| Message ID | 20240410084201.1481930-2-schnelle@linux.ibm.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | watchdog: Handle HAS_IOPORT dependencies | expand |
On Wed, Apr 10, 2024 at 10:42:01AM +0200, Niklas Schnelle wrote: > In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at > compile time. We thus need to add HAS_IOPORT as dependency for those > drivers using them. > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > --- > Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes > and may be merged via subsystem specific trees at your earliest > convenience. > For almost all of those, the HAS_IOPORT "dependency" is really only necessary due to COMPILE_TEST because both ARM and X86 select HAS_IOPORT. Has anyone thought about introducing something like COMPILE_TEST_IOPORT or similar ? config COMPILE_TEST_IOPORT def_bool COMPILE_TEST && HAS_IOPORT Thanks, Guenter > drivers/watchdog/Kconfig | 58 +++++++++++++++++++++------------------- > 1 file changed, 30 insertions(+), 28 deletions(-) > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 6bee137cfbe0..1904896376b7 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -482,6 +482,7 @@ config 21285_WATCHDOG > config 977_WATCHDOG > tristate "NetWinder WB83C977 watchdog" > depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST) > + depends on HAS_IOPORT > help > Say Y here to include support for the WB977 watchdog included in > NetWinder machines. Alternatively say M to compile the driver as > @@ -1075,7 +1076,7 @@ config ACQUIRE_WDT > > config ADVANTECH_WDT > tristate "Advantech SBC Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > If you are configuring a Linux kernel for the Advantech single-board > computer, say `Y' here to support its built-in watchdog timer > @@ -1084,7 +1085,7 @@ config ADVANTECH_WDT > > config ADVANTECH_EC_WDT > tristate "Advantech Embedded Controller Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > select ISA_BUS_API > select WATCHDOG_CORE > help > @@ -1117,7 +1118,7 @@ config ALIM7101_WDT > > config EBC_C384_WDT > tristate "WinSystems EBC-C384 Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > select ISA_BUS_API > select WATCHDOG_CORE > help > @@ -1127,7 +1128,7 @@ config EBC_C384_WDT > > config EXAR_WDT > tristate "Exar Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > select WATCHDOG_CORE > help > Enables watchdog timer support for the watchdog timer present > @@ -1138,7 +1139,7 @@ config EXAR_WDT > > config F71808E_WDT > tristate "Fintek F718xx, F818xx Super I/O Watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog on the Fintek F71808E, > @@ -1150,7 +1151,7 @@ config F71808E_WDT > > config SP5100_TCO > tristate "AMD/ATI SP5100 TCO Timer/Watchdog" > - depends on (X86 || COMPILE_TEST) && PCI > + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT > select WATCHDOG_CORE > help > Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO > @@ -1189,7 +1190,7 @@ config SC520_WDT > > config SBC_FITPC2_WATCHDOG > tristate "Compulab SBC-FITPC2 watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the built-in watchdog timer on the fit-PC2, > fit-PC2i, CM-iAM single-board computers made by Compulab. > @@ -1214,7 +1215,7 @@ config SBC_FITPC2_WATCHDOG > > config EUROTECH_WDT > tristate "Eurotech CPU-1220/1410 Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > Enable support for the watchdog timer on the Eurotech CPU-1220 and > CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product > @@ -1222,7 +1223,7 @@ config EUROTECH_WDT > > config IB700_WDT > tristate "IB700 SBC Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the hardware watchdog on the IB700 Single > Board Computer produced by TMC Technology (www.tmc-uk.com). This > @@ -1239,7 +1240,7 @@ config IB700_WDT > > config IBMASR > tristate "IBM Automatic Server Restart" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the IBM Automatic Server Restart watchdog > timer built-in into some eServer xSeries machines. > @@ -1249,7 +1250,7 @@ config IBMASR > > config WAFER_WDT > tristate "ICP Single Board Computer Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is a driver for the hardware watchdog on the ICP Single > Board Computer. This driver is working on (at least) the following > @@ -1271,7 +1272,7 @@ config I6300ESB_WDT > > config IE6XX_WDT > tristate "Intel Atom E6xx Watchdog" > - depends on (X86 || COMPILE_TEST) && PCI > + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT > select WATCHDOG_CORE > select MFD_CORE > select LPC_SCH > @@ -1301,6 +1302,7 @@ config ITCO_WDT > select WATCHDOG_CORE > depends on I2C || I2C=n > depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT > + depends on HAS_IOPORT # for I2C_I801 > select LPC_ICH if !EXPERT > select I2C_I801 if !EXPERT && I2C > help > @@ -1331,7 +1333,7 @@ config ITCO_VENDOR_SUPPORT > > config IT8712F_WDT > tristate "IT8712F (Smart Guardian) Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the built-in watchdog timer on the IT8712F > Super I/0 chipset used on many motherboards. > @@ -1344,7 +1346,7 @@ config IT8712F_WDT > > config IT87_WDT > tristate "IT87 Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog on the ITE IT8607, > @@ -1392,7 +1394,7 @@ config KEMPLD_WDT > > config SC1200_WDT > tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is a driver for National Semiconductor PC87307/PC97307 hardware > watchdog cards as found on the SC1200. This watchdog is mainly used > @@ -1415,7 +1417,7 @@ config SCx200_WDT > > config PC87413_WDT > tristate "NS PC87413 watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the hardware watchdog on the PC87413 chipset > This watchdog simply watches your kernel to make sure it doesn't > @@ -1429,7 +1431,7 @@ config PC87413_WDT > > config NV_TCO > tristate "nVidia TCO Timer/Watchdog" > - depends on (X86 || COMPILE_TEST) && PCI > + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT > help > Hardware driver for the TCO timer built into the nVidia Hub family > (such as the MCP51). The TCO (Total Cost of Ownership) timer is a > @@ -1458,7 +1460,7 @@ config RDC321X_WDT > > config 60XX_WDT > tristate "SBC-60XX Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This driver can be used with the watchdog timer found on some > single board computers, namely the 6010 PII based computer. > @@ -1498,7 +1500,7 @@ config SBC7240_WDT > > config CPU5_WDT > tristate "SMA CPU5 Watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > TBD. > To compile this driver as a module, choose M here: the > @@ -1506,7 +1508,7 @@ config CPU5_WDT > > config SMSC_SCH311X_WDT > tristate "SMSC SCH311X Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the hardware watchdog timer on the > SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset > @@ -1518,7 +1520,7 @@ config SMSC_SCH311X_WDT > > config SMSC37B787_WDT > tristate "Winbond SMsC37B787 Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the hardware watchdog component on the > Winbond SMsC37B787 chipset as used on the NetRunner Mainboard > @@ -1564,7 +1566,7 @@ config VIA_WDT > > config W83627HF_WDT > tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog on the following > @@ -1594,7 +1596,7 @@ config W83627HF_WDT > > config W83877F_WDT > tristate "W83877F (EMACS) Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the hardware watchdog on the W83877F chipset > as used in EMACS PC-104 motherboards (and likely others). This > @@ -1609,7 +1611,7 @@ config W83877F_WDT > > config W83977F_WDT > tristate "W83977F (PCM-5335) Watchdog Timer" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the hardware watchdog on the W83977F I/O chip > as used in AAEON's PCM-5335 SBC (and likely others). This > @@ -1622,7 +1624,7 @@ config W83977F_WDT > > config MACHZ_WDT > tristate "ZF MachZ Watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > If you are using a ZF Micro MachZ processor, say Y here, otherwise > N. This is the driver for the watchdog timer built-in on that > @@ -1635,7 +1637,7 @@ config MACHZ_WDT > > config SBC_EPX_C3_WATCHDOG > tristate "Winsystems SBC EPX-C3 watchdog" > - depends on X86 || COMPILE_TEST > + depends on (X86 || COMPILE_TEST) && HAS_IOPORT > help > This is the driver for the built-in watchdog timer on the EPX-C3 > Single-board computer made by Winsystems, Inc. > @@ -2197,7 +2199,7 @@ comment "PCI-based Watchdog Cards" > > config PCIPCWATCHDOG > tristate "Berkshire Products PCI-PC Watchdog" > - depends on PCI > + depends on PCI && HAS_IOPORT > help > This is the driver for the Berkshire Products PCI-PC Watchdog card. > This card simply watches your kernel to make sure it doesn't freeze, > @@ -2212,7 +2214,7 @@ config PCIPCWATCHDOG > > config WDTPCI > tristate "PCI-WDT500/501 Watchdog timer" > - depends on PCI > + depends on PCI && HAS_IOPORT > help > If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. > > -- > 2.40.1 >
On Wed, Apr 10, 2024 at 10:42:01AM +0200, Niklas Schnelle wrote: > In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at > compile time. We thus need to add HAS_IOPORT as dependency for those > drivers using them. > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > --- > Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes > and may be merged via subsystem specific trees at your earliest > convenience. Seems like the COMPILE_TEST / HAS_IOPORT problem is watchdog and hwmon specific, so I'll just let it go. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Guenter
On Wed, 2024-04-10 at 07:55 -0700, Guenter Roeck wrote: > On Wed, Apr 10, 2024 at 10:42:01AM +0200, Niklas Schnelle wrote: > > In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at > > compile time. We thus need to add HAS_IOPORT as dependency for those > > drivers using them. > > > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > > Signed-off-by: Arnd Bergmann <arnd@kernel.org> > > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > > --- > > Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes > > and may be merged via subsystem specific trees at your earliest > > convenience. > > Seems like the COMPILE_TEST / HAS_IOPORT problem is watchdog and > hwmon specific, so I'll just let it go. > > Reviewed-by: Guenter Roeck <linux@roeck-us.net> > > Guenter Thank you. What tree should this go via? Thanks, Niklas
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6bee137cfbe0..1904896376b7 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -482,6 +482,7 @@ config 21285_WATCHDOG config 977_WATCHDOG tristate "NetWinder WB83C977 watchdog" depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST) + depends on HAS_IOPORT help Say Y here to include support for the WB977 watchdog included in NetWinder machines. Alternatively say M to compile the driver as @@ -1075,7 +1076,7 @@ config ACQUIRE_WDT config ADVANTECH_WDT tristate "Advantech SBC Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help If you are configuring a Linux kernel for the Advantech single-board computer, say `Y' here to support its built-in watchdog timer @@ -1084,7 +1085,7 @@ config ADVANTECH_WDT config ADVANTECH_EC_WDT tristate "Advantech Embedded Controller Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select ISA_BUS_API select WATCHDOG_CORE help @@ -1117,7 +1118,7 @@ config ALIM7101_WDT config EBC_C384_WDT tristate "WinSystems EBC-C384 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select ISA_BUS_API select WATCHDOG_CORE help @@ -1127,7 +1128,7 @@ config EBC_C384_WDT config EXAR_WDT tristate "Exar Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help Enables watchdog timer support for the watchdog timer present @@ -1138,7 +1139,7 @@ config EXAR_WDT config F71808E_WDT tristate "Fintek F718xx, F818xx Super I/O Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help This is the driver for the hardware watchdog on the Fintek F71808E, @@ -1150,7 +1151,7 @@ config F71808E_WDT config SP5100_TCO tristate "AMD/ATI SP5100 TCO Timer/Watchdog" - depends on (X86 || COMPILE_TEST) && PCI + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT select WATCHDOG_CORE help Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO @@ -1189,7 +1190,7 @@ config SC520_WDT config SBC_FITPC2_WATCHDOG tristate "Compulab SBC-FITPC2 watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the built-in watchdog timer on the fit-PC2, fit-PC2i, CM-iAM single-board computers made by Compulab. @@ -1214,7 +1215,7 @@ config SBC_FITPC2_WATCHDOG config EUROTECH_WDT tristate "Eurotech CPU-1220/1410 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help Enable support for the watchdog timer on the Eurotech CPU-1220 and CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product @@ -1222,7 +1223,7 @@ config EUROTECH_WDT config IB700_WDT tristate "IB700 SBC Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the IB700 Single Board Computer produced by TMC Technology (www.tmc-uk.com). This @@ -1239,7 +1240,7 @@ config IB700_WDT config IBMASR tristate "IBM Automatic Server Restart" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the IBM Automatic Server Restart watchdog timer built-in into some eServer xSeries machines. @@ -1249,7 +1250,7 @@ config IBMASR config WAFER_WDT tristate "ICP Single Board Computer Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is a driver for the hardware watchdog on the ICP Single Board Computer. This driver is working on (at least) the following @@ -1271,7 +1272,7 @@ config I6300ESB_WDT config IE6XX_WDT tristate "Intel Atom E6xx Watchdog" - depends on (X86 || COMPILE_TEST) && PCI + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT select WATCHDOG_CORE select MFD_CORE select LPC_SCH @@ -1301,6 +1302,7 @@ config ITCO_WDT select WATCHDOG_CORE depends on I2C || I2C=n depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT + depends on HAS_IOPORT # for I2C_I801 select LPC_ICH if !EXPERT select I2C_I801 if !EXPERT && I2C help @@ -1331,7 +1333,7 @@ config ITCO_VENDOR_SUPPORT config IT8712F_WDT tristate "IT8712F (Smart Guardian) Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the built-in watchdog timer on the IT8712F Super I/0 chipset used on many motherboards. @@ -1344,7 +1346,7 @@ config IT8712F_WDT config IT87_WDT tristate "IT87 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help This is the driver for the hardware watchdog on the ITE IT8607, @@ -1392,7 +1394,7 @@ config KEMPLD_WDT config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is a driver for National Semiconductor PC87307/PC97307 hardware watchdog cards as found on the SC1200. This watchdog is mainly used @@ -1415,7 +1417,7 @@ config SCx200_WDT config PC87413_WDT tristate "NS PC87413 watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the PC87413 chipset This watchdog simply watches your kernel to make sure it doesn't @@ -1429,7 +1431,7 @@ config PC87413_WDT config NV_TCO tristate "nVidia TCO Timer/Watchdog" - depends on (X86 || COMPILE_TEST) && PCI + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT help Hardware driver for the TCO timer built into the nVidia Hub family (such as the MCP51). The TCO (Total Cost of Ownership) timer is a @@ -1458,7 +1460,7 @@ config RDC321X_WDT config 60XX_WDT tristate "SBC-60XX Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This driver can be used with the watchdog timer found on some single board computers, namely the 6010 PII based computer. @@ -1498,7 +1500,7 @@ config SBC7240_WDT config CPU5_WDT tristate "SMA CPU5 Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help TBD. To compile this driver as a module, choose M here: the @@ -1506,7 +1508,7 @@ config CPU5_WDT config SMSC_SCH311X_WDT tristate "SMSC SCH311X Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset @@ -1518,7 +1520,7 @@ config SMSC_SCH311X_WDT config SMSC37B787_WDT tristate "Winbond SMsC37B787 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog component on the Winbond SMsC37B787 chipset as used on the NetRunner Mainboard @@ -1564,7 +1566,7 @@ config VIA_WDT config W83627HF_WDT tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help This is the driver for the hardware watchdog on the following @@ -1594,7 +1596,7 @@ config W83627HF_WDT config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the W83877F chipset as used in EMACS PC-104 motherboards (and likely others). This @@ -1609,7 +1611,7 @@ config W83877F_WDT config W83977F_WDT tristate "W83977F (PCM-5335) Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the W83977F I/O chip as used in AAEON's PCM-5335 SBC (and likely others). This @@ -1622,7 +1624,7 @@ config W83977F_WDT config MACHZ_WDT tristate "ZF MachZ Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help If you are using a ZF Micro MachZ processor, say Y here, otherwise N. This is the driver for the watchdog timer built-in on that @@ -1635,7 +1637,7 @@ config MACHZ_WDT config SBC_EPX_C3_WATCHDOG tristate "Winsystems SBC EPX-C3 watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the built-in watchdog timer on the EPX-C3 Single-board computer made by Winsystems, Inc. @@ -2197,7 +2199,7 @@ comment "PCI-based Watchdog Cards" config PCIPCWATCHDOG tristate "Berkshire Products PCI-PC Watchdog" - depends on PCI + depends on PCI && HAS_IOPORT help This is the driver for the Berkshire Products PCI-PC Watchdog card. This card simply watches your kernel to make sure it doesn't freeze, @@ -2212,7 +2214,7 @@ config PCIPCWATCHDOG config WDTPCI tristate "PCI-WDT500/501 Watchdog timer" - depends on PCI + depends on PCI && HAS_IOPORT help If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.