| Message ID | 20240422091936.3714381-4-jens.wiklander@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Replay Protected Memory Block (RPMB) subsystem | expand |
On Mon, Apr 22, 2024 at 11:19:36AM +0200, Jens Wiklander wrote: > Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and > use an RPMB device via the RPMB subsystem instead of passing the RPMB > frames via tee-supplicant in user space. A fallback mechanism is kept to > route RPMB frames via tee-supplicant if the RPMB subsystem isn't > available. > > The OP-TEE RPC ABI is extended to support iterating over all RPMB > devices until one is found with the expected RPMB key already > programmed. I tested this with fTPM running as built-in TA in optee_os. The first user of the TA is u-boot. u-boot handles the RPMB requests. If the tpm-ftpm-tee kernel driver gets probed it triggers also some RPMB requests. However they are not handled by the new RPMB subsystem. I did some workaround (see below) but I guess this no good solution. Need to think longer about this.. > Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> > --- > drivers/tee/optee/core.c | 30 ++++ > drivers/tee/optee/device.c | 7 + > drivers/tee/optee/ffa_abi.c | 8 ++ > drivers/tee/optee/optee_private.h | 21 ++- > drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ > drivers/tee/optee/rpc.c | 232 ++++++++++++++++++++++++++++++ > drivers/tee/optee/smc_abi.c | 7 + > 7 files changed, 339 insertions(+), 1 deletion(-) > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > index 3aed554bc8d8..082691c10a90 100644 > --- a/drivers/tee/optee/core.c > +++ b/drivers/tee/optee/core.c > @@ -11,6 +11,7 @@ > #include <linux/io.h> > #include <linux/mm.h> > #include <linux/module.h> > +#include <linux/rpmb.h> > #include <linux/slab.h> > #include <linux/string.h> > #include <linux/tee_drv.h> > @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > shm->pages = NULL; > } > > +void optee_bus_scan_rpmb(struct work_struct *work) > +{ > + struct optee *optee = container_of(work, struct optee, > + rpmb_scan_bus_work); > + int ret; > + > + if (!optee->rpmb_scan_bus_done) { > + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); > + optee->rpmb_scan_bus_done = !ret; > + if (ret && ret != -ENODEV) > + pr_info("Scanning for RPMB device: ret %d\n", ret); > + } > +} > + > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > + void *data) > +{ > + struct optee *optee = container_of(intf, struct optee, rpmb_intf); > + > + if (action == RPMB_NOTIFY_ADD_DEVICE) > + schedule_work(&optee->rpmb_scan_bus_work); > + > + return 0; > +} > + > static void optee_bus_scan(struct work_struct *work) > { > WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); > @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx) > > void optee_remove_common(struct optee *optee) > { > + rpmb_interface_unregister(&optee->rpmb_intf); > + cancel_work_sync(&optee->rpmb_scan_bus_work); > /* Unregister OP-TEE specific client devices on TEE bus */ > optee_unregister_devices(); > > @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) > tee_shm_pool_free(optee->pool); > optee_supp_uninit(&optee->supp); > mutex_destroy(&optee->call_queue.mutex); > + rpmb_dev_put(optee->rpmb_dev); > + mutex_destroy(&optee->rpmb_dev_mutex); > } > > static int smc_abi_rc; > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c > index 4b1092127694..4274876857c8 100644 > --- a/drivers/tee/optee/device.c > +++ b/drivers/tee/optee/device.c > @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, > ret = tee_client_invoke_func(ctx, &inv_arg, param); > if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && > (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { > + /* > + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting > + * the list of device TAs that depends on RPMB but a usable > + * RPMB device isn't found. > + */ > + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) > + return -ENODEV; > pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", > inv_arg.ret); > return -EINVAL; > diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c > index ecb5eb079408..a8dfdb30b4e8 100644 > --- a/drivers/tee/optee/ffa_abi.c > +++ b/drivers/tee/optee/ffa_abi.c > @@ -7,6 +7,7 @@ > > #include <linux/arm_ffa.h> > #include <linux/errno.h> > +#include <linux/rpmb.h> > #include <linux/scatterlist.h> > #include <linux/sched.h> > #include <linux/slab.h> > @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > optee_cq_init(&optee->call_queue, 0); > optee_supp_init(&optee->supp); > optee_shm_arg_cache_init(optee, arg_cache_flags); > + mutex_init(&optee->rpmb_dev_mutex); > ffa_dev_set_drvdata(ffa_dev, optee); > ctx = teedev_open(optee->teedev); > if (IS_ERR(ctx)) { > @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > if (rc) > goto err_unregister_devices; > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > + rpmb_interface_register(&optee->rpmb_intf); > pr_info("initialized driver\n"); > return 0; > > @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > teedev_close_context(ctx); > err_rhashtable_free: > rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); > + rpmb_dev_put(optee->rpmb_dev); > + mutex_destroy(&optee->rpmb_dev_mutex); > + rpmb_interface_unregister(&optee->rpmb_intf); > optee_supp_uninit(&optee->supp); > mutex_destroy(&optee->call_queue.mutex); > mutex_destroy(&optee->ffa.mutex); > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h > index 7a5243c78b55..ae72f3dda1d2 100644 > --- a/drivers/tee/optee/optee_private.h > +++ b/drivers/tee/optee/optee_private.h > @@ -8,6 +8,7 @@ > > #include <linux/arm-smccc.h> > #include <linux/rhashtable.h> > +#include <linux/rpmb.h> > #include <linux/semaphore.h> > #include <linux/tee_drv.h> > #include <linux/types.h> > @@ -20,11 +21,13 @@ > /* Some Global Platform error codes used in this driver */ > #define TEEC_SUCCESS 0x00000000 > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 > +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 > #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C > #define TEEC_ERROR_BUSY 0xFFFF000D > #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 > +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003 > > #define TEEC_ORIGIN_COMMS 0x00000002 > > @@ -197,6 +200,12 @@ struct optee_ops { > * @notif: notification synchronization struct > * @supp: supplicant synchronization struct for RPC to supplicant > * @pool: shared memory pool > + * @mutex: mutex protecting @rpmb_dev > + * @rpmb_dev: current RPMB device or NULL > + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices > + * was already done > + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus > + * and register RPMB dependent optee drivers > * @rpc_param_count: If > 0 number of RPC parameters to make room for > * @scan_bus_done flag if device registation was already done. > * @scan_bus_work workq to scan optee bus and register optee drivers > @@ -215,9 +224,15 @@ struct optee { > struct optee_notif notif; > struct optee_supp supp; > struct tee_shm_pool *pool; > + /* Protects rpmb_dev pointer */ > + struct mutex rpmb_dev_mutex; > + struct rpmb_dev *rpmb_dev; > + struct notifier_block rpmb_intf; > unsigned int rpc_param_count; > - bool scan_bus_done; > + bool scan_bus_done; > + bool rpmb_scan_bus_done; > struct work_struct scan_bus_work; > + struct work_struct rpmb_scan_bus_work; > }; > > struct optee_session { > @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); > > #define PTA_CMD_GET_DEVICES 0x0 > #define PTA_CMD_GET_DEVICES_SUPP 0x1 > +#define PTA_CMD_GET_DEVICES_RPMB 0x2 > int optee_enumerate_devices(u32 func); > void optee_unregister_devices(void); > +void optee_bus_scan_rpmb(struct work_struct *work); > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > + void *data); > > int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > size_t size, size_t align, > diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h > index f3f06e0994a7..f351a8ac69fc 100644 > --- a/drivers/tee/optee/optee_rpc_cmd.h > +++ b/drivers/tee/optee/optee_rpc_cmd.h > @@ -16,6 +16,14 @@ > * and sends responses. > */ > > +/* > + * Replay Protected Memory Block access > + * > + * [in] memref[0] Frames to device > + * [out] memref[1] Frames from device > + */ > +#define OPTEE_RPC_CMD_RPMB 1 > + > /* > * Get time > * > @@ -103,4 +111,31 @@ > /* I2C master control flags */ > #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0) > > +/* > + * Reset RPMB probing > + * > + * Releases an eventually already used RPMB devices and starts over searching > + * for RPMB devices. Returns the kind of shared memory to use in subsequent > + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. > + * > + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for > + * OPTEE_RPC_CMD_SHM_ALLOC > + */ > +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 > + > +/* > + * Probe next RPMB device > + * > + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* > + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" > + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" > + * [out] memref[1] Buffer with the raw CID > + */ > +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 > + > +/* Type of RPMB device */ > +#define OPTEE_RPC_RPMB_EMMC 0 > +#define OPTEE_RPC_RPMB_UFS 1 > +#define OPTEE_RPC_RPMB_NVME 2 > + > #endif /*__OPTEE_RPC_CMD_H*/ > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c > index e69bc6380683..a3e4c1830f39 100644 > --- a/drivers/tee/optee/rpc.c > +++ b/drivers/tee/optee/rpc.c > @@ -7,6 +7,7 @@ > > #include <linux/delay.h> > #include <linux/i2c.h> > +#include <linux/rpmb.h> > #include <linux/slab.h> > #include <linux/tee_drv.h> > #include "optee_private.h" > @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) > optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); > } > > +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, > + struct optee *optee, > + struct optee_msg_arg *arg) > +{ > + struct tee_param params[1]; > + > + if (!IS_ENABLED(CONFIG_RPMB)) { > + handle_rpc_supp_cmd(ctx, optee, arg); > + return; > + } > + > + if (arg->num_params != ARRAY_SIZE(params) || > + optee->ops->from_msg_param(optee, params, arg->num_params, > + arg->params) || > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > + return; > + } > + > + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; > + params[0].u.value.b = 0; > + params[0].u.value.c = 0; > + if (optee->ops->to_msg_param(optee, arg->params, > + arg->num_params, params)) { > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > + return; > + } > + > + mutex_lock(&optee->rpmb_dev_mutex); > + rpmb_dev_put(optee->rpmb_dev); > + optee->rpmb_dev = NULL; > + mutex_unlock(&optee->rpmb_dev_mutex); > + > + arg->ret = TEEC_SUCCESS; > +} > + > +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) > +{ > + switch (rtype) { > + case RPMB_TYPE_EMMC: > + return OPTEE_RPC_RPMB_EMMC; > + case RPMB_TYPE_UFS: > + return OPTEE_RPC_RPMB_UFS; > + case RPMB_TYPE_NVME: > + return OPTEE_RPC_RPMB_NVME; > + default: > + return -1; > + } > +} > + > +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) > +{ > + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; > +} > + > +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, > + struct optee *optee, > + struct optee_msg_arg *arg) > +{ > + struct rpmb_dev *rdev; > + struct tee_param params[2]; > + void *buf; > + > + if (!IS_REACHABLE(CONFIG_RPMB)) { > + handle_rpc_supp_cmd(ctx, optee, arg); > + return; > + } > + > + if (arg->num_params != ARRAY_SIZE(params) || > + optee->ops->from_msg_param(optee, params, arg->num_params, > + arg->params) || > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > + return; > + } > + buf = tee_shm_get_va(params[1].u.memref.shm, > + params[1].u.memref.shm_offs); > + if (!buf) { > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > + return; > + } > + > + mutex_lock(&optee->rpmb_dev_mutex); > + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); > + rpmb_dev_put(optee->rpmb_dev); > + optee->rpmb_dev = rdev; > + mutex_unlock(&optee->rpmb_dev_mutex); > + > + if (!rdev) { > + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; > + return; > + } > + > + if (params[1].u.memref.size < rdev->descr.dev_id_len) { > + arg->ret = TEEC_ERROR_SHORT_BUFFER; > + return; > + } > + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); > + params[1].u.memref.size = rdev->descr.dev_id_len; > + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); > + params[0].u.value.b = rdev->descr.capacity; > + params[0].u.value.c = rdev->descr.reliable_wr_count; > + if (optee->ops->to_msg_param(optee, arg->params, > + arg->num_params, params)) { > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > + return; > + } > + > + arg->ret = TEEC_SUCCESS; > +} > + > +/* Request */ > +struct rpmb_req { > + u16 cmd; > +#define RPMB_CMD_DATA_REQ 0x00 > +#define RPMB_CMD_GET_DEV_INFO 0x01 > + u16 dev_id; > + u16 block_count; > + /* Optional data frames (rpmb_data_frame) follow */ > +}; > + > +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) > + > +#define RPMB_CID_SZ 16 > + > +/* Response to device info request */ > +struct rpmb_dev_info { > + u8 cid[RPMB_CID_SZ]; > + u8 rpmb_size_mult; /* RPMB size in units of 128kB */ > + u8 reliable_wr_count; /* RPMB write size in units of 256 bytes */ > + u8 ret_code; > +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00 > +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01 > +}; > + > +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size) > +{ > + struct rpmb_dev_info *dev_info; > + > + if (rsp_size != sizeof(*dev_info)) > + return TEEC_ERROR_BAD_PARAMETERS; > + > + dev_info = rsp; > + memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid)); > + dev_info->rpmb_size_mult = rdev->descr.capacity; > + dev_info->reliable_wr_count = rdev->descr.reliable_wr_count; > + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; > + > + return TEEC_SUCCESS; > +} > + > +/* > + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame > + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame > + */ > +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev, > + void *req, size_t req_size, > + void *rsp, size_t rsp_size) > +{ > + struct rpmb_req *sreq = req; > + int rc; > + > + if (req_size < sizeof(*sreq)) > + return TEEC_ERROR_BAD_PARAMETERS; > + > + switch (sreq->cmd) { > + case RPMB_CMD_DATA_REQ: > + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req), > + req_size - sizeof(struct rpmb_req), > + rsp, rsp_size); > + if (rc) > + return TEEC_ERROR_BAD_PARAMETERS; > + return TEEC_SUCCESS; > + case RPMB_CMD_GET_DEV_INFO: > + return get_dev_info(rdev, rsp, rsp_size); > + default: > + return TEEC_ERROR_BAD_PARAMETERS; > + } > +} > + > +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee, > + struct optee_msg_arg *arg) > +{ > + struct tee_param params[2]; > + struct rpmb_dev *rdev; > + void *p0, *p1; > + > + mutex_lock(&optee->rpmb_dev_mutex); > + rdev = rpmb_dev_get(optee->rpmb_dev); > + mutex_unlock(&optee->rpmb_dev_mutex); > + if (!rdev) { mutex_lock(&optee->rpmb_dev_mutex); rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); rpmb_dev_put(optee->rpmb_dev); optee->rpmb_dev = rdev; mutex_unlock(&optee->rpmb_dev_mutex); if (!rdev) { handle_rpc_supp_cmd(ctx, optee, arg); return; } > + } In optee_os core/pta/device.c:invoke_cmd(): case PTA_CMD_GET_DEVICES_RPMB: - res = tee_rpmb_init(); + res = tee_rpmb_reinit(); With tee_rpmb_reinit implemented like this: TEE_Result tee_rpmb_reinit(void) { TEE_Result res = rpmb_probe_reset(); if (res) { if (res != TEE_ERROR_NOT_SUPPORTED) return res; return legacy_rpmb_init(); } return tee_rpmb_init(); } > + if (arg->num_params != ARRAY_SIZE(params) || > + optee->ops->from_msg_param(optee, params, arg->num_params, > + arg->params) || > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > + goto out; > + } > + > + p0 = tee_shm_get_va(params[0].u.memref.shm, > + params[0].u.memref.shm_offs); > + p1 = tee_shm_get_va(params[1].u.memref.shm, > + params[1].u.memref.shm_offs); > + arg->ret = rpmb_process_request(optee, rdev, p0, > + params[0].u.memref.size, > + p1, params[1].u.memref.size); > + if (arg->ret) > + goto out; > + > + if (optee->ops->to_msg_param(optee, arg->params, > + arg->num_params, params)) > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > +out: > + rpmb_dev_put(rdev); > +} > + > void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, > struct optee_msg_arg *arg) > { > @@ -271,6 +494,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, > case OPTEE_RPC_CMD_I2C_TRANSFER: > handle_rpc_func_cmd_i2c_transfer(ctx, arg); > break; > + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: > + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); > + break; > + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: > + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); > + break; > + case OPTEE_RPC_CMD_RPMB: > + handle_rpc_func_rpmb(ctx, optee, arg); > + break; > default: > handle_rpc_supp_cmd(ctx, optee, arg); > } > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c > index a37f87087e5c..c23bcf35c8cb 100644 > --- a/drivers/tee/optee/smc_abi.c > +++ b/drivers/tee/optee/smc_abi.c > @@ -20,6 +20,7 @@ > #include <linux/of_irq.h> > #include <linux/of_platform.h> > #include <linux/platform_device.h> > +#include <linux/rpmb.h> > #include <linux/sched.h> > #include <linux/slab.h> > #include <linux/string.h> > @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) > optee->smc.memremaped_shm = memremaped_shm; > optee->pool = pool; > optee_shm_arg_cache_init(optee, arg_cache_flags); > + mutex_init(&optee->rpmb_dev_mutex); > > platform_set_drvdata(pdev, optee); > ctx = teedev_open(optee->teedev); > @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) > if (rc) > goto err_disable_shm_cache; > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > + rpmb_interface_register(&optee->rpmb_intf); > pr_info("initialized driver\n"); > return 0; > > @@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) > err_close_ctx: > teedev_close_context(ctx); > err_supp_uninit: > + rpmb_dev_put(optee->rpmb_dev); > + mutex_destroy(&optee->rpmb_dev_mutex); > optee_shm_arg_cache_uninit(optee); > optee_supp_uninit(&optee->supp); > mutex_destroy(&optee->call_queue.mutex); > -- > 2.34.1 >
On Thu, Apr 25, 2024 at 11:13 AM Manuel Traut <manut@mecka.net> wrote: > > On Mon, Apr 22, 2024 at 11:19:36AM +0200, Jens Wiklander wrote: > > Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and > > use an RPMB device via the RPMB subsystem instead of passing the RPMB > > frames via tee-supplicant in user space. A fallback mechanism is kept to > > route RPMB frames via tee-supplicant if the RPMB subsystem isn't > > available. > > > > The OP-TEE RPC ABI is extended to support iterating over all RPMB > > devices until one is found with the expected RPMB key already > > programmed. > > I tested this with fTPM running as built-in TA in optee_os. > The first user of the TA is u-boot. u-boot handles the RPMB requests. > > If the tpm-ftpm-tee kernel driver gets probed it triggers also some > RPMB requests. However they are not handled by the new RPMB subsystem. > > I did some workaround (see below) but I guess this no good solution. > Need to think longer about this.. That's interesting. Again, thanks for testing. > > > Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> > > --- > > drivers/tee/optee/core.c | 30 ++++ > > drivers/tee/optee/device.c | 7 + > > drivers/tee/optee/ffa_abi.c | 8 ++ > > drivers/tee/optee/optee_private.h | 21 ++- > > drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ > > drivers/tee/optee/rpc.c | 232 ++++++++++++++++++++++++++++++ > > drivers/tee/optee/smc_abi.c | 7 + > > 7 files changed, 339 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > index 3aed554bc8d8..082691c10a90 100644 > > --- a/drivers/tee/optee/core.c > > +++ b/drivers/tee/optee/core.c > > @@ -11,6 +11,7 @@ > > #include <linux/io.h> > > #include <linux/mm.h> > > #include <linux/module.h> > > +#include <linux/rpmb.h> > > #include <linux/slab.h> > > #include <linux/string.h> > > #include <linux/tee_drv.h> > > @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > > shm->pages = NULL; > > } > > > > +void optee_bus_scan_rpmb(struct work_struct *work) > > +{ > > + struct optee *optee = container_of(work, struct optee, > > + rpmb_scan_bus_work); > > + int ret; > > + > > + if (!optee->rpmb_scan_bus_done) { > > + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); > > + optee->rpmb_scan_bus_done = !ret; > > + if (ret && ret != -ENODEV) > > + pr_info("Scanning for RPMB device: ret %d\n", ret); > > + } > > +} > > + > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > > + void *data) > > +{ > > + struct optee *optee = container_of(intf, struct optee, rpmb_intf); > > + > > + if (action == RPMB_NOTIFY_ADD_DEVICE) > > + schedule_work(&optee->rpmb_scan_bus_work); > > + > > + return 0; > > +} > > + > > static void optee_bus_scan(struct work_struct *work) > > { > > WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); > > @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx) > > > > void optee_remove_common(struct optee *optee) > > { > > + rpmb_interface_unregister(&optee->rpmb_intf); > > + cancel_work_sync(&optee->rpmb_scan_bus_work); > > /* Unregister OP-TEE specific client devices on TEE bus */ > > optee_unregister_devices(); > > > > @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) > > tee_shm_pool_free(optee->pool); > > optee_supp_uninit(&optee->supp); > > mutex_destroy(&optee->call_queue.mutex); > > + rpmb_dev_put(optee->rpmb_dev); > > + mutex_destroy(&optee->rpmb_dev_mutex); > > } > > > > static int smc_abi_rc; > > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c > > index 4b1092127694..4274876857c8 100644 > > --- a/drivers/tee/optee/device.c > > +++ b/drivers/tee/optee/device.c > > @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, > > ret = tee_client_invoke_func(ctx, &inv_arg, param); > > if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && > > (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { > > + /* > > + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting > > + * the list of device TAs that depends on RPMB but a usable > > + * RPMB device isn't found. > > + */ > > + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) > > + return -ENODEV; > > pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", > > inv_arg.ret); > > return -EINVAL; > > diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c > > index ecb5eb079408..a8dfdb30b4e8 100644 > > --- a/drivers/tee/optee/ffa_abi.c > > +++ b/drivers/tee/optee/ffa_abi.c > > @@ -7,6 +7,7 @@ > > > > #include <linux/arm_ffa.h> > > #include <linux/errno.h> > > +#include <linux/rpmb.h> > > #include <linux/scatterlist.h> > > #include <linux/sched.h> > > #include <linux/slab.h> > > @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > optee_cq_init(&optee->call_queue, 0); > > optee_supp_init(&optee->supp); > > optee_shm_arg_cache_init(optee, arg_cache_flags); > > + mutex_init(&optee->rpmb_dev_mutex); > > ffa_dev_set_drvdata(ffa_dev, optee); > > ctx = teedev_open(optee->teedev); > > if (IS_ERR(ctx)) { > > @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > if (rc) > > goto err_unregister_devices; > > > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > > + rpmb_interface_register(&optee->rpmb_intf); > > pr_info("initialized driver\n"); > > return 0; > > > > @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > teedev_close_context(ctx); > > err_rhashtable_free: > > rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); > > + rpmb_dev_put(optee->rpmb_dev); > > + mutex_destroy(&optee->rpmb_dev_mutex); > > + rpmb_interface_unregister(&optee->rpmb_intf); > > optee_supp_uninit(&optee->supp); > > mutex_destroy(&optee->call_queue.mutex); > > mutex_destroy(&optee->ffa.mutex); > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h > > index 7a5243c78b55..ae72f3dda1d2 100644 > > --- a/drivers/tee/optee/optee_private.h > > +++ b/drivers/tee/optee/optee_private.h > > @@ -8,6 +8,7 @@ > > > > #include <linux/arm-smccc.h> > > #include <linux/rhashtable.h> > > +#include <linux/rpmb.h> > > #include <linux/semaphore.h> > > #include <linux/tee_drv.h> > > #include <linux/types.h> > > @@ -20,11 +21,13 @@ > > /* Some Global Platform error codes used in this driver */ > > #define TEEC_SUCCESS 0x00000000 > > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 > > +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 > > #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A > > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E > > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C > > #define TEEC_ERROR_BUSY 0xFFFF000D > > #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 > > +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003 > > > > #define TEEC_ORIGIN_COMMS 0x00000002 > > > > @@ -197,6 +200,12 @@ struct optee_ops { > > * @notif: notification synchronization struct > > * @supp: supplicant synchronization struct for RPC to supplicant > > * @pool: shared memory pool > > + * @mutex: mutex protecting @rpmb_dev > > + * @rpmb_dev: current RPMB device or NULL > > + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices > > + * was already done > > + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus > > + * and register RPMB dependent optee drivers > > * @rpc_param_count: If > 0 number of RPC parameters to make room for > > * @scan_bus_done flag if device registation was already done. > > * @scan_bus_work workq to scan optee bus and register optee drivers > > @@ -215,9 +224,15 @@ struct optee { > > struct optee_notif notif; > > struct optee_supp supp; > > struct tee_shm_pool *pool; > > + /* Protects rpmb_dev pointer */ > > + struct mutex rpmb_dev_mutex; > > + struct rpmb_dev *rpmb_dev; > > + struct notifier_block rpmb_intf; > > unsigned int rpc_param_count; > > - bool scan_bus_done; > > + bool scan_bus_done; > > + bool rpmb_scan_bus_done; > > struct work_struct scan_bus_work; > > + struct work_struct rpmb_scan_bus_work; > > }; > > > > struct optee_session { > > @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); > > > > #define PTA_CMD_GET_DEVICES 0x0 > > #define PTA_CMD_GET_DEVICES_SUPP 0x1 > > +#define PTA_CMD_GET_DEVICES_RPMB 0x2 > > int optee_enumerate_devices(u32 func); > > void optee_unregister_devices(void); > > +void optee_bus_scan_rpmb(struct work_struct *work); > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > > + void *data); > > > > int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > > size_t size, size_t align, > > diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h > > index f3f06e0994a7..f351a8ac69fc 100644 > > --- a/drivers/tee/optee/optee_rpc_cmd.h > > +++ b/drivers/tee/optee/optee_rpc_cmd.h > > @@ -16,6 +16,14 @@ > > * and sends responses. > > */ > > > > +/* > > + * Replay Protected Memory Block access > > + * > > + * [in] memref[0] Frames to device > > + * [out] memref[1] Frames from device > > + */ > > +#define OPTEE_RPC_CMD_RPMB 1 > > + > > /* > > * Get time > > * > > @@ -103,4 +111,31 @@ > > /* I2C master control flags */ > > #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0) > > > > +/* > > + * Reset RPMB probing > > + * > > + * Releases an eventually already used RPMB devices and starts over searching > > + * for RPMB devices. Returns the kind of shared memory to use in subsequent > > + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. > > + * > > + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for > > + * OPTEE_RPC_CMD_SHM_ALLOC > > + */ > > +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 > > + > > +/* > > + * Probe next RPMB device > > + * > > + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* > > + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" > > + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" > > + * [out] memref[1] Buffer with the raw CID > > + */ > > +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 > > + > > +/* Type of RPMB device */ > > +#define OPTEE_RPC_RPMB_EMMC 0 > > +#define OPTEE_RPC_RPMB_UFS 1 > > +#define OPTEE_RPC_RPMB_NVME 2 > > + > > #endif /*__OPTEE_RPC_CMD_H*/ > > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c > > index e69bc6380683..a3e4c1830f39 100644 > > --- a/drivers/tee/optee/rpc.c > > +++ b/drivers/tee/optee/rpc.c > > @@ -7,6 +7,7 @@ > > > > #include <linux/delay.h> > > #include <linux/i2c.h> > > +#include <linux/rpmb.h> > > #include <linux/slab.h> > > #include <linux/tee_drv.h> > > #include "optee_private.h" > > @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) > > optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); > > } > > > > +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, > > + struct optee *optee, > > + struct optee_msg_arg *arg) > > +{ > > + struct tee_param params[1]; > > + > > + if (!IS_ENABLED(CONFIG_RPMB)) { > > + handle_rpc_supp_cmd(ctx, optee, arg); > > + return; > > + } > > + > > + if (arg->num_params != ARRAY_SIZE(params) || > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > + arg->params) || > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > + return; > > + } > > + > > + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; > > + params[0].u.value.b = 0; > > + params[0].u.value.c = 0; > > + if (optee->ops->to_msg_param(optee, arg->params, > > + arg->num_params, params)) { > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > + return; > > + } > > + > > + mutex_lock(&optee->rpmb_dev_mutex); > > + rpmb_dev_put(optee->rpmb_dev); > > + optee->rpmb_dev = NULL; > > + mutex_unlock(&optee->rpmb_dev_mutex); > > + > > + arg->ret = TEEC_SUCCESS; > > +} > > + > > +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) > > +{ > > + switch (rtype) { > > + case RPMB_TYPE_EMMC: > > + return OPTEE_RPC_RPMB_EMMC; > > + case RPMB_TYPE_UFS: > > + return OPTEE_RPC_RPMB_UFS; > > + case RPMB_TYPE_NVME: > > + return OPTEE_RPC_RPMB_NVME; > > + default: > > + return -1; > > + } > > +} > > + > > +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) > > +{ > > + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; > > +} > > + > > +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, > > + struct optee *optee, > > + struct optee_msg_arg *arg) > > +{ > > + struct rpmb_dev *rdev; > > + struct tee_param params[2]; > > + void *buf; > > + > > + if (!IS_REACHABLE(CONFIG_RPMB)) { > > + handle_rpc_supp_cmd(ctx, optee, arg); > > + return; > > + } > > + > > + if (arg->num_params != ARRAY_SIZE(params) || > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > + arg->params) || > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || > > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > + return; > > + } > > + buf = tee_shm_get_va(params[1].u.memref.shm, > > + params[1].u.memref.shm_offs); > > + if (!buf) { > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > + return; > > + } > > + > > + mutex_lock(&optee->rpmb_dev_mutex); > > + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); > > + rpmb_dev_put(optee->rpmb_dev); > > + optee->rpmb_dev = rdev; > > + mutex_unlock(&optee->rpmb_dev_mutex); > > + > > + if (!rdev) { > > + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; > > + return; > > + } > > + > > + if (params[1].u.memref.size < rdev->descr.dev_id_len) { > > + arg->ret = TEEC_ERROR_SHORT_BUFFER; > > + return; > > + } > > + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); > > + params[1].u.memref.size = rdev->descr.dev_id_len; > > + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); > > + params[0].u.value.b = rdev->descr.capacity; > > + params[0].u.value.c = rdev->descr.reliable_wr_count; > > + if (optee->ops->to_msg_param(optee, arg->params, > > + arg->num_params, params)) { > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > + return; > > + } > > + > > + arg->ret = TEEC_SUCCESS; > > +} > > + > > +/* Request */ > > +struct rpmb_req { > > + u16 cmd; > > +#define RPMB_CMD_DATA_REQ 0x00 > > +#define RPMB_CMD_GET_DEV_INFO 0x01 > > + u16 dev_id; > > + u16 block_count; > > + /* Optional data frames (rpmb_data_frame) follow */ > > +}; > > + > > +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) > > + > > +#define RPMB_CID_SZ 16 > > + > > +/* Response to device info request */ > > +struct rpmb_dev_info { > > + u8 cid[RPMB_CID_SZ]; > > + u8 rpmb_size_mult; /* RPMB size in units of 128kB */ > > + u8 reliable_wr_count; /* RPMB write size in units of 256 bytes */ > > + u8 ret_code; > > +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00 > > +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01 > > +}; > > + > > +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size) > > +{ > > + struct rpmb_dev_info *dev_info; > > + > > + if (rsp_size != sizeof(*dev_info)) > > + return TEEC_ERROR_BAD_PARAMETERS; > > + > > + dev_info = rsp; > > + memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid)); > > + dev_info->rpmb_size_mult = rdev->descr.capacity; > > + dev_info->reliable_wr_count = rdev->descr.reliable_wr_count; > > + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; > > + > > + return TEEC_SUCCESS; > > +} > > + > > +/* > > + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame > > + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame > > + */ > > +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev, > > + void *req, size_t req_size, > > + void *rsp, size_t rsp_size) > > +{ > > + struct rpmb_req *sreq = req; > > + int rc; > > + > > + if (req_size < sizeof(*sreq)) > > + return TEEC_ERROR_BAD_PARAMETERS; > > + > > + switch (sreq->cmd) { > > + case RPMB_CMD_DATA_REQ: > > + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req), > > + req_size - sizeof(struct rpmb_req), > > + rsp, rsp_size); > > + if (rc) > > + return TEEC_ERROR_BAD_PARAMETERS; > > + return TEEC_SUCCESS; > > + case RPMB_CMD_GET_DEV_INFO: > > + return get_dev_info(rdev, rsp, rsp_size); > > + default: > > + return TEEC_ERROR_BAD_PARAMETERS; > > + } > > +} > > + > > +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee, > > + struct optee_msg_arg *arg) > > +{ > > + struct tee_param params[2]; > > + struct rpmb_dev *rdev; > > + void *p0, *p1; > > + > > + mutex_lock(&optee->rpmb_dev_mutex); > > + rdev = rpmb_dev_get(optee->rpmb_dev); > > + mutex_unlock(&optee->rpmb_dev_mutex); > > + if (!rdev) { > mutex_lock(&optee->rpmb_dev_mutex); > rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); > rpmb_dev_put(optee->rpmb_dev); > optee->rpmb_dev = rdev; > mutex_unlock(&optee->rpmb_dev_mutex); > > if (!rdev) { > handle_rpc_supp_cmd(ctx, optee, arg); > return; > } > > + } > > In optee_os core/pta/device.c:invoke_cmd(): > > case PTA_CMD_GET_DEVICES_RPMB: > - res = tee_rpmb_init(); > + res = tee_rpmb_reinit(); > > With tee_rpmb_reinit implemented like this: > > TEE_Result tee_rpmb_reinit(void) > { > TEE_Result res = rpmb_probe_reset(); > if (res) { > if (res != TEE_ERROR_NOT_SUPPORTED) > return res; > return legacy_rpmb_init(); > } > return tee_rpmb_init(); > } OP-TEE in the secure world could save the CID and reinitialize by searching for that specific device. Thanks, Jens > > > + if (arg->num_params != ARRAY_SIZE(params) || > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > + arg->params) || > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || > > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > + goto out; > > + } > > + > > + p0 = tee_shm_get_va(params[0].u.memref.shm, > > + params[0].u.memref.shm_offs); > > + p1 = tee_shm_get_va(params[1].u.memref.shm, > > + params[1].u.memref.shm_offs); > > + arg->ret = rpmb_process_request(optee, rdev, p0, > > + params[0].u.memref.size, > > + p1, params[1].u.memref.size); > > + if (arg->ret) > > + goto out; > > + > > + if (optee->ops->to_msg_param(optee, arg->params, > > + arg->num_params, params)) > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > +out: > > + rpmb_dev_put(rdev); > > +} > > + > > void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, > > struct optee_msg_arg *arg) > > { > > @@ -271,6 +494,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, > > case OPTEE_RPC_CMD_I2C_TRANSFER: > > handle_rpc_func_cmd_i2c_transfer(ctx, arg); > > break; > > + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: > > + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); > > + break; > > + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: > > + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); > > + break; > > + case OPTEE_RPC_CMD_RPMB: > > + handle_rpc_func_rpmb(ctx, optee, arg); > > + break; > > default: > > handle_rpc_supp_cmd(ctx, optee, arg); > > } > > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c > > index a37f87087e5c..c23bcf35c8cb 100644 > > --- a/drivers/tee/optee/smc_abi.c > > +++ b/drivers/tee/optee/smc_abi.c > > @@ -20,6 +20,7 @@ > > #include <linux/of_irq.h> > > #include <linux/of_platform.h> > > #include <linux/platform_device.h> > > +#include <linux/rpmb.h> > > #include <linux/sched.h> > > #include <linux/slab.h> > > #include <linux/string.h> > > @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) > > optee->smc.memremaped_shm = memremaped_shm; > > optee->pool = pool; > > optee_shm_arg_cache_init(optee, arg_cache_flags); > > + mutex_init(&optee->rpmb_dev_mutex); > > > > platform_set_drvdata(pdev, optee); > > ctx = teedev_open(optee->teedev); > > @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) > > if (rc) > > goto err_disable_shm_cache; > > > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > > + rpmb_interface_register(&optee->rpmb_intf); > > pr_info("initialized driver\n"); > > return 0; > > > > @@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) > > err_close_ctx: > > teedev_close_context(ctx); > > err_supp_uninit: > > + rpmb_dev_put(optee->rpmb_dev); > > + mutex_destroy(&optee->rpmb_dev_mutex); > > optee_shm_arg_cache_uninit(optee); > > optee_supp_uninit(&optee->supp); > > mutex_destroy(&optee->call_queue.mutex); > > -- > > 2.34.1 > >
On Fri, Apr 26, 2024 at 03:40:50PM +0200, Jens Wiklander wrote: > On Thu, Apr 25, 2024 at 11:13 AM Manuel Traut <manut@mecka.net> wrote: > > > > On Mon, Apr 22, 2024 at 11:19:36AM +0200, Jens Wiklander wrote: > > > Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and > > > use an RPMB device via the RPMB subsystem instead of passing the RPMB > > > frames via tee-supplicant in user space. A fallback mechanism is kept to > > > route RPMB frames via tee-supplicant if the RPMB subsystem isn't > > > available. > > > > > > The OP-TEE RPC ABI is extended to support iterating over all RPMB > > > devices until one is found with the expected RPMB key already > > > programmed. > > > > I tested this with fTPM running as built-in TA in optee_os. > > The first user of the TA is u-boot. u-boot handles the RPMB requests. > > > > If the tpm-ftpm-tee kernel driver gets probed it triggers also some > > RPMB requests. However they are not handled by the new RPMB subsystem. > > > > I did some workaround (see below) but I guess this no good solution. > > Need to think longer about this.. > > That's interesting. Again, thanks for testing. > > > > > > Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> > > > --- > > > drivers/tee/optee/core.c | 30 ++++ > > > drivers/tee/optee/device.c | 7 + > > > drivers/tee/optee/ffa_abi.c | 8 ++ > > > drivers/tee/optee/optee_private.h | 21 ++- > > > drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ > > > drivers/tee/optee/rpc.c | 232 ++++++++++++++++++++++++++++++ > > > drivers/tee/optee/smc_abi.c | 7 + > > > 7 files changed, 339 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > > index 3aed554bc8d8..082691c10a90 100644 > > > --- a/drivers/tee/optee/core.c > > > +++ b/drivers/tee/optee/core.c > > > @@ -11,6 +11,7 @@ > > > #include <linux/io.h> > > > #include <linux/mm.h> > > > #include <linux/module.h> > > > +#include <linux/rpmb.h> > > > #include <linux/slab.h> > > > #include <linux/string.h> > > > #include <linux/tee_drv.h> > > > @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > > > shm->pages = NULL; > > > } > > > > > > +void optee_bus_scan_rpmb(struct work_struct *work) > > > +{ > > > + struct optee *optee = container_of(work, struct optee, > > > + rpmb_scan_bus_work); > > > + int ret; > > > + > > > + if (!optee->rpmb_scan_bus_done) { > > > + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); > > > + optee->rpmb_scan_bus_done = !ret; > > > + if (ret && ret != -ENODEV) > > > + pr_info("Scanning for RPMB device: ret %d\n", ret); > > > + } > > > +} > > > + > > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > > > + void *data) > > > +{ > > > + struct optee *optee = container_of(intf, struct optee, rpmb_intf); > > > + > > > + if (action == RPMB_NOTIFY_ADD_DEVICE) > > > + schedule_work(&optee->rpmb_scan_bus_work); > > > + > > > + return 0; > > > +} > > > + > > > static void optee_bus_scan(struct work_struct *work) > > > { > > > WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); > > > @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx) > > > > > > void optee_remove_common(struct optee *optee) > > > { > > > + rpmb_interface_unregister(&optee->rpmb_intf); > > > + cancel_work_sync(&optee->rpmb_scan_bus_work); > > > /* Unregister OP-TEE specific client devices on TEE bus */ > > > optee_unregister_devices(); > > > > > > @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) > > > tee_shm_pool_free(optee->pool); > > > optee_supp_uninit(&optee->supp); > > > mutex_destroy(&optee->call_queue.mutex); > > > + rpmb_dev_put(optee->rpmb_dev); > > > + mutex_destroy(&optee->rpmb_dev_mutex); > > > } > > > > > > static int smc_abi_rc; > > > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c > > > index 4b1092127694..4274876857c8 100644 > > > --- a/drivers/tee/optee/device.c > > > +++ b/drivers/tee/optee/device.c > > > @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, > > > ret = tee_client_invoke_func(ctx, &inv_arg, param); > > > if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && > > > (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { > > > + /* > > > + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting > > > + * the list of device TAs that depends on RPMB but a usable > > > + * RPMB device isn't found. > > > + */ > > > + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) > > > + return -ENODEV; > > > pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", > > > inv_arg.ret); > > > return -EINVAL; > > > diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c > > > index ecb5eb079408..a8dfdb30b4e8 100644 > > > --- a/drivers/tee/optee/ffa_abi.c > > > +++ b/drivers/tee/optee/ffa_abi.c > > > @@ -7,6 +7,7 @@ > > > > > > #include <linux/arm_ffa.h> > > > #include <linux/errno.h> > > > +#include <linux/rpmb.h> > > > #include <linux/scatterlist.h> > > > #include <linux/sched.h> > > > #include <linux/slab.h> > > > @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > > optee_cq_init(&optee->call_queue, 0); > > > optee_supp_init(&optee->supp); > > > optee_shm_arg_cache_init(optee, arg_cache_flags); > > > + mutex_init(&optee->rpmb_dev_mutex); > > > ffa_dev_set_drvdata(ffa_dev, optee); > > > ctx = teedev_open(optee->teedev); > > > if (IS_ERR(ctx)) { > > > @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > > if (rc) > > > goto err_unregister_devices; > > > > > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > > > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > > > + rpmb_interface_register(&optee->rpmb_intf); > > > pr_info("initialized driver\n"); > > > return 0; > > > > > > @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > > teedev_close_context(ctx); > > > err_rhashtable_free: > > > rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); > > > + rpmb_dev_put(optee->rpmb_dev); > > > + mutex_destroy(&optee->rpmb_dev_mutex); > > > + rpmb_interface_unregister(&optee->rpmb_intf); > > > optee_supp_uninit(&optee->supp); > > > mutex_destroy(&optee->call_queue.mutex); > > > mutex_destroy(&optee->ffa.mutex); > > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h > > > index 7a5243c78b55..ae72f3dda1d2 100644 > > > --- a/drivers/tee/optee/optee_private.h > > > +++ b/drivers/tee/optee/optee_private.h > > > @@ -8,6 +8,7 @@ > > > > > > #include <linux/arm-smccc.h> > > > #include <linux/rhashtable.h> > > > +#include <linux/rpmb.h> > > > #include <linux/semaphore.h> > > > #include <linux/tee_drv.h> > > > #include <linux/types.h> > > > @@ -20,11 +21,13 @@ > > > /* Some Global Platform error codes used in this driver */ > > > #define TEEC_SUCCESS 0x00000000 > > > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 > > > +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 > > > #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A > > > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E > > > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C > > > #define TEEC_ERROR_BUSY 0xFFFF000D > > > #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 > > > +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003 > > > > > > #define TEEC_ORIGIN_COMMS 0x00000002 > > > > > > @@ -197,6 +200,12 @@ struct optee_ops { > > > * @notif: notification synchronization struct > > > * @supp: supplicant synchronization struct for RPC to supplicant > > > * @pool: shared memory pool > > > + * @mutex: mutex protecting @rpmb_dev > > > + * @rpmb_dev: current RPMB device or NULL > > > + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices > > > + * was already done > > > + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus > > > + * and register RPMB dependent optee drivers > > > * @rpc_param_count: If > 0 number of RPC parameters to make room for > > > * @scan_bus_done flag if device registation was already done. > > > * @scan_bus_work workq to scan optee bus and register optee drivers > > > @@ -215,9 +224,15 @@ struct optee { > > > struct optee_notif notif; > > > struct optee_supp supp; > > > struct tee_shm_pool *pool; > > > + /* Protects rpmb_dev pointer */ > > > + struct mutex rpmb_dev_mutex; > > > + struct rpmb_dev *rpmb_dev; > > > + struct notifier_block rpmb_intf; > > > unsigned int rpc_param_count; > > > - bool scan_bus_done; > > > + bool scan_bus_done; > > > + bool rpmb_scan_bus_done; > > > struct work_struct scan_bus_work; > > > + struct work_struct rpmb_scan_bus_work; > > > }; > > > > > > struct optee_session { > > > @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); > > > > > > #define PTA_CMD_GET_DEVICES 0x0 > > > #define PTA_CMD_GET_DEVICES_SUPP 0x1 > > > +#define PTA_CMD_GET_DEVICES_RPMB 0x2 > > > int optee_enumerate_devices(u32 func); > > > void optee_unregister_devices(void); > > > +void optee_bus_scan_rpmb(struct work_struct *work); > > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > > > + void *data); > > > > > > int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > > > size_t size, size_t align, > > > diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h > > > index f3f06e0994a7..f351a8ac69fc 100644 > > > --- a/drivers/tee/optee/optee_rpc_cmd.h > > > +++ b/drivers/tee/optee/optee_rpc_cmd.h > > > @@ -16,6 +16,14 @@ > > > * and sends responses. > > > */ > > > > > > +/* > > > + * Replay Protected Memory Block access > > > + * > > > + * [in] memref[0] Frames to device > > > + * [out] memref[1] Frames from device > > > + */ > > > +#define OPTEE_RPC_CMD_RPMB 1 > > > + > > > /* > > > * Get time > > > * > > > @@ -103,4 +111,31 @@ > > > /* I2C master control flags */ > > > #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0) > > > > > > +/* > > > + * Reset RPMB probing > > > + * > > > + * Releases an eventually already used RPMB devices and starts over searching > > > + * for RPMB devices. Returns the kind of shared memory to use in subsequent > > > + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. > > > + * > > > + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for > > > + * OPTEE_RPC_CMD_SHM_ALLOC > > > + */ > > > +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 > > > + > > > +/* > > > + * Probe next RPMB device > > > + * > > > + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* > > > + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" > > > + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" > > > + * [out] memref[1] Buffer with the raw CID > > > + */ > > > +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 > > > + > > > +/* Type of RPMB device */ > > > +#define OPTEE_RPC_RPMB_EMMC 0 > > > +#define OPTEE_RPC_RPMB_UFS 1 > > > +#define OPTEE_RPC_RPMB_NVME 2 > > > + > > > #endif /*__OPTEE_RPC_CMD_H*/ > > > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c > > > index e69bc6380683..a3e4c1830f39 100644 > > > --- a/drivers/tee/optee/rpc.c > > > +++ b/drivers/tee/optee/rpc.c > > > @@ -7,6 +7,7 @@ > > > > > > #include <linux/delay.h> > > > #include <linux/i2c.h> > > > +#include <linux/rpmb.h> > > > #include <linux/slab.h> > > > #include <linux/tee_drv.h> > > > #include "optee_private.h" > > > @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) > > > optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); > > > } > > > > > > +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, > > > + struct optee *optee, > > > + struct optee_msg_arg *arg) > > > +{ > > > + struct tee_param params[1]; > > > + > > > + if (!IS_ENABLED(CONFIG_RPMB)) { > > > + handle_rpc_supp_cmd(ctx, optee, arg); > > > + return; > > > + } > > > + > > > + if (arg->num_params != ARRAY_SIZE(params) || > > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > > + arg->params) || > > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > + return; > > > + } > > > + > > > + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; > > > + params[0].u.value.b = 0; > > > + params[0].u.value.c = 0; > > > + if (optee->ops->to_msg_param(optee, arg->params, > > > + arg->num_params, params)) { > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > + return; > > > + } > > > + > > > + mutex_lock(&optee->rpmb_dev_mutex); > > > + rpmb_dev_put(optee->rpmb_dev); > > > + optee->rpmb_dev = NULL; > > > + mutex_unlock(&optee->rpmb_dev_mutex); > > > + > > > + arg->ret = TEEC_SUCCESS; > > > +} > > > + > > > +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) > > > +{ > > > + switch (rtype) { > > > + case RPMB_TYPE_EMMC: > > > + return OPTEE_RPC_RPMB_EMMC; > > > + case RPMB_TYPE_UFS: > > > + return OPTEE_RPC_RPMB_UFS; > > > + case RPMB_TYPE_NVME: > > > + return OPTEE_RPC_RPMB_NVME; > > > + default: > > > + return -1; > > > + } > > > +} > > > + > > > +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) > > > +{ > > > + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; > > > +} > > > + > > > +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, > > > + struct optee *optee, > > > + struct optee_msg_arg *arg) > > > +{ > > > + struct rpmb_dev *rdev; > > > + struct tee_param params[2]; > > > + void *buf; > > > + > > > + if (!IS_REACHABLE(CONFIG_RPMB)) { > > > + handle_rpc_supp_cmd(ctx, optee, arg); > > > + return; > > > + } > > > + > > > + if (arg->num_params != ARRAY_SIZE(params) || > > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > > + arg->params) || > > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || > > > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > + return; > > > + } > > > + buf = tee_shm_get_va(params[1].u.memref.shm, > > > + params[1].u.memref.shm_offs); > > > + if (!buf) { > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > + return; > > > + } > > > + > > > + mutex_lock(&optee->rpmb_dev_mutex); > > > + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); > > > + rpmb_dev_put(optee->rpmb_dev); > > > + optee->rpmb_dev = rdev; > > > + mutex_unlock(&optee->rpmb_dev_mutex); > > > + > > > + if (!rdev) { > > > + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; > > > + return; > > > + } > > > + > > > + if (params[1].u.memref.size < rdev->descr.dev_id_len) { > > > + arg->ret = TEEC_ERROR_SHORT_BUFFER; > > > + return; > > > + } > > > + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); > > > + params[1].u.memref.size = rdev->descr.dev_id_len; > > > + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); > > > + params[0].u.value.b = rdev->descr.capacity; > > > + params[0].u.value.c = rdev->descr.reliable_wr_count; > > > + if (optee->ops->to_msg_param(optee, arg->params, > > > + arg->num_params, params)) { > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > + return; > > > + } > > > + > > > + arg->ret = TEEC_SUCCESS; > > > +} > > > + > > > +/* Request */ > > > +struct rpmb_req { > > > + u16 cmd; > > > +#define RPMB_CMD_DATA_REQ 0x00 > > > +#define RPMB_CMD_GET_DEV_INFO 0x01 > > > + u16 dev_id; > > > + u16 block_count; > > > + /* Optional data frames (rpmb_data_frame) follow */ > > > +}; > > > + > > > +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) This is the root cause for the non page aligned buffer we discussed in v5 2/3 mmc: block: register RPMB partition with the RPMB subsystem > > > + > > > +#define RPMB_CID_SZ 16 > > > + > > > +/* Response to device info request */ > > > +struct rpmb_dev_info { > > > + u8 cid[RPMB_CID_SZ]; > > > + u8 rpmb_size_mult; /* RPMB size in units of 128kB */ > > > + u8 reliable_wr_count; /* RPMB write size in units of 256 bytes */ > > > + u8 ret_code; > > > +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00 > > > +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01 > > > +}; > > > + > > > +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size) > > > +{ > > > + struct rpmb_dev_info *dev_info; > > > + > > > + if (rsp_size != sizeof(*dev_info)) > > > + return TEEC_ERROR_BAD_PARAMETERS; > > > + > > > + dev_info = rsp; > > > + memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid)); > > > + dev_info->rpmb_size_mult = rdev->descr.capacity; > > > + dev_info->reliable_wr_count = rdev->descr.reliable_wr_count; > > > + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; > > > + > > > + return TEEC_SUCCESS; > > > +} > > > + > > > +/* > > > + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame > > > + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame > > > + */ > > > +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev, > > > + void *req, size_t req_size, > > > + void *rsp, size_t rsp_size) > > > +{ > > > + struct rpmb_req *sreq = req; > > > + int rc; > > > + > > > + if (req_size < sizeof(*sreq)) > > > + return TEEC_ERROR_BAD_PARAMETERS; > > > + > > > + switch (sreq->cmd) { > > > + case RPMB_CMD_DATA_REQ: > > > + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req), > > > + req_size - sizeof(struct rpmb_req), > > > + rsp, rsp_size); > > > + if (rc) > > > + return TEEC_ERROR_BAD_PARAMETERS; > > > + return TEEC_SUCCESS; > > > + case RPMB_CMD_GET_DEV_INFO: > > > + return get_dev_info(rdev, rsp, rsp_size); > > > + default: > > > + return TEEC_ERROR_BAD_PARAMETERS; > > > + } > > > +} > > > + > > > +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee, > > > + struct optee_msg_arg *arg) > > > +{ > > > + struct tee_param params[2]; > > > + struct rpmb_dev *rdev; > > > + void *p0, *p1; > > > + > > > + mutex_lock(&optee->rpmb_dev_mutex); > > > + rdev = rpmb_dev_get(optee->rpmb_dev); > > > + mutex_unlock(&optee->rpmb_dev_mutex); > > > + if (!rdev) { > > mutex_lock(&optee->rpmb_dev_mutex); > > rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); > > rpmb_dev_put(optee->rpmb_dev); > > optee->rpmb_dev = rdev; > > mutex_unlock(&optee->rpmb_dev_mutex); > > > > if (!rdev) { > > handle_rpc_supp_cmd(ctx, optee, arg); > > return; > > } > > > + } > > > > In optee_os core/pta/device.c:invoke_cmd(): > > > > case PTA_CMD_GET_DEVICES_RPMB: > > - res = tee_rpmb_init(); > > + res = tee_rpmb_reinit(); > > > > With tee_rpmb_reinit implemented like this: > > > > TEE_Result tee_rpmb_reinit(void) > > { > > TEE_Result res = rpmb_probe_reset(); > > if (res) { > > if (res != TEE_ERROR_NOT_SUPPORTED) > > return res; > > return legacy_rpmb_init(); > > } > > return tee_rpmb_init(); > > } > > OP-TEE in the secure world could save the CID and reinitialize by > searching for that specific device. > > Thanks, > Jens > > > > > > + if (arg->num_params != ARRAY_SIZE(params) || > > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > > + arg->params) || > > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || > > > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > + goto out; > > > + } > > > + > > > + p0 = tee_shm_get_va(params[0].u.memref.shm, > > > + params[0].u.memref.shm_offs); > > > + p1 = tee_shm_get_va(params[1].u.memref.shm, > > > + params[1].u.memref.shm_offs); > > > + arg->ret = rpmb_process_request(optee, rdev, p0, > > > + params[0].u.memref.size, > > > + p1, params[1].u.memref.size); > > > + if (arg->ret) > > > + goto out; > > > + > > > + if (optee->ops->to_msg_param(optee, arg->params, > > > + arg->num_params, params)) > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > +out: > > > + rpmb_dev_put(rdev); > > > +} > > > + > > > void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, > > > struct optee_msg_arg *arg) > > > { > > > @@ -271,6 +494,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, > > > case OPTEE_RPC_CMD_I2C_TRANSFER: > > > handle_rpc_func_cmd_i2c_transfer(ctx, arg); > > > break; > > > + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: > > > + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); > > > + break; > > > + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: > > > + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); > > > + break; > > > + case OPTEE_RPC_CMD_RPMB: > > > + handle_rpc_func_rpmb(ctx, optee, arg); > > > + break; > > > default: > > > handle_rpc_supp_cmd(ctx, optee, arg); > > > } > > > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c > > > index a37f87087e5c..c23bcf35c8cb 100644 > > > --- a/drivers/tee/optee/smc_abi.c > > > +++ b/drivers/tee/optee/smc_abi.c > > > @@ -20,6 +20,7 @@ > > > #include <linux/of_irq.h> > > > #include <linux/of_platform.h> > > > #include <linux/platform_device.h> > > > +#include <linux/rpmb.h> > > > #include <linux/sched.h> > > > #include <linux/slab.h> > > > #include <linux/string.h> > > > @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) > > > optee->smc.memremaped_shm = memremaped_shm; > > > optee->pool = pool; > > > optee_shm_arg_cache_init(optee, arg_cache_flags); > > > + mutex_init(&optee->rpmb_dev_mutex); > > > > > > platform_set_drvdata(pdev, optee); > > > ctx = teedev_open(optee->teedev); > > > @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) > > > if (rc) > > > goto err_disable_shm_cache; > > > > > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > > > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > > > + rpmb_interface_register(&optee->rpmb_intf); > > > pr_info("initialized driver\n"); > > > return 0; > > > > > > @@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) > > > err_close_ctx: > > > teedev_close_context(ctx); > > > err_supp_uninit: > > > + rpmb_dev_put(optee->rpmb_dev); > > > + mutex_destroy(&optee->rpmb_dev_mutex); > > > optee_shm_arg_cache_uninit(optee); > > > optee_supp_uninit(&optee->supp); > > > mutex_destroy(&optee->call_queue.mutex); > > > -- > > > 2.34.1 > > > >
On Fri, May 3, 2024 at 4:37 PM Manuel Traut <manut@mecka.net> wrote: > > On Fri, Apr 26, 2024 at 03:40:50PM +0200, Jens Wiklander wrote: > > On Thu, Apr 25, 2024 at 11:13 AM Manuel Traut <manut@mecka.net> wrote: > > > > > > On Mon, Apr 22, 2024 at 11:19:36AM +0200, Jens Wiklander wrote: > > > > Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and > > > > use an RPMB device via the RPMB subsystem instead of passing the RPMB > > > > frames via tee-supplicant in user space. A fallback mechanism is kept to > > > > route RPMB frames via tee-supplicant if the RPMB subsystem isn't > > > > available. > > > > > > > > The OP-TEE RPC ABI is extended to support iterating over all RPMB > > > > devices until one is found with the expected RPMB key already > > > > programmed. > > > > > > I tested this with fTPM running as built-in TA in optee_os. > > > The first user of the TA is u-boot. u-boot handles the RPMB requests. > > > > > > If the tpm-ftpm-tee kernel driver gets probed it triggers also some > > > RPMB requests. However they are not handled by the new RPMB subsystem. > > > > > > I did some workaround (see below) but I guess this no good solution. > > > Need to think longer about this.. > > > > That's interesting. Again, thanks for testing. > > > > > > > > > Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> > > > > --- > > > > drivers/tee/optee/core.c | 30 ++++ > > > > drivers/tee/optee/device.c | 7 + > > > > drivers/tee/optee/ffa_abi.c | 8 ++ > > > > drivers/tee/optee/optee_private.h | 21 ++- > > > > drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ > > > > drivers/tee/optee/rpc.c | 232 ++++++++++++++++++++++++++++++ > > > > drivers/tee/optee/smc_abi.c | 7 + > > > > 7 files changed, 339 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > > > index 3aed554bc8d8..082691c10a90 100644 > > > > --- a/drivers/tee/optee/core.c > > > > +++ b/drivers/tee/optee/core.c > > > > @@ -11,6 +11,7 @@ > > > > #include <linux/io.h> > > > > #include <linux/mm.h> > > > > #include <linux/module.h> > > > > +#include <linux/rpmb.h> > > > > #include <linux/slab.h> > > > > #include <linux/string.h> > > > > #include <linux/tee_drv.h> > > > > @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > > > > shm->pages = NULL; > > > > } > > > > > > > > +void optee_bus_scan_rpmb(struct work_struct *work) > > > > +{ > > > > + struct optee *optee = container_of(work, struct optee, > > > > + rpmb_scan_bus_work); > > > > + int ret; > > > > + > > > > + if (!optee->rpmb_scan_bus_done) { > > > > + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); > > > > + optee->rpmb_scan_bus_done = !ret; > > > > + if (ret && ret != -ENODEV) > > > > + pr_info("Scanning for RPMB device: ret %d\n", ret); > > > > + } > > > > +} > > > > + > > > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > > > > + void *data) > > > > +{ > > > > + struct optee *optee = container_of(intf, struct optee, rpmb_intf); > > > > + > > > > + if (action == RPMB_NOTIFY_ADD_DEVICE) > > > > + schedule_work(&optee->rpmb_scan_bus_work); > > > > + > > > > + return 0; > > > > +} > > > > + > > > > static void optee_bus_scan(struct work_struct *work) > > > > { > > > > WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); > > > > @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx) > > > > > > > > void optee_remove_common(struct optee *optee) > > > > { > > > > + rpmb_interface_unregister(&optee->rpmb_intf); > > > > + cancel_work_sync(&optee->rpmb_scan_bus_work); > > > > /* Unregister OP-TEE specific client devices on TEE bus */ > > > > optee_unregister_devices(); > > > > > > > > @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) > > > > tee_shm_pool_free(optee->pool); > > > > optee_supp_uninit(&optee->supp); > > > > mutex_destroy(&optee->call_queue.mutex); > > > > + rpmb_dev_put(optee->rpmb_dev); > > > > + mutex_destroy(&optee->rpmb_dev_mutex); > > > > } > > > > > > > > static int smc_abi_rc; > > > > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c > > > > index 4b1092127694..4274876857c8 100644 > > > > --- a/drivers/tee/optee/device.c > > > > +++ b/drivers/tee/optee/device.c > > > > @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, > > > > ret = tee_client_invoke_func(ctx, &inv_arg, param); > > > > if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && > > > > (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { > > > > + /* > > > > + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting > > > > + * the list of device TAs that depends on RPMB but a usable > > > > + * RPMB device isn't found. > > > > + */ > > > > + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) > > > > + return -ENODEV; > > > > pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", > > > > inv_arg.ret); > > > > return -EINVAL; > > > > diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c > > > > index ecb5eb079408..a8dfdb30b4e8 100644 > > > > --- a/drivers/tee/optee/ffa_abi.c > > > > +++ b/drivers/tee/optee/ffa_abi.c > > > > @@ -7,6 +7,7 @@ > > > > > > > > #include <linux/arm_ffa.h> > > > > #include <linux/errno.h> > > > > +#include <linux/rpmb.h> > > > > #include <linux/scatterlist.h> > > > > #include <linux/sched.h> > > > > #include <linux/slab.h> > > > > @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > > > optee_cq_init(&optee->call_queue, 0); > > > > optee_supp_init(&optee->supp); > > > > optee_shm_arg_cache_init(optee, arg_cache_flags); > > > > + mutex_init(&optee->rpmb_dev_mutex); > > > > ffa_dev_set_drvdata(ffa_dev, optee); > > > > ctx = teedev_open(optee->teedev); > > > > if (IS_ERR(ctx)) { > > > > @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > > > if (rc) > > > > goto err_unregister_devices; > > > > > > > > + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); > > > > + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; > > > > + rpmb_interface_register(&optee->rpmb_intf); > > > > pr_info("initialized driver\n"); > > > > return 0; > > > > > > > > @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) > > > > teedev_close_context(ctx); > > > > err_rhashtable_free: > > > > rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); > > > > + rpmb_dev_put(optee->rpmb_dev); > > > > + mutex_destroy(&optee->rpmb_dev_mutex); > > > > + rpmb_interface_unregister(&optee->rpmb_intf); > > > > optee_supp_uninit(&optee->supp); > > > > mutex_destroy(&optee->call_queue.mutex); > > > > mutex_destroy(&optee->ffa.mutex); > > > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h > > > > index 7a5243c78b55..ae72f3dda1d2 100644 > > > > --- a/drivers/tee/optee/optee_private.h > > > > +++ b/drivers/tee/optee/optee_private.h > > > > @@ -8,6 +8,7 @@ > > > > > > > > #include <linux/arm-smccc.h> > > > > #include <linux/rhashtable.h> > > > > +#include <linux/rpmb.h> > > > > #include <linux/semaphore.h> > > > > #include <linux/tee_drv.h> > > > > #include <linux/types.h> > > > > @@ -20,11 +21,13 @@ > > > > /* Some Global Platform error codes used in this driver */ > > > > #define TEEC_SUCCESS 0x00000000 > > > > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 > > > > +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 > > > > #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A > > > > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E > > > > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C > > > > #define TEEC_ERROR_BUSY 0xFFFF000D > > > > #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 > > > > +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003 > > > > > > > > #define TEEC_ORIGIN_COMMS 0x00000002 > > > > > > > > @@ -197,6 +200,12 @@ struct optee_ops { > > > > * @notif: notification synchronization struct > > > > * @supp: supplicant synchronization struct for RPC to supplicant > > > > * @pool: shared memory pool > > > > + * @mutex: mutex protecting @rpmb_dev > > > > + * @rpmb_dev: current RPMB device or NULL > > > > + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices > > > > + * was already done > > > > + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus > > > > + * and register RPMB dependent optee drivers > > > > * @rpc_param_count: If > 0 number of RPC parameters to make room for > > > > * @scan_bus_done flag if device registation was already done. > > > > * @scan_bus_work workq to scan optee bus and register optee drivers > > > > @@ -215,9 +224,15 @@ struct optee { > > > > struct optee_notif notif; > > > > struct optee_supp supp; > > > > struct tee_shm_pool *pool; > > > > + /* Protects rpmb_dev pointer */ > > > > + struct mutex rpmb_dev_mutex; > > > > + struct rpmb_dev *rpmb_dev; > > > > + struct notifier_block rpmb_intf; > > > > unsigned int rpc_param_count; > > > > - bool scan_bus_done; > > > > + bool scan_bus_done; > > > > + bool rpmb_scan_bus_done; > > > > struct work_struct scan_bus_work; > > > > + struct work_struct rpmb_scan_bus_work; > > > > }; > > > > > > > > struct optee_session { > > > > @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); > > > > > > > > #define PTA_CMD_GET_DEVICES 0x0 > > > > #define PTA_CMD_GET_DEVICES_SUPP 0x1 > > > > +#define PTA_CMD_GET_DEVICES_RPMB 0x2 > > > > int optee_enumerate_devices(u32 func); > > > > void optee_unregister_devices(void); > > > > +void optee_bus_scan_rpmb(struct work_struct *work); > > > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, > > > > + void *data); > > > > > > > > int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, > > > > size_t size, size_t align, > > > > diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h > > > > index f3f06e0994a7..f351a8ac69fc 100644 > > > > --- a/drivers/tee/optee/optee_rpc_cmd.h > > > > +++ b/drivers/tee/optee/optee_rpc_cmd.h > > > > @@ -16,6 +16,14 @@ > > > > * and sends responses. > > > > */ > > > > > > > > +/* > > > > + * Replay Protected Memory Block access > > > > + * > > > > + * [in] memref[0] Frames to device > > > > + * [out] memref[1] Frames from device > > > > + */ > > > > +#define OPTEE_RPC_CMD_RPMB 1 > > > > + > > > > /* > > > > * Get time > > > > * > > > > @@ -103,4 +111,31 @@ > > > > /* I2C master control flags */ > > > > #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0) > > > > > > > > +/* > > > > + * Reset RPMB probing > > > > + * > > > > + * Releases an eventually already used RPMB devices and starts over searching > > > > + * for RPMB devices. Returns the kind of shared memory to use in subsequent > > > > + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. > > > > + * > > > > + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for > > > > + * OPTEE_RPC_CMD_SHM_ALLOC > > > > + */ > > > > +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 > > > > + > > > > +/* > > > > + * Probe next RPMB device > > > > + * > > > > + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* > > > > + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" > > > > + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" > > > > + * [out] memref[1] Buffer with the raw CID > > > > + */ > > > > +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 > > > > + > > > > +/* Type of RPMB device */ > > > > +#define OPTEE_RPC_RPMB_EMMC 0 > > > > +#define OPTEE_RPC_RPMB_UFS 1 > > > > +#define OPTEE_RPC_RPMB_NVME 2 > > > > + > > > > #endif /*__OPTEE_RPC_CMD_H*/ > > > > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c > > > > index e69bc6380683..a3e4c1830f39 100644 > > > > --- a/drivers/tee/optee/rpc.c > > > > +++ b/drivers/tee/optee/rpc.c > > > > @@ -7,6 +7,7 @@ > > > > > > > > #include <linux/delay.h> > > > > #include <linux/i2c.h> > > > > +#include <linux/rpmb.h> > > > > #include <linux/slab.h> > > > > #include <linux/tee_drv.h> > > > > #include "optee_private.h" > > > > @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) > > > > optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); > > > > } > > > > > > > > +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, > > > > + struct optee *optee, > > > > + struct optee_msg_arg *arg) > > > > +{ > > > > + struct tee_param params[1]; > > > > + > > > > + if (!IS_ENABLED(CONFIG_RPMB)) { > > > > + handle_rpc_supp_cmd(ctx, optee, arg); > > > > + return; > > > > + } > > > > + > > > > + if (arg->num_params != ARRAY_SIZE(params) || > > > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > > > + arg->params) || > > > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { > > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > > + return; > > > > + } > > > > + > > > > + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; > > > > + params[0].u.value.b = 0; > > > > + params[0].u.value.c = 0; > > > > + if (optee->ops->to_msg_param(optee, arg->params, > > > > + arg->num_params, params)) { > > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > > + return; > > > > + } > > > > + > > > > + mutex_lock(&optee->rpmb_dev_mutex); > > > > + rpmb_dev_put(optee->rpmb_dev); > > > > + optee->rpmb_dev = NULL; > > > > + mutex_unlock(&optee->rpmb_dev_mutex); > > > > + > > > > + arg->ret = TEEC_SUCCESS; > > > > +} > > > > + > > > > +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) > > > > +{ > > > > + switch (rtype) { > > > > + case RPMB_TYPE_EMMC: > > > > + return OPTEE_RPC_RPMB_EMMC; > > > > + case RPMB_TYPE_UFS: > > > > + return OPTEE_RPC_RPMB_UFS; > > > > + case RPMB_TYPE_NVME: > > > > + return OPTEE_RPC_RPMB_NVME; > > > > + default: > > > > + return -1; > > > > + } > > > > +} > > > > + > > > > +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) > > > > +{ > > > > + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; > > > > +} > > > > + > > > > +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, > > > > + struct optee *optee, > > > > + struct optee_msg_arg *arg) > > > > +{ > > > > + struct rpmb_dev *rdev; > > > > + struct tee_param params[2]; > > > > + void *buf; > > > > + > > > > + if (!IS_REACHABLE(CONFIG_RPMB)) { > > > > + handle_rpc_supp_cmd(ctx, optee, arg); > > > > + return; > > > > + } > > > > + > > > > + if (arg->num_params != ARRAY_SIZE(params) || > > > > + optee->ops->from_msg_param(optee, params, arg->num_params, > > > > + arg->params) || > > > > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || > > > > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { > > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > > + return; > > > > + } > > > > + buf = tee_shm_get_va(params[1].u.memref.shm, > > > > + params[1].u.memref.shm_offs); > > > > + if (!buf) { > > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > > + return; > > > > + } > > > > + > > > > + mutex_lock(&optee->rpmb_dev_mutex); > > > > + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); > > > > + rpmb_dev_put(optee->rpmb_dev); > > > > + optee->rpmb_dev = rdev; > > > > + mutex_unlock(&optee->rpmb_dev_mutex); > > > > + > > > > + if (!rdev) { > > > > + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; > > > > + return; > > > > + } > > > > + > > > > + if (params[1].u.memref.size < rdev->descr.dev_id_len) { > > > > + arg->ret = TEEC_ERROR_SHORT_BUFFER; > > > > + return; > > > > + } > > > > + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); > > > > + params[1].u.memref.size = rdev->descr.dev_id_len; > > > > + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); > > > > + params[0].u.value.b = rdev->descr.capacity; > > > > + params[0].u.value.c = rdev->descr.reliable_wr_count; > > > > + if (optee->ops->to_msg_param(optee, arg->params, > > > > + arg->num_params, params)) { > > > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS; > > > > + return; > > > > + } > > > > + > > > > + arg->ret = TEEC_SUCCESS; > > > > +} > > > > + > > > > +/* Request */ > > > > +struct rpmb_req { > > > > + u16 cmd; > > > > +#define RPMB_CMD_DATA_REQ 0x00 > > > > +#define RPMB_CMD_GET_DEV_INFO 0x01 > > > > + u16 dev_id; > > > > + u16 block_count; > > > > + /* Optional data frames (rpmb_data_frame) follow */ > > > > +}; > > > > + > > > > +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) > > This is the root cause for the non page aligned buffer we discussed in > > v5 2/3 mmc: block: register RPMB partition with the RPMB subsystem Thanks for tracking this down. I'll fix it in the v6. Cheers, Jens
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 3aed554bc8d8..082691c10a90 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/module.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/tee_drv.h> @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm, shm->pages = NULL; } +void optee_bus_scan_rpmb(struct work_struct *work) +{ + struct optee *optee = container_of(work, struct optee, + rpmb_scan_bus_work); + int ret; + + if (!optee->rpmb_scan_bus_done) { + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB); + optee->rpmb_scan_bus_done = !ret; + if (ret && ret != -ENODEV) + pr_info("Scanning for RPMB device: ret %d\n", ret); + } +} + +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, + void *data) +{ + struct optee *optee = container_of(intf, struct optee, rpmb_intf); + + if (action == RPMB_NOTIFY_ADD_DEVICE) + schedule_work(&optee->rpmb_scan_bus_work); + + return 0; +} + static void optee_bus_scan(struct work_struct *work) { WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP)); @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx) void optee_remove_common(struct optee *optee) { + rpmb_interface_unregister(&optee->rpmb_intf); + cancel_work_sync(&optee->rpmb_scan_bus_work); /* Unregister OP-TEE specific client devices on TEE bus */ optee_unregister_devices(); @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee) tee_shm_pool_free(optee->pool); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); } static int smc_abi_rc; diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index 4b1092127694..4274876857c8 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session, ret = tee_client_invoke_func(ctx, &inv_arg, param); if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) && (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) { + /* + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting + * the list of device TAs that depends on RPMB but a usable + * RPMB device isn't found. + */ + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE) + return -ENODEV; pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", inv_arg.ret); return -EINVAL; diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c index ecb5eb079408..a8dfdb30b4e8 100644 --- a/drivers/tee/optee/ffa_abi.c +++ b/drivers/tee/optee/ffa_abi.c @@ -7,6 +7,7 @@ #include <linux/arm_ffa.h> #include <linux/errno.h> +#include <linux/rpmb.h> #include <linux/scatterlist.h> #include <linux/sched.h> #include <linux/slab.h> @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) optee_cq_init(&optee->call_queue, 0); optee_supp_init(&optee->supp); optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex); ffa_dev_set_drvdata(ffa_dev, optee); ctx = teedev_open(optee->teedev); if (IS_ERR(ctx)) { @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) if (rc) goto err_unregister_devices; + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; + rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0; @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev) teedev_close_context(ctx); err_rhashtable_free: rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL); + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); + rpmb_interface_unregister(&optee->rpmb_intf); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex); mutex_destroy(&optee->ffa.mutex); diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 7a5243c78b55..ae72f3dda1d2 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -8,6 +8,7 @@ #include <linux/arm-smccc.h> #include <linux/rhashtable.h> +#include <linux/rpmb.h> #include <linux/semaphore.h> #include <linux/tee_drv.h> #include <linux/types.h> @@ -20,11 +21,13 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008 #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C #define TEEC_ERROR_BUSY 0xFFFF000D #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003 #define TEEC_ORIGIN_COMMS 0x00000002 @@ -197,6 +200,12 @@ struct optee_ops { * @notif: notification synchronization struct * @supp: supplicant synchronization struct for RPC to supplicant * @pool: shared memory pool + * @mutex: mutex protecting @rpmb_dev + * @rpmb_dev: current RPMB device or NULL + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices + * was already done + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus + * and register RPMB dependent optee drivers * @rpc_param_count: If > 0 number of RPC parameters to make room for * @scan_bus_done flag if device registation was already done. * @scan_bus_work workq to scan optee bus and register optee drivers @@ -215,9 +224,15 @@ struct optee { struct optee_notif notif; struct optee_supp supp; struct tee_shm_pool *pool; + /* Protects rpmb_dev pointer */ + struct mutex rpmb_dev_mutex; + struct rpmb_dev *rpmb_dev; + struct notifier_block rpmb_intf; unsigned int rpc_param_count; - bool scan_bus_done; + bool scan_bus_done; + bool rpmb_scan_bus_done; struct work_struct scan_bus_work; + struct work_struct rpmb_scan_bus_work; }; struct optee_session { @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session); #define PTA_CMD_GET_DEVICES 0x0 #define PTA_CMD_GET_DEVICES_SUPP 0x1 +#define PTA_CMD_GET_DEVICES_RPMB 0x2 int optee_enumerate_devices(u32 func); void optee_unregister_devices(void); +void optee_bus_scan_rpmb(struct work_struct *work); +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action, + void *data); int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm, size_t size, size_t align, diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h index f3f06e0994a7..f351a8ac69fc 100644 --- a/drivers/tee/optee/optee_rpc_cmd.h +++ b/drivers/tee/optee/optee_rpc_cmd.h @@ -16,6 +16,14 @@ * and sends responses. */ +/* + * Replay Protected Memory Block access + * + * [in] memref[0] Frames to device + * [out] memref[1] Frames from device + */ +#define OPTEE_RPC_CMD_RPMB 1 + /* * Get time * @@ -103,4 +111,31 @@ /* I2C master control flags */ #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0) +/* + * Reset RPMB probing + * + * Releases an eventually already used RPMB devices and starts over searching + * for RPMB devices. Returns the kind of shared memory to use in subsequent + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls. + * + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for + * OPTEE_RPC_CMD_SHM_ALLOC + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22 + +/* + * Probe next RPMB device + * + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_* + * [out] value[0].b EXT CSD-slice 168 "RPMB Size" + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count" + * [out] memref[1] Buffer with the raw CID + */ +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23 + +/* Type of RPMB device */ +#define OPTEE_RPC_RPMB_EMMC 0 +#define OPTEE_RPC_RPMB_UFS 1 +#define OPTEE_RPC_RPMB_NVME 2 + #endif /*__OPTEE_RPC_CMD_H*/ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index e69bc6380683..a3e4c1830f39 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@ #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/rpmb.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm) optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m); } +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[1]; + + if (!IS_ENABLED(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL; + params[0].u.value.b = 0; + params[0].u.value.c = 0; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = NULL; + mutex_unlock(&optee->rpmb_dev_mutex); + + arg->ret = TEEC_SUCCESS; +} + +static int rpmb_type_to_rpc_type(enum rpmb_type rtype) +{ + switch (rtype) { + case RPMB_TYPE_EMMC: + return OPTEE_RPC_RPMB_EMMC; + case RPMB_TYPE_UFS: + return OPTEE_RPC_RPMB_UFS; + case RPMB_TYPE_NVME: + return OPTEE_RPC_RPMB_NVME; + default: + return -1; + } +} + +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data) +{ + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0; +} + +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx, + struct optee *optee, + struct optee_msg_arg *arg) +{ + struct rpmb_dev *rdev; + struct tee_param params[2]; + void *buf; + + if (!IS_REACHABLE(CONFIG_RPMB)) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + buf = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + if (!buf) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match); + rpmb_dev_put(optee->rpmb_dev); + optee->rpmb_dev = rdev; + mutex_unlock(&optee->rpmb_dev_mutex); + + if (!rdev) { + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND; + return; + } + + if (params[1].u.memref.size < rdev->descr.dev_id_len) { + arg->ret = TEEC_ERROR_SHORT_BUFFER; + return; + } + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len); + params[1].u.memref.size = rdev->descr.dev_id_len; + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type); + params[0].u.value.b = rdev->descr.capacity; + params[0].u.value.c = rdev->descr.reliable_wr_count; + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + arg->ret = TEEC_SUCCESS; +} + +/* Request */ +struct rpmb_req { + u16 cmd; +#define RPMB_CMD_DATA_REQ 0x00 +#define RPMB_CMD_GET_DEV_INFO 0x01 + u16 dev_id; + u16 block_count; + /* Optional data frames (rpmb_data_frame) follow */ +}; + +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1)) + +#define RPMB_CID_SZ 16 + +/* Response to device info request */ +struct rpmb_dev_info { + u8 cid[RPMB_CID_SZ]; + u8 rpmb_size_mult; /* RPMB size in units of 128kB */ + u8 reliable_wr_count; /* RPMB write size in units of 256 bytes */ + u8 ret_code; +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00 +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01 +}; + +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size) +{ + struct rpmb_dev_info *dev_info; + + if (rsp_size != sizeof(*dev_info)) + return TEEC_ERROR_BAD_PARAMETERS; + + dev_info = rsp; + memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid)); + dev_info->rpmb_size_mult = rdev->descr.capacity; + dev_info->reliable_wr_count = rdev->descr.reliable_wr_count; + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK; + + return TEEC_SUCCESS; +} + +/* + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame + */ +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev, + void *req, size_t req_size, + void *rsp, size_t rsp_size) +{ + struct rpmb_req *sreq = req; + int rc; + + if (req_size < sizeof(*sreq)) + return TEEC_ERROR_BAD_PARAMETERS; + + switch (sreq->cmd) { + case RPMB_CMD_DATA_REQ: + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req), + req_size - sizeof(struct rpmb_req), + rsp, rsp_size); + if (rc) + return TEEC_ERROR_BAD_PARAMETERS; + return TEEC_SUCCESS; + case RPMB_CMD_GET_DEV_INFO: + return get_dev_info(rdev, rsp, rsp_size); + default: + return TEEC_ERROR_BAD_PARAMETERS; + } +} + +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee, + struct optee_msg_arg *arg) +{ + struct tee_param params[2]; + struct rpmb_dev *rdev; + void *p0, *p1; + + mutex_lock(&optee->rpmb_dev_mutex); + rdev = rpmb_dev_get(optee->rpmb_dev); + mutex_unlock(&optee->rpmb_dev_mutex); + if (!rdev) { + handle_rpc_supp_cmd(ctx, optee, arg); + return; + } + + if (arg->num_params != ARRAY_SIZE(params) || + optee->ops->from_msg_param(optee, params, arg->num_params, + arg->params) || + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT || + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + goto out; + } + + p0 = tee_shm_get_va(params[0].u.memref.shm, + params[0].u.memref.shm_offs); + p1 = tee_shm_get_va(params[1].u.memref.shm, + params[1].u.memref.shm_offs); + arg->ret = rpmb_process_request(optee, rdev, p0, + params[0].u.memref.size, + p1, params[1].u.memref.size); + if (arg->ret) + goto out; + + if (optee->ops->to_msg_param(optee, arg->params, + arg->num_params, params)) + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +out: + rpmb_dev_put(rdev); +} + void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, struct optee_msg_arg *arg) { @@ -271,6 +494,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_RPC_CMD_I2C_TRANSFER: handle_rpc_func_cmd_i2c_transfer(ctx, arg); break; + case OPTEE_RPC_CMD_RPMB_PROBE_RESET: + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT: + handle_rpc_func_rpmb_probe_next(ctx, optee, arg); + break; + case OPTEE_RPC_CMD_RPMB: + handle_rpc_func_rpmb(ctx, optee, arg); + break; default: handle_rpc_supp_cmd(ctx, optee, arg); } diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c index a37f87087e5c..c23bcf35c8cb 100644 --- a/drivers/tee/optee/smc_abi.c +++ b/drivers/tee/optee/smc_abi.c @@ -20,6 +20,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/rpmb.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev) optee->smc.memremaped_shm = memremaped_shm; optee->pool = pool; optee_shm_arg_cache_init(optee, arg_cache_flags); + mutex_init(&optee->rpmb_dev_mutex); platform_set_drvdata(pdev, optee); ctx = teedev_open(optee->teedev); @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev) if (rc) goto err_disable_shm_cache; + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb); + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev; + rpmb_interface_register(&optee->rpmb_intf); pr_info("initialized driver\n"); return 0; @@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev) err_close_ctx: teedev_close_context(ctx); err_supp_uninit: + rpmb_dev_put(optee->rpmb_dev); + mutex_destroy(&optee->rpmb_dev_mutex); optee_shm_arg_cache_uninit(optee); optee_supp_uninit(&optee->supp); mutex_destroy(&optee->call_queue.mutex);
Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and use an RPMB device via the RPMB subsystem instead of passing the RPMB frames via tee-supplicant in user space. A fallback mechanism is kept to route RPMB frames via tee-supplicant if the RPMB subsystem isn't available. The OP-TEE RPC ABI is extended to support iterating over all RPMB devices until one is found with the expected RPMB key already programmed. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> --- drivers/tee/optee/core.c | 30 ++++ drivers/tee/optee/device.c | 7 + drivers/tee/optee/ffa_abi.c | 8 ++ drivers/tee/optee/optee_private.h | 21 ++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++ drivers/tee/optee/rpc.c | 232 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 + 7 files changed, 339 insertions(+), 1 deletion(-)