| Message ID | 20240516204031.171920-4-laurentiumihalcea111@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for imx8ulp's SIM | expand |
On Thu, 16 May 2024 23:40:30 +0300, Laurentiu Mihalcea wrote: > From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> > > Add schema for i.MX8ULP's SIM. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> > --- > .../bindings/mfd/nxp,imx8ulp-sim.yaml | 71 +++++++++++++++++++ > 1 file changed, 71 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/nxp,imx8ulp-sim-reset.example.dtb: syscon@2da50000: 'mux-controller' is a required property from schema $id: http://devicetree.org/schemas/mfd/nxp,imx8ulp-sim.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240516204031.171920-4-laurentiumihalcea111@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Thu, May 16, 2024 at 11:40:30PM +0300, Laurentiu Mihalcea wrote: > From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> > > Add schema for i.MX8ULP's SIM. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> > --- > .../bindings/mfd/nxp,imx8ulp-sim.yaml | 71 +++++++++++++++++++ > 1 file changed, 71 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml b/Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml > new file mode 100644 > index 000000000000..fbb17c06e3c0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml > @@ -0,0 +1,71 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/nxp,imx8ulp-sim.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP i.MX8ULP System Integration Module > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | Needn't "|" > + 8ULP's SIM provides control and configuration options for > + some of the chip's components. > + > +properties: > + compatible: > + items: > + - enum: > + - nxp,imx8ulp-avd-sim > + - const: syscon > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + mux-controller: > + $ref: ../mux/reg-mux.yaml > + > + reset-controller: > + $ref: ../reset/nxp,imx8ulp-sim-reset.yaml I think we directly use reset-ti-syscon.c > + > +required: > + - compatible > + - reg > + - clocks > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: nxp,imx8ulp-avd-sim > + then: > + required: > + - reset-controller > + - mux-controller > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8ulp-clock.h> > + syscon@2da50000 { > + compatible = "nxp,imx8ulp-avd-sim", "syscon"; > + reg = <0x2da50000 0x38>; > + clocks = <&pcc5 IMX8ULP_CLK_AVD_SIM>; > + > + mux-controller { > + compatible = "mmio-mux"; > + #mux-control-cells = <1>; > + mux-reg-masks = <0x8 0x00000200>; > + }; > + > + reset-controller { > + compatible = "nxp,imx8ulp-avd-sim-reset"; > + #reset-cells = <1>; > + }; > + }; > -- > 2.34.1 >
diff --git a/Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml b/Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml new file mode 100644 index 000000000000..fbb17c06e3c0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/nxp,imx8ulp-sim.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,imx8ulp-sim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8ULP System Integration Module + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + 8ULP's SIM provides control and configuration options for + some of the chip's components. + +properties: + compatible: + items: + - enum: + - nxp,imx8ulp-avd-sim + - const: syscon + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + mux-controller: + $ref: ../mux/reg-mux.yaml + + reset-controller: + $ref: ../reset/nxp,imx8ulp-sim-reset.yaml + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: nxp,imx8ulp-avd-sim + then: + required: + - reset-controller + - mux-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8ulp-clock.h> + syscon@2da50000 { + compatible = "nxp,imx8ulp-avd-sim", "syscon"; + reg = <0x2da50000 0x38>; + clocks = <&pcc5 IMX8ULP_CLK_AVD_SIM>; + + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x8 0x00000200>; + }; + + reset-controller { + compatible = "nxp,imx8ulp-avd-sim-reset"; + #reset-cells = <1>; + }; + };