diff mbox series

[v2] arm64: dts: imx8mp: Align both CSI2 pixel clock

Message ID 20240416141914.9375-1-marex@denx.de (mailing list archive)
State Superseded
Headers show
Series [v2] arm64: dts: imx8mp: Align both CSI2 pixel clock | expand

Commit Message

Marek Vasut April 16, 2024, 2:19 p.m. UTC
Configure both CSI2 assigned-clock-rates the same way.
There does not seem to be any reason for keeping the
two CSI2 pixel clock set to different frequencies.

This also reduces first CSI2 clock from overdrive mode
frequency which is 500 MHz down below the regular mode
frequency of 400 MHz.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Paul Elder <paul.elder@ideasonboard.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
---
V2: Align both clock to 266 MHz and update commit message
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Peng Fan April 16, 2024, 3:01 p.m. UTC | #1
> Subject: [PATCH v2] arm64: dts: imx8mp: Align both CSI2 pixel clock
> 
> Configure both CSI2 assigned-clock-rates the same way.
> There does not seem to be any reason for keeping the two CSI2 pixel clock set
> to different frequencies.
> 
> This also reduces first CSI2 clock from overdrive mode frequency which is 500
> MHz down below the regular mode frequency of 400 MHz.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Paul Elder <paul.elder@ideasonboard.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: imx@lists.linux.dev
> Cc: linux-arm-kernel@lists.infradead.org

Reviewed-by: Peng Fan <peng.fan@nxp.com>
> ---
> V2: Align both clock to 266 MHz and update commit message
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 1bb96e96639f2..7883f5c056f4e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
>  						  <&clk
> IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
>  				assigned-clock-parents = <&clk
> IMX8MP_SYS_PLL2_1000M>,
>  							 <&clk
> IMX8MP_CLK_24M>;
> -				assigned-clock-rates = <500000000>;
> +				assigned-clock-rates = <266000000>;
>  				power-domains = <&media_blk_ctrl
> IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
>  				status = "disabled";
> 
> --
> 2.43.0
>
Alexander Stein April 17, 2024, 9:12 a.m. UTC | #2
Am Dienstag, 16. April 2024, 16:19:10 CEST schrieb Marek Vasut:
> Configure both CSI2 assigned-clock-rates the same way.
> There does not seem to be any reason for keeping the
> two CSI2 pixel clock set to different frequencies.
> 
> This also reduces first CSI2 clock from overdrive mode
> frequency which is 500 MHz down below the regular mode
> frequency of 400 MHz.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Apparently there is no difference when using imx415 (3840x2160) sensor.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Paul Elder <paul.elder@ideasonboard.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: imx@lists.linux.dev
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> V2: Align both clock to 266 MHz and update commit message
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 1bb96e96639f2..7883f5c056f4e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
>  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
>  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
>  							 <&clk IMX8MP_CLK_24M>;
> -				assigned-clock-rates = <500000000>;
> +				assigned-clock-rates = <266000000>;
>  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
>  				status = "disabled";
>  
>
Ahmad Fatoum April 17, 2024, 10:14 a.m. UTC | #3
On 16.04.24 16:19, Marek Vasut wrote:
> Configure both CSI2 assigned-clock-rates the same way.
> There does not seem to be any reason for keeping the
> two CSI2 pixel clock set to different frequencies.
> 
> This also reduces first CSI2 clock from overdrive mode
> frequency which is 500 MHz down below the regular mode
> frequency of 400 MHz.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Paul Elder <paul.elder@ideasonboard.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: imx@lists.linux.dev
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> V2: Align both clock to 266 MHz and update commit message
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 1bb96e96639f2..7883f5c056f4e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
>  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
>  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
>  							 <&clk IMX8MP_CLK_24M>;
> -				assigned-clock-rates = <500000000>;
> +				assigned-clock-rates = <266000000>;
>  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
>  				status = "disabled";
>
Ahmad Fatoum April 17, 2024, 10:17 a.m. UTC | #4
On 17.04.24 12:14, Ahmad Fatoum wrote:
> On 16.04.24 16:19, Marek Vasut wrote:
>> Configure both CSI2 assigned-clock-rates the same way.
>> There does not seem to be any reason for keeping the
>> two CSI2 pixel clock set to different frequencies.
>>
>> This also reduces first CSI2 clock from overdrive mode
>> frequency which is 500 MHz down below the regular mode
>> frequency of 400 MHz.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
> 
> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

I see now that the node has a clock-frequency = <500000000>; still.
This should be lowered too, shouldn't it?

Cheers,
Ahmad

> 
>> ---
>> Cc: Conor Dooley <conor+dt@kernel.org>
>> Cc: Fabio Estevam <festevam@gmail.com>
>> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
>> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> Cc: Paul Elder <paul.elder@ideasonboard.com>
>> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: Sascha Hauer <s.hauer@pengutronix.de>
>> Cc: Shawn Guo <shawnguo@kernel.org>
>> Cc: devicetree@vger.kernel.org
>> Cc: imx@lists.linux.dev
>> Cc: linux-arm-kernel@lists.infradead.org
>> ---
>> V2: Align both clock to 266 MHz and update commit message
>> ---
>>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
>> index 1bb96e96639f2..7883f5c056f4e 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
>> @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
>>  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
>>  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
>>  							 <&clk IMX8MP_CLK_24M>;
>> -				assigned-clock-rates = <500000000>;
>> +				assigned-clock-rates = <266000000>;
>>  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
>>  				status = "disabled";
>>  
>
Marek Vasut April 17, 2024, 11:06 a.m. UTC | #5
On 4/17/24 12:17 PM, Ahmad Fatoum wrote:
> On 17.04.24 12:14, Ahmad Fatoum wrote:
>> On 16.04.24 16:19, Marek Vasut wrote:
>>> Configure both CSI2 assigned-clock-rates the same way.
>>> There does not seem to be any reason for keeping the
>>> two CSI2 pixel clock set to different frequencies.
>>>
>>> This also reduces first CSI2 clock from overdrive mode
>>> frequency which is 500 MHz down below the regular mode
>>> frequency of 400 MHz.
>>>
>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>
>> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> 
> I see now that the node has a clock-frequency = <500000000>; still.
> This should be lowered too, shouldn't it?

Oh, right, good catch.
Alexander Stein May 3, 2024, 12:58 p.m. UTC | #6
Hi,

Am Mittwoch, 17. April 2024, 11:12:04 CEST schrieb Alexander Stein:
> Am Dienstag, 16. April 2024, 16:19:10 CEST schrieb Marek Vasut:
> > Configure both CSI2 assigned-clock-rates the same way.
> > There does not seem to be any reason for keeping the
> > two CSI2 pixel clock set to different frequencies.
> > 
> > This also reduces first CSI2 clock from overdrive mode
> > frequency which is 500 MHz down below the regular mode
> > frequency of 400 MHz.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> 
> Apparently there is no difference when using imx415 (3840x2160) sensor.

Just for the records: While this change does not affect imx415 (3840x2160)
processing, reducing clock-frequency as well (v3) imx415 does not work.
So I assume that for this image size a higher than default frequency is
required.

Best regards,
Alexander

> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> 
> > ---
> > Cc: Conor Dooley <conor+dt@kernel.org>
> > Cc: Fabio Estevam <festevam@gmail.com>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Cc: Paul Elder <paul.elder@ideasonboard.com>
> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> > Cc: Rob Herring <robh@kernel.org>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: devicetree@vger.kernel.org
> > Cc: imx@lists.linux.dev
> > Cc: linux-arm-kernel@lists.infradead.org
> > ---
> > V2: Align both clock to 266 MHz and update commit message
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 1bb96e96639f2..7883f5c056f4e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
> >  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
> >  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> >  							 <&clk IMX8MP_CLK_24M>;
> > -				assigned-clock-rates = <500000000>;
> > +				assigned-clock-rates = <266000000>;
> >  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> >  				status = "disabled";
> >  
> > 
> 
> 
>
Laurent Pinchart May 3, 2024, 1:45 p.m. UTC | #7
On Fri, May 03, 2024 at 02:58:19PM +0200, Alexander Stein wrote:
> Am Mittwoch, 17. April 2024, 11:12:04 CEST schrieb Alexander Stein:
> > Am Dienstag, 16. April 2024, 16:19:10 CEST schrieb Marek Vasut:
> > > Configure both CSI2 assigned-clock-rates the same way.
> > > There does not seem to be any reason for keeping the
> > > two CSI2 pixel clock set to different frequencies.
> > > 
> > > This also reduces first CSI2 clock from overdrive mode
> > > frequency which is 500 MHz down below the regular mode
> > > frequency of 400 MHz.
> > > 
> > > Signed-off-by: Marek Vasut <marex@denx.de>
> > 
> > Apparently there is no difference when using imx415 (3840x2160) sensor.
> 
> Just for the records: While this change does not affect imx415 (3840x2160)
> processing, reducing clock-frequency as well (v3) imx415 does not work.
> So I assume that for this image size a higher than default frequency is
> required.

For the time being I expect sensor overlays to override the default
clock setup. Ideally the clock frequencies should be configured
automatically at runtime by the CSI-2 RX driver.

> > Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > 
> > > ---
> > > Cc: Conor Dooley <conor+dt@kernel.org>
> > > Cc: Fabio Estevam <festevam@gmail.com>
> > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > Cc: Paul Elder <paul.elder@ideasonboard.com>
> > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> > > Cc: Rob Herring <robh@kernel.org>
> > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > Cc: devicetree@vger.kernel.org
> > > Cc: imx@lists.linux.dev
> > > Cc: linux-arm-kernel@lists.infradead.org
> > > ---
> > > V2: Align both clock to 266 MHz and update commit message
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index 1bb96e96639f2..7883f5c056f4e 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
> > >  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
> > >  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> > >  							 <&clk IMX8MP_CLK_24M>;
> > > -				assigned-clock-rates = <500000000>;
> > > +				assigned-clock-rates = <266000000>;
> > >  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> > >  				status = "disabled";
> > >  
> > >
Alexander Stein May 6, 2024, 6:19 a.m. UTC | #8
Am Freitag, 3. Mai 2024, 15:45:57 CEST schrieb Laurent Pinchart:
> On Fri, May 03, 2024 at 02:58:19PM +0200, Alexander Stein wrote:
> > Am Mittwoch, 17. April 2024, 11:12:04 CEST schrieb Alexander Stein:
> > > Am Dienstag, 16. April 2024, 16:19:10 CEST schrieb Marek Vasut:
> > > > Configure both CSI2 assigned-clock-rates the same way.
> > > > There does not seem to be any reason for keeping the
> > > > two CSI2 pixel clock set to different frequencies.
> > > > 
> > > > This also reduces first CSI2 clock from overdrive mode
> > > > frequency which is 500 MHz down below the regular mode
> > > > frequency of 400 MHz.
> > > > 
> > > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > 
> > > Apparently there is no difference when using imx415 (3840x2160) sensor.
> > 
> > Just for the records: While this change does not affect imx415 (3840x2160)
> > processing, reducing clock-frequency as well (v3) imx415 does not work.
> > So I assume that for this image size a higher than default frequency is
> > required.
> 
> For the time being I expect sensor overlays to override the default
> clock setup.

Yep, that's what I did in the end.

> Ideally the clock frequencies should be configured
> automatically at runtime by the CSI-2 RX driver.

Ideally, yes. In this case it depends on whether it is MIPI-CSI 1 in normal
or overdrive mode, if it is MIPI-CSI 2 or if both cameras a run
simultaneously. I wonder if it really worth to add that much infrastructure
for a use case which is essentially fixed setup.

Best regards,
Alexander

> > > Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > > 
> > > > ---
> > > > Cc: Conor Dooley <conor+dt@kernel.org>
> > > > Cc: Fabio Estevam <festevam@gmail.com>
> > > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > > Cc: Paul Elder <paul.elder@ideasonboard.com>
> > > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> > > > Cc: Rob Herring <robh@kernel.org>
> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > > Cc: devicetree@vger.kernel.org
> > > > Cc: imx@lists.linux.dev
> > > > Cc: linux-arm-kernel@lists.infradead.org
> > > > ---
> > > > V2: Align both clock to 266 MHz and update commit message
> > > > ---
> > > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > 
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > index 1bb96e96639f2..7883f5c056f4e 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
> > > >  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
> > > >  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> > > >  							 <&clk IMX8MP_CLK_24M>;
> > > > -				assigned-clock-rates = <500000000>;
> > > > +				assigned-clock-rates = <266000000>;
> > > >  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> > > >  				status = "disabled";
> > > >  
> > > > 
> 
>
Laurent Pinchart May 6, 2024, 6:55 p.m. UTC | #9
On Mon, May 06, 2024 at 08:19:57AM +0200, Alexander Stein wrote:
> Am Freitag, 3. Mai 2024, 15:45:57 CEST schrieb Laurent Pinchart:
> > On Fri, May 03, 2024 at 02:58:19PM +0200, Alexander Stein wrote:
> > > Am Mittwoch, 17. April 2024, 11:12:04 CEST schrieb Alexander Stein:
> > > > Am Dienstag, 16. April 2024, 16:19:10 CEST schrieb Marek Vasut:
> > > > > Configure both CSI2 assigned-clock-rates the same way.
> > > > > There does not seem to be any reason for keeping the
> > > > > two CSI2 pixel clock set to different frequencies.
> > > > > 
> > > > > This also reduces first CSI2 clock from overdrive mode
> > > > > frequency which is 500 MHz down below the regular mode
> > > > > frequency of 400 MHz.
> > > > > 
> > > > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > > 
> > > > Apparently there is no difference when using imx415 (3840x2160) sensor.
> > > 
> > > Just for the records: While this change does not affect imx415 (3840x2160)
> > > processing, reducing clock-frequency as well (v3) imx415 does not work.
> > > So I assume that for this image size a higher than default frequency is
> > > required.
> > 
> > For the time being I expect sensor overlays to override the default
> > clock setup.
> 
> Yep, that's what I did in the end.
> 
> > Ideally the clock frequencies should be configured
> > automatically at runtime by the CSI-2 RX driver.
> 
> Ideally, yes. In this case it depends on whether it is MIPI-CSI 1 in normal
> or overdrive mode, if it is MIPI-CSI 2 or if both cameras a run
> simultaneously. I wonder if it really worth to add that much infrastructure
> for a use case which is essentially fixed setup.

There could be platforms where two cameras are connected, and the user
would want to operate them either concurrently at lower resolutions (and
speed), or separately at higher resolutions.

> > > > Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > > > 
> > > > > ---
> > > > > Cc: Conor Dooley <conor+dt@kernel.org>
> > > > > Cc: Fabio Estevam <festevam@gmail.com>
> > > > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> > > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > > > Cc: Paul Elder <paul.elder@ideasonboard.com>
> > > > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> > > > > Cc: Rob Herring <robh@kernel.org>
> > > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > > > Cc: devicetree@vger.kernel.org
> > > > > Cc: imx@lists.linux.dev
> > > > > Cc: linux-arm-kernel@lists.infradead.org
> > > > > ---
> > > > > V2: Align both clock to 266 MHz and update commit message
> > > > > ---
> > > > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
> > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > 
> > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > > index 1bb96e96639f2..7883f5c056f4e 100644
> > > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > > @@ -1667,7 +1667,7 @@ mipi_csi_0: csi@32e40000 {
> > > > >  						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
> > > > >  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> > > > >  							 <&clk IMX8MP_CLK_24M>;
> > > > > -				assigned-clock-rates = <500000000>;
> > > > > +				assigned-clock-rates = <266000000>;
> > > > >  				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> > > > >  				status = "disabled";
> > > > >
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 1bb96e96639f2..7883f5c056f4e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1667,7 +1667,7 @@  mipi_csi_0: csi@32e40000 {
 						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
 							 <&clk IMX8MP_CLK_24M>;
-				assigned-clock-rates = <500000000>;
+				assigned-clock-rates = <266000000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
 				status = "disabled";