| Message ID | 20240414203503.18402-25-git@luigi311.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | imx258 improvement series | expand |
Hi Luis, On Sun, Apr 14, 2024 at 02:35:02PM -0600, git@luigi311.com wrote: > From: Luis Garcia <git@luigi311.com> > > Use the v4l2_link_freq_to_bitmap() helper to figure out which > driver-supported link freq can be used on a given system. > > Signed-off-by: Luis Garcia <git@luigi311.com> > Reviewed-by: Pavel Machek <pavel@ucw.cz> > --- > drivers/media/i2c/imx258.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c > index 5de71cb7c1ae..65846dff775e 100644 > --- a/drivers/media/i2c/imx258.c > +++ b/drivers/media/i2c/imx258.c > @@ -693,6 +693,7 @@ struct imx258 { > /* Current mode */ > const struct imx258_mode *cur_mode; > > + unsigned long link_freq_bitmap; > const struct imx258_link_freq_config *link_freq_configs; > const s64 *link_freq_menu_items; > unsigned int lane_mode_idx; > @@ -1552,6 +1553,17 @@ static int imx258_probe(struct i2c_client *client) > return ret; > } > > + ret = v4l2_link_freq_to_bitmap(&client->dev, > + ep.link_frequencies, > + ep.nr_of_link_frequencies, > + imx258->link_freq_menu_items, > + ARRAY_SIZE(link_freq_menu_items_19_2), > + &imx258->link_freq_bitmap); > + if (ret) { > + dev_err(&client->dev, "Link frequency not supported\n"); > + goto error_endpoint_free; > + } > + > /* Get number of data lanes */ > switch (ep.bus.mipi_csi2.num_data_lanes) { > case 2: Looks good to me. ps: Maybe a good plan for the future would be to use: dev_err_probe (instead of dev_err into probe function) But this I think is somenthing for next improvements. :) Thanks & Regards, Tommaso > -- > 2.44.0 > >
On 4/15/24 09:18, Tommaso Merciai wrote: > Hi Luis, > > On Sun, Apr 14, 2024 at 02:35:02PM -0600, git@luigi311.com wrote: >> From: Luis Garcia <git@luigi311.com> >> >> Use the v4l2_link_freq_to_bitmap() helper to figure out which >> driver-supported link freq can be used on a given system. >> >> Signed-off-by: Luis Garcia <git@luigi311.com> >> Reviewed-by: Pavel Machek <pavel@ucw.cz> >> --- >> drivers/media/i2c/imx258.c | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c >> index 5de71cb7c1ae..65846dff775e 100644 >> --- a/drivers/media/i2c/imx258.c >> +++ b/drivers/media/i2c/imx258.c >> @@ -693,6 +693,7 @@ struct imx258 { >> /* Current mode */ >> const struct imx258_mode *cur_mode; >> >> + unsigned long link_freq_bitmap; >> const struct imx258_link_freq_config *link_freq_configs; >> const s64 *link_freq_menu_items; >> unsigned int lane_mode_idx; >> @@ -1552,6 +1553,17 @@ static int imx258_probe(struct i2c_client *client) >> return ret; >> } >> >> + ret = v4l2_link_freq_to_bitmap(&client->dev, >> + ep.link_frequencies, >> + ep.nr_of_link_frequencies, >> + imx258->link_freq_menu_items, >> + ARRAY_SIZE(link_freq_menu_items_19_2), >> + &imx258->link_freq_bitmap); >> + if (ret) { >> + dev_err(&client->dev, "Link frequency not supported\n"); >> + goto error_endpoint_free; >> + } >> + >> /* Get number of data lanes */ >> switch (ep.bus.mipi_csi2.num_data_lanes) { >> case 2: > > Looks good to me. > > ps: > Maybe a good plan for the future would be to use: dev_err_probe > (instead of dev_err into probe function) > > But this I think is somenthing for next improvements. :) > > Thanks & Regards, > Tommaso > Perfect, can i go ahead and add in your reviewed by looks like you didnt add it here. >> -- >> 2.44.0 >> >>
On Mon, Apr 15, 2024 at 10:27:28AM -0600, Luis Garcia wrote: > On 4/15/24 09:18, Tommaso Merciai wrote: > > Hi Luis, > > > > On Sun, Apr 14, 2024 at 02:35:02PM -0600, git@luigi311.com wrote: > >> From: Luis Garcia <git@luigi311.com> > >> > >> Use the v4l2_link_freq_to_bitmap() helper to figure out which > >> driver-supported link freq can be used on a given system. > >> > >> Signed-off-by: Luis Garcia <git@luigi311.com> > >> Reviewed-by: Pavel Machek <pavel@ucw.cz> > >> --- > >> drivers/media/i2c/imx258.c | 12 ++++++++++++ > >> 1 file changed, 12 insertions(+) > >> > >> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c > >> index 5de71cb7c1ae..65846dff775e 100644 > >> --- a/drivers/media/i2c/imx258.c > >> +++ b/drivers/media/i2c/imx258.c > >> @@ -693,6 +693,7 @@ struct imx258 { > >> /* Current mode */ > >> const struct imx258_mode *cur_mode; > >> > >> + unsigned long link_freq_bitmap; > >> const struct imx258_link_freq_config *link_freq_configs; > >> const s64 *link_freq_menu_items; > >> unsigned int lane_mode_idx; > >> @@ -1552,6 +1553,17 @@ static int imx258_probe(struct i2c_client *client) > >> return ret; > >> } > >> > >> + ret = v4l2_link_freq_to_bitmap(&client->dev, > >> + ep.link_frequencies, > >> + ep.nr_of_link_frequencies, > >> + imx258->link_freq_menu_items, > >> + ARRAY_SIZE(link_freq_menu_items_19_2), > >> + &imx258->link_freq_bitmap); > >> + if (ret) { > >> + dev_err(&client->dev, "Link frequency not supported\n"); > >> + goto error_endpoint_free; > >> + } > >> + > >> /* Get number of data lanes */ > >> switch (ep.bus.mipi_csi2.num_data_lanes) { > >> case 2: > > > > Looks good to me. > > > > ps: > > Maybe a good plan for the future would be to use: dev_err_probe > > (instead of dev_err into probe function) > > > > But this I think is somenthing for next improvements. :) > > > > Thanks & Regards, > > Tommaso > > > > Perfect, can i go ahead and add in your reviewed by looks like > you didnt add it here. Yep sorry I miss that. :'( Thanks & Regards, Tommaso > > >> -- > >> 2.44.0 > >> > >> >
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index 5de71cb7c1ae..65846dff775e 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -693,6 +693,7 @@ struct imx258 { /* Current mode */ const struct imx258_mode *cur_mode; + unsigned long link_freq_bitmap; const struct imx258_link_freq_config *link_freq_configs; const s64 *link_freq_menu_items; unsigned int lane_mode_idx; @@ -1552,6 +1553,17 @@ static int imx258_probe(struct i2c_client *client) return ret; } + ret = v4l2_link_freq_to_bitmap(&client->dev, + ep.link_frequencies, + ep.nr_of_link_frequencies, + imx258->link_freq_menu_items, + ARRAY_SIZE(link_freq_menu_items_19_2), + &imx258->link_freq_bitmap); + if (ret) { + dev_err(&client->dev, "Link frequency not supported\n"); + goto error_endpoint_free; + } + /* Get number of data lanes */ switch (ep.bus.mipi_csi2.num_data_lanes) { case 2: