| Message ID | 20240401145114.1699451-1-frut3k7@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | c278ec644377249aba5b1e1ca2b5705fd1c0132c |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,v2] net: phy: aquantia: add support for AQR114C PHY ID | expand |
On Mon, Apr 01, 2024 at 04:51:06PM +0200, Paweł Owoc wrote: > Add support for AQR114C PHY ID. This PHY advertise 10G speed: > SPEED(0x04): 0x6031 > capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10 > +100 +1000 -10-ts -2-tl +10g > EXTABLE(0x0B): 0x40fc > capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx > +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g > +2.5g/5g -1000-h > > but supports only up to 5G speed (as with AQR111/111B0). > AQR111 init config is used to set max speed 5G. > > Signed-off-by: Paweł Owoc <frut3k7@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Mon, 1 Apr 2024 16:51:06 +0200 you wrote: > Add support for AQR114C PHY ID. This PHY advertise 10G speed: > SPEED(0x04): 0x6031 > capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10 > +100 +1000 -10-ts -2-tl +10g > EXTABLE(0x0B): 0x40fc > capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx > +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g > +2.5g/5g -1000-h > > [...] Here is the summary with links: - [net-next,v2] net: phy: aquantia: add support for AQR114C PHY ID https://git.kernel.org/netdev/net-next/c/c278ec644377 You are awesome, thank you!
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c index 71bfddb8f453..d34cdec47636 100644 --- a/drivers/net/phy/aquantia/aquantia_main.c +++ b/drivers/net/phy/aquantia/aquantia_main.c @@ -28,6 +28,7 @@ #define PHY_ID_AQR412 0x03a1b712 #define PHY_ID_AQR113 0x31c31c40 #define PHY_ID_AQR113C 0x31c31c12 +#define PHY_ID_AQR114C 0x31c31c22 #define PHY_ID_AQR813 0x31c31cb2 #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 @@ -962,6 +963,25 @@ static struct phy_driver aqr_driver[] = { .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, }, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR114C), + .name = "Aquantia AQR114C", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr111_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, +}, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813), .name = "Aquantia AQR813", @@ -999,6 +1019,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, { } };
Add support for AQR114C PHY ID. This PHY advertise 10G speed: SPEED(0x04): 0x6031 capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10 +100 +1000 -10-ts -2-tl +10g EXTABLE(0x0B): 0x40fc capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g +2.5g/5g -1000-h but supports only up to 5G speed (as with AQR111/111B0). AQR111 init config is used to set max speed 5G. Signed-off-by: Paweł Owoc <frut3k7@gmail.com> --- drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)