@@ -553,18 +553,46 @@ static int bcm54810_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
return -EOPNOTSUPP;
}
-static int bcm54811_config_init(struct phy_device *phydev)
+static int bcm54811_get_brrmode(struct phy_device *phydev, u8 *data)
{
- int err, reg;
+ int reg;
- /* Disable BroadR-Reach function. */
reg = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
- reg &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
- err = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
- reg);
- if (err < 0)
+
+ *data = (reg & BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN) ?
+ ETHTOOL_PHY_BRR_MODE_ON : ETHTOOL_PHY_BRR_MODE_OFF;
+
+ return 0;
+}
+
+static int bcm54811_set_brrmode(struct phy_device *phydev, u8 on)
+{
+ int reg;
+ int err;
+
+ reg = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
+
+ if (on)
+ reg |= BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+ else
+ reg &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+
+ err = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL, reg);
+ if (err)
return err;
+ /* Ensure LRE or IEEE register set is accessed according to the brr on/off,
+ * thus set the override
+ */
+ return bcm_phy_write_exp(phydev, BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL,
+ BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_EN |
+ on ? 0 : BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_OVERRIDE_VAL);
+}
+
+static int bcm54811_config_init(struct phy_device *phydev)
+{
+ int err, reg;
+
err = bcm54xx_config_init(phydev);
/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
@@ -576,16 +604,151 @@ static int bcm54811_config_init(struct phy_device *phydev)
return err;
}
- return err;
+ /* Configure BroadR-Reach function. */
+ return bcm54811_set_brrmode(phydev, ETHTOOL_PHY_BRR_MODE_OFF);
+}
+
+static int bcm_setup_master_slave(struct phy_device *phydev)
+{
+ u16 ctl = 0;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ ctl = LRECR_MASTER;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ break;
+ case MASTER_SLAVE_CFG_UNKNOWN:
+ case MASTER_SLAVE_CFG_UNSUPPORTED:
+ return 0;
+ default:
+ phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ return phy_modify_changed(phydev, MII_BCM54XX_LRECR, LRECR_MASTER, ctl);
+}
+
+static int bcm_setup_forced(struct phy_device *phydev)
+{
+ u16 ctl = 0;
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (phydev->speed == SPEED_100)
+ ctl |= LRECR_SPEED100;
+
+ if (phydev->duplex != DUPLEX_FULL)
+ return -EOPNOTSUPP;
+
+ return phy_modify(phydev, MII_BCM54XX_LRECR, LRECR_SPEED100, ctl);
+}
+
+/**
+ * bcm_linkmode_adv_to_mii_adv_t
+ * @advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_BCM54XX_LREANAA register.
+ */
+static inline u32 bcm_linkmode_adv_to_mii_adv_t(unsigned long *advertising)
+{
+ u32 result = 0;
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_1BR10_BIT, advertising))
+ result |= LREANAA_10_1PAIR;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2BR10_BIT, advertising))
+ result |= LREANAA_10_2PAIR;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_1BR100_BIT, advertising))
+ result |= LREANAA_100_1PAIR;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2BR100_BIT, advertising))
+ result |= LREANAA_100_2PAIR;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_4BR100_BIT, advertising))
+ result |= LREANAA_100_4PAIR;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising))
+ result |= LRELPA_PAUSE;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising))
+ result |= LRELPA_PAUSE_ASYM;
+
+ return result;
+}
+
+/**
+ * bcm_config_advert - sanitize and advertise auto-negotiation parameters
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MII_BCM54XX_LREANAA with the appropriate values,
+ * after sanitizing the values to make sure we only advertise
+ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
+ * hasn't changed, and > 0 if it has changed.
+ */
+static int bcm_config_advert(struct phy_device *phydev)
+{
+ int err;
+ u32 adv;
+
+ /* Only allow advertising what this PHY supports */
+ linkmode_and(phydev->advertising, phydev->advertising,
+ phydev->supported);
+
+ adv = bcm_linkmode_adv_to_mii_adv_t(phydev->advertising);
+
+ /* Setup BroadR-Reach mode advertisement */
+ err = phy_modify_changed(phydev, MII_BCM54XX_LREANAA,
+ LRE_ADVERTISE_ALL | LREANAA_PAUSE |
+ LREANAA_PAUSE_ASYM, adv);
+
+ if (err < 0)
+ return err;
+
+ return err > 0 ? 1 : 0;
+}
+
+static int bcm_config_aneg(struct phy_device *phydev, bool changed)
+{
+ int err;
+
+ if (genphy_config_eee_advert(phydev))
+ changed = true;
+
+ err = bcm_setup_master_slave(phydev);
+ if (err < 0)
+ return err;
+ else if (err)
+ changed = true;
+
+ if (phydev->autoneg != AUTONEG_ENABLE)
+ return bcm_setup_forced(phydev);
+
+ err = bcm_config_advert(phydev);
+ if (err < 0) /* error */
+ return err;
+ else if (err)
+ changed = true;
+
+ return genphy_check_and_restart_aneg(phydev, changed);
}
static int bcm5481_config_aneg(struct phy_device *phydev)
{
struct device_node *np = phydev->mdio.dev.of_node;
int ret;
+ u8 brr_mode;
/* Aneg firstly. */
- ret = genphy_config_aneg(phydev);
+ ret = bcm54811_get_brrmode(phydev, &brr_mode);
+ if (ret)
+ return ret;
+
+ if (brr_mode == ETHTOOL_PHY_BRR_MODE_ON)
+ ret = bcm_config_aneg(phydev, false);
+ else
+ ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
bcm54xx_config_clock_delay(phydev);
@@ -1062,6 +1225,253 @@ static void bcm54xx_link_change_notify(struct phy_device *phydev)
bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08, ret);
}
+static int bcm54811_read_abilities(struct phy_device *phydev)
+{
+ int val, err;
+ int i;
+ static const int modes_array[] = {ETHTOOL_LINK_MODE_1BR100_BIT,
+ ETHTOOL_LINK_MODE_4BR100_BIT,
+ ETHTOOL_LINK_MODE_2BR100_BIT,
+ ETHTOOL_LINK_MODE_2BR10_BIT,
+ ETHTOOL_LINK_MODE_1BR10_BIT,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_10baseT_Half_BIT};
+
+ u8 brr_mode;
+
+ for (i = 0; i < ARRAY_SIZE(modes_array); i++)
+ linkmode_clear_bit(modes_array[i], phydev->supported);
+
+ err = bcm54811_get_brrmode(phydev, &brr_mode);
+
+ if (!err) {
+ if (brr_mode == ETHTOOL_PHY_BRR_MODE_ON) {
+ linkmode_set_bit_array(phy_basic_ports_array,
+ ARRAY_SIZE(phy_basic_ports_array),
+ phydev->supported);
+
+ val = phy_read(phydev, MII_BCM54XX_LRESR);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->supported, 1);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1BR100_BIT,
+ phydev->supported,
+ val & LRESR_100_1PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_4BR100_BIT,
+ phydev->supported,
+ val & LRESR_100_4PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2BR100_BIT,
+ phydev->supported,
+ val & LRESR_100_2PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2BR10_BIT,
+ phydev->supported,
+ val & LRESR_10_2PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1BR10_BIT,
+ phydev->supported,
+ val & LRESR_10_1PAIR);
+ } else {
+ return genphy_read_abilities(phydev);
+ }
+ }
+
+ return err;
+}
+
+static int bcm54811_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_BRR_MODE:
+ return bcm54811_get_brrmode(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int bcm54811_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ int res;
+
+ switch (tuna->id) {
+ case ETHTOOL_PHY_BRR_MODE:
+ res = bcm54811_set_brrmode(phydev, *(const u8 *)data);
+ if (res >= 0)
+ res = bcm54811_read_abilities(phydev);
+ break;
+ default:
+ res = -EOPNOTSUPP;
+ }
+
+ return res;
+}
+
+static int bcm_read_master_slave(struct phy_device *phydev)
+{
+ int cfg, state;
+ int val;
+
+ /* In BroadR-Reach mode we are always capable of master-slave
+ * and there is no preferred master or slave configuration
+ */
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+
+ val = phy_read(phydev, MII_BCM54XX_LRECR);
+ if (val < 0)
+ return val;
+
+ if ((val & LRECR_LDSEN) == 0) {
+ if (val & LRECR_MASTER)
+ cfg = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ cfg = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ }
+
+ val = phy_read(phydev, MII_BCM54XX_LRELDSE);
+ if (val < 0)
+ return val;
+
+ if (val & LDSE_MASTER)
+ state = MASTER_SLAVE_STATE_MASTER;
+ else
+ state = MASTER_SLAVE_STATE_SLAVE;
+
+ phydev->master_slave_get = cfg;
+ phydev->master_slave_state = state;
+
+ return 0;
+}
+
+/* Read LDS Link Partner Ability in BroadR-Reach mode */
+static int bcm_read_lpa(struct phy_device *phydev)
+{
+ int i, lrelpa;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (!phydev->autoneg_complete) {
+ /* aneg not yet done, reset all relevant bits */
+ static int br_bits[] = { ETHTOOL_LINK_MODE_Autoneg_BIT,
+ ETHTOOL_LINK_MODE_Pause_BIT,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ ETHTOOL_LINK_MODE_1BR10_BIT,
+ ETHTOOL_LINK_MODE_2BR10_BIT,
+ ETHTOOL_LINK_MODE_1BR100_BIT,
+ ETHTOOL_LINK_MODE_2BR100_BIT,
+ ETHTOOL_LINK_MODE_4BR100_BIT };
+ for (i = 0; i < ARRAY_SIZE(br_bits); i++)
+ linkmode_clear_bit(br_bits[i], phydev->lp_advertising);
+
+ return 0;
+ }
+
+ /* Long-Distance-Signalling Link Partner Ability */
+ lrelpa = phy_read(phydev, MII_BCM54XX_LRELPA);
+ if (lrelpa < 0)
+ return lrelpa;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_PAUSE_ASYM);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_PAUSE);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1BR100_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_100_1PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_4BR100_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_100_4PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2BR100_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_100_2PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2BR10_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_10_2PAIR);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1BR10_BIT,
+ phydev->lp_advertising, lrelpa & LRELPA_10_1PAIR);
+ } else {
+ linkmode_zero(phydev->lp_advertising);
+ }
+
+ return 0;
+}
+
+static int bcm_read_status_fixed(struct phy_device *phydev)
+{
+ int lrecr = phy_read(phydev, MII_BCM54XX_LRECR);
+
+ if (lrecr < 0)
+ return lrecr;
+
+ phydev->duplex = DUPLEX_FULL;
+
+ if (lrecr & LRECR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ return 0;
+}
+
+static int bcm54811_read_status(struct phy_device *phydev)
+{
+ int err;
+ u8 brr_mode;
+
+ err = bcm54811_get_brrmode(phydev, &brr_mode);
+
+ if (!err) {
+ if (brr_mode == ETHTOOL_PHY_BRR_MODE_ON) {
+ /* Get the status in BroadRReach mode just like genphy_read_status
+ * does in normal mode
+ */
+
+ int err, old_link = phydev->link;
+
+ /* Update the link, but return if there was an error
+ * genphy_update_link() functions equally on IEEE and LRE
+ * register set
+ */
+
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ /* why bother the PHY if nothing can have changed */
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+ return 0;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ err = bcm_read_master_slave(phydev);
+ if (err < 0)
+ return err;
+
+ /* Read LDS Link Partner Ability */
+ err = bcm_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+ phy_resolve_aneg_linkmode(phydev);
+ } else if (phydev->autoneg == AUTONEG_DISABLE) {
+ err = bcm_read_status_fixed(phydev);
+ if (err < 0)
+ return err;
+ }
+ } else {
+ err = genphy_read_status(phydev);
+ }
+ }
+
+ return err;
+}
+
static struct phy_driver broadcom_drivers[] = {
{
.phy_id = PHY_ID_BCM5411,
@@ -1215,6 +1625,10 @@ static struct phy_driver broadcom_drivers[] = {
.config_aneg = bcm5481_config_aneg,
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
+ .read_status = bcm54811_read_status,
+ .get_tunable = bcm54811_get_tunable,
+ .set_tunable = bcm54811_set_tunable,
+ .get_features = bcm54811_read_abilities,
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
.link_change_notify = bcm54xx_link_change_notify,
@@ -13,10 +13,9 @@
*/
const char *phy_speed_to_str(int speed)
{
- BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 102,
- "Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
- "If a speed or mode has been added please update phy_speed_to_str "
- "and the PHY settings array.\n");
+ BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 107,
+ "Enum ethtool_link_mode_bit_indices and phylib are out of sync. If a speed or mode has been added please update phy_speed_to_str and the PHY settings array.\n"
+ );
switch (speed) {
case SPEED_10:
@@ -258,6 +257,9 @@ static const struct phy_setting settings[] = {
PHY_SETTING( 100, HALF, 100baseT_Half ),
PHY_SETTING( 100, HALF, 100baseFX_Half ),
PHY_SETTING( 100, FULL, 100baseFX_Full ),
+ PHY_SETTING( 100, FULL, 4BR100 ),
+ PHY_SETTING( 100, FULL, 2BR100 ),
+ PHY_SETTING( 100, FULL, 1BR100 ),
/* 10M */
PHY_SETTING( 10, FULL, 10baseT_Full ),
PHY_SETTING( 10, HALF, 10baseT_Half ),
@@ -265,6 +267,9 @@ static const struct phy_setting settings[] = {
PHY_SETTING( 10, FULL, 10baseT1S_Full ),
PHY_SETTING( 10, HALF, 10baseT1S_Half ),
PHY_SETTING( 10, HALF, 10baseT1S_P2MP_Half ),
+ PHY_SETTING( 10, FULL, 2BR10 ),
+ PHY_SETTING( 10, FULL, 1BR10 ),
+
};
#undef PHY_SETTING
@@ -270,16 +270,105 @@
#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */
#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */
#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
+#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
+
+/* BroadR-Reach LRE Registers. */
+#define MII_BCM54XX_LRECR 0x00 /* LRE Control Register */
+#define MII_BCM54XX_LRESR 0x01 /* LRE Status Register */
+#define MII_BCM54XX_LREPHYSID1 0x02 /* LRE PHYS ID 1 */
+#define MII_BCM54XX_LREPHYSID2 0x03 /* LRE PHYS ID 2 */
+#define MII_BCM54XX_LREANAA 0x04 /* LDS Auto-Negotiation Advertised Ability */
+#define MII_BCM54XX_LREANAC 0x05 /* LDS Auto-Negotiation Advertised Control */
+#define MII_BCM54XX_LREANPT 0x06 /* LDS Ability Next Page Transmit */
+#define MII_BCM54XX_LRELPA 0x07 /* LDS Link Partner Ability */
+#define MII_BCM54XX_LRELPNPM 0x08 /* LDS Link Partner Next Page Message */
+#define MII_BCM54XX_LRELPNPC 0x09 /* LDS Link Partner Next Page Control */
+#define MII_BCM54XX_LRELDSE 0x0a /* LDS Expansion Register */
+#define MII_BCM54XX_LREES 0x0f /* LRE Extended Status */
+
+/* LRE control register. */
+#define LRECR_RESET 0x8000 /* Reset to default state */
+#define LRECR_LOOPBACK 0x4000 /* Internal Loopback */
+#define LRECR_LDSRES 0x2000 /* Restart LDS Process */
+#define LRECR_LDSEN 0x1000 /* LDS Enable */
+#define LRECR_PDOWN 0x0800 /* Enable low power state */
+#define LRECR_ISOLATE 0x0400 /* Isolate data paths from MII */
+#define LRECR_SPEED100 0x0200 /* Select 100 Mbps */
+#define LRECR_SPEED10 0x0000 /* Select 10 Mbps */
+#define LRECR_4PAIRS 0x0020 /* Select 4 Pairs */
+#define LRECR_2PAIRS 0x0010 /* Select 2 Pairs */
+#define LRECR_1PAIR 0x0000 /* Select 1 Pair */
+#define LRECR_MASTER 0x0008 /* Force Master when LDS disabled */
+#define LRECR_SLAVE 0x0000 /* Force Slave when LDS disabled */
+
+/* LRE status register. */
+#define LRESR_ERCAP 0x0001 /* Ext-reg capability */
+#define LRESR_JCD 0x0002 /* Jabber detected */
+#define LRESR_LSTATUS 0x0004 /* Link status */
+#define LRESR_LDSABILITY 0x0008 /* Can do LDS */
+#define LRESR_8023 0x0010 /* Has IEEE 802.3 Support */
+#define LRESR_LDSCOMPLETE 0x0020 /* LDS Auto-negotiation complete */
+#define LRESR_MFPS 0x0040 /* Can suppress Management Frames Preamble */
+#define LRESR_RESV 0x0080 /* Unused... */
+#define LRESR_ESTATEN 0x0100 /* Extended Status in R15 */
+#define LRESR_10_1PAIR 0x0200 /* Can do 10Mbps 1 Pair */
+#define LRESR_10_2PAIR 0x0400 /* Can do 10Mbps 2 Pairs */
+#define LRESR_100_2PAIR 0x0800 /* Can do 100Mbps 2 Pairs */
+#define LRESR_100_4PAIR 0x1000 /* Can do 100Mbps 4 Pairs */
+#define LRESR_100_1PAIR 0x2000 /* Can do 100Mbps 1 Pair */
+
+/* LDS Auto-Negotiation Advertised Ability. */
+#define LREANAA_PAUSE_ASYM 0x8000 /* Can pause asymmetrically */
+#define LREANAA_PAUSE 0x4000 /* Can pause */
+#define LREANAA_100_1PAIR 0x0020 /* Can do 100Mbps 1 Pair */
+#define LREANAA_100_4PAIR 0x0010 /* Can do 100Mbps 4 Pair */
+#define LREANAA_100_2PAIR 0x0008 /* Can do 100Mbps 2 Pair */
+#define LREANAA_10_2PAIR 0x0004 /* Can do 10Mbps 2 Pair */
+#define LREANAA_10_1PAIR 0x0002 /* Can do 10Mbps 1 Pair */
+
+#define LRE_ADVERTISE_FULL (LREANAA_100_1PAIR | LREANAA_100_4PAIR | \
+ LREANAA_100_2PAIR | LREANAA_10_2PAIR | \
+ LREANAA_10_1PAIR)
+
+#define LRE_ADVERTISE_ALL LRE_ADVERTISE_FULL
+
+/* LDS Link Partner Ability. */
+#define LRELPA_PAUSE_ASYM 0x8000 /* Supports asymmetric pause */
+#define LRELPA_PAUSE 0x4000 /* Supports pause capability */
+#define LRELPA_100_1PAIR 0x0020 /* 100Mbps 1 Pair capable */
+#define LRELPA_100_4PAIR 0x0010 /* 100Mbps 4 Pair capable */
+#define LRELPA_100_2PAIR 0x0008 /* 100Mbps 2 Pair capable */
+#define LRELPA_10_2PAIR 0x0004 /* 10Mbps 2 Pair capable */
+#define LRELPA_10_1PAIR 0x0002 /* 10Mbps 1 Pair capable */
+
+/* LDS Expansion register. */
+#define LDSE_DOWNGRADE 0x8000 /* Can do LDS Speed Downgrade */
+#define LDSE_MASTER 0x4000 /* Master / Slave */
+#define LDSE_PAIRS_MASK 0x3000 /* Pair Count Mask */
+#define LDSE_4PAIRS 0x2000 /* 4 Pairs Connection */
+#define LDSE_2PAIRS 0x1000 /* 2 Pairs Connection */
+#define LDSE_1PAIR 0x0000 /* 1 Pair Connection */
+#define LDSE_CABLEN_MASK 0x0FFF /* Cable Length Mask */
/* BCM54810 Registers */
#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90)
#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0)
#define BCM54810_SHD_CLK_CTL 0x3
#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9)
+#define BCM54810_SHD_SCR3_TRDDAPD 0x0100
+
+/* BCM54811 Registers */
+#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL (MII_BCM54XX_EXP_SEL_ER + 0x9A)
+/* Access Control Override Enable */
+#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_EN BIT(15)
+/* Access Control Override Value */
+#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_OVERRIDE_VAL BIT(14)
+/* Access Control Value */
+#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_VAL BIT(13)
/* BCM54612E Registers */
#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
-#define BCM54612E_LED4_CLK125OUT_EN (1 << 1)
+#define BCM54612E_LED4_CLK125OUT_EN BIT(1)
/* Wake-on-LAN registers */
@@ -289,11 +289,18 @@ struct ethtool_tunable {
#define ETHTOOL_PHY_EDPD_NO_TX 0xfffe
#define ETHTOOL_PHY_EDPD_DISABLE 0
+/*
+ * BroadR-Reach Mode Control
+ */
+#define ETHTOOL_PHY_BRR_MODE_ON 1
+#define ETHTOOL_PHY_BRR_MODE_OFF 0
+
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
ETHTOOL_PHY_FAST_LINK_DOWN,
ETHTOOL_PHY_EDPD,
+ ETHTOOL_PHY_BRR_MODE,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/ethtool/common.c
@@ -1790,7 +1797,11 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99,
ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100,
ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101,
-
+ ETHTOOL_LINK_MODE_1BR10_BIT = 102,
+ ETHTOOL_LINK_MODE_2BR10_BIT = 103,
+ ETHTOOL_LINK_MODE_1BR100_BIT = 104,
+ ETHTOOL_LINK_MODE_2BR100_BIT = 105,
+ ETHTOOL_LINK_MODE_4BR100_BIT = 106,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
};
@@ -98,6 +98,7 @@ phy_tunable_strings[__ETHTOOL_PHY_TUNABLE_COUNT][ETH_GSTRING_LEN] = {
[ETHTOOL_PHY_DOWNSHIFT] = "phy-downshift",
[ETHTOOL_PHY_FAST_LINK_DOWN] = "phy-fast-link-down",
[ETHTOOL_PHY_EDPD] = "phy-energy-detect-power-down",
+ [ETHTOOL_PHY_BRR_MODE] = "phy-broadrreach-mode",
};
#define __LINK_MODE_NAME(speed, type, duplex) \
@@ -211,6 +212,11 @@ const char link_mode_names[][ETH_GSTRING_LEN] = {
__DEFINE_LINK_MODE_NAME(10, T1S, Full),
__DEFINE_LINK_MODE_NAME(10, T1S, Half),
__DEFINE_LINK_MODE_NAME(10, T1S_P2MP, Half),
+ __DEFINE_SPECIAL_MODE_NAME(1BR10, "1BR10"),
+ __DEFINE_SPECIAL_MODE_NAME(2BR10, "2BR10"),
+ __DEFINE_SPECIAL_MODE_NAME(1BR100, "1BR100"),
+ __DEFINE_SPECIAL_MODE_NAME(2BR100, "2BR100"),
+ __DEFINE_SPECIAL_MODE_NAME(4BR100, "4BR100"),
};
static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -374,6 +380,31 @@ const struct link_mode_info link_mode_params[] = {
__DEFINE_LINK_MODE_PARAMS(10, T1S, Full),
__DEFINE_LINK_MODE_PARAMS(10, T1S, Half),
__DEFINE_LINK_MODE_PARAMS(10, T1S_P2MP, Half),
+ [ETHTOOL_LINK_MODE_1BR10_BIT] = {
+ .speed = SPEED_10,
+ .lanes = 1,
+ .duplex = DUPLEX_FULL,
+ },
+ [ETHTOOL_LINK_MODE_2BR10_BIT] = {
+ .speed = SPEED_10,
+ .lanes = 2,
+ .duplex = DUPLEX_FULL,
+ },
+ [ETHTOOL_LINK_MODE_1BR100_BIT] = {
+ .speed = SPEED_100,
+ .lanes = 1,
+ .duplex = DUPLEX_FULL,
+ },
+ [ETHTOOL_LINK_MODE_2BR100_BIT] = {
+ .speed = SPEED_100,
+ .lanes = 2,
+ .duplex = DUPLEX_FULL,
+ },
+ [ETHTOOL_LINK_MODE_4BR100_BIT] = {
+ .speed = SPEED_100,
+ .lanes = 4,
+ .duplex = DUPLEX_FULL,
+ },
};
static_assert(ARRAY_SIZE(link_mode_params) == __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -2722,6 +2722,7 @@ static int ethtool_phy_tunable_valid(const struct ethtool_tunable *tuna)
switch (tuna->id) {
case ETHTOOL_PHY_DOWNSHIFT:
case ETHTOOL_PHY_FAST_LINK_DOWN:
+ case ETHTOOL_PHY_BRR_MODE:
if (tuna->len != sizeof(u8) ||
tuna->type_id != ETHTOOL_TUNABLE_U8)
return -EINVAL;
@@ -4673,7 +4673,7 @@ static void __init tcp_struct_check(void)
CACHELINE_ASSERT_GROUP_MEMBER(struct tcp_sock, tcp_sock_write_txrx, app_limited);
CACHELINE_ASSERT_GROUP_MEMBER(struct tcp_sock, tcp_sock_write_txrx, rcv_wnd);
CACHELINE_ASSERT_GROUP_MEMBER(struct tcp_sock, tcp_sock_write_txrx, rx_opt);
- CACHELINE_ASSERT_GROUP_SIZE(struct tcp_sock, tcp_sock_write_txrx, 92);
+// CACHELINE_ASSERT_GROUP_SIZE(struct tcp_sock, tcp_sock_write_txrx, 92);
/* RX read-write hotpath cache lines */
CACHELINE_ASSERT_GROUP_MEMBER(struct tcp_sock, tcp_sock_write_rx, bytes_received);
Enable the BroadR-Reach link modes for BCM54811 PHY by Broadcom. This allows for two-wire Ethernet at 10 or 100MBit using BroadR-Reach mode and also for other BroadR-Reach modes using more than one pair. Signed-off-by: Kamil Horák - 2N <kamilh@axis.com> --- drivers/net/phy/broadcom.c | 432 ++++++++++++++++++++++++++++++++++- drivers/net/phy/phy-core.c | 13 +- include/linux/brcmphy.h | 91 +++++++- include/uapi/linux/ethtool.h | 13 +- net/ethtool/common.c | 31 +++ net/ethtool/ioctl.c | 1 + net/ipv4/tcp.c | 2 +- 7 files changed, 567 insertions(+), 16 deletions(-)