mbox series

[v7,iwl-next,00/12] Introduce ETH56G PHY model for E825C products

Message ID 20240408111814.404583-14-karol.kolacinski@intel.com (mailing list archive)
Headers show
Series Introduce ETH56G PHY model for E825C products | expand

Message

Karol Kolacinski April 8, 2024, 11:07 a.m. UTC
E825C products have a different PHY model than E822, E823 and E810 products.
This PHY is ETH56G and its support is necessary to have functional PTP stack
for E825C products.

Grzegorz Nitka (2):
  ice: Add NAC Topology device capability parser
  ice: Adjust PTP init for 2x50G E825C devices

Jacob Keller (2):
  ice: Introduce helper to get tmr_cmd_reg values
  ice: Introduce ice_get_base_incval() helper

Karol Kolacinski (4):
  ice: Introduce ice_ptp_hw struct
  ice: Add PHY OFFSET_READY register clearing
  ice: Change CGU regs struct to anonymous
  ice: Support 2XNAC configuration using auxbus

Michal Michalik (1):
  ice: Add support for E825-C TS PLL handling

Sergey Temerkhanov (3):
  ice: Implement Tx interrupt enablement functions
  ice: Move CGU block
  ice: Introduce ETH56G PHY model for E825C products

V5 -> V6: Changes in:
          - ice: Move CGU block

V5 -> V6: Changes in:
          - ice: Implement Tx interrupt enablement functions
          - ice: Move CGU block

V4 -> V5: Changes in:
          - ice: Introduce ice_ptp_hw struct
          - ice: Introduce helper to get tmr_cmd_reg values
          - ice: Introduce ice_get_base_incval() helper
          - ice: Introduce ETH56G PHY model for E825C products
          - ice: Add support for E825-C TS PLL handling
          - ice: Adjust PTP init for 2x50G E825C devices

V1 -> V4: Changes in:
          - ice: Introduce ETH56G PHY model for E825C products

 drivers/net/ethernet/intel/ice/ice.h          |   23 +-
 .../net/ethernet/intel/ice/ice_adminq_cmd.h   |    1 +
 drivers/net/ethernet/intel/ice/ice_cgu_regs.h |   77 +-
 drivers/net/ethernet/intel/ice/ice_common.c   |   58 +-
 drivers/net/ethernet/intel/ice/ice_common.h   |    2 +
 .../net/ethernet/intel/ice/ice_hw_autogen.h   |    4 +
 drivers/net/ethernet/intel/ice/ice_ptp.c      |  265 +-
 drivers/net/ethernet/intel/ice/ice_ptp.h      |    1 +
 .../net/ethernet/intel/ice/ice_ptp_consts.h   |  402 ++
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c   | 3594 +++++++++++++----
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h   |  290 +-
 drivers/net/ethernet/intel/ice/ice_sbq_cmd.h  |   10 +-
 drivers/net/ethernet/intel/ice/ice_type.h     |   60 +-
 13 files changed, 3873 insertions(+), 914 deletions(-)


base-commit: c6f2492cda380a8bce00f61c3a4272401fbb9043

Comments

Tony Nguyen April 10, 2024, 9:57 p.m. UTC | #1
On 4/8/2024 4:07 AM, Karol Kolacinski wrote:
> E825C products have a different PHY model than E822, E823 and E810 products.
> This PHY is ETH56G and its support is necessary to have functional PTP stack
> for E825C products.

Some of the latter patches in this series don't compile on 32bit.

Thanks,
Tony

> Grzegorz Nitka (2):
>    ice: Add NAC Topology device capability parser
>    ice: Adjust PTP init for 2x50G E825C devices
> 
> Jacob Keller (2):
>    ice: Introduce helper to get tmr_cmd_reg values
>    ice: Introduce ice_get_base_incval() helper
> 
> Karol Kolacinski (4):
>    ice: Introduce ice_ptp_hw struct
>    ice: Add PHY OFFSET_READY register clearing
>    ice: Change CGU regs struct to anonymous
>    ice: Support 2XNAC configuration using auxbus
> 
> Michal Michalik (1):
>    ice: Add support for E825-C TS PLL handling
> 
> Sergey Temerkhanov (3):
>    ice: Implement Tx interrupt enablement functions
>    ice: Move CGU block
>    ice: Introduce ETH56G PHY model for E825C products
> 
> V5 -> V6: Changes in:
>            - ice: Move CGU block
> 
> V5 -> V6: Changes in:
>            - ice: Implement Tx interrupt enablement functions
>            - ice: Move CGU block
> 
> V4 -> V5: Changes in:
>            - ice: Introduce ice_ptp_hw struct
>            - ice: Introduce helper to get tmr_cmd_reg values
>            - ice: Introduce ice_get_base_incval() helper
>            - ice: Introduce ETH56G PHY model for E825C products
>            - ice: Add support for E825-C TS PLL handling
>            - ice: Adjust PTP init for 2x50G E825C devices
> 
> V1 -> V4: Changes in:
>            - ice: Introduce ETH56G PHY model for E825C products
> 
>   drivers/net/ethernet/intel/ice/ice.h          |   23 +-
>   .../net/ethernet/intel/ice/ice_adminq_cmd.h   |    1 +
>   drivers/net/ethernet/intel/ice/ice_cgu_regs.h |   77 +-
>   drivers/net/ethernet/intel/ice/ice_common.c   |   58 +-
>   drivers/net/ethernet/intel/ice/ice_common.h   |    2 +
>   .../net/ethernet/intel/ice/ice_hw_autogen.h   |    4 +
>   drivers/net/ethernet/intel/ice/ice_ptp.c      |  265 +-
>   drivers/net/ethernet/intel/ice/ice_ptp.h      |    1 +
>   .../net/ethernet/intel/ice/ice_ptp_consts.h   |  402 ++
>   drivers/net/ethernet/intel/ice/ice_ptp_hw.c   | 3594 +++++++++++++----
>   drivers/net/ethernet/intel/ice/ice_ptp_hw.h   |  290 +-
>   drivers/net/ethernet/intel/ice/ice_sbq_cmd.h  |   10 +-
>   drivers/net/ethernet/intel/ice/ice_type.h     |   60 +-
>   13 files changed, 3873 insertions(+), 914 deletions(-)
> 
> 
> base-commit: c6f2492cda380a8bce00f61c3a4272401fbb9043