@@ -1,4 +1,5 @@
-/* Copyright 2012-15 Advanced Micro Devices, Inc.
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
@@ -306,33 +307,48 @@ struct mpcc_state {
* struct mpc_funcs - funcs
*/
struct mpc_funcs {
+ /**
+ * @read_mpcc_state:
+ *
+ * Read register content from given MPCC physical instance.
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context
+ * - [in] mpcc_instance - MPC context instance
+ * - [in] mpcc_state - MPC context state
+ *
+ * Return:
+ *
+ * void
+ */
void (*read_mpcc_state)(
struct mpc *mpc,
int mpcc_inst,
struct mpcc_state *s);
/**
- * @insert_plane:
- *
- * Insert DPP into MPC tree based on specified blending position.
- * Only used for planes that are part of blending chain for OPP output
- *
- * Parameters:
- *
- * - [in/out] mpc - MPC context.
- * - [in/out] tree - MPC tree structure that plane will be added to.
- * - [in] blnd_cfg - MPCC blending configuration for the new blending layer.
- * - [in] sm_cfg - MPCC stereo mix configuration for the new blending layer.
- * stereo mix must disable for the very bottom layer of the tree config.
- * - [in] insert_above_mpcc - Insert new plane above this MPCC.
- * If NULL, insert as bottom plane.
- * - [in] dpp_id - DPP instance for the plane to be added.
- * - [in] mpcc_id - The MPCC physical instance to use for blending.
- *
- * Return:
- *
- * struct mpcc* - MPCC that was added.
- */
+ * @insert_plane:
+ *
+ * Insert DPP into MPC tree based on specified blending position.
+ * Only used for planes that are part of blending chain for OPP output
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context.
+ * - [in/out] tree - MPC tree structure that plane will be added to.
+ * - [in] blnd_cfg - MPCC blending configuration for the new blending layer.
+ * - [in] sm_cfg - MPCC stereo mix configuration for the new blending layer.
+ * stereo mix must disable for the very bottom layer of the tree config.
+ * - [in] insert_above_mpcc - Insert new plane above this MPCC.
+ * If NULL, insert as bottom plane.
+ * - [in] dpp_id - DPP instance for the plane to be added.
+ * - [in] mpcc_id - The MPCC physical instance to use for blending.
+ *
+ * Return:
+ *
+ * struct mpcc* - MPCC that was added.
+ */
struct mpcc* (*insert_plane)(
struct mpc *mpc,
struct mpc_tree *tree,
@@ -343,107 +359,117 @@ struct mpc_funcs {
int mpcc_id);
/**
- * @remove_mpcc:
- *
- * Remove a specified MPCC from the MPC tree.
- *
- * Parameters:
- *
- * - [in/out] mpc - MPC context.
- * - [in/out] tree - MPC tree structure that plane will be removed from.
- * - [in/out] mpcc - MPCC to be removed from tree.
- *
- * Return:
- *
- * void
- */
+ * @remove_mpcc:
+ *
+ * Remove a specified MPCC from the MPC tree.
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context.
+ * - [in/out] tree - MPC tree structure that plane will be removed from.
+ * - [in/out] mpcc - MPCC to be removed from tree.
+ *
+ * Return:
+ *
+ * void
+ */
void (*remove_mpcc)(
struct mpc *mpc,
struct mpc_tree *tree,
struct mpcc *mpcc);
/**
- * @mpc_init:
- *
- * Reset the MPCC HW status by disconnecting all muxes.
- *
- * Parameters:
- *
- * - [in/out] mpc - MPC context.
- *
- * Return:
- *
- * void
- */
+ * @mpc_init:
+ *
+ * Reset the MPCC HW status by disconnecting all muxes.
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context.
+ *
+ * Return:
+ *
+ * void
+ */
void (*mpc_init)(struct mpc *mpc);
+
+ /**
+ * @mpc_init_single_inst:
+ *
+ * Initialize given MPCC physical instance.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] mpcc_id - The MPCC physical instance to be initialized.
+ */
void (*mpc_init_single_inst)(
struct mpc *mpc,
unsigned int mpcc_id);
/**
- * @update_blending:
- *
- * Update the blending configuration for a specified MPCC.
- *
- * Parameters:
- *
- * - [in/out] mpc - MPC context.
- * - [in] blnd_cfg - MPCC blending configuration.
- * - [in] mpcc_id - The MPCC physical instance.
- *
- * Return:
- *
- * void
- */
+ * @update_blending:
+ *
+ * Update the blending configuration for a specified MPCC.
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context.
+ * - [in] blnd_cfg - MPCC blending configuration.
+ * - [in] mpcc_id - The MPCC physical instance.
+ *
+ * Return:
+ *
+ * void
+ */
void (*update_blending)(
struct mpc *mpc,
struct mpcc_blnd_cfg *blnd_cfg,
int mpcc_id);
/**
- * @cursor_lock:
- *
- * Lock cursor updates for the specified OPP. OPP defines the set of
- * MPCC that are locked together for cursor.
- *
- * Parameters:
- *
- * - [in] mpc - MPC context.
- * - [in] opp_id - The OPP to lock cursor updates on
- * - [in] lock - lock/unlock the OPP
- *
- * Return:
- *
- * void
- */
+ * @cursor_lock:
+ *
+ * Lock cursor updates for the specified OPP. OPP defines the set of
+ * MPCC that are locked together for cursor.
+ *
+ * Parameters:
+ *
+ * - [in] mpc - MPC context.
+ * - [in] opp_id - The OPP to lock cursor updates on
+ * - [in] lock - lock/unlock the OPP
+ *
+ * Return:
+ *
+ * void
+ */
void (*cursor_lock)(
struct mpc *mpc,
int opp_id,
bool lock);
/**
- * @insert_plane_to_secondary:
- *
- * Add DPP into secondary MPC tree based on specified blending
- * position. Only used for planes that are part of blending chain for
- * DWB output
- *
- * Parameters:
- *
- * - [in/out] mpc - MPC context.
- * - [in/out] tree - MPC tree structure that plane will be added to.
- * - [in] blnd_cfg - MPCC blending configuration for the new blending layer.
- * - [in] sm_cfg - MPCC stereo mix configuration for the new blending layer.
- * stereo mix must disable for the very bottom layer of the tree config.
- * - [in] insert_above_mpcc - Insert new plane above this MPCC. If
- * NULL, insert as bottom plane.
- * - [in] dpp_id - DPP instance for the plane to be added.
- * - [in] mpcc_id - The MPCC physical instance to use for blending.
- *
- * Return:
- *
- * struct mpcc* - MPCC that was added.
- */
+ * @insert_plane_to_secondary:
+ *
+ * Add DPP into secondary MPC tree based on specified blending
+ * position. Only used for planes that are part of blending chain for
+ * DWB output
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context.
+ * - [in/out] tree - MPC tree structure that plane will be added to.
+ * - [in] blnd_cfg - MPCC blending configuration for the new blending layer.
+ * - [in] sm_cfg - MPCC stereo mix configuration for the new blending layer.
+ * stereo mix must disable for the very bottom layer of the tree config.
+ * - [in] insert_above_mpcc - Insert new plane above this MPCC. If
+ * NULL, insert as bottom plane.
+ * - [in] dpp_id - DPP instance for the plane to be added.
+ * - [in] mpcc_id - The MPCC physical instance to use for blending.
+ *
+ * Return:
+ *
+ * struct mpcc* - MPCC that was added.
+ */
struct mpcc* (*insert_plane_to_secondary)(
struct mpc *mpc,
struct mpc_tree *tree,
@@ -454,81 +480,301 @@ struct mpc_funcs {
int mpcc_id);
/**
- * @remove_mpcc_from_secondary:
- *
- * Remove a specified DPP from the 'secondary' MPC tree.
- *
- * Parameters:
- *
- * - [in/out] mpc - MPC context.
- * - [in/out] tree - MPC tree structure that plane will be removed from.
- * - [in] mpcc - MPCC to be removed from tree.
- *
- * Return:
- *
- * void
- */
+ * @remove_mpcc_from_secondary:
+ *
+ * Remove a specified DPP from the 'secondary' MPC tree.
+ *
+ * Parameters:
+ *
+ * - [in/out] mpc - MPC context.
+ * - [in/out] tree - MPC tree structure that plane will be removed from.
+ * - [in] mpcc - MPCC to be removed from tree.
+ *
+ * Return:
+ *
+ * void
+ */
void (*remove_mpcc_from_secondary)(
struct mpc *mpc,
struct mpc_tree *tree,
struct mpcc *mpcc);
+ /**
+ * @get_mpcc_for_dpp_from_secondary:
+ *
+ * Find, if it exists, a MPCC from a given 'secondary' MPC tree that
+ * is associated with specified plane.
+ *
+ * Parameters:
+ * - [in/out] tree - MPC tree structure to search for plane.
+ * - [in] dpp_id - DPP to be searched.
+ *
+ * Return:
+ *
+ * struct mpcc* - pointer to plane or NULL if no plane found.
+ */
struct mpcc* (*get_mpcc_for_dpp_from_secondary)(
struct mpc_tree *tree,
int dpp_id);
+ /**
+ * @get_mpcc_for_dpp:
+ *
+ * Find, if it exists, a MPCC from a given MPC tree that
+ * is associated with specified plane.
+ *
+ * Parameters:
+ * - [in/out] tree - MPC tree structure to search for plane.
+ * - [in] dpp_id - DPP to be searched.
+ *
+ * Return:
+ *
+ * struct mpcc* - pointer to plane or NULL if no plane found.
+ */
struct mpcc* (*get_mpcc_for_dpp)(
struct mpc_tree *tree,
int dpp_id);
+ /**
+ * @wait_for_idle:
+ *
+ * Wait for a MPCC in MPC context to enter idle state.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC Context.
+ * - [in] id - MPCC to wait for idle state.
+ *
+ * Return:
+ *
+ * void
+ */
void (*wait_for_idle)(struct mpc *mpc, int id);
+ /**
+ * @assert_mpcc_idle_before_connect:
+ *
+ * Assert if MPCC in MPC context is in idle state.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] id - MPCC to assert idle state.
+ *
+ * Return:
+ *
+ * void
+ */
void (*assert_mpcc_idle_before_connect)(struct mpc *mpc, int mpcc_id);
+ /**
+ * @init_mpcc_list_from_hw:
+ *
+ * Iterate through the MPCC array from a given MPC context struct
+ * and configure each MPCC according to its registers' values.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context to initialize MPCC array.
+ * - [in/out] tree - MPC tree structure containing MPCC contexts to initialize.
+ *
+ * Return:
+ *
+ * void
+ */
void (*init_mpcc_list_from_hw)(
struct mpc *mpc,
struct mpc_tree *tree);
+ /**
+ * @set_denorm:
+ *
+ * Set corresponding OPP DENORM_CONTROL register value to specific denorm_mode
+ * based on given color depth.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] opp_id - Corresponding OPP to update register.
+ * - [in] output_depth - Arbitrary color depth to set denorm_mode.
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_denorm)(struct mpc *mpc,
int opp_id,
enum dc_color_depth output_depth);
+ /**
+ * @set_denorm_clamp:
+ *
+ * Set denorm clamp values on corresponding OPP DENORM CONTROL register.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] opp_id - Corresponding OPP to update register.
+ * - [in] denorm_clamp - Arbitrary denorm clamp to be set.
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_denorm_clamp)(
struct mpc *mpc,
int opp_id,
struct mpc_denorm_clamp denorm_clamp);
+ /**
+ * @set_output_csc:
+ *
+ * Set the Output Color Space Conversion matrix
+ * with given values and mode.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] opp_id - Corresponding OPP to update register.
+ * - [in] regval - Values to set in CSC matrix.
+ * - [in] ocsc_mode - Mode to set CSC.
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_output_csc)(struct mpc *mpc,
int opp_id,
const uint16_t *regval,
enum mpc_output_csc_mode ocsc_mode);
+ /**
+ * @set_ocsc_default:
+ *
+ * Set the Output Color Space Conversion matrix
+ * to default values according to color space.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] opp_id - Corresponding OPP to update register.
+ * - [in] color_space - OCSC color space.
+ * - [in] ocsc_mode - Mode to set CSC.
+ *
+ * Return:
+ *
+ * void
+ *
+ */
void (*set_ocsc_default)(struct mpc *mpc,
int opp_id,
enum dc_color_space color_space,
enum mpc_output_csc_mode ocsc_mode);
+ /**
+ * @set_output_gamma:
+ *
+ * Set Output Gamma with given curve parameters.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] mpcc_id - Corresponding MPC to update registers.
+ * - [in] params - Parameters.
+ *
+ * Return:
+ *
+ * void
+ *
+ */
void (*set_output_gamma)(
struct mpc *mpc,
int mpcc_id,
const struct pwl_params *params);
+ /**
+ * @power_on_mpc_mem_pwr:
+ *
+ * Power on/off memory LUT for given MPCC.
+ * Powering on enables LUT to be updated.
+ * Powering off allows entering low power mode.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] mpcc_id - MPCC to power on.
+ * - [in] power_on
+ *
+ * Return:
+ *
+ * void
+ */
void (*power_on_mpc_mem_pwr)(
struct mpc *mpc,
int mpcc_id,
bool power_on);
+ /**
+ * @set_dwb_mux:
+ *
+ * Set corresponding Display Writeback mux
+ * MPC register field to given MPCC id.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] dwb_id - DWB to be set.
+ * - [in] mpcc_id - MPCC id to be stored in DWB mux register.
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_dwb_mux)(
struct mpc *mpc,
int dwb_id,
int mpcc_id);
+ /**
+ * @disable_dwb_mux:
+ *
+ * Reset corresponding Display Writeback mux
+ * MPC register field.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] dwb_id - DWB to be set.
+ *
+ * Return:
+ *
+ * void
+ */
void (*disable_dwb_mux)(
struct mpc *mpc,
int dwb_id);
+ /**
+ * @is_dwb_idle:
+ *
+ * Check DWB status on MPC_DWB0_MUX_STATUS register field.
+ * Return if it is null.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] dwb_id - DWB to be checked.
+ *
+ * Return:
+ *
+ * bool - wheter DWB is idle or not
+ */
bool (*is_dwb_idle)(
struct mpc *mpc,
int dwb_id);
+ /**
+ * @set_out_rate_control:
+ *
+ * Set display output rate control.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] opp_id - OPP to be set.
+ * - [in] enable
+ * - [in] rate_2x_mode
+ * - [in] flow_control
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_out_rate_control)(
struct mpc *mpc,
int opp_id,
@@ -536,44 +782,261 @@ struct mpc_funcs {
bool rate_2x_mode,
struct mpc_dwb_flow_control *flow_control);
+ /**
+ * @set_gamut_remap:
+ *
+ * Set post-blending CTM for given MPCC.
+ *
+ * Parameters:
+ * - [in] mpc - MPC context.
+ * - [in] mpcc_id - MPCC to set gamut map.
+ * - [in] adjust
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_gamut_remap)(
struct mpc *mpc,
int mpcc_id,
const struct mpc_grph_gamut_adjustment *adjust);
+ /**
+ * @program_1dlut:
+ *
+ * Set 1 dimensional Lookup Table.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context
+ * - [in] params - curve parameters for the LUT configuration
+ * - [in] rmu_idx
+ *
+ * bool - wheter LUT was set (set with given parameters) or not (params is NULL and LUT is disabled).
+ */
bool (*program_1dlut)(
struct mpc *mpc,
const struct pwl_params *params,
uint32_t rmu_idx);
+ /**
+ * @program_shaper:
+ *
+ * Set shaper.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context
+ * - [in] params - curve parameters to be set
+ * - [in] rmu_idx
+ *
+ * Return:
+ *
+ * bool - wheter shaper was set (set with given parameters) or not (params is NULL and LUT is disabled).
+ */
bool (*program_shaper)(
struct mpc *mpc,
const struct pwl_params *params,
uint32_t rmu_idx);
+ /**
+ * @acquire_rmu:
+ *
+ * Set given MPCC to be multiplexed to given RMU unit.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context
+ * - [in] mpcc_id - MPCC
+ * - [in] rmu_idx - Given RMU unit to set MPCC to be multiplexed to.
+ *
+ * Return:
+ *
+ * unit32_t - rmu_idx if operation was successful, -1 else.
+ */
uint32_t (*acquire_rmu)(struct mpc *mpc, int mpcc_id, int rmu_idx);
+ /**
+ * @program_3dlut:
+ *
+ * Set 3 dimensional Lookup Table.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context
+ * - [in] params - tetrahedral parameters for the LUT configuration
+ * - [in] rmu_idx
+ *
+ * bool - wheter LUT was set (set with given parameters) or not (params is NULL and LUT is disabled).
+ */
bool (*program_3dlut)(
struct mpc *mpc,
const struct tetrahedral_params *params,
int rmu_idx);
+ /**
+ * @release_rmu:
+ *
+ * For a given MPCC, release the RMU unit it muliplexes to.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context
+ * - [in] mpcc_id - MPCC
+ *
+ * Return:
+ *
+ * int - a valid rmu_idx representing released RMU unit or -1 if there was no RMU unit to release.
+ */
int (*release_rmu)(struct mpc *mpc, int mpcc_id);
+ /**
+ * @get_mpc_out_mux:
+ *
+ * Return MPC out mux.
+ *
+ * Parameters:
+ * - [in] mpc - MPC context.
+ * - [in] opp_id - OPP
+ *
+ * Return:
+ *
+ * unsigned int - Out Mux
+ */
unsigned int (*get_mpc_out_mux)(
struct mpc *mpc,
int opp_id);
+ /**
+ * @set_bg_color:
+ *
+ * Find corresponding bottommost MPCC and
+ * set its bg color.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] bg_color - background color to be set.
+ * - [in] mpcc_id
+ *
+ * Return:
+ *
+ * void
+ */
void (*set_bg_color)(struct mpc *mpc,
struct tg_color *bg_color,
int mpcc_id);
+
+ /**
+ * @set_mpc_mem_lp_mode:
+ *
+ * Set mpc_mem_lp_mode.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ *
+ * Return:
+ *
+ * void
+ */
+
void (*set_mpc_mem_lp_mode)(struct mpc *mpc);
+ /**
+ * @set_movable_cm_location:
+ *
+ * Set Movable CM Location.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] location
+ * - [in] mpcc_id
+ *
+ * Return:
+ *
+ * void
+ */
+
void (*set_movable_cm_location)(struct mpc *mpc, enum mpcc_movable_cm_location location, int mpcc_id);
+ /**
+ * @update_3dlut_fast_load_select:
+ *
+ * Update 3D LUT fast load select.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] mpcc_id
+ * - [in] hubp_idx
+ *
+ * Return:
+ *
+ * void
+ */
+
void (*update_3dlut_fast_load_select)(struct mpc *mpc, int mpcc_id, int hubp_idx);
+ /**
+ * @get_3dlut_fast_load_status:
+ *
+ * Get 3D LUT fast load status and reference them with done, soft_underflow and hard_underflow pointers.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] mpcc_id
+ * - [in/out] done
+ * - [in/out] soft_underflow
+ * - [in/out] hard_underflow
+ *
+ * Return:
+ *
+ * void
+ */
void (*get_3dlut_fast_load_status)(struct mpc *mpc, int mpcc_id, uint32_t *done, uint32_t *soft_underflow, uint32_t *hard_underflow);
+
+ /**
+ * @populate_lut:
+ *
+ * Populate LUT with given tetrahedral parameters.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] id
+ * - [in] params
+ * - [in] lut_bank_a
+ * - [in] mpcc_id
+ *
+ * Return:
+ *
+ * void
+ */
void (*populate_lut)(struct mpc *mpc, const enum MCM_LUT_ID id, const union mcm_lut_params params,
bool lut_bank_a, int mpcc_id);
+
+ /**
+ * @program_lut_read_write_control:
+ *
+ * Program LUT RW control.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] id
+ * - [in] lut_bank_a
+ * - [in] mpcc_id
+ *
+ * Return:
+ *
+ * void
+ */
void (*program_lut_read_write_control)(struct mpc *mpc, const enum MCM_LUT_ID id, bool lut_bank_a, int mpcc_id);
+
+ /**
+ * @program_lut_mode:
+ *
+ * Program LUT mode.
+ *
+ * Parameters:
+ * - [in/out] mpc - MPC context.
+ * - [in] id
+ * - [in] xable
+ * - [in] lut_bank_a
+ * - [in] mpcc_id
+ *
+ * Return:
+ *
+ * void
+ */
void (*program_lut_mode)(struct mpc *mpc, const enum MCM_LUT_ID id, const enum MCM_LUT_XABLE xable,
bool lut_bank_a, int mpcc_id);
};
Fix most of the display documentation compile warnings by documenting struct mpc_funcs functions in dc/inc/hw/mpc.h file. Remove the following warnings: ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'read_mpcc_state' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'mpc_init_single_inst' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpcc_for_dpp_from_secondary' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpcc_for_dpp' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'wait_for_idle' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'assert_mpcc_idle_before_connect' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'init_mpcc_list_from_hw' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_denorm' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_denorm_clamp' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_output_csc' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_ocsc_default' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_output_gamma' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'power_on_mpc_mem_pwr' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_dwb_mux' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'disable_dwb_mux' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'is_dwb_idle' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_out_rate_control' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_gamut_remap' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_1dlut' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_shaper' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'acquire_rmu' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_3dlut' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'release_rmu' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpc_out_mux' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_bg_color' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_mpc_mem_lp_mode' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_movable_cm_location' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'update_3dlut_fast_load_select' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_3dlut_fast_load_status' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'populate_lut' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_lut_read_write_control' not described in 'mpc_funcs' ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_lut_mode' not described in 'mpc_funcs' Fixes: b8c1c3a82e75 ("Documentation/gpu: Add kernel doc entry for MPC") Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com> --- drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h | 689 ++++++++++++++++---- 1 file changed, 576 insertions(+), 113 deletions(-)