@@ -1293,14 +1293,29 @@ static void lan9303_phylink_get_caps(struct dsa_switch *ds, int port,
}
}
-static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void lan9303_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+}
+
+static void lan9303_phylink_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+}
+
+static void lan9303_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause,
+ int speed, int duplex, bool tx_pause,
bool rx_pause)
{
- struct lan9303 *chip = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct lan9303 *chip = dp->ds->priv;
+ struct dsa_switch *ds = dp->ds;
+ int port = dp->index;
u32 ctl;
u32 reg;
@@ -1330,6 +1345,12 @@ static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
regmap_write(chip->regmap, flow_ctl_reg[port], reg);
}
+static const struct phylink_mac_ops lan9303_phylink_mac_ops = {
+ .mac_config = lan9303_phylink_mac_config,
+ .mac_link_down = lan9303_phylink_mac_link_down,
+ .mac_link_up = lan9303_phylink_mac_link_up,
+};
+
static const struct dsa_switch_ops lan9303_switch_ops = {
.get_tag_protocol = lan9303_get_tag_protocol,
.setup = lan9303_setup,
@@ -1337,7 +1358,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = {
.phy_read = lan9303_phy_read,
.phy_write = lan9303_phy_write,
.phylink_get_caps = lan9303_phylink_get_caps,
- .phylink_mac_link_up = lan9303_phylink_mac_link_up,
.get_ethtool_stats = lan9303_get_ethtool_stats,
.get_sset_count = lan9303_get_sset_count,
.port_enable = lan9303_port_enable,
@@ -1365,6 +1385,7 @@ static int lan9303_register_switch(struct lan9303 *chip)
chip->ds->num_ports = LAN9303_NUM_PORTS;
chip->ds->priv = chip;
chip->ds->ops = &lan9303_switch_ops;
+ chip->ds->phylink_mac_ops = &lan9303_phylink_mac_ops;
base = chip->phy_addr_base;
chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base);
Convert lan9303 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. We need to provide stubs for the mac_link_down() and mac_config() methods which are mandatory. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/dsa/lan9303-core.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-)