@@ -459,4 +459,9 @@ extern int bpf_iter_css_new(struct bpf_iter_css *it,
extern struct cgroup_subsys_state *bpf_iter_css_next(struct bpf_iter_css *it) __weak __ksym;
extern void bpf_iter_css_destroy(struct bpf_iter_css *it) __weak __ksym;
+extern int bpf_timer_set_sleepable_cb_impl(struct bpf_timer *timer,
+ int (callback_fn)(void *map, int *key, struct bpf_timer *timer),
+ void *aux__ign) __ksym;
+#define bpf_timer_set_sleepable_cb(timer, cb) \
+ bpf_timer_set_sleepable_cb_impl(timer, cb, NULL)
#endif
@@ -494,6 +494,10 @@ __bpf_kfunc static u32 bpf_kfunc_call_test_static_unused_arg(u32 arg, u32 unused
return arg;
}
+__bpf_kfunc void bpf_kfunc_call_test_sleepable(void)
+{
+}
+
BTF_KFUNCS_START(bpf_testmod_check_kfunc_ids)
BTF_ID_FLAGS(func, bpf_testmod_test_mod_kfunc)
BTF_ID_FLAGS(func, bpf_kfunc_call_test1)
@@ -520,6 +524,7 @@ BTF_ID_FLAGS(func, bpf_kfunc_call_test_ref, KF_TRUSTED_ARGS | KF_RCU)
BTF_ID_FLAGS(func, bpf_kfunc_call_test_destructive, KF_DESTRUCTIVE)
BTF_ID_FLAGS(func, bpf_kfunc_call_test_static_unused_arg)
BTF_ID_FLAGS(func, bpf_kfunc_call_test_offset)
+BTF_ID_FLAGS(func, bpf_kfunc_call_test_sleepable, KF_SLEEPABLE)
BTF_KFUNCS_END(bpf_testmod_check_kfunc_ids)
static int bpf_testmod_ops_init(struct btf *btf)
@@ -96,6 +96,7 @@ void bpf_kfunc_call_test_pass2(struct prog_test_pass2 *p) __ksym;
void bpf_kfunc_call_test_mem_len_fail2(__u64 *mem, int len) __ksym;
void bpf_kfunc_call_test_destructive(void) __ksym;
+void bpf_kfunc_call_test_sleepable(void) __ksym;
void bpf_kfunc_call_test_offset(struct prog_test_ref_kfunc *p);
struct prog_test_member *bpf_kfunc_call_memb_acquire(void);
@@ -3,6 +3,7 @@
#include <test_progs.h>
#include "timer.skel.h"
#include "timer_failure.skel.h"
+#include "timer_sleepable.skel.h"
#define NUM_THR 8
@@ -95,3 +96,36 @@ void serial_test_timer(void)
RUN_TESTS(timer_failure);
}
+
+/* isolate sleepable tests from main timer tests
+ * because if test_timer fails, it spews the console
+ * with 10000 * 5 "spin_lock_thread:PASS:test_run_opts retval 0 nsec"
+ */
+void serial_test_sleepable_timer(void)
+{
+ struct timer_sleepable *timer_sleepable_skel = NULL;
+ int err, prog_fd;
+
+ LIBBPF_OPTS(bpf_test_run_opts, topts);
+
+ RUN_TESTS(timer_sleepable);
+
+ /* re-run the success test to check if the timer was actually executed */
+
+ timer_sleepable_skel = timer_sleepable__open_and_load();
+ if (!ASSERT_OK_PTR(timer_sleepable_skel, "timer_sleepable_skel_load"))
+ return;
+
+ err = timer_sleepable__attach(timer_sleepable_skel);
+ if (!ASSERT_OK(err, "timer_sleepable_attach"))
+ return;
+
+ prog_fd = bpf_program__fd(timer_sleepable_skel->progs.test_syscall_sleepable);
+ err = bpf_prog_test_run_opts(prog_fd, &topts);
+ ASSERT_OK(err, "test_run");
+ ASSERT_EQ(topts.retval, 0, "test_run");
+
+ usleep(50); /* 10 usecs should be enough, but give it extra */
+
+ ASSERT_EQ(timer_sleepable_skel->bss->ok_sleepable, 1, "ok_sleepable");
+}
new file mode 100644
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2021 Facebook
+ * Copyright (c) 2024 Benjamin Tissoires
+ */
+
+#include "bpf_experimental.h"
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+#include "../bpf_testmod/bpf_testmod_kfunc.h"
+
+char _license[] SEC("license") = "GPL";
+
+#define CLOCK_MONOTONIC 1
+
+struct elem {
+ struct bpf_timer t;
+};
+
+struct {
+ __uint(type, BPF_MAP_TYPE_ARRAY);
+ __uint(max_entries, 3);
+ __type(key, int);
+ __type(value, struct elem);
+} timer_map SEC(".maps");
+
+__u32 ok_sleepable;
+
+/* callback for sleepable timer */
+static int timer_cb_sleepable(void *map, int *key, struct bpf_timer *timer)
+{
+ bpf_kfunc_call_test_sleepable();
+ ok_sleepable |= (1 << *key);
+ return 0;
+}
+
+SEC("tc")
+/* check that calling bpf_timer_start() with BPF_F_TIMER_SLEEPABLE on a sleepable
+ * callback works
+ */
+__retval(0)
+long test_call_sleepable(void *ctx)
+{
+ int key = 0;
+ struct bpf_timer *timer;
+
+ if (ok_sleepable & 1)
+ return -1;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (timer) {
+ if (bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC | BPF_F_TIMER_SLEEPABLE) != 0)
+ return -2;
+ bpf_timer_set_sleepable_cb(timer, timer_cb_sleepable);
+ if (bpf_timer_start(timer, 0, 0))
+ return -3;
+ } else {
+ return -4;
+ }
+
+ return 0;
+}
+
+SEC("syscall")
+/* check that calling bpf_timer_start() with BPF_F_TIMER_SLEEPABLE on a sleepable
+ * callback works.
+ */
+__retval(0)
+long test_syscall_sleepable(void *ctx)
+{
+ int key = 0;
+ struct bpf_timer *timer;
+
+ if (ok_sleepable & 1)
+ return -1;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (timer) {
+ if (bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC | BPF_F_TIMER_SLEEPABLE) != 0)
+ return -2;
+ bpf_timer_set_sleepable_cb(timer, timer_cb_sleepable);
+ if (bpf_timer_start(timer, 0, 0))
+ return -3;
+ } else {
+ return -4;
+ }
+
+ return 0;
+}
+
+SEC("?tc")
+__log_level(2)
+__failure
+/* check that bpf_timer_set_callback() can not be called with a
+ * sleepable callback
+ */
+__msg("mark_precise: frame0: regs=r1 stack= before")
+__msg(": (85) call bpf_kfunc_call_test_sleepable#") /* anchor message */
+__msg("program must be sleepable to call sleepable kfunc bpf_kfunc_call_test_sleepable")
+long test_non_sleepable_sleepable_callback(void *ctx)
+{
+ int key = 0;
+ struct bpf_timer *timer;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (timer) {
+ bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC | BPF_F_TIMER_SLEEPABLE);
+ bpf_timer_set_callback(timer, timer_cb_sleepable);
+ bpf_timer_start(timer, 0, 0);
+ }
+
+ return 0;
+}
+
+SEC("tc")
+/* check that calling bpf_timer_set_sleepable_cb() without a sleepable timer
+ * initialized with BPF_F_TIMER_SLEEPABLE on a sleepable
+ * callback is returning -EINVAL
+ */
+__retval(3)
+long test_call_sleepable_missing_flag(void *ctx)
+{
+ int key = 1;
+ struct bpf_timer *timer;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (!timer)
+ return 1;
+
+ if (bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC))
+ return 2;
+
+ if (bpf_timer_set_sleepable_cb(timer, timer_cb_sleepable))
+ return 3;
+
+ return bpf_timer_start(timer, 0, 0);
+}
+
+SEC("tc")
+/* check that calling bpf_timer_start() with a delay on a sleepable
+ * callback is returning -EINVAL
+ */
+__retval(-22)
+long test_call_sleepable_delay(void *ctx)
+{
+ int key = 2;
+ struct bpf_timer *timer;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (!timer)
+ return 1;
+
+ if (bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC | BPF_F_TIMER_SLEEPABLE))
+ return 2;
+
+ if (bpf_timer_set_sleepable_cb(timer, timer_cb_sleepable))
+ return 3;
+
+ return bpf_timer_start(timer, 1, 0);
+}
+
+SEC("?tc")
+__log_level(2)
+__failure
+/* check that the first argument of bpf_timer_set_callback()
+ * is a correct bpf_timer pointer.
+ */
+__msg("mark_precise: frame0: regs=r1 stack= before")
+__msg(": (85) call bpf_timer_set_sleepable_cb_impl#") /* anchor message */
+__msg("arg#0 doesn't point to a map value")
+long test_wrong_pointer(void *ctx)
+{
+ int key = 0;
+ struct bpf_timer *timer;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (!timer)
+ return 1;
+
+ if (bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC | BPF_F_TIMER_SLEEPABLE))
+ return 2;
+
+ if (bpf_timer_set_sleepable_cb((void *)&timer, timer_cb_sleepable))
+ return 3;
+
+ return -22;
+}
+
+SEC("?tc")
+__log_level(2)
+__failure
+/* check that the first argument of bpf_timer_set_callback()
+ * is a correct bpf_timer pointer.
+ */
+__msg("mark_precise: frame0: regs=r1 stack= before")
+__msg(": (85) call bpf_timer_set_sleepable_cb_impl#") /* anchor message */
+__msg("off 1 doesn't point to 'struct bpf_timer' that is at 0")
+long test_wrong_pointer_offset(void *ctx)
+{
+ int key = 0;
+ struct bpf_timer *timer;
+
+ timer = bpf_map_lookup_elem(&timer_map, &key);
+ if (!timer)
+ return 1;
+
+ if (bpf_timer_init(timer, &timer_map, CLOCK_MONOTONIC | BPF_F_TIMER_SLEEPABLE))
+ return 2;
+
+ if (bpf_timer_set_sleepable_cb((void *)timer + 1, timer_cb_sleepable))
+ return 3;
+
+ return -22;
+}
bpf_experimental.h and ../bpf_testmod/bpf_testmod_kfunc.h are both including vmlinux.h, which is not compatible with including time.h or bpf_tcp_helpers.h. So keep sleepable tests in a separate bpf source file. The first correct test is run twice for convenience: - first through RUN_TESTS - then we ensure that the timer was actually executed, in a manual load/attach/run Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> --- changes in v6: - use of new _init API with BPF_F_TIMER_SLEEPABLE changes in v5b: - do not use SEC(syscall) as they are run in a sleepable context already - duplicate test_call_sleepable() so we can test if the callback gets called changes in v5: - keep sleepable test separate new in v4 --- tools/testing/selftests/bpf/bpf_experimental.h | 5 + .../selftests/bpf/bpf_testmod/bpf_testmod.c | 5 + .../selftests/bpf/bpf_testmod/bpf_testmod_kfunc.h | 1 + tools/testing/selftests/bpf/prog_tests/timer.c | 34 ++++ .../testing/selftests/bpf/progs/timer_sleepable.c | 213 +++++++++++++++++++++ 5 files changed, 258 insertions(+)