| Message ID | 20240424024508.3857602-5-quic_tengfan@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: qcom: add AIM300 AIoT board support | expand |
On Wed, 24 Apr 2024 at 05:46, Tengfei Fan <quic_tengfan@quicinc.com> wrote: > > Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe, > I2C functions support. > Here is a diagram of AIM300 AIoT Carrie Board and SoM > +--------------------------------------------------+ > | AIM300 AIOT Carrier Board | > | | > | +-----------------+ | > |power----->| Fixed regulator |---------+ | > | +-----------------+ | | > | | | > | v VPH_PWR | > | +----------------------------------------------+ | > | | AIM300 SOM | | | > | | |VPH_PWR | | > | | v | | > | | +-------+ +--------+ +------+ | | > | | | UFS | | QCS8550| |PMIC | | | > | | +-------+ +--------+ +------+ | | > | | | | > | +----------------------------------------------+ | > | | > | +----+ +------+ | > | |USB | | UART | | > | +----+ +------+ | > +--------------------------------------------------+ > > Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com> > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> > Co-developed-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com> > Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com> > Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/qcs8550-aim300-aiot.dts | 343 ++++++++++++++++++ > 2 files changed, 344 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f63abb43e9fe..c46c10d85697 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb > dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts > new file mode 100644 > index 000000000000..146bf6ea9e6a > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts > @@ -0,0 +1,343 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/leds/common.h> > +#include "qcs8550-aim300.dtsi" > +#include "pm8010.dtsi" > +#include "pmr735d_a.dtsi" > +#include "pmr735d_b.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT"; > + compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550", > + "qcom,sm8550"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&volume_up_n>; > + pinctrl-names = "default"; > + > + key-volume-up { > + label = "Volume Up"; > + debounce-interval = <15>; > + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; > + #address-cells = <1>; > + #size-cells = <0>; > + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_hs_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss_in: endpoint { > + remote-endpoint = <&redriver_ss_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + pmic_glink_sbu: endpoint { > + remote-endpoint = <&fsa4480_sbu_mux>; > + }; > + }; > + }; > + }; > + }; > + > + vph_pwr: regulator-vph-pwr { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + }; > + > + regulators-3 { > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + }; > + > + regulators-4 { > + vdd-s4-supply = <&vph_pwr>; > + }; > + > + regulators-5 { > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + }; > +}; > + > +&i2c_hub_2 { > + status = "okay"; > + > + typec-mux@42 { > + compatible = "fcs,fsa4480"; > + reg = <0x42>; > + > + vcc-supply = <&vreg_bob1>; > + > + mode-switch; > + orientation-switch; > + > + port { > + fsa4480_sbu_mux: endpoint { > + remote-endpoint = <&pmic_glink_sbu>; > + }; > + }; > + }; > + > + typec-retimer@1c { > + compatible = "onnn,nb7vpq904m"; > + reg = <0x1c>; > + > + vcc-supply = <&vreg_l15b_1p8>; > + > + orientation-switch; > + retimer-switch; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + redriver_ss_out: endpoint { > + remote-endpoint = <&pmic_glink_ss_in>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + redriver_ss_in: endpoint { > + data-lanes = <3 2 1 0>; > + remote-endpoint = <&usb_dp_qmpphy_out>; > + }; > + }; > + }; > + }; > +}; > + > +&mdss_dsi0 { > + status = "okay"; > + > + panel@0 { > + compatible = "visionox,vtdr6130"; > + reg = <0>; > + > + pinctrl-0 = <&dsi_active>, <&te_active>; > + pinctrl-1 = <&dsi_suspend>, <&te_suspend>; > + pinctrl-names = "default", "sleep"; > + > + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; > + > + vci-supply = <&vreg_l13b_3p0>; > + vdd-supply = <&vreg_l11b_1p2>; > + vddio-supply = <&vreg_l12b_1p8>; > + > + port { > + panel0_in: endpoint { > + remote-endpoint = <&mdss_dsi0_out>; > + }; > + }; > + }; > +}; > + > +&mdss_dsi0_out { > + remote-endpoint = <&panel0_in>; > + data-lanes = <0 1 2 3>; > +}; > + > +&mdss_dsi0_phy { > + status = "okay"; > +}; > + > +&pcie0 { > + pinctrl-0 = <&pcie0_default_state>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie0_phy { > + status = "okay"; > +}; > + > +&pcie1 { > + pinctrl-0 = <&pcie1_default_state>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie1_phy { > + status = "okay"; > +}; > + > +&pm8550_gpios { > + volume_up_n: volume-up-n-state { > + pins = "gpio6"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = <KEY_VOLUMEDOWN>; > + > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/qcs8550/adsp.mbn", > + "qcom/qcs8550/adsp_dtbs.elf"; > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/qcs8550/cdsp.mbn", > + "qcom/qcs8550/cdsp_dtbs.elf"; > + status = "okay"; > +}; > + > +&swr1 { > + status = "okay"; > +}; > + > +&swr2 { > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <32 8>; > + > + dsi_active: dsi-active-state { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + dsi_suspend: dsi-suspend-state { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + te_active: te-active-state { > + pins = "gpio86"; > + function = "mdp_vsync"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + te_suspend: te-suspend-state { > + pins = "gpio86"; > + function = "mdp_vsync"; > + drive-strength = <2>; > + bias-pull-down; > + }; > +}; > + > +&uart7 { > + status = "okay"; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "otg"; OTG is default and can be dropped. > + usb-role-switch; Please move to SoC dtsi and drop from board files. > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_hs_in>; > +}; > + > +&usb_1_dwc3_ss { > + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; This too. > +}; > + > +&usb_1_hsphy { > + status = "okay"; > +}; > + > +&usb_dp_qmpphy { > + orientation-switch; This too > + > + status = "okay"; > +}; > + > +&usb_dp_qmpphy_out { > + remote-endpoint = <&redriver_ss_in>; > +}; > + > +&usb_dp_qmpphy_usb_ss_in { > + remote-endpoint = <&usb_1_dwc3_ss>; And this. > +}; > -- > 2.25.1 >
On 4/25/2024 7:50 AM, Dmitry Baryshkov wrote: > On Wed, 24 Apr 2024 at 05:46, Tengfei Fan <quic_tengfan@quicinc.com> wrote: >> >> Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe, >> I2C functions support. >> Here is a diagram of AIM300 AIoT Carrie Board and SoM >> +--------------------------------------------------+ >> | AIM300 AIOT Carrier Board | >> | | >> | +-----------------+ | >> |power----->| Fixed regulator |---------+ | >> | +-----------------+ | | >> | | | >> | v VPH_PWR | >> | +----------------------------------------------+ | >> | | AIM300 SOM | | | >> | | |VPH_PWR | | >> | | v | | >> | | +-------+ +--------+ +------+ | | >> | | | UFS | | QCS8550| |PMIC | | | >> | | +-------+ +--------+ +------+ | | >> | | | | >> | +----------------------------------------------+ | >> | | >> | +----+ +------+ | >> | |USB | | UART | | >> | +----+ +------+ | >> +--------------------------------------------------+ >> >> Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com> >> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> >> Co-developed-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com> >> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com> >> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../boot/dts/qcom/qcs8550-aim300-aiot.dts | 343 ++++++++++++++++++ >> 2 files changed, 344 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index f63abb43e9fe..c46c10d85697 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb >> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts >> new file mode 100644 >> index 000000000000..146bf6ea9e6a >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts >> @@ -0,0 +1,343 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include <dt-bindings/leds/common.h> >> +#include "qcs8550-aim300.dtsi" >> +#include "pm8010.dtsi" >> +#include "pmr735d_a.dtsi" >> +#include "pmr735d_b.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT"; >> + compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550", >> + "qcom,sm8550"; >> + >> + aliases { >> + serial0 = &uart7; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + gpio-keys { >> + compatible = "gpio-keys"; >> + >> + pinctrl-0 = <&volume_up_n>; >> + pinctrl-names = "default"; >> + >> + key-volume-up { >> + label = "Volume Up"; >> + debounce-interval = <15>; >> + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; >> + linux,code = <KEY_VOLUMEUP>; >> + linux,can-disable; >> + wakeup-source; >> + }; >> + }; >> + >> + pmic-glink { >> + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; >> + >> + connector@0 { >> + compatible = "usb-c-connector"; >> + reg = <0>; >> + power-role = "dual"; >> + data-role = "dual"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + >> + pmic_glink_hs_in: endpoint { >> + remote-endpoint = <&usb_1_dwc3_hs>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + >> + pmic_glink_ss_in: endpoint { >> + remote-endpoint = <&redriver_ss_out>; >> + }; >> + }; >> + >> + port@2 { >> + reg = <2>; >> + >> + pmic_glink_sbu: endpoint { >> + remote-endpoint = <&fsa4480_sbu_mux>; >> + }; >> + }; >> + }; >> + }; >> + }; >> + >> + vph_pwr: regulator-vph-pwr { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-min-microvolt = <3700000>; >> + regulator-max-microvolt = <3700000>; >> + >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> +}; >> + >> +&apps_rsc { >> + regulators-0 { >> + vdd-bob1-supply = <&vph_pwr>; >> + vdd-bob2-supply = <&vph_pwr>; >> + }; >> + >> + regulators-3 { >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + }; >> + >> + regulators-4 { >> + vdd-s4-supply = <&vph_pwr>; >> + }; >> + >> + regulators-5 { >> + vdd-s1-supply = <&vph_pwr>; >> + vdd-s2-supply = <&vph_pwr>; >> + vdd-s3-supply = <&vph_pwr>; >> + vdd-s4-supply = <&vph_pwr>; >> + vdd-s5-supply = <&vph_pwr>; >> + vdd-s6-supply = <&vph_pwr>; >> + }; >> +}; >> + >> +&i2c_hub_2 { >> + status = "okay"; >> + >> + typec-mux@42 { >> + compatible = "fcs,fsa4480"; >> + reg = <0x42>; >> + >> + vcc-supply = <&vreg_bob1>; >> + >> + mode-switch; >> + orientation-switch; >> + >> + port { >> + fsa4480_sbu_mux: endpoint { >> + remote-endpoint = <&pmic_glink_sbu>; >> + }; >> + }; >> + }; >> + >> + typec-retimer@1c { >> + compatible = "onnn,nb7vpq904m"; >> + reg = <0x1c>; >> + >> + vcc-supply = <&vreg_l15b_1p8>; >> + >> + orientation-switch; >> + retimer-switch; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + >> + redriver_ss_out: endpoint { >> + remote-endpoint = <&pmic_glink_ss_in>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + >> + redriver_ss_in: endpoint { >> + data-lanes = <3 2 1 0>; >> + remote-endpoint = <&usb_dp_qmpphy_out>; >> + }; >> + }; >> + }; >> + }; >> +}; >> + >> +&mdss_dsi0 { >> + status = "okay"; >> + >> + panel@0 { >> + compatible = "visionox,vtdr6130"; >> + reg = <0>; >> + >> + pinctrl-0 = <&dsi_active>, <&te_active>; >> + pinctrl-1 = <&dsi_suspend>, <&te_suspend>; >> + pinctrl-names = "default", "sleep"; >> + >> + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; >> + >> + vci-supply = <&vreg_l13b_3p0>; >> + vdd-supply = <&vreg_l11b_1p2>; >> + vddio-supply = <&vreg_l12b_1p8>; >> + >> + port { >> + panel0_in: endpoint { >> + remote-endpoint = <&mdss_dsi0_out>; >> + }; >> + }; >> + }; >> +}; >> + >> +&mdss_dsi0_out { >> + remote-endpoint = <&panel0_in>; >> + data-lanes = <0 1 2 3>; >> +}; >> + >> +&mdss_dsi0_phy { >> + status = "okay"; >> +}; >> + >> +&pcie0 { >> + pinctrl-0 = <&pcie0_default_state>; >> + pinctrl-names = "default"; >> + >> + status = "okay"; >> +}; >> + >> +&pcie0_phy { >> + status = "okay"; >> +}; >> + >> +&pcie1 { >> + pinctrl-0 = <&pcie1_default_state>; >> + pinctrl-names = "default"; >> + >> + status = "okay"; >> +}; >> + >> +&pcie1_phy { >> + status = "okay"; >> +}; >> + >> +&pm8550_gpios { >> + volume_up_n: volume-up-n-state { >> + pins = "gpio6"; >> + function = "normal"; >> + power-source = <1>; >> + bias-pull-up; >> + input-enable; >> + }; >> +}; >> + >> +&pon_pwrkey { >> + status = "okay"; >> +}; >> + >> +&pon_resin { >> + linux,code = <KEY_VOLUMEDOWN>; >> + >> + status = "okay"; >> +}; >> + >> +&qupv3_id_0 { >> + status = "okay"; >> +}; >> + >> +&remoteproc_adsp { >> + firmware-name = "qcom/qcs8550/adsp.mbn", >> + "qcom/qcs8550/adsp_dtbs.elf"; >> + status = "okay"; >> +}; >> + >> +&remoteproc_cdsp { >> + firmware-name = "qcom/qcs8550/cdsp.mbn", >> + "qcom/qcs8550/cdsp_dtbs.elf"; >> + status = "okay"; >> +}; >> + >> +&swr1 { >> + status = "okay"; >> +}; >> + >> +&swr2 { >> + status = "okay"; >> +}; >> + >> +&tlmm { >> + gpio-reserved-ranges = <32 8>; >> + >> + dsi_active: dsi-active-state { >> + pins = "gpio133"; >> + function = "gpio"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> + >> + dsi_suspend: dsi-suspend-state { >> + pins = "gpio133"; >> + function = "gpio"; >> + drive-strength = <2>; >> + bias-pull-down; >> + }; >> + >> + te_active: te-active-state { >> + pins = "gpio86"; >> + function = "mdp_vsync"; >> + drive-strength = <2>; >> + bias-pull-down; >> + }; >> + >> + te_suspend: te-suspend-state { >> + pins = "gpio86"; >> + function = "mdp_vsync"; >> + drive-strength = <2>; >> + bias-pull-down; >> + }; >> +}; >> + >> +&uart7 { >> + status = "okay"; >> +}; >> + >> +&usb_1 { >> + status = "okay"; >> +}; >> + >> +&usb_1_dwc3 { >> + dr_mode = "otg"; > > OTG is default and can be dropped. OTG will be dropped. > >> + usb-role-switch; > > Please move to SoC dtsi and drop from board files. This will be moved to SoC dtsi. > >> +}; >> + >> +&usb_1_dwc3_hs { >> + remote-endpoint = <&pmic_glink_hs_in>; >> +}; >> + >> +&usb_1_dwc3_ss { >> + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; > > This too. This will be moved to SoC dtsi. > >> +}; >> + >> +&usb_1_hsphy { >> + status = "okay"; >> +}; >> + >> +&usb_dp_qmpphy { >> + orientation-switch; > > This too This will be moved to SoC dtsi. > >> + >> + status = "okay"; >> +}; >> + >> +&usb_dp_qmpphy_out { >> + remote-endpoint = <&redriver_ss_in>; >> +}; >> + >> +&usb_dp_qmpphy_usb_ss_in { >> + remote-endpoint = <&usb_1_dwc3_ss>; > > And this. This will be moved to SoC dtsi. > >> +}; >> -- >> 2.25.1 >> > >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f63abb43e9fe..c46c10d85697 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts new file mode 100644 index 000000000000..146bf6ea9e6a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "qcs8550-aim300.dtsi" +#include "pm8010.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT"; + compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550", + "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + debounce-interval = <15>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + }; + + regulators-3 { + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + }; + + regulators-4 { + vdd-s4-supply = <&vph_pwr>; + }; + + regulators-5 { + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + }; +}; + +&i2c_hub_2 { + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + vcc-supply = <&vreg_bob1>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + + typec-retimer@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + +&mdss_dsi0 { + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-0 = <&dsi_active>, <&te_active>; + pinctrl-1 = <&dsi_suspend>, <&te_suspend>; + pinctrl-names = "default", "sleep"; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vreg_l12b_1p8>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8550/adsp.mbn", + "qcom/qcs8550/adsp_dtbs.elf"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8550/cdsp.mbn", + "qcom/qcs8550/cdsp_dtbs.elf"; + status = "okay"; +}; + +&swr1 { + status = "okay"; +}; + +&swr2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; + + dsi_active: dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + dsi_suspend: dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + te_active: te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + te_suspend: te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_dp_qmpphy { + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +};