| Message ID | 20240416063600.309747-2-quic_mohs@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ASoC: codecs: wcd937x: add wcd937x audio codec support | expand |
On 16/04/2024 08:35, Mohammad Rafi Shaik wrote: > From: Prasad Kumpatla <quic_pkumpatl@quicinc.com> > > Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC > connected over SoundWire. This device has two SoundWire device RX and > TX respectively, supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH, > 6 DMICs, MBHC. > > Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com> > Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com> > Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com> > --- > .../bindings/sound/qcom,wcd937x.yaml | 119 ++++++++++++++++++ > 1 file changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml > > diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml > new file mode 100644 > index 000000000000..b45f823af04f > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml No wildcards. This is wcd9370, right? > @@ -0,0 +1,119 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm WCD9370 Audio Codec > + > +maintainers: > + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > + > +description: | Do not need '|' unless you need to preserve formatting. > + Qualcomm WCD9370 Codec is a standalone Hi-Fi audio codec IC. > + It has RX and TX Soundwire slave devices. > + > +properties: > + compatible: > + enum: > + - qcom,wcd9370-codec Can it be anything else than codec? > + > + reset-gpios: > + description: GPIO spec for reset line to use > + maxItems: 1 > + > + vdd-buck-supply: > + description: A reference to the 1.8V buck supply > + > + vdd-rxtx-supply: > + description: A reference to the 1.8V rx supply > + > + vdd-px-supply: > + description: A reference to the 1.8V I/O supply > + > + vdd-mic-bias-supply: > + description: A reference to the 3.8V mic bias supply > + > + qcom,tx-device: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: A reference to Soundwire tx device phandle "A reference to phandle" is not correct. Phandle is the reference. Anyway, both are redundant. > > + qcom,rx-device: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: A reference to Soundwire rx device phandle > + > + qcom,micbias1-microvolt: > + description: micbias1 voltage > + minimum: 1800000 > + maximum: 2850000 > + > + qcom,micbias2-microvolt: > + description: micbias2 voltage > + minimum: 1800000 > + maximum: 2850000 > + > + qcom,micbias3-microvolt: > + description: micbias3 voltage > + minimum: 1800000 > + maximum: 2850000 > + > + '#sound-dai-cells': > + const: 1 > + > +required: > + - compatible > + - reset-gpios > + - qcom,tx-device > + - qcom,rx-device > + - qcom,micbias1-microvolt > + - qcom,micbias2-microvolt > + - qcom,micbias3-microvolt > + - "#sound-dai-cells" > + > +unevaluatedProperties: false This does not make sense without ref to dai-common, so this should point you to missing ref. > + > +examples: > + - | > + codec { > + compatible = "qcom,wcd9370-codec"; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&wcd_reset_n>; > + pinctrl-1 = <&wcd_reset_n_sleep>; > + reset-gpios = <&tlmm 83 0>; > + vdd-buck-supply = <&vreg_l17b_1p8>; > + vdd-rxtx-supply = <&vreg_l18b_1p8>; > + vdd-px-supply = <&vreg_l18b_1p8>; > + vdd-mic-bias-supply = <&vreg_bob>; > + qcom,micbias1-microvolt = <1800000>; > + qcom,micbias2-microvolt = <1800000>; > + qcom,micbias3-microvolt = <1800000>; > + qcom,rx-device = <&wcd937x_rx>; > + qcom,tx-device = <&wcd937x_tx>; > + #sound-dai-cells = <1>; > + }; > + > + /* ... */ > + > + soundwire@3210000 { > + #address-cells = <2>; Drop this and other nodes. Best regards, Krzysztof
On 4/17/2024 9:21 PM, Krzysztof Kozlowski wrote: > On 16/04/2024 08:35, Mohammad Rafi Shaik wrote: >> From: Prasad Kumpatla <quic_pkumpatl@quicinc.com> >> >> Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC >> connected over SoundWire. This device has two SoundWire device RX and >> TX respectively, supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH, >> 6 DMICs, MBHC. >> >> Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com> >> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com> >> Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com> >> --- >> .../bindings/sound/qcom,wcd937x.yaml | 119 ++++++++++++++++++ >> 1 file changed, 119 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml >> >> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml >> new file mode 100644 >> index 000000000000..b45f823af04f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml > > No wildcards. This is wcd9370, right? > >> @@ -0,0 +1,119 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm WCD9370 Audio Codec >> + >> +maintainers: >> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> + >> +description: | > > Do not need '|' unless you need to preserve formatting. ACK will remove '|' in next version patch set. > >> + Qualcomm WCD9370 Codec is a standalone Hi-Fi audio codec IC. >> + It has RX and TX Soundwire slave devices. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,wcd9370-codec > > Can it be anything else than codec? > >> + >> + reset-gpios: >> + description: GPIO spec for reset line to use >> + maxItems: 1 >> + >> + vdd-buck-supply: >> + description: A reference to the 1.8V buck supply >> + >> + vdd-rxtx-supply: >> + description: A reference to the 1.8V rx supply >> + >> + vdd-px-supply: >> + description: A reference to the 1.8V I/O supply >> + >> + vdd-mic-bias-supply: >> + description: A reference to the 3.8V mic bias supply >> + >> + qcom,tx-device: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + description: A reference to Soundwire tx device phandle > > "A reference to phandle" is not correct. Phandle is the reference. > Anyway, both are redundant. > ACK, >> >> + qcom,rx-device: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + description: A reference to Soundwire rx device phandle >> + >> + qcom,micbias1-microvolt: >> + description: micbias1 voltage >> + minimum: 1800000 >> + maximum: 2850000 >> + >> + qcom,micbias2-microvolt: >> + description: micbias2 voltage >> + minimum: 1800000 >> + maximum: 2850000 >> + >> + qcom,micbias3-microvolt: >> + description: micbias3 voltage >> + minimum: 1800000 >> + maximum: 2850000 >> + >> + '#sound-dai-cells': >> + const: 1 >> + >> +required: >> + - compatible >> + - reset-gpios >> + - qcom,tx-device >> + - qcom,rx-device >> + - qcom,micbias1-microvolt >> + - qcom,micbias2-microvolt >> + - qcom,micbias3-microvolt >> + - "#sound-dai-cells" >> + >> +unevaluatedProperties: false > > This does not make sense without ref to dai-common, so this should point > you to missing ref. ACK, Will add missing dai-common reference. > >> + >> +examples: >> + - | >> + codec { >> + compatible = "qcom,wcd9370-codec"; >> + pinctrl-names = "default", "sleep"; >> + pinctrl-0 = <&wcd_reset_n>; >> + pinctrl-1 = <&wcd_reset_n_sleep>; >> + reset-gpios = <&tlmm 83 0>; >> + vdd-buck-supply = <&vreg_l17b_1p8>; >> + vdd-rxtx-supply = <&vreg_l18b_1p8>; >> + vdd-px-supply = <&vreg_l18b_1p8>; >> + vdd-mic-bias-supply = <&vreg_bob>; >> + qcom,micbias1-microvolt = <1800000>; >> + qcom,micbias2-microvolt = <1800000>; >> + qcom,micbias3-microvolt = <1800000>; >> + qcom,rx-device = <&wcd937x_rx>; >> + qcom,tx-device = <&wcd937x_tx>; >> + #sound-dai-cells = <1>; >> + }; >> + >> + /* ... */ >> + >> + soundwire@3210000 { >> + #address-cells = <2>; > > Drop this and other nodes. > > Best regards, > Krzysztof ACK, will use the qcom,wcd93xx-common.yaml file and will drop the common duplicate nodes Thanks and Regards, Rafi >
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml new file mode 100644 index 000000000000..b45f823af04f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9370 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9370 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. + +properties: + compatible: + enum: + - qcom,wcd9370-codec + + reset-gpios: + description: GPIO spec for reset line to use + maxItems: 1 + + vdd-buck-supply: + description: A reference to the 1.8V buck supply + + vdd-rxtx-supply: + description: A reference to the 1.8V rx supply + + vdd-px-supply: + description: A reference to the 1.8V I/O supply + + vdd-mic-bias-supply: + description: A reference to the 3.8V mic bias supply + + qcom,tx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire tx device phandle + + qcom,rx-device: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A reference to Soundwire rx device phandle + + qcom,micbias1-microvolt: + description: micbias1 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias2-microvolt: + description: micbias2 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias3-microvolt: + description: micbias3 voltage + minimum: 1800000 + maximum: 2850000 + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reset-gpios + - qcom,tx-device + - qcom,rx-device + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + codec { + compatible = "qcom,wcd9370-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + reset-gpios = <&tlmm 83 0>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-px-supply = <&vreg_l18b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,rx-device = <&wcd937x_rx>; + qcom,tx-device = <&wcd937x_tx>; + #sound-dai-cells = <1>; + }; + + /* ... */ + + soundwire@3210000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03210000 0x2000>; + wcd937x_rx: codec@0,4 { + compatible = "sdw20217010a00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x03230000 0x2000>; + wcd937x_tx: codec@0,3 { + compatible = "sdw20217010a00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 3 4 5>; + }; + }; + +...