| Message ID | 20240417140013.12575-3-fancer.lancer@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: stmmac: Fix MAC-capabilities procedure | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/apply | fail | Patch does not apply to net-next-0 |
On Wed, 17 Apr 2024, Serge Semin wrote: > After a set of recent fixes the stmmac_phy_setup() and > stmmac_reinit_queues() methods have turned to having some duplicated code. > Let's get rid from the duplication by moving the MAC-capabilities > initialization to the PHYLINK MAC-capabilities getter. The getter is > called during each network device interface open/close cycle. So the > MAC-capabilities will be initialized in generic device open procedure and > in case of the Tx/Rx queues re-initialization as the original code > semantics implies. > > Signed-off-by: Serge Semin <fancer.lancer@gmail.com> > > --- > > Link: https://lore.kernel.org/netdev/20240412180340.7965-5-fancer.lancer@gmail.com/ > Changelog v2: > - Resubmit the patch to net-next separately from the main patchset (Paolo) > --- > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++---------- > 1 file changed, 17 insertions(+), 19 deletions(-) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > index b810f6b69bf5..0d6cd1704e6a 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > @@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) > priv->pause, tx_cnt); > } > > +static unsigned long stmmac_mac_get_caps(struct phylink_config *config, > + phy_interface_t interface) > +{ > + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); > + > + /* Refresh the MAC-specific capabilities */ > + stmmac_mac_update_caps(priv); > + > + config->mac_capabilities = priv->hw->link.caps; > + > + if (priv->plat->max_speed) > + phylink_limit_mac_speed(config, priv->plat->max_speed); > + > + return config->mac_capabilities; > +} > + > static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config, > phy_interface_t interface) > { > @@ -1105,6 +1121,7 @@ static void stmmac_mac_link_up(struct phylink_config *config, > } > > static const struct phylink_mac_ops stmmac_phylink_mac_ops = { > + .mac_get_caps = stmmac_mac_get_caps, > .mac_select_pcs = stmmac_mac_select_pcs, > .mac_config = stmmac_mac_config, > .mac_link_down = stmmac_mac_link_down, > @@ -1204,7 +1221,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) > int mode = priv->plat->phy_interface; > struct fwnode_handle *fwnode; > struct phylink *phylink; > - int max_speed; > > priv->phylink_config.dev = &priv->dev->dev; > priv->phylink_config.type = PHYLINK_NETDEV; > @@ -1225,15 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) > xpcs_get_interfaces(priv->hw->xpcs, > priv->phylink_config.supported_interfaces); > > - /* Refresh the MAC-specific capabilities */ > - stmmac_mac_update_caps(priv); > - > - priv->phylink_config.mac_capabilities = priv->hw->link.caps; > - > - max_speed = priv->plat->max_speed; > - if (max_speed) > - phylink_limit_mac_speed(&priv->phylink_config, max_speed); > - > fwnode = priv->plat->port_node; > if (!fwnode) > fwnode = dev_fwnode(priv->device); > @@ -7327,7 +7334,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) > { > struct stmmac_priv *priv = netdev_priv(dev); > int ret = 0, i; > - int max_speed; > > if (netif_running(dev)) > stmmac_release(dev); > @@ -7341,14 +7347,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) > priv->rss.table[i] = ethtool_rxfh_indir_default(i, > rx_cnt); > > - stmmac_mac_update_caps(priv); > - > - priv->phylink_config.mac_capabilities = priv->hw->link.caps; > - > - max_speed = priv->plat->max_speed; > - if (max_speed) > - phylink_limit_mac_speed(&priv->phylink_config, max_speed); > - > stmmac_napi_add(dev); > > if (netif_running(dev)) > -- > 2.43.0 > > Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Thanks,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b810f6b69bf5..0d6cd1704e6a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) priv->pause, tx_cnt); } +static unsigned long stmmac_mac_get_caps(struct phylink_config *config, + phy_interface_t interface) +{ + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); + + /* Refresh the MAC-specific capabilities */ + stmmac_mac_update_caps(priv); + + config->mac_capabilities = priv->hw->link.caps; + + if (priv->plat->max_speed) + phylink_limit_mac_speed(config, priv->plat->max_speed); + + return config->mac_capabilities; +} + static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { @@ -1105,6 +1121,7 @@ static void stmmac_mac_link_up(struct phylink_config *config, } static const struct phylink_mac_ops stmmac_phylink_mac_ops = { + .mac_get_caps = stmmac_mac_get_caps, .mac_select_pcs = stmmac_mac_select_pcs, .mac_config = stmmac_mac_config, .mac_link_down = stmmac_mac_link_down, @@ -1204,7 +1221,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) int mode = priv->plat->phy_interface; struct fwnode_handle *fwnode; struct phylink *phylink; - int max_speed; priv->phylink_config.dev = &priv->dev->dev; priv->phylink_config.type = PHYLINK_NETDEV; @@ -1225,15 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) xpcs_get_interfaces(priv->hw->xpcs, priv->phylink_config.supported_interfaces); - /* Refresh the MAC-specific capabilities */ - stmmac_mac_update_caps(priv); - - priv->phylink_config.mac_capabilities = priv->hw->link.caps; - - max_speed = priv->plat->max_speed; - if (max_speed) - phylink_limit_mac_speed(&priv->phylink_config, max_speed); - fwnode = priv->plat->port_node; if (!fwnode) fwnode = dev_fwnode(priv->device); @@ -7327,7 +7334,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) { struct stmmac_priv *priv = netdev_priv(dev); int ret = 0, i; - int max_speed; if (netif_running(dev)) stmmac_release(dev); @@ -7341,14 +7347,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt); - stmmac_mac_update_caps(priv); - - priv->phylink_config.mac_capabilities = priv->hw->link.caps; - - max_speed = priv->plat->max_speed; - if (max_speed) - phylink_limit_mac_speed(&priv->phylink_config, max_speed); - stmmac_napi_add(dev); if (netif_running(dev))
After a set of recent fixes the stmmac_phy_setup() and stmmac_reinit_queues() methods have turned to having some duplicated code. Let's get rid from the duplication by moving the MAC-capabilities initialization to the PHYLINK MAC-capabilities getter. The getter is called during each network device interface open/close cycle. So the MAC-capabilities will be initialized in generic device open procedure and in case of the Tx/Rx queues re-initialization as the original code semantics implies. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> --- Link: https://lore.kernel.org/netdev/20240412180340.7965-5-fancer.lancer@gmail.com/ Changelog v2: - Resubmit the patch to net-next separately from the main patchset (Paolo) --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++---------- 1 file changed, 17 insertions(+), 19 deletions(-)