 10); > + horizontal_frontporch_byte = > + (vm->hfront_porch * dsi_tmp_buf_bpp - 12); > + > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > + v_active_roundup = (32 + horizontal_sync_active_byte + > + horizontal_backporch_byte + ps_wc + > + horizontal_frontporch_byte) % dsi->lanes; > + if (v_active_roundup) > + horizontal_backporch_byte = horizontal_backporch_byte + > + dsi->lanes - v_active_roundup; > + hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 + Please document those "magic numbers": why is this 12 + 2 + 4 ? What is 12? what is 2? what is 4? > + horizontal_sync_active_byte), dsi->lanes) + da_hs_trail + 1) > + * dsi->lanes / 6 - 1; > + hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 + > + horizontal_sync_active_byte + horizontal_backporch_byte + > + ps_wc), dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; > + } else { > + horizontal_sync_active_byte = vm->hsync_len * dsi_tmp_buf_bpp - 4; > + > + horizontal_backporch_byte = (vm->hback_porch + vm->hsync_len) * > + dsi_tmp_buf_bpp - 10; > + hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi->lanes) + da_hs_trail + 1) > + * dsi->lanes / 6 - 1; > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) { > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > + bllp_wc = readl(dsi->regs + DSI_BLLP_WC) & 0xfff; Please use bitfield macros here as well. > + horizontal_frontporch_byte = (vm->hfront_porch * > + dsi_tmp_buf_bpp - 18); > + > + v_active_roundup = (28 + horizontal_backporch_byte + ps_wc + > + horizontal_frontporch_byte + bllp_wc) % dsi->lanes; > + if (v_active_roundup) > + horizontal_backporch_byte = horizontal_backporch_byte + > + dsi->lanes - v_active_roundup; > + if (bllp_en) { > + hstx_cklp_wc_max = (DIV_ROUND_UP((16 + 6 + 4 + > + horizontal_backporch_byte + bllp_wc + ps_wc), > + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; > + } else { > + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 + > + horizontal_backporch_byte + bllp_wc + ps_wc), > + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; > + } > + } else { > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > + horizontal_frontporch_byte = (vm->hfront_porch * > + dsi_tmp_buf_bpp - 12); > + > + v_active_roundup = (22 + horizontal_backporch_byte + ps_wc + > + horizontal_frontporch_byte) % dsi->lanes; > + if (v_active_roundup) > + horizontal_backporch_byte = horizontal_backporch_byte + > + dsi->lanes - v_active_roundup; > + > + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 + > + horizontal_backporch_byte + ps_wc), > + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; > + } > + } > + hstx_cklp_wc = (readl(dsi->regs + DSI_HSTX_CKL_WC) >> 2) & 0x3fff; same here > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > + hstx_cklp_wc >= hstx_cklp_wc_max) { > + hstx_cklp_wc = (hstx_cklp_wc_max / 2) << 2; and same here... and everywhere else. > + writel(hstx_cklp_wc, dsi->regs + DSI_HSTX_CKL_WC); > + } > + hstx_cklp_wc = hstx_cklp_wc >> 2; > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > + hstx_cklp_wc >= hstx_cklp_wc_max) { > + DRM_WARN("Wrong setting of hstx_ckl_wc\n"); > + } > + > + lpx = readl(dsi->regs + DSI_PHY_TIMECON0) & 0xff; > + da_hs_exit = (readl(dsi->regs + DSI_PHY_TIMECON1) >> 24) & 0xff; > + da_hs_prep = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 8) & 0xff; > + da_hs_zero = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 16) & 0xff; > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > + hs_vb_ps_wc = ps_wc - > + (lpx + da_hs_exit + da_hs_prep + da_hs_zero + 2) > + * dsi->lanes; > + horizontal_frontporch_byte = (1 << 31) > + | (hs_vb_ps_wc << 16) > + | (horizontal_frontporch_byte); > + } > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC); > writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC); > writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC); > @@ -1246,6 +1345,7 @@ static const struct mtk_dsi_driver_data mt8188_dsi_driver_data = { > .has_shadow_ctl = true, > .has_size_ctl = true, > .cmdq_long_packet_ctl = true, > + .support_per_frame_lp = true, Is this supported only on MT8188? Are you sure that MT8195 doesn't support that? Regards, Angelo > }; > > static const struct of_device_id mtk_dsi_of_match[] = {
Hi, Shuijing: Add 'drm/' in the title. On Thu, 2024-03-14 at 17:41 +0800, Shuijing Li wrote: > Adding the per-frame lp function of mt8188, which can keep HFP in HS > and > reduce the time required for each line to enter and exit low power. > Per Frame LP: > |<----------One Active Frame-------->| > --______________________________________----___________________ > ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^ > > Per Line LP: > |<---------------One Active Frame----------->| > --______________--______________--______________----______________ > ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ As I know, some low power mode would has some side effect. For example, CPU dvfs would let CPU run in low frequency when CPU is idle, but when CPU is suddenly busy, it would take some time to let CPU frequency speed up and may cause some real time issue. Does this have any side effect. If so, please describe it. > > Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dsi.c | 100 > +++++++++++++++++++++++++++++ > 1 file changed, 100 insertions(+) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c > b/drivers/gpu/drm/mediatek/mtk_dsi.c > index a2fdfc8ddb15..e6f4807c8711 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > @@ -83,6 +83,7 @@ > #define DSI_HSA_WC 0x50 > #define DSI_HBP_WC 0x54 > #define DSI_HFP_WC 0x58 > +#define DSI_BLLP_WC 0x5C > > #define DSI_CMDQ_SIZE 0x60 > #define CMDQ_SIZE 0x3f > @@ -180,6 +181,7 @@ struct mtk_dsi_driver_data { > bool has_shadow_ctl; > bool has_size_ctl; > bool cmdq_long_packet_ctl; > + bool support_per_frame_lp; > }; > > struct mtk_dsi { > @@ -516,6 +518,103 @@ static void mtk_dsi_config_vdo_timing(struct > mtk_dsi *dsi) > (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi- > >lanes; > } > > + if (dsi->driver_data->support_per_frame_lp) { > + unsigned int lpx = 0, da_hs_exit = 0, da_hs_prep = 0, > da_hs_trail = 0; > + unsigned int da_hs_zero = 0, ps_wc = 0, hs_vb_ps_wc = > 0; It's not necessary to initialize to zero because these variable would be assigned to other value later. > + u32 bllp_wc, bllp_en, v_active_roundup, hstx_cklp_wc; > + u32 hstx_cklp_wc_max, hstx_cklp_wc_min; > + > + da_hs_trail = (readl(dsi->regs + DSI_PHY_TIMECON0) >> > 24) & 0xff; operator '>>' has higher priority than operator '&', so it's not necessary to add '()'. > + bllp_en = (readl(dsi->regs + DSI_TXRX_CTRL) >> 7) & > 0x1; > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) { > + horizontal_sync_active_byte = > + (vm->hsync_len * dsi_tmp_buf_bpp - 10); '()' is redundant. > + horizontal_backporch_byte = > + (vm->hback_porch * dsi_tmp_buf_bpp - > 10); ditto. > + horizontal_frontporch_byte = > + (vm->hfront_porch * dsi_tmp_buf_bpp - > 12); ditto. > + > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > + v_active_roundup = (32 + > horizontal_sync_active_byte + > + horizontal_backporch_byte + ps_wc + > + horizontal_frontporch_byte) % dsi- > >lanes; > + if (v_active_roundup) > + horizontal_backporch_byte = > horizontal_backporch_byte + > + dsi->lanes - v_active_roundup; > + hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 + > + horizontal_sync_active_byte), dsi- > >lanes) + da_hs_trail + 1) > + * dsi->lanes / 6 - 1; > + hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 + > + horizontal_sync_active_byte + > horizontal_backporch_byte + > + ps_wc), dsi->lanes) + da_hs_trail + 1) > * dsi->lanes / 6 - 1; > + } else { > + horizontal_sync_active_byte = vm->hsync_len * > dsi_tmp_buf_bpp - 4; > + > + horizontal_backporch_byte = (vm->hback_porch + > vm->hsync_len) * > + dsi_tmp_buf_bpp - 10; > + hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi->lanes) > + da_hs_trail + 1) > + * dsi->lanes / 6 - 1; > + > + if (dsi->mode_flags & > MIPI_DSI_MODE_VIDEO_BURST) { > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & > 0x7fff; > + bllp_wc = readl(dsi->regs + > DSI_BLLP_WC) & 0xfff; > + horizontal_frontporch_byte = (vm- > >hfront_porch * > + dsi_tmp_buf_bpp - 18); > + > + v_active_roundup = (28 + > horizontal_backporch_byte + ps_wc + > + horizontal_frontporch_byte + > bllp_wc) % dsi->lanes; > + if (v_active_roundup) > + horizontal_backporch_byte = > horizontal_backporch_byte + > + dsi->lanes - v_active_roundup; > + if (bllp_en) { > + hstx_cklp_wc_max = > (DIV_ROUND_UP((16 + 6 + 4 + > + horizontal_backporch_by > te + bllp_wc + ps_wc), > + dsi->lanes) + > da_hs_trail + 1) * dsi->lanes / 6 - 1; > + } else { > + hstx_cklp_wc_max = > (DIV_ROUND_UP((12 + 4 + 4 + > + horizontal_backporch_by > te + bllp_wc + ps_wc), > + dsi->lanes) + > da_hs_trail + 1) * dsi->lanes / 6 - 1; > + } > + } else { > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & > 0x7fff; > + horizontal_frontporch_byte = (vm- > >hfront_porch * > + dsi_tmp_buf_bpp - 12); > + > + v_active_roundup = (22 + > horizontal_backporch_byte + ps_wc + > + horizontal_frontporch_byte) % > dsi->lanes; > + if (v_active_roundup) > + horizontal_backporch_byte = > horizontal_backporch_byte + > + dsi->lanes - v_active_roundup; > + > + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + > 4 + 4 + > + horizontal_backporch_byte + > ps_wc), > + dsi->lanes) + da_hs_trail + 1) > * dsi->lanes / 6 - 1; > + } > + } > + hstx_cklp_wc = (readl(dsi->regs + DSI_HSTX_CKL_WC) >> > 2) & 0x3fff; Hardware register is set according to software variable, so you could get this value from software variable. DSI_HSTX_CKL_WC is set in mtk_dsi_ps_control_vact() as ps_wc, so you could use ps_wc instead of read it back from register. Regards, CK > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > + hstx_cklp_wc >= hstx_cklp_wc_max) { > + hstx_cklp_wc = (hstx_cklp_wc_max / 2) << 2; > + writel(hstx_cklp_wc, dsi->regs + > DSI_HSTX_CKL_WC); > + } > + hstx_cklp_wc = hstx_cklp_wc >> 2; > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > + hstx_cklp_wc >= hstx_cklp_wc_max) { > + DRM_WARN("Wrong setting of hstx_ckl_wc\n"); > + } > + > + lpx = readl(dsi->regs + DSI_PHY_TIMECON0) & 0xff; > + da_hs_exit = (readl(dsi->regs + DSI_PHY_TIMECON1) >> > 24) & 0xff; > + da_hs_prep = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 8) > & 0xff; > + da_hs_zero = (readl(dsi->regs + DSI_PHY_TIMECON0) >> > 16) & 0xff; > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > + hs_vb_ps_wc = ps_wc - > + (lpx + da_hs_exit + da_hs_prep + da_hs_zero + > 2) > + * dsi->lanes; > + horizontal_frontporch_byte = (1 << 31) > + | (hs_vb_ps_wc << 16) > + | (horizontal_frontporch_byte); > + } > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC); > writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC); > writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC); > @@ -1246,6 +1345,7 @@ static const struct mtk_dsi_driver_data > mt8188_dsi_driver_data = { > .has_shadow_ctl = true, > .has_size_ctl = true, > .cmdq_long_packet_ctl = true, > + .support_per_frame_lp = true, > }; > > static const struct of_device_id mtk_dsi_of_match[] = {
Dear Angelo, > Please document those "magic numbers": why is this 12 + 2 + 4 ? > What is 12? what is 2? what is 4? ==> This is several packets, as specified in chapter 8.11 of the DSI specification. Taking this as an example, 12 = 4 (HSS) + 4 (HSA_PH) + 4 (HSE), 2 = HSA_PF, and 4 = HBP_PH. > Is this supported only on MT8188? Are you sure that MT8195 doesn't > support that? ==> MT8195 does not have this plan. Based on the feedback you provided, I have made the necessary changes and would like to submit a version 2 for your consideration at a later date. Thank you for your time and attention to this matter. Best regards, Shuijing On Thu, 2024-03-14 at 11:10 +0100, AngeloGioacchino Del Regno wrote: > Il 14/03/24 10:41, Shuijing Li ha scritto: > > Adding the per-frame lp function of mt8188, which can keep HFP in > > HS and > > reduce the time required for each line to enter and exit low power. > > Per Frame LP: > > |<----------One Active Frame-------->| > > --______________________________________----___________________ > > ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^ > > > > Per Line LP: > > |<---------------One Active Frame----------->| > > --______________--______________--______________----______________ > > ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ > > > > Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dsi.c | 100 > > +++++++++++++++++++++++++++++ > > 1 file changed, 100 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c > > b/drivers/gpu/drm/mediatek/mtk_dsi.c > > index a2fdfc8ddb15..e6f4807c8711 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > > @@ -83,6 +83,7 @@ > > #define DSI_HSA_WC 0x50 > > #define DSI_HBP_WC 0x54 > > #define DSI_HFP_WC 0x58 > > +#define DSI_BLLP_WC 0x5C > > > > #define DSI_CMDQ_SIZE 0x60 > > #define CMDQ_SIZE 0x3f > > @@ -180,6 +181,7 @@ struct mtk_dsi_driver_data { > > bool has_shadow_ctl; > > bool has_size_ctl; > > bool cmdq_long_packet_ctl; > > + bool support_per_frame_lp; > > }; > > > > struct mtk_dsi { > > @@ -516,6 +518,103 @@ static void mtk_dsi_config_vdo_timing(struct > > mtk_dsi *dsi) > > (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi- > > >lanes; > > } > > > > + if (dsi->driver_data->support_per_frame_lp) { > > This really looks like a good candidate to fit in a function on its > own... > > > + unsigned int lpx = 0, da_hs_exit = 0, da_hs_prep = 0, > > da_hs_trail = 0; > > + unsigned int da_hs_zero = 0, ps_wc = 0, hs_vb_ps_wc = > > 0; > > + u32 bllp_wc, bllp_en, v_active_roundup, hstx_cklp_wc; > > + u32 hstx_cklp_wc_max, hstx_cklp_wc_min; > > + > > + da_hs_trail = (readl(dsi->regs + DSI_PHY_TIMECON0) >> > > 24) & 0xff; > > + bllp_en = (readl(dsi->regs + DSI_TXRX_CTRL) >> 7) & > > 0x1; > > (somewhere: #define HSTX_BLLP_EN BIT(7)) > > u32 timecon0, txrx_ctrl; > > timecon0 = readl(....DSI_PHY_TIMECON0); > txrx_ctrl = readl(.....); > > da_hs_trail = FIELD_GET(HS_TRAIL, timecon0); > bllp_en = FIELD_GET(HSTX_BLLP_EN, txrx_ctrl); > > > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) { > > + horizontal_sync_active_byte = > > + (vm->hsync_len * dsi_tmp_buf_bpp - 10); > > + horizontal_backporch_byte = > > + (vm->hback_porch * dsi_tmp_buf_bpp - > > 10); > > + horizontal_frontporch_byte = > > + (vm->hfront_porch * dsi_tmp_buf_bpp - > > 12); > > + > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > > + v_active_roundup = (32 + > > horizontal_sync_active_byte + > > + horizontal_backporch_byte + ps_wc + > > + horizontal_frontporch_byte) % dsi- > > >lanes; > > + if (v_active_roundup) > > + horizontal_backporch_byte = > > horizontal_backporch_byte + > > + dsi->lanes - v_active_roundup; > > + hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 + > > Please document those "magic numbers": why is this 12 + 2 + 4 ? > What is 12? what is 2? what is 4? > > > + horizontal_sync_active_byte), dsi- > > >lanes) + da_hs_trail + 1) > > + * dsi->lanes / 6 - 1; > > + hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 + > > + horizontal_sync_active_byte + > > horizontal_backporch_byte + > > + ps_wc), dsi->lanes) + da_hs_trail + 1) > > * dsi->lanes / 6 - 1; > > + } else { > > + horizontal_sync_active_byte = vm->hsync_len * > > dsi_tmp_buf_bpp - 4; > > + > > + horizontal_backporch_byte = (vm->hback_porch + > > vm->hsync_len) * > > + dsi_tmp_buf_bpp - 10; > > + hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi->lanes) > > + da_hs_trail + 1) > > + * dsi->lanes / 6 - 1; > > + > > + if (dsi->mode_flags & > > MIPI_DSI_MODE_VIDEO_BURST) { > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & > > 0x7fff; > > + bllp_wc = readl(dsi->regs + > > DSI_BLLP_WC) & 0xfff; > > Please use bitfield macros here as well. > > > + horizontal_frontporch_byte = (vm- > > >hfront_porch * > > + dsi_tmp_buf_bpp - 18); > > + > > + v_active_roundup = (28 + > > horizontal_backporch_byte + ps_wc + > > + horizontal_frontporch_byte + > > bllp_wc) % dsi->lanes; > > + if (v_active_roundup) > > + horizontal_backporch_byte = > > horizontal_backporch_byte + > > + dsi->lanes - v_active_roundup; > > + if (bllp_en) { > > + hstx_cklp_wc_max = > > (DIV_ROUND_UP((16 + 6 + 4 + > > + horizontal_backporch_by > > te + bllp_wc + ps_wc), > > + dsi->lanes) + > > da_hs_trail + 1) * dsi->lanes / 6 - 1; > > + } else { > > + hstx_cklp_wc_max = > > (DIV_ROUND_UP((12 + 4 + 4 + > > + horizontal_backporch_by > > te + bllp_wc + ps_wc), > > + dsi->lanes) + > > da_hs_trail + 1) * dsi->lanes / 6 - 1; > > + } > > + } else { > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & > > 0x7fff; > > + horizontal_frontporch_byte = (vm- > > >hfront_porch * > > + dsi_tmp_buf_bpp - 12); > > + > > + v_active_roundup = (22 + > > horizontal_backporch_byte + ps_wc + > > + horizontal_frontporch_byte) % > > dsi->lanes; > > + if (v_active_roundup) > > + horizontal_backporch_byte = > > horizontal_backporch_byte + > > + dsi->lanes - v_active_roundup; > > + > > + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + > > 4 + 4 + > > + horizontal_backporch_byte + > > ps_wc), > > + dsi->lanes) + da_hs_trail + 1) > > * dsi->lanes / 6 - 1; > > + } > > + } > > + hstx_cklp_wc = (readl(dsi->regs + DSI_HSTX_CKL_WC) >> > > 2) & 0x3fff; > > same here > > > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > > + hstx_cklp_wc >= hstx_cklp_wc_max) { > > + hstx_cklp_wc = (hstx_cklp_wc_max / 2) << 2; > > and same here... and everywhere else. > > > + writel(hstx_cklp_wc, dsi->regs + > > DSI_HSTX_CKL_WC); > > + } > > + hstx_cklp_wc = hstx_cklp_wc >> 2; > > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > > + hstx_cklp_wc >= hstx_cklp_wc_max) { > > + DRM_WARN("Wrong setting of hstx_ckl_wc\n"); > > + } > > + > > + lpx = readl(dsi->regs + DSI_PHY_TIMECON0) & 0xff; > > + da_hs_exit = (readl(dsi->regs + DSI_PHY_TIMECON1) >> > > 24) & 0xff; > > + da_hs_prep = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 8) > > & 0xff; > > + da_hs_zero = (readl(dsi->regs + DSI_PHY_TIMECON0) >> > > 16) & 0xff; > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > > + hs_vb_ps_wc = ps_wc - > > + (lpx + da_hs_exit + da_hs_prep + da_hs_zero + > > 2) > > + * dsi->lanes; > > + horizontal_frontporch_byte = (1 << 31) > > + | (hs_vb_ps_wc << 16) > > + | (horizontal_frontporch_byte); > > + } > > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC); > > writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC); > > writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC); > > @@ -1246,6 +1345,7 @@ static const struct mtk_dsi_driver_data > > mt8188_dsi_driver_data = { > > .has_shadow_ctl = true, > > .has_size_ctl = true, > > .cmdq_long_packet_ctl = true, > > + .support_per_frame_lp = true, > > Is this supported only on MT8188? Are you sure that MT8195 doesn't > support that? > > Regards, > Angelo > > > }; > > > > static const struct of_device_id mtk_dsi_of_match[] = { > >
Dear CK, > As I know, some low power mode would has some side effect. For > example, > CPU dvfs would let CPU run in low frequency when CPU is idle, but > when > CPU is suddenly busy, it would take some time to let CPU frequency > speed up and may cause some real time issue. Does this have any side > effect. If so, please describe it. > ==》This is not a CPU low-power feature, but a characteristic of DSI. It maintains high speed without entering low power during the DSI active period, which can save the time of entering and exiting low power, without side effects. Based on the feedback you provided, I have made the necessary changes and would like to submit a version 2 for your consideration at a later date. Thank you for your time and attention to this matter. Best regards, Shuijing On Wed, 2024-03-20 at 06:03 +0000, CK Hu (胡俊光) wrote: > Hi, Shuijing: > > Add 'drm/' in the title. > > On Thu, 2024-03-14 at 17:41 +0800, Shuijing Li wrote: > > Adding the per-frame lp function of mt8188, which can keep HFP in > > HS > > and > > reduce the time required for each line to enter and exit low power. > > Per Frame LP: > > |<----------One Active Frame-------->| > > --______________________________________----___________________ > > ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^ > > > > Per Line LP: > > |<---------------One Active Frame----------->| > > --______________--______________--______________----______________ > > ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ > > As I know, some low power mode would has some side effect. For > example, > CPU dvfs would let CPU run in low frequency when CPU is idle, but > when > CPU is suddenly busy, it would take some time to let CPU frequency > speed up and may cause some real time issue. Does this have any side > effect. If so, please describe it. > > > > > Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dsi.c | 100 > > +++++++++++++++++++++++++++++ > > 1 file changed, 100 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c > > b/drivers/gpu/drm/mediatek/mtk_dsi.c > > index a2fdfc8ddb15..e6f4807c8711 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > > @@ -83,6 +83,7 @@ > > #define DSI_HSA_WC 0x50 > > #define DSI_HBP_WC 0x54 > > #define DSI_HFP_WC 0x58 > > +#define DSI_BLLP_WC 0x5C > > > > #define DSI_CMDQ_SIZE 0x60 > > #define CMDQ_SIZE 0x3f > > @@ -180,6 +181,7 @@ struct mtk_dsi_driver_data { > > bool has_shadow_ctl; > > bool has_size_ctl; > > bool cmdq_long_packet_ctl; > > + bool support_per_frame_lp; > > }; > > > > struct mtk_dsi { > > @@ -516,6 +518,103 @@ static void mtk_dsi_config_vdo_timing(struct > > mtk_dsi *dsi) > > (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi- > > > lanes; > > > > } > > > > + if (dsi->driver_data->support_per_frame_lp) { > > + unsigned int lpx = 0, da_hs_exit = 0, da_hs_prep = 0, > > da_hs_trail = 0; > > + unsigned int da_hs_zero = 0, ps_wc = 0, hs_vb_ps_wc = > > 0; > > It's not necessary to initialize to zero because these variable would > be assigned to other value later. > > > + u32 bllp_wc, bllp_en, v_active_roundup, hstx_cklp_wc; > > + u32 hstx_cklp_wc_max, hstx_cklp_wc_min; > > + > > + da_hs_trail = (readl(dsi->regs + DSI_PHY_TIMECON0) >> > > 24) & 0xff; > > operator '>>' has higher priority than operator '&', so it's not > necessary to add '()'. > > > + bllp_en = (readl(dsi->regs + DSI_TXRX_CTRL) >> 7) & > > 0x1; > > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) { > > + horizontal_sync_active_byte = > > + (vm->hsync_len * dsi_tmp_buf_bpp - 10); > > '()' is redundant. > > > + horizontal_backporch_byte = > > + (vm->hback_porch * dsi_tmp_buf_bpp - > > 10); > > ditto. > > > + horizontal_frontporch_byte = > > + (vm->hfront_porch * dsi_tmp_buf_bpp - > > 12); > > ditto. > > > + > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > > + v_active_roundup = (32 + > > horizontal_sync_active_byte + > > + horizontal_backporch_byte + ps_wc + > > + horizontal_frontporch_byte) % dsi- > > > lanes; > > > > + if (v_active_roundup) > > + horizontal_backporch_byte = > > horizontal_backporch_byte + > > + dsi->lanes - v_active_roundup; > > + hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 + > > + horizontal_sync_active_byte), dsi- > > > lanes) + da_hs_trail + 1) > > > > + * dsi->lanes / 6 - 1; > > + hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 + > > + horizontal_sync_active_byte + > > horizontal_backporch_byte + > > + ps_wc), dsi->lanes) + da_hs_trail + 1) > > * dsi->lanes / 6 - 1; > > + } else { > > + horizontal_sync_active_byte = vm->hsync_len * > > dsi_tmp_buf_bpp - 4; > > + > > + horizontal_backporch_byte = (vm->hback_porch + > > vm->hsync_len) * > > + dsi_tmp_buf_bpp - 10; > > + hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi- > > >lanes) > > + da_hs_trail + 1) > > + * dsi->lanes / 6 - 1; > > + > > + if (dsi->mode_flags & > > MIPI_DSI_MODE_VIDEO_BURST) { > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & > > 0x7fff; > > + bllp_wc = readl(dsi->regs + > > DSI_BLLP_WC) & 0xfff; > > + horizontal_frontporch_byte = (vm- > > > hfront_porch * > > > > + dsi_tmp_buf_bpp - 18); > > + > > + v_active_roundup = (28 + > > horizontal_backporch_byte + ps_wc + > > + horizontal_frontporch_byte + > > bllp_wc) % dsi->lanes; > > + if (v_active_roundup) > > + horizontal_backporch_byte = > > horizontal_backporch_byte + > > + dsi->lanes - v_active_roundup; > > + if (bllp_en) { > > + hstx_cklp_wc_max = > > (DIV_ROUND_UP((16 + 6 + 4 + > > + horizontal_backporch_by > > te + bllp_wc + ps_wc), > > + dsi->lanes) + > > da_hs_trail + 1) * dsi->lanes / 6 - 1; > > + } else { > > + hstx_cklp_wc_max = > > (DIV_ROUND_UP((12 + 4 + 4 + > > + horizontal_backporch_by > > te + bllp_wc + ps_wc), > > + dsi->lanes) + > > da_hs_trail + 1) * dsi->lanes / 6 - 1; > > + } > > + } else { > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & > > 0x7fff; > > + horizontal_frontporch_byte = (vm- > > > hfront_porch * > > > > + dsi_tmp_buf_bpp - 12); > > + > > + v_active_roundup = (22 + > > horizontal_backporch_byte + ps_wc + > > + horizontal_frontporch_byte) % > > dsi->lanes; > > + if (v_active_roundup) > > + horizontal_backporch_byte = > > horizontal_backporch_byte + > > + dsi->lanes - v_active_roundup; > > + > > + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + > > 4 + 4 + > > + horizontal_backporch_byte + > > ps_wc), > > + dsi->lanes) + da_hs_trail + 1) > > * dsi->lanes / 6 - 1; > > + } > > + } > > + hstx_cklp_wc = (readl(dsi->regs + DSI_HSTX_CKL_WC) >> > > 2) & 0x3fff; > > Hardware register is set according to software variable, so you could > get this value from software variable. DSI_HSTX_CKL_WC is set in > mtk_dsi_ps_control_vact() as ps_wc, so you could use ps_wc instead of > read it back from register. > > Regards, > CK > > > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > > + hstx_cklp_wc >= hstx_cklp_wc_max) { > > + hstx_cklp_wc = (hstx_cklp_wc_max / 2) << 2; > > + writel(hstx_cklp_wc, dsi->regs + > > DSI_HSTX_CKL_WC); > > + } > > + hstx_cklp_wc = hstx_cklp_wc >> 2; > > + if (hstx_cklp_wc <= hstx_cklp_wc_min || > > + hstx_cklp_wc >= hstx_cklp_wc_max) { > > + DRM_WARN("Wrong setting of hstx_ckl_wc\n"); > > + } > > + > > + lpx = readl(dsi->regs + DSI_PHY_TIMECON0) & 0xff; > > + da_hs_exit = (readl(dsi->regs + DSI_PHY_TIMECON1) >> > > 24) & 0xff; > > + da_hs_prep = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 8) > > & 0xff; > > + da_hs_zero = (readl(dsi->regs + DSI_PHY_TIMECON0) >> > > 16) & 0xff; > > + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; > > + hs_vb_ps_wc = ps_wc - > > + (lpx + da_hs_exit + da_hs_prep + da_hs_zero + > > 2) > > + * dsi->lanes; > > + horizontal_frontporch_byte = (1 << 31) > > + | (hs_vb_ps_wc << 16) > > + | (horizontal_frontporch_byte); > > + } > > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC); > > writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC); > > writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC); > > @@ -1246,6 +1345,7 @@ static const struct mtk_dsi_driver_data > > mt8188_dsi_driver_data = { > > .has_shadow_ctl = true, > > .has_size_ctl = true, > > .cmdq_long_packet_ctl = true, > > + .support_per_frame_lp = true, > > }; > > > > static const struct of_device_id mtk_dsi_of_match[] = {
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index a2fdfc8ddb15..e6f4807c8711 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -83,6 +83,7 @@ #define DSI_HSA_WC 0x50 #define DSI_HBP_WC 0x54 #define DSI_HFP_WC 0x58 +#define DSI_BLLP_WC 0x5C #define DSI_CMDQ_SIZE 0x60 #define CMDQ_SIZE 0x3f @@ -180,6 +181,7 @@ struct mtk_dsi_driver_data { bool has_shadow_ctl; bool has_size_ctl; bool cmdq_long_packet_ctl; + bool support_per_frame_lp; }; struct mtk_dsi { @@ -516,6 +518,103 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes; } + if (dsi->driver_data->support_per_frame_lp) { + unsigned int lpx = 0, da_hs_exit = 0, da_hs_prep = 0, da_hs_trail = 0; + unsigned int da_hs_zero = 0, ps_wc = 0, hs_vb_ps_wc = 0; + u32 bllp_wc, bllp_en, v_active_roundup, hstx_cklp_wc; + u32 hstx_cklp_wc_max, hstx_cklp_wc_min; + + da_hs_trail = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 24) & 0xff; + bllp_en = (readl(dsi->regs + DSI_TXRX_CTRL) >> 7) & 0x1; + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) { + horizontal_sync_active_byte = + (vm->hsync_len * dsi_tmp_buf_bpp - 10); + horizontal_backporch_byte = + (vm->hback_porch * dsi_tmp_buf_bpp - 10); + horizontal_frontporch_byte = + (vm->hfront_porch * dsi_tmp_buf_bpp - 12); + + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; + v_active_roundup = (32 + horizontal_sync_active_byte + + horizontal_backporch_byte + ps_wc + + horizontal_frontporch_byte) % dsi->lanes; + if (v_active_roundup) + horizontal_backporch_byte = horizontal_backporch_byte + + dsi->lanes - v_active_roundup; + hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 + + horizontal_sync_active_byte), dsi->lanes) + da_hs_trail + 1) + * dsi->lanes / 6 - 1; + hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 + + horizontal_sync_active_byte + horizontal_backporch_byte + + ps_wc), dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; + } else { + horizontal_sync_active_byte = vm->hsync_len * dsi_tmp_buf_bpp - 4; + + horizontal_backporch_byte = (vm->hback_porch + vm->hsync_len) * + dsi_tmp_buf_bpp - 10; + hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi->lanes) + da_hs_trail + 1) + * dsi->lanes / 6 - 1; + + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) { + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; + bllp_wc = readl(dsi->regs + DSI_BLLP_WC) & 0xfff; + horizontal_frontporch_byte = (vm->hfront_porch * + dsi_tmp_buf_bpp - 18); + + v_active_roundup = (28 + horizontal_backporch_byte + ps_wc + + horizontal_frontporch_byte + bllp_wc) % dsi->lanes; + if (v_active_roundup) + horizontal_backporch_byte = horizontal_backporch_byte + + dsi->lanes - v_active_roundup; + if (bllp_en) { + hstx_cklp_wc_max = (DIV_ROUND_UP((16 + 6 + 4 + + horizontal_backporch_byte + bllp_wc + ps_wc), + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; + } else { + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 + + horizontal_backporch_byte + bllp_wc + ps_wc), + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; + } + } else { + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; + horizontal_frontporch_byte = (vm->hfront_porch * + dsi_tmp_buf_bpp - 12); + + v_active_roundup = (22 + horizontal_backporch_byte + ps_wc + + horizontal_frontporch_byte) % dsi->lanes; + if (v_active_roundup) + horizontal_backporch_byte = horizontal_backporch_byte + + dsi->lanes - v_active_roundup; + + hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 + + horizontal_backporch_byte + ps_wc), + dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1; + } + } + hstx_cklp_wc = (readl(dsi->regs + DSI_HSTX_CKL_WC) >> 2) & 0x3fff; + if (hstx_cklp_wc <= hstx_cklp_wc_min || + hstx_cklp_wc >= hstx_cklp_wc_max) { + hstx_cklp_wc = (hstx_cklp_wc_max / 2) << 2; + writel(hstx_cklp_wc, dsi->regs + DSI_HSTX_CKL_WC); + } + hstx_cklp_wc = hstx_cklp_wc >> 2; + if (hstx_cklp_wc <= hstx_cklp_wc_min || + hstx_cklp_wc >= hstx_cklp_wc_max) { + DRM_WARN("Wrong setting of hstx_ckl_wc\n"); + } + + lpx = readl(dsi->regs + DSI_PHY_TIMECON0) & 0xff; + da_hs_exit = (readl(dsi->regs + DSI_PHY_TIMECON1) >> 24) & 0xff; + da_hs_prep = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 8) & 0xff; + da_hs_zero = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 16) & 0xff; + ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff; + hs_vb_ps_wc = ps_wc - + (lpx + da_hs_exit + da_hs_prep + da_hs_zero + 2) + * dsi->lanes; + horizontal_frontporch_byte = (1 << 31) + | (hs_vb_ps_wc << 16) + | (horizontal_frontporch_byte); + } writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC); writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC); writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC); @@ -1246,6 +1345,7 @@ static const struct mtk_dsi_driver_data mt8188_dsi_driver_data = { .has_shadow_ctl = true, .has_size_ctl = true, .cmdq_long_packet_ctl = true, + .support_per_frame_lp = true, }; static const struct of_device_id mtk_dsi_of_match[] = {
Adding the per-frame lp function of mt8188, which can keep HFP in HS and reduce the time required for each line to enter and exit low power. Per Frame LP: |<----------One Active Frame-------->| --______________________________________----___________________ ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^ Per Line LP: |<---------------One Active Frame----------->| --______________--______________--______________----______________ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> --- drivers/gpu/drm/mediatek/mtk_dsi.c | 100 +++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+)