Message ID | 20240413202112.37729-1-luke@ljones.dev (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | platform/x86: asus-wmi: add support for vivobook fan profiles | expand |
On Sun, 14 Apr 2024, Luke D. Jones wrote: > From: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn> > > Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK > to adjust power limits. > > These fan profiles have a different device id than the ROG series. > and different order. Fix grammar. > This reorders the existing modes and adds a new > full speed mode available on these laptops. > > As part of keeping the patch clean the throttle_thermal_policy_available > boolean stored in the driver struct is removed and > throttle_thermal_policy_dev is used in place (as on init it is zeroed). > > Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn> > Co-developed-by: Luke D. Jones <luke@ljones.dev> > Signed-off-by: Luke D. Jones <luke@ljones.dev> > --- > drivers/platform/x86/asus-wmi.c | 100 +++++++++++---------- > include/linux/platform_data/x86/asus-wmi.h | 1 + > 2 files changed, 55 insertions(+), 46 deletions(-) > > diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c > index 2d2b4eca7fd8..439d330fb80b 100644 > --- a/drivers/platform/x86/asus-wmi.c > +++ b/drivers/platform/x86/asus-wmi.c > @@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444); > #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1 > #define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 > > +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 > +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 > +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1 Any good reason why these are not in numerical order? > +#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3 > + > #define USB_INTEL_XUSB2PR 0xD0 > #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 > > @@ -285,8 +290,8 @@ struct asus_wmi { > u32 kbd_rgb_dev; > bool kbd_rgb_state_available; > > - bool throttle_thermal_policy_available; > u8 throttle_thermal_policy_mode; > + u32 throttle_thermal_policy_dev; > > bool cpu_fan_curve_available; > bool gpu_fan_curve_available; > @@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev) > int err, fan_idx; > u8 mode = 0; > > - if (asus->throttle_thermal_policy_available) > + if (asus->throttle_thermal_policy_dev) > mode = asus->throttle_thermal_policy_mode; > /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ > if (mode == 2) > @@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev, > * For machines with throttle this is the only way to reset fans > * to default mode of operation (does not erase curve data). > */ > - if (asus->throttle_thermal_policy_available) { > + if (asus->throttle_thermal_policy_dev) { > err = throttle_thermal_policy_write(asus); > if (err) > return err; > @@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = { > __ATTRIBUTE_GROUPS(asus_fan_curve_attr); > > /* > - * Must be initialised after throttle_thermal_policy_check_present() as > - * we check the status of throttle_thermal_policy_available during init. > + * Must be initialised after throttle_thermal_policy_dev is set as > + * we check the status of throttle_thermal_policy_dev during init. > */ > static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) > { > @@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) > } > > /* Throttle thermal policy ****************************************************/ > - > -static int throttle_thermal_policy_check_present(struct asus_wmi *asus) > -{ > - u32 result; > - int err; > - > - asus->throttle_thermal_policy_available = false; > - > - err = asus_wmi_get_devstate(asus, > - ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, > - &result); > - if (err) { > - if (err == -ENODEV) > - return 0; > - return err; > - } > - > - if (result & ASUS_WMI_DSTS_PRESENCE_BIT) > - asus->throttle_thermal_policy_available = true; > - > - return 0; > -} > - > static int throttle_thermal_policy_write(struct asus_wmi *asus) > { > - int err; > - u8 value; > + u8 value = asus->throttle_thermal_policy_mode; > u32 retval; > + bool vivo; > + int err; > > - value = asus->throttle_thermal_policy_mode; > + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; > + if (vivo) { > + switch (value) { > + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: > + value = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO; > + break; > + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: > + value = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO; > + break; > + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: > + value = ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO; > + break; > + default: > + break; > + } > + } > > - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, > + err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev, > value, &retval); > > sysfs_notify(&asus->platform_device->dev.kobj, NULL, > @@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus) > > static int throttle_thermal_policy_set_default(struct asus_wmi *asus) > { > - if (!asus->throttle_thermal_policy_available) > + if (!asus->throttle_thermal_policy_dev) > return 0; > > asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > @@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus) > static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) > { > u8 new_mode = asus->throttle_thermal_policy_mode + 1; > + bool vivo; > int err; > > - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; > + if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > + new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > + > + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED) > new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; Hmm, add a throttle_thermal_policy_max_mode() helper instead so you can do just this: if (new_mode > throttle_thermal_policy_max_mode(...)) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > asus->throttle_thermal_policy_mode = new_mode; > @@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, > struct asus_wmi *asus = dev_get_drvdata(dev); > u8 new_mode; > int result; > + bool vivo; > int err; > > result = kstrtou8(buf, 10, &new_mode); > if (result < 0) > return result; > > - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; > + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED) > + return -EINVAL; > + else if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) Use the throttle_thermal_policy_max_mode() helper here too. > return -EINVAL; > > asus->throttle_thermal_policy_mode = new_mode;
On Tue, Apr 16, 2024 at 03:51:03PM +0300, Ilpo Järvinen wrote: > On Sun, 14 Apr 2024, Luke D. Jones wrote: > > > From: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn> > > > > Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK > > to adjust power limits. > > > > These fan profiles have a different device id than the ROG series. > > and different order. > > Fix grammar. > my grammar is not the greatest so i'm finding it hard to know what is the error you're referring to but I think that 'add' should become 'adds' ? > > This reorders the existing modes and adds a new > > full speed mode available on these laptops. > > > > As part of keeping the patch clean the throttle_thermal_policy_available > > boolean stored in the driver struct is removed and > > throttle_thermal_policy_dev is used in place (as on init it is zeroed). > > > > Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn> > > Co-developed-by: Luke D. Jones <luke@ljones.dev> > > Signed-off-by: Luke D. Jones <luke@ljones.dev> > > --- > > drivers/platform/x86/asus-wmi.c | 100 +++++++++++---------- > > include/linux/platform_data/x86/asus-wmi.h | 1 + > > 2 files changed, 55 insertions(+), 46 deletions(-) > > > > diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c > > index 2d2b4eca7fd8..439d330fb80b 100644 > > --- a/drivers/platform/x86/asus-wmi.c > > +++ b/drivers/platform/x86/asus-wmi.c > > @@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444); > > #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1 > > #define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 > > > > +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 > > +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 > > +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1 > > Any good reason why these are not in numerical order? > these are not in their numerical order but in their logical order from the point of view of userspace both asus ROG devices and asus VIVOBOOK should behave the same: 0 -> default, 1 -> overboost, 2 -> silent. I'll add a comment to better explain the reasons behind the order of the macros. > > +#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3 > > + > > #define USB_INTEL_XUSB2PR 0xD0 > > #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 > > > > @@ -285,8 +290,8 @@ struct asus_wmi { > > u32 kbd_rgb_dev; > > bool kbd_rgb_state_available; > > > > - bool throttle_thermal_policy_available; > > u8 throttle_thermal_policy_mode; > > + u32 throttle_thermal_policy_dev; > > > > bool cpu_fan_curve_available; > > bool gpu_fan_curve_available; > > @@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev) > > int err, fan_idx; > > u8 mode = 0; > > > > - if (asus->throttle_thermal_policy_available) > > + if (asus->throttle_thermal_policy_dev) > > mode = asus->throttle_thermal_policy_mode; > > /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ > > if (mode == 2) > > @@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev, > > * For machines with throttle this is the only way to reset fans > > * to default mode of operation (does not erase curve data). > > */ > > - if (asus->throttle_thermal_policy_available) { > > + if (asus->throttle_thermal_policy_dev) { > > err = throttle_thermal_policy_write(asus); > > if (err) > > return err; > > @@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = { > > __ATTRIBUTE_GROUPS(asus_fan_curve_attr); > > > > /* > > - * Must be initialised after throttle_thermal_policy_check_present() as > > - * we check the status of throttle_thermal_policy_available during init. > > + * Must be initialised after throttle_thermal_policy_dev is set as > > + * we check the status of throttle_thermal_policy_dev during init. > > */ > > static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) > > { > > @@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) > > } > > > > /* Throttle thermal policy ****************************************************/ > > - > > -static int throttle_thermal_policy_check_present(struct asus_wmi *asus) > > -{ > > - u32 result; > > - int err; > > - > > - asus->throttle_thermal_policy_available = false; > > - > > - err = asus_wmi_get_devstate(asus, > > - ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, > > - &result); > > - if (err) { > > - if (err == -ENODEV) > > - return 0; > > - return err; > > - } > > - > > - if (result & ASUS_WMI_DSTS_PRESENCE_BIT) > > - asus->throttle_thermal_policy_available = true; > > - > > - return 0; > > -} > > - > > static int throttle_thermal_policy_write(struct asus_wmi *asus) > > { > > - int err; > > - u8 value; > > + u8 value = asus->throttle_thermal_policy_mode; > > u32 retval; > > + bool vivo; > > + int err; > > > > - value = asus->throttle_thermal_policy_mode; > > + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; > > + if (vivo) { > > + switch (value) { > > + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: > > + value = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO; > > + break; > > + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: > > + value = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO; > > + break; > > + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: > > + value = ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO; > > + break; > > + default: > > + break; > > + } > > + } > > > > - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, > > + err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev, > > value, &retval); > > > > sysfs_notify(&asus->platform_device->dev.kobj, NULL, > > @@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus) > > > > static int throttle_thermal_policy_set_default(struct asus_wmi *asus) > > { > > - if (!asus->throttle_thermal_policy_available) > > + if (!asus->throttle_thermal_policy_dev) > > return 0; > > > > asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > > @@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus) > > static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) > > { > > u8 new_mode = asus->throttle_thermal_policy_mode + 1; > > + bool vivo; > > int err; > > > > - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > > + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; > > + if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > > + new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > > + > > + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED) > > new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > > Hmm, add a throttle_thermal_policy_max_mode() helper instead so you can do > just this: > > if (new_mode > throttle_thermal_policy_max_mode(...)) > new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; > > this is definitely better! i'll make the necessary changes in v1. > > asus->throttle_thermal_policy_mode = new_mode; > > @@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, > > struct asus_wmi *asus = dev_get_drvdata(dev); > > u8 new_mode; > > int result; > > + bool vivo; > > int err; > > > > result = kstrtou8(buf, 10, &new_mode); > > if (result < 0) > > return result; > > > > - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > > + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; > > + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED) > > + return -EINVAL; > > + else if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) > > Use the throttle_thermal_policy_max_mode() helper here too. > i'll do the appropriate changes here too. > > return -EINVAL; > > > > asus->throttle_thermal_policy_mode = new_mode; > > -- > i. > thank you for your time.
On Tue, 16 Apr 2024, Mohamed Ghanmi wrote: > On Tue, Apr 16, 2024 at 03:51:03PM +0300, Ilpo Järvinen wrote: > > On Sun, 14 Apr 2024, Luke D. Jones wrote: > > > > > From: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn> > > > > > > Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK > > > to adjust power limits. > > > > > > These fan profiles have a different device id than the ROG series. > > > and different order. > > > > Fix grammar. > > my grammar is not the greatest so i'm finding it hard to know what is > the error you're referring to but I think that 'add' > should become 'adds' ? That's not what I was referring to, you've a dangling/broken "sentence" right in front of my reply: "and different order." Please fix that. Perhaps you just want to remove the stop (".") from the previous sentence to join the sentences together?
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 2d2b4eca7fd8..439d330fb80b 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444); #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1 #define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1 +#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3 + #define USB_INTEL_XUSB2PR 0xD0 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 @@ -285,8 +290,8 @@ struct asus_wmi { u32 kbd_rgb_dev; bool kbd_rgb_state_available; - bool throttle_thermal_policy_available; u8 throttle_thermal_policy_mode; + u32 throttle_thermal_policy_dev; bool cpu_fan_curve_available; bool gpu_fan_curve_available; @@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev) int err, fan_idx; u8 mode = 0; - if (asus->throttle_thermal_policy_available) + if (asus->throttle_thermal_policy_dev) mode = asus->throttle_thermal_policy_mode; /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ if (mode == 2) @@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev, * For machines with throttle this is the only way to reset fans * to default mode of operation (does not erase curve data). */ - if (asus->throttle_thermal_policy_available) { + if (asus->throttle_thermal_policy_dev) { err = throttle_thermal_policy_write(asus); if (err) return err; @@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = { __ATTRIBUTE_GROUPS(asus_fan_curve_attr); /* - * Must be initialised after throttle_thermal_policy_check_present() as - * we check the status of throttle_thermal_policy_available during init. + * Must be initialised after throttle_thermal_policy_dev is set as + * we check the status of throttle_thermal_policy_dev during init. */ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) { @@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) } /* Throttle thermal policy ****************************************************/ - -static int throttle_thermal_policy_check_present(struct asus_wmi *asus) -{ - u32 result; - int err; - - asus->throttle_thermal_policy_available = false; - - err = asus_wmi_get_devstate(asus, - ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, - &result); - if (err) { - if (err == -ENODEV) - return 0; - return err; - } - - if (result & ASUS_WMI_DSTS_PRESENCE_BIT) - asus->throttle_thermal_policy_available = true; - - return 0; -} - static int throttle_thermal_policy_write(struct asus_wmi *asus) { - int err; - u8 value; + u8 value = asus->throttle_thermal_policy_mode; u32 retval; + bool vivo; + int err; - value = asus->throttle_thermal_policy_mode; + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + if (vivo) { + switch (value) { + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: + value = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO; + break; + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: + value = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO; + break; + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: + value = ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO; + break; + default: + break; + } + } - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, + err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev, value, &retval); sysfs_notify(&asus->platform_device->dev.kobj, NULL, @@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus) static int throttle_thermal_policy_set_default(struct asus_wmi *asus) { - if (!asus->throttle_thermal_policy_available) + if (!asus->throttle_thermal_policy_dev) return 0; asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; @@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus) static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) { u8 new_mode = asus->throttle_thermal_policy_mode + 1; + bool vivo; int err; - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) + new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; + + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; asus->throttle_thermal_policy_mode = new_mode; @@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, struct asus_wmi *asus = dev_get_drvdata(dev); u8 new_mode; int result; + bool vivo; int err; result = kstrtou8(buf, 10, &new_mode); if (result < 0) return result; - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED) + return -EINVAL; + else if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) return -EINVAL; asus->throttle_thermal_policy_mode = new_mode; @@ -3748,7 +3755,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, return count; } -// Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent +/* + * Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent + * VIVOBOOK: 3 - fans full speed + */ static DEVICE_ATTR_RW(throttle_thermal_policy); /* Platform profile ***********************************************************/ @@ -3814,7 +3824,7 @@ static int platform_profile_setup(struct asus_wmi *asus) * Not an error if a component platform_profile relies on is unavailable * so early return, skipping the setup of platform_profile. */ - if (!asus->throttle_thermal_policy_available) + if (!asus->throttle_thermal_policy_dev) return 0; dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n"); @@ -4229,7 +4239,7 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus) if (code == NOTIFY_KBD_FBM || code == NOTIFY_KBD_TTP) { if (asus->fan_boost_mode_available) fan_boost_mode_switch_next(asus); - if (asus->throttle_thermal_policy_available) + if (asus->throttle_thermal_policy_dev) throttle_thermal_policy_switch_next(asus); return; @@ -4401,7 +4411,7 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj, else if (attr == &dev_attr_fan_boost_mode.attr) ok = asus->fan_boost_mode_available; else if (attr == &dev_attr_throttle_thermal_policy.attr) - ok = asus->throttle_thermal_policy_available; + ok = asus->throttle_thermal_policy_dev != 0; else if (attr == &dev_attr_ppt_pl2_sppt.attr) devid = ASUS_WMI_DEVID_PPT_PL2_SPPT; else if (attr == &dev_attr_ppt_pl1_spl.attr) @@ -4693,16 +4703,15 @@ static int asus_wmi_add(struct platform_device *pdev) else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE2)) asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE2; + if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY)) + asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY; + else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO)) + asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + err = fan_boost_mode_check_present(asus); if (err) goto fail_fan_boost_mode; - err = throttle_thermal_policy_check_present(asus); - if (err) - goto fail_throttle_thermal_policy; - else - throttle_thermal_policy_set_default(asus); - err = platform_profile_setup(asus); if (err) goto fail_platform_profile_setup; @@ -4797,7 +4806,6 @@ static int asus_wmi_add(struct platform_device *pdev) fail_input: asus_wmi_sysfs_exit(asus->platform_device); fail_sysfs: -fail_throttle_thermal_policy: fail_custom_fan_curve: fail_platform_profile_setup: if (asus->platform_profile_support) diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 3eb5cd6773ad..982a637744ec 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -64,6 +64,7 @@ #define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032 #define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019 /* Misc */ #define ASUS_WMI_DEVID_PANEL_OD 0x00050019