| Message ID | 20240430103956.60190-19-jacopo.mondi@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [01/19] media: adv748x: Add support for active state | expand |
Hi Jacopo, Thank you for the patch. On Tue, Apr 30, 2024 at 12:39:54PM +0200, Jacopo Mondi wrote: > Add the set_routing() subdev operation to allow userspace to activate > routes on the R-Car CSI-2 receiver. > > Routing for this device is fixed. Validate that the provided route > respects it. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > --- > drivers/media/platform/renesas/rcar-csi2.c | 48 +++++++++++++++++++++- > 1 file changed, 47 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c > index ed818a6fa655..47cb12f077e5 100644 > --- a/drivers/media/platform/renesas/rcar-csi2.c > +++ b/drivers/media/platform/renesas/rcar-csi2.c > @@ -1287,6 +1287,51 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd, > return 0; > } > > +static int rcsi2_apply_routing(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, > + struct v4l2_subdev_krouting *routing) > +{ > + int ret; > + > + ret = v4l2_subdev_routing_validate(sd, routing, > + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); > + if (ret) > + return ret; > + > + /* > + * Routing is fixed for this device. > + * > + * Only routes in the form of CSI2:0/x->CSI2:x+1/0 are allowed. > + * > + * We have anyway to implement set_routing to mark the route as active. Then it's not fixed :-) > + */ > + for (unsigned int i = 0; i < routing->num_routes; ++i) { > + const struct v4l2_subdev_route *route = &routing->routes[i]; > + unsigned int pad = route->sink_stream + 1; > + > + if (route->sink_pad != 0) > + return -EINVAL; I don't think this can happen, the core should check the validity of pads for you. > + > + if (route->source_pad != pad || route->source_stream != 0) > + return -EINVAL; You should adjust invalid routes, not return an error. > + } > + > + return v4l2_subdev_set_routing(sd, state, routing); > +} > + > +static int rcsi2_set_routing(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, > + enum v4l2_subdev_format_whence which, > + struct v4l2_subdev_krouting *routing) > +{ > + struct rcar_csi2 *priv = sd_to_csi2(sd); > + > + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->stream_count) > + return -EBUSY; > + > + return rcsi2_apply_routing(sd, state, routing); > +} > + > static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = { > .s_stream = rcsi2_s_stream, > }; > @@ -1294,6 +1339,7 @@ static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = { > static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = { > .set_fmt = rcsi2_set_pad_format, > .get_fmt = v4l2_subdev_get_fmt, > + .set_routing = rcsi2_set_routing, > }; > > static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = { > @@ -1353,7 +1399,7 @@ static int rcsi2_init_state(struct v4l2_subdev *sd, > .routes = routes, > }; > > - return v4l2_subdev_set_routing(sd, state, &routing); > + return rcsi2_apply_routing(sd, state, &routing); > } > > static const struct v4l2_subdev_internal_ops rcar_csi2_internal_ops = {
diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c index ed818a6fa655..47cb12f077e5 100644 --- a/drivers/media/platform/renesas/rcar-csi2.c +++ b/drivers/media/platform/renesas/rcar-csi2.c @@ -1287,6 +1287,51 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd, return 0; } +static int rcsi2_apply_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + int ret; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + /* + * Routing is fixed for this device. + * + * Only routes in the form of CSI2:0/x->CSI2:x+1/0 are allowed. + * + * We have anyway to implement set_routing to mark the route as active. + */ + for (unsigned int i = 0; i < routing->num_routes; ++i) { + const struct v4l2_subdev_route *route = &routing->routes[i]; + unsigned int pad = route->sink_stream + 1; + + if (route->sink_pad != 0) + return -EINVAL; + + if (route->source_pad != pad || route->source_stream != 0) + return -EINVAL; + } + + return v4l2_subdev_set_routing(sd, state, routing); +} + +static int rcsi2_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct rcar_csi2 *priv = sd_to_csi2(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->stream_count) + return -EBUSY; + + return rcsi2_apply_routing(sd, state, routing); +} + static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = { .s_stream = rcsi2_s_stream, }; @@ -1294,6 +1339,7 @@ static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = { static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = { .set_fmt = rcsi2_set_pad_format, .get_fmt = v4l2_subdev_get_fmt, + .set_routing = rcsi2_set_routing, }; static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = { @@ -1353,7 +1399,7 @@ static int rcsi2_init_state(struct v4l2_subdev *sd, .routes = routes, }; - return v4l2_subdev_set_routing(sd, state, &routing); + return rcsi2_apply_routing(sd, state, &routing); } static const struct v4l2_subdev_internal_ops rcar_csi2_internal_ops = {
Add the set_routing() subdev operation to allow userspace to activate routes on the R-Car CSI-2 receiver. Routing for this device is fixed. Validate that the provided route respects it. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- drivers/media/platform/renesas/rcar-csi2.c | 48 +++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)