| Message ID | 20240411143658.1049706-1-christophe.roullier@foss.st.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Series to deliver Ethernets for STM32MP13 | expand |
On Thu, 11 Apr 2024 16:36:47 +0200, Christophe Roullier wrote: > STM32MP13 is STM32 SOC with 2 GMACs instances > This board have 2 RMII phy: > -Ethernet1: RMII with crystal > -Ethernet2: RMII without crystal > Rework dwmac glue to simplify management for next stm32 > Add support for PHY regulator > > Christophe Roullier (11): > dt-bindings: net: add STM32MP13 compatible in documentation for stm32 > dt-bindings: net: add phy-supply property for stm32 > net: ethernet: stmmac: rework glue to simplify management for next > stm32 > net: ethernet: stmmac: add management of stm32mp13 for stm32 > net: ethernet: stmmac: stm32: update config management for phy wo > cristal > net: ethernet: stm32: clean the way to manage wol irqwake > net: ethernet: stmmac: stm32: support the phy-supply regulator binding > ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 > ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board > ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board > ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support > > .../devicetree/bindings/net/stm32-dwmac.yaml | 83 ++++++- > arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 ++++++ > arch/arm/boot/dts/st/stm32mp131.dtsi | 31 +++ > arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++ > arch/arm/boot/dts/st/stm32mp135f-dk.dts | 48 ++++ > arch/arm/configs/multi_v7_defconfig | 1 + > .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 235 ++++++++++++------ > 7 files changed, 421 insertions(+), 78 deletions(-) > > -- > 2.25.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y st/stm32mp135f-dk.dtb' for 20240411143658.1049706-1-christophe.roullier@foss.st.com: arch/arm/boot/dts/st/stm32mp135f-dk.dtb: adc@48003000: 'ethernet@5800e000' does not match any of the regexes: '^adc@[0-9]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
STM32MP13 is STM32 SOC with 2 GMACs instances This board have 2 RMII phy: -Ethernet1: RMII with crystal -Ethernet2: RMII without crystal Rework dwmac glue to simplify management for next stm32 Add support for PHY regulator Christophe Roullier (11): dt-bindings: net: add STM32MP13 compatible in documentation for stm32 dt-bindings: net: add phy-supply property for stm32 net: ethernet: stmmac: rework glue to simplify management for next stm32 net: ethernet: stmmac: add management of stm32mp13 for stm32 net: ethernet: stmmac: stm32: update config management for phy wo cristal net: ethernet: stm32: clean the way to manage wol irqwake net: ethernet: stmmac: stm32: support the phy-supply regulator binding ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support .../devicetree/bindings/net/stm32-dwmac.yaml | 83 ++++++- arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 ++++++ arch/arm/boot/dts/st/stm32mp131.dtsi | 31 +++ arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++ arch/arm/boot/dts/st/stm32mp135f-dk.dts | 48 ++++ arch/arm/configs/multi_v7_defconfig | 1 + .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 235 ++++++++++++------ 7 files changed, 421 insertions(+), 78 deletions(-)