diff mbox series

[RESEND,v8,07/10] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset

Message ID 20240410134044.2138310-8-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State New
Headers show
Series watchdog: rzg2l_wdt: Add support for RZ/G3S | expand

Commit Message

Claudiu Beznea April 10, 2024, 1:40 p.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The reset driver has been adapted in commit da235d2fac21
("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
monitor bits before declaring reset asserts/de-asserts as
successful/failure operations. With that, there is no need to keep the
reset workaround for RZ/V2M in place in the watchdog driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---

Changes in v8:
- none

Changes in v7:
- none

Changes in v6:
- none

Changes in v5:
- none

Changes in v4:
- collected tag

Changes in v3:
- none

Changes in v2:
- none

 drivers/watchdog/rzg2l_wdt.c | 39 ++++--------------------------------
 1 file changed, 4 insertions(+), 35 deletions(-)

Comments

Guenter Roeck April 10, 2024, 4:42 p.m. UTC | #1
On Wed, Apr 10, 2024 at 04:40:41PM +0300, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> The reset driver has been adapted in commit da235d2fac21
> ("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
> monitor bits before declaring reset asserts/de-asserts as
> successful/failure operations. With that, there is no need to keep the
> reset workaround for RZ/V2M in place in the watchdog driver.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> 
> Changes in v8:
> - none
> 
> Changes in v7:
> - none
> 
> Changes in v6:
> - none
> 
> Changes in v5:
> - none
> 
> Changes in v4:
> - collected tag
> 
> Changes in v3:
> - none
> 
> Changes in v2:
> - none
> 
>  drivers/watchdog/rzg2l_wdt.c | 39 ++++--------------------------------
>  1 file changed, 4 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
> index 29eb47bcf984..42f1d5d6f07e 100644
> --- a/drivers/watchdog/rzg2l_wdt.c
> +++ b/drivers/watchdog/rzg2l_wdt.c
> @@ -8,7 +8,6 @@
>  #include <linux/clk.h>
>  #include <linux/delay.h>
>  #include <linux/io.h>
> -#include <linux/iopoll.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> @@ -54,35 +53,11 @@ struct rzg2l_wdt_priv {
>  	struct reset_control *rstc;
>  	unsigned long osc_clk_rate;
>  	unsigned long delay;
> -	unsigned long minimum_assertion_period;
>  	struct clk *pclk;
>  	struct clk *osc_clk;
>  	enum rz_wdt_type devtype;
>  };
>  
> -static int rzg2l_wdt_reset(struct rzg2l_wdt_priv *priv)
> -{
> -	int err, status;
> -
> -	if (priv->devtype == WDT_RZV2M) {
> -		/* WDT needs TYPE-B reset control */
> -		err = reset_control_assert(priv->rstc);
> -		if (err)
> -			return err;
> -		ndelay(priv->minimum_assertion_period);
> -		err = reset_control_deassert(priv->rstc);
> -		if (err)
> -			return err;
> -		err = read_poll_timeout(reset_control_status, status,
> -					status != 1, 0, 1000, false,
> -					priv->rstc);
> -	} else {
> -		err = reset_control_reset(priv->rstc);
> -	}
> -
> -	return err;
> -}
> -
>  static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
>  {
>  	/* delay timer when change the setting register */
> @@ -187,13 +162,12 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
>  			     unsigned long action, void *data)
>  {
>  	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +	int ret;
>  
>  	clk_prepare_enable(priv->pclk);
>  	clk_prepare_enable(priv->osc_clk);
>  
>  	if (priv->devtype == WDT_RZG2L) {
> -		int ret;
> -
>  		ret = reset_control_deassert(priv->rstc);
>  		if (ret)
>  			return ret;
> @@ -205,7 +179,9 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
>  		rzg2l_wdt_write(priv, PEEN_FORCE, PEEN);
>  	} else {
>  		/* RZ/V2M doesn't have parity error registers */
> -		rzg2l_wdt_reset(priv);
> +		ret = reset_control_reset(priv->rstc);
> +		if (ret)
> +			return ret;
>  
>  		wdev->timeout = 0;
>  
> @@ -297,13 +273,6 @@ static int rzg2l_wdt_probe(struct platform_device *pdev)
>  
>  	priv->devtype = (uintptr_t)of_device_get_match_data(dev);
>  
> -	if (priv->devtype == WDT_RZV2M) {
> -		priv->minimum_assertion_period = RZV2M_A_NSEC +
> -			3 * F2CYCLE_NSEC(pclk_rate) + 5 *
> -			max(F2CYCLE_NSEC(priv->osc_clk_rate),
> -			    F2CYCLE_NSEC(pclk_rate));
> -	}
> -
>  	pm_runtime_enable(&pdev->dev);
>  
>  	priv->wdev.info = &rzg2l_wdt_ident;
> -- 
> 2.39.2
>
diff mbox series

Patch

diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
index 29eb47bcf984..42f1d5d6f07e 100644
--- a/drivers/watchdog/rzg2l_wdt.c
+++ b/drivers/watchdog/rzg2l_wdt.c
@@ -8,7 +8,6 @@ 
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -54,35 +53,11 @@  struct rzg2l_wdt_priv {
 	struct reset_control *rstc;
 	unsigned long osc_clk_rate;
 	unsigned long delay;
-	unsigned long minimum_assertion_period;
 	struct clk *pclk;
 	struct clk *osc_clk;
 	enum rz_wdt_type devtype;
 };
 
-static int rzg2l_wdt_reset(struct rzg2l_wdt_priv *priv)
-{
-	int err, status;
-
-	if (priv->devtype == WDT_RZV2M) {
-		/* WDT needs TYPE-B reset control */
-		err = reset_control_assert(priv->rstc);
-		if (err)
-			return err;
-		ndelay(priv->minimum_assertion_period);
-		err = reset_control_deassert(priv->rstc);
-		if (err)
-			return err;
-		err = read_poll_timeout(reset_control_status, status,
-					status != 1, 0, 1000, false,
-					priv->rstc);
-	} else {
-		err = reset_control_reset(priv->rstc);
-	}
-
-	return err;
-}
-
 static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
 {
 	/* delay timer when change the setting register */
@@ -187,13 +162,12 @@  static int rzg2l_wdt_restart(struct watchdog_device *wdev,
 			     unsigned long action, void *data)
 {
 	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+	int ret;
 
 	clk_prepare_enable(priv->pclk);
 	clk_prepare_enable(priv->osc_clk);
 
 	if (priv->devtype == WDT_RZG2L) {
-		int ret;
-
 		ret = reset_control_deassert(priv->rstc);
 		if (ret)
 			return ret;
@@ -205,7 +179,9 @@  static int rzg2l_wdt_restart(struct watchdog_device *wdev,
 		rzg2l_wdt_write(priv, PEEN_FORCE, PEEN);
 	} else {
 		/* RZ/V2M doesn't have parity error registers */
-		rzg2l_wdt_reset(priv);
+		ret = reset_control_reset(priv->rstc);
+		if (ret)
+			return ret;
 
 		wdev->timeout = 0;
 
@@ -297,13 +273,6 @@  static int rzg2l_wdt_probe(struct platform_device *pdev)
 
 	priv->devtype = (uintptr_t)of_device_get_match_data(dev);
 
-	if (priv->devtype == WDT_RZV2M) {
-		priv->minimum_assertion_period = RZV2M_A_NSEC +
-			3 * F2CYCLE_NSEC(pclk_rate) + 5 *
-			max(F2CYCLE_NSEC(priv->osc_clk_rate),
-			    F2CYCLE_NSEC(pclk_rate));
-	}
-
 	pm_runtime_enable(&pdev->dev);
 
 	priv->wdev.info = &rzg2l_wdt_ident;