| Message ID | 20240401093843.2591147-3-quic_tengfan@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: qcom: add AIM300 AIoT board support | expand |
On Mon, 1 Apr 2024 at 12:40, Tengfei Fan <quic_tengfan@quicinc.com> wrote: > > QCS8550 is derived from SM8550. The differnece between SM8550 and > QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used > in IoT scenarios. > QCS8550 firmware has different memory map with SM8550 firmware. The > memory map will be runtime added through bootloader. > There are 3 types of reserved memory regions here: > 1. Firmware related regions which aren't shared with kernel. > The device tree source in kernel doesn't need to have node to indicate > the firmware related reserved information. OS bootloader conveys the > information by update device tree in runtime. > This will be described as: UEFI saves the physical address of the > UEFI System Table to dts file's chosen node. Kernel read this table and > add reserved memory regions to efi config table. Current reserved memory > region may have reserved region which was not yet used, release note of > the firmware have such kind of information. > 2. Firmware related memory regions which are shared with Kernel > Each region has a specific node with specific label name for later > phandle reference from other driver dt node. > 3. PIL regions. > PIL regions will be reserved and then assigned to subsystem firmware > later. > Here is a reserved memory map for this platform: > 0x100000000 +------------------+ > | | > | Firmware Related | > | | > 0xd4d00000 +------------------+ > | | > | Kernel Available | > | | > 0xa7000000 +------------------+ > | | > | PIL Region | > | | > 0x8a800000 +------------------+ > | | > | Firmware Related | > | | > 0x80000000 +------------------+ > Note that: > 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up, > it is available for kernel usage. This region is not suggested to be > used by kernel features like ramoops, suspend resume etc. > > Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> > --- > arch/arm64/boot/dts/qcom/qcs8550.dtsi | 169 ++++++++++++++++++++++++++ > 1 file changed, 169 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs8550.dtsi Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Minor nit below. > > diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi > new file mode 100644 > index 000000000000..a3ebf3d4e16d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi > @@ -0,0 +1,169 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include "sm8550.dtsi" > + > +/delete-node/ &reserved_memory; > + > +/ { > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + > + /* These are 3 types of reserved memory regions here: > + * 1. Firmware related regions which aren't shared with kernel. > + * The device tree source in kernel doesn't need to have node to > + * indicate the firmware related reserved information. OS bootloader > + * conveys the information by update device tree in runtime. > + * This will be described as: UEFI saves the physical address of > + * the UEFI System Table to dts file's chosen node. Kernel read this > + * table and add reserved memory regions to efi config table. Current > + * reserved memory region may have reserved region which was not yet > + * used, release note of the firmware have such kind of information. > + * 2. Firmware related memory regions which are shared with Kernel. > + * Each region has a specific node with specific label name for > + * later phandle reference from other driver dt node. > + * 3. PIL regions. > + * PIL regions will be reserved and then assigned to subsystem > + * firmware later. > + * Here is a reserved memory map for this platform: > + * 0x100000000 +------------------+ > + * | | > + * | Firmware Related | > + * | | > + * 0xd4d00000 +------------------+ > + * | | > + * | Kernel Available | > + * | | > + * 0xa7000000 +------------------+ > + * | | > + * | PIL Region | > + * | | > + * 0x8a800000 +------------------+ > + * | | > + * | Firmware Related | > + * | | > + * 0x80000000 +------------------+ > + * Note that: > + * 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up, > + * it is available for kernel usage. This region is not suggested to > + * be used by kernel features like ramoops, suspend resume etc. > + */ > + > + /* > + * Firmware related regions, bootlader will possible reserve parts of > + * region from 0x80000000..0x8a800000. > + */ > + aop_image_mem: aop-image-region@81c00000 { > + reg = <0x0 0x81c00000 0x0 0x60000>; > + no-map; > + }; > + > + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { > + compatible = "qcom,cmd-db"; > + reg = <0x0 0x81c60000 0x0 0x20000>; > + no-map; > + }; > + > + aop_config_mem: aop-config-region@81c80000 { > + no-map; > + reg = <0x0 0x81c80000 0x0 0x20000>; > + }; > + > + smem_mem: smem-region@81d00000 { > + compatible = "qcom,smem"; > + reg = <0x0 0x81d00000 0x0 0x200000>; > + hwlocks = <&tcsr_mutex 3>; > + no-map; > + }; > + > + adsp_mhi_mem: adsp-mhi-region@81f00000 { > + reg = <0x0 0x81f00000 0x0 0x20000>; > + no-map; > + }; > + > + /* PIL region */ > + mpss_mem: mpss-region@8a800000 { > + reg = <0x0 0x8a800000 0x0 0x10800000>; > + no-map; > + }; > + > + q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 { > + reg = <0x0 0x9b000000 0x0 0x80000>; > + no-map; > + }; > + > + ipa_fw_mem: ipa-fw-region@9b080000 { > + reg = <0x0 0x9b080000 0x0 0x10000>; > + no-map; > + }; > + > + ipa_gsi_mem: ipa-gsi-region@9b090000 { > + reg = <0x0 0x9b090000 0x0 0xa000>; > + no-map; > + }; > + > + gpu_micro_code_mem: gpu-micro-code-region@9b09a000 { > + reg = <0x0 0x9b09a000 0x0 0x2000>; > + no-map; > + }; > + > + spss_region_mem: spss-region@9b100000 { > + reg = <0x0 0x9b100000 0x0 0x180000>; > + no-map; > + }; > + > + spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 { > + reg = <0x0 0x9b280000 0x0 0x80000>; > + no-map; > + }; > + > + camera_mem: camera-region@9b300000 { > + reg = <0x0 0x9b300000 0x0 0x800000>; > + no-map; > + }; > + > + video_mem: video-region@9bb00000 { > + reg = <0x0 0x9bb00000 0x0 0x700000>; > + no-map; > + }; > + > + cvp_mem: cvp-region@9c200000 { > + reg = <0x0 0x9c200000 0x0 0x700000>; > + no-map; > + }; > + > + cdsp_mem: cdsp-region@9c900000 { > + reg = <0x0 0x9c900000 0x0 0x2000000>; > + no-map; > + }; > + > + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 { > + reg = <0x0 0x9e900000 0x0 0x80000>; > + no-map; > + }; > + > + q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 { > + reg = <0x0 0x9e980000 0x0 0x80000>; > + no-map; > + }; > + > + adspslpi_mem: adspslpi-region@9ea00000 { > + reg = <0x0 0x9ea00000 0x0 0x4080000>; > + no-map; > + }; > + > + /* > + * Firmware related regions, bootlader will possible reserve parts of Nit: bootloader will possibly... > + * region from 0xd8000000..0x100000000. > + */ > + mpss_dsm_mem: mpss_dsm_region@d4d00000 { > + reg = <0x0 0xd4d00000 0x0 0x3300000>; > + no-map; > + }; > + }; > +}; > -- > 2.25.1 > >
diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi new file mode 100644 index 000000000000..a3ebf3d4e16d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sm8550.dtsi" + +/delete-node/ &reserved_memory; + +/ { + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + + /* These are 3 types of reserved memory regions here: + * 1. Firmware related regions which aren't shared with kernel. + * The device tree source in kernel doesn't need to have node to + * indicate the firmware related reserved information. OS bootloader + * conveys the information by update device tree in runtime. + * This will be described as: UEFI saves the physical address of + * the UEFI System Table to dts file's chosen node. Kernel read this + * table and add reserved memory regions to efi config table. Current + * reserved memory region may have reserved region which was not yet + * used, release note of the firmware have such kind of information. + * 2. Firmware related memory regions which are shared with Kernel. + * Each region has a specific node with specific label name for + * later phandle reference from other driver dt node. + * 3. PIL regions. + * PIL regions will be reserved and then assigned to subsystem + * firmware later. + * Here is a reserved memory map for this platform: + * 0x100000000 +------------------+ + * | | + * | Firmware Related | + * | | + * 0xd4d00000 +------------------+ + * | | + * | Kernel Available | + * | | + * 0xa7000000 +------------------+ + * | | + * | PIL Region | + * | | + * 0x8a800000 +------------------+ + * | | + * | Firmware Related | + * | | + * 0x80000000 +------------------+ + * Note that: + * 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up, + * it is available for kernel usage. This region is not suggested to + * be used by kernel features like ramoops, suspend resume etc. + */ + + /* + * Firmware related regions, bootlader will possible reserve parts of + * region from 0x80000000..0x8a800000. + */ + aop_image_mem: aop-image-region@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config-region@81c80000 { + no-map; + reg = <0x0 0x81c80000 0x0 0x20000>; + }; + + smem_mem: smem-region@81d00000 { + compatible = "qcom,smem"; + reg = <0x0 0x81d00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi-region@81f00000 { + reg = <0x0 0x81f00000 0x0 0x20000>; + no-map; + }; + + /* PIL region */ + mpss_mem: mpss-region@8a800000 { + reg = <0x0 0x8a800000 0x0 0x10800000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 { + reg = <0x0 0x9b000000 0x0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw-region@9b080000 { + reg = <0x0 0x9b080000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi-region@9b090000 { + reg = <0x0 0x9b090000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code-region@9b09a000 { + reg = <0x0 0x9b09a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: spss-region@9b100000 { + reg = <0x0 0x9b100000 0x0 0x180000>; + no-map; + }; + + spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 { + reg = <0x0 0x9b280000 0x0 0x80000>; + no-map; + }; + + camera_mem: camera-region@9b300000 { + reg = <0x0 0x9b300000 0x0 0x800000>; + no-map; + }; + + video_mem: video-region@9bb00000 { + reg = <0x0 0x9bb00000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp-region@9c200000 { + reg = <0x0 0x9c200000 0x0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0x0 0x9c900000 0x0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 { + reg = <0x0 0x9e900000 0x0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 { + reg = <0x0 0x9e980000 0x0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi-region@9ea00000 { + reg = <0x0 0x9ea00000 0x0 0x4080000>; + no-map; + }; + + /* + * Firmware related regions, bootlader will possible reserve parts of + * region from 0xd8000000..0x100000000. + */ + mpss_dsm_mem: mpss_dsm_region@d4d00000 { + reg = <0x0 0xd4d00000 0x0 0x3300000>; + no-map; + }; + }; +};
QCS8550 is derived from SM8550. The differnece between SM8550 and QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used in IoT scenarios. QCS8550 firmware has different memory map with SM8550 firmware. The memory map will be runtime added through bootloader. There are 3 types of reserved memory regions here: 1. Firmware related regions which aren't shared with kernel. The device tree source in kernel doesn't need to have node to indicate the firmware related reserved information. OS bootloader conveys the information by update device tree in runtime. This will be described as: UEFI saves the physical address of the UEFI System Table to dts file's chosen node. Kernel read this table and add reserved memory regions to efi config table. Current reserved memory region may have reserved region which was not yet used, release note of the firmware have such kind of information. 2. Firmware related memory regions which are shared with Kernel Each region has a specific node with specific label name for later phandle reference from other driver dt node. 3. PIL regions. PIL regions will be reserved and then assigned to subsystem firmware later. Here is a reserved memory map for this platform: 0x100000000 +------------------+ | | | Firmware Related | | | 0xd4d00000 +------------------+ | | | Kernel Available | | | 0xa7000000 +------------------+ | | | PIL Region | | | 0x8a800000 +------------------+ | | | Firmware Related | | | 0x80000000 +------------------+ Note that: 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up, it is available for kernel usage. This region is not suggested to be used by kernel features like ramoops, suspend resume etc. Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> --- arch/arm64/boot/dts/qcom/qcs8550.dtsi | 169 ++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcs8550.dtsi