mbox series

[v2,0/3] Add support for Emcraft Systems NavQ+ kit

Message ID 20240330133410.41408-1-gilles.talis@gmail.com (mailing list archive)
Headers show
Series Add support for Emcraft Systems NavQ+ kit | expand

Message

Gilles Talis March 30, 2024, 1:34 p.m. UTC 
Hello

This series adds a device tree file for the Emcraft Systems NavQ+ kit [1]

The first patch adds a new vendor prefix for Emcraft Systems
The second one adds the board to the arm/fsl.yaml DT bindings.
Last patch adds device tree file for the kit.

[1] https://www.emcraft.com/products/1222

Changes in v2:
- Add Acked-by review tags
- Fixed device tree warnings reported by dtbs_check
- Reworked leds node
- Remove unused i2c6 pinctrl entry
- Removed unused regulator node in Ethernet entry
- Link to v1: https://lore.kernel.org/imx/20240328202320.187596-1-gilles.talis@gmail.com/
---
Gilles Talis (3):
  dt-bindings: vendor-prefixes: Add Emcraft Systems
  dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
  arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/imx8mp-navqp.dts | 424 ++++++++++++++++++
 4 files changed, 428 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-navqp.dts


base-commit: 4cece764965020c22cff7665b18a012006359095

Comments

Shawn Guo April 3, 2024, 1:15 a.m. UTC | #1 
On Sat, Mar 30, 2024 at 09:34:07AM -0400, Gilles Talis wrote:
> Hello
> 
> This series adds a device tree file for the Emcraft Systems NavQ+ kit [1]
> 
> The first patch adds a new vendor prefix for Emcraft Systems
> The second one adds the board to the arm/fsl.yaml DT bindings.
> Last patch adds device tree file for the kit.
> 
> [1] https://www.emcraft.com/products/1222
> 
> Changes in v2:
> - Add Acked-by review tags
> - Fixed device tree warnings reported by dtbs_check
> - Reworked leds node
> - Remove unused i2c6 pinctrl entry
> - Removed unused regulator node in Ethernet entry
> - Link to v1: https://lore.kernel.org/imx/20240328202320.187596-1-gilles.talis@gmail.com/
> ---
> Gilles Talis (3):
>   dt-bindings: vendor-prefixes: Add Emcraft Systems
>   dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
>   arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit

Applied all, thanks!