diff mbox series

[v1,1/2] dt-bindings: usb: gpio-sbu-mux: Make 'enable-gpios' optional

Message ID 20240524071034.4441-2-francesco@dolcini.it (mailing list archive)
State Superseded
Headers show
Series usb: typec: mux: gpio-sbu: Make enable gpio optional | expand

Commit Message

Francesco Dolcini May 24, 2024, 7:10 a.m. UTC 
From: Francesco Dolcini <francesco.dolcini@toradex.com>

The enable gpio is not required when the SBU mux is used only for
orientation, make enable-gpios required only for alternate mode
switch use case.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Conor Dooley May 24, 2024, 6:31 p.m. UTC | #1 
On Fri, May 24, 2024 at 09:10:33AM +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> The enable gpio is not required when the SBU mux is used only for
> orientation, make enable-gpios required only for alternate mode
> switch use case.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index 88e1607cf053..30edcce82f97 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -44,13 +44,18 @@  properties:
 
 required:
   - compatible
-  - enable-gpios
   - select-gpios
   - orientation-switch
   - port
 
 allOf:
   - $ref: usb-switch.yaml#
+  - if:
+      required:
+        - mode-switch
+    then:
+      required:
+        - enable-gpios
 
 additionalProperties: false