@@ -27,6 +27,17 @@ union nac_cgu_dword9 {
u32 val;
};
+#define NAC_CGU_DWORD16_E825C 0x40
+union nac_cgu_dword16_e825c {
+ struct {
+ u32 synce_remndr : 6;
+ u32 synce_phlmt_en : 1;
+ u32 misc13 : 17;
+ u32 tspll_ck_refclkfreq : 8;
+ };
+ u32 val;
+};
+
#define NAC_CGU_DWORD19 0x4c
union nac_cgu_dword19 {
struct {
@@ -67,6 +78,22 @@ union nac_cgu_dword22 {
u32 val;
};
+#define NAC_CGU_DWORD23_E825C 0x5C
+union nac_cgu_dword23_e825c {
+ struct {
+ u32 cgupll_fbdiv_intgr : 10;
+ u32 ux56pll_fbdiv_intgr : 10;
+ u32 misc20 : 4;
+ u32 ts_pll_enable : 1;
+ u32 time_sync_tspll_align_sel : 1;
+ u32 ext_synce_sel : 1;
+ u32 ref1588_ck_div : 4;
+ u32 time_ref_sel : 1;
+
+ };
+ u32 val;
+};
+
#define NAC_CGU_DWORD24 0x60
union nac_cgu_dword24 {
struct {
@@ -113,4 +140,42 @@ union tspll_ro_bwm_lf {
u32 val;
};
+#define TSPLL_RO_LOCK_E825C 0x3f0
+union tspll_ro_lock_e825c {
+ struct {
+ u32 bw_freqov_high_cri_7_0 : 8;
+ u32 bw_freqov_high_cri_9_8 : 2;
+ u32 reserved455 : 1;
+ u32 plllock_gain_tran_cri : 1;
+ u32 plllock_true_lock_cri : 1;
+ u32 pllunlock_flag_cri : 1;
+ u32 afcerr_cri : 1;
+ u32 afcdone_cri : 1;
+ u32 feedfwrdgain_cal_cri_7_0 : 8;
+ u32 reserved462 : 8;
+ };
+ u32 val;
+};
+
+#define TSPLL_BW_TDC_E825C 0x31c
+union tspll_bw_tdc_e825c {
+ struct {
+ u32 i_tdc_offset_lock_1_0 : 2;
+ u32 i_bbthresh1_2_0 : 3;
+ u32 i_bbthresh2_2_0 : 3;
+ u32 i_tdcsel_1_0 : 2;
+ u32 i_tdcovccorr_en_h : 1;
+ u32 i_divretimeren : 1;
+ u32 i_bw_ampmeas_window : 1;
+ u32 i_bw_lowerbound_2_0 : 3;
+ u32 i_bw_upperbound_2_0 : 3;
+ u32 i_bw_mode_1_0 : 2;
+ u32 i_ft_mode_sel_2_0 : 3;
+ u32 i_bwphase_4_0 : 5;
+ u32 i_plllock_sel_1_0 : 2;
+ u32 i_afc_divratio : 1;
+ };
+ u32 val;
+};
+
#endif /* _ICE_CGU_REGS_H_ */
@@ -2309,8 +2309,13 @@ ice_parse_1588_func_caps(struct ice_hw *hw, struct ice_hw_func_caps *func_p,
info->tmr_index_owned = ((number & ICE_TS_TMR_IDX_OWND_M) != 0);
info->tmr_index_assoc = ((number & ICE_TS_TMR_IDX_ASSOC_M) != 0);
- info->clk_freq = FIELD_GET(ICE_TS_CLK_FREQ_M, number);
- info->clk_src = ((number & ICE_TS_CLK_SRC_M) != 0);
+ if (!ice_is_e825c(hw)) {
+ info->clk_freq = FIELD_GET(ICE_TS_CLK_FREQ_M, number);
+ info->clk_src = ((number & ICE_TS_CLK_SRC_M) != 0);
+ } else {
+ info->clk_freq = ICE_TIME_REF_FREQ_156_250;
+ info->clk_src = ICE_CLK_SRC_TCXO;
+ }
if (info->clk_freq < NUM_ICE_TIME_REF_FREQ) {
info->time_ref = (enum ice_time_ref_freq)info->clk_freq;
@@ -470,6 +470,93 @@ const struct ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ] = {
},
};
+const
+struct ice_cgu_pll_params_e825c e825c_cgu_params[NUM_ICE_TIME_REF_FREQ] = {
+ /* ICE_TIME_REF_FREQ_25_000 -> 25 MHz */
+ {
+ /* tspll_ck_refclkfreq */
+ 0x19,
+ /* tspll_ndivratio */
+ 1,
+ /* tspll_fbdiv_intgr */
+ 320,
+ /* tspll_fbdiv_frac */
+ 0,
+ /* ref1588_ck_div */
+ 0,
+ },
+
+ /* ICE_TIME_REF_FREQ_122_880 -> 122.88 MHz */
+ {
+ /* tspll_ck_refclkfreq */
+ 0x29,
+ /* tspll_ndivratio */
+ 3,
+ /* tspll_fbdiv_intgr */
+ 195,
+ /* tspll_fbdiv_frac */
+ 1342177280UL,
+ /* ref1588_ck_div */
+ 0,
+ },
+
+ /* ICE_TIME_REF_FREQ_125_000 -> 125 MHz */
+ {
+ /* tspll_ck_refclkfreq */
+ 0x3E,
+ /* tspll_ndivratio */
+ 2,
+ /* tspll_fbdiv_intgr */
+ 128,
+ /* tspll_fbdiv_frac */
+ 0,
+ /* ref1588_ck_div */
+ 0,
+ },
+
+ /* ICE_TIME_REF_FREQ_153_600 -> 153.6 MHz */
+ {
+ /* tspll_ck_refclkfreq */
+ 0x33,
+ /* tspll_ndivratio */
+ 3,
+ /* tspll_fbdiv_intgr */
+ 156,
+ /* tspll_fbdiv_frac */
+ 1073741824UL,
+ /* ref1588_ck_div */
+ 0,
+ },
+
+ /* ICE_TIME_REF_FREQ_156_250 -> 156.25 MHz */
+ {
+ /* tspll_ck_refclkfreq */
+ 0x1F,
+ /* tspll_ndivratio */
+ 5,
+ /* tspll_fbdiv_intgr */
+ 256,
+ /* tspll_fbdiv_frac */
+ 0,
+ /* ref1588_ck_div */
+ 0,
+ },
+
+ /* ICE_TIME_REF_FREQ_245_760 -> 245.76 MHz */
+ {
+ /* tspll_ck_refclkfreq */
+ 0x52,
+ /* tspll_ndivratio */
+ 3,
+ /* tspll_fbdiv_intgr */
+ 97,
+ /* tspll_fbdiv_frac */
+ 2818572288UL,
+ /* ref1588_ck_div */
+ 0,
+ },
+};
+
/* struct ice_vernier_info_e82x
*
* E822 hardware calibrates the delay of the timestamp indication from the
@@ -325,8 +325,8 @@ static const char *ice_clk_freq_str(enum ice_time_ref_freq clk_freq)
static const char *ice_clk_src_str(enum ice_clk_src clk_src)
{
switch (clk_src) {
- case ICE_CLK_SRC_TCX0:
- return "TCX0";
+ case ICE_CLK_SRC_TCXO:
+ return "TCXO";
case ICE_CLK_SRC_TIME_REF:
return "TIME_REF";
default:
@@ -338,7 +338,7 @@ static const char *ice_clk_src_str(enum ice_clk_src clk_src)
* ice_cfg_cgu_pll_e82x - Configure the Clock Generation Unit
* @hw: pointer to the HW struct
* @clk_freq: Clock frequency to program
- * @clk_src: Clock source to select (TIME_REF, or TCX0)
+ * @clk_src: Clock source to select (TIME_REF, or TCXO)
*
* Configure the Clock Generation Unit with the desired clock frequency and
* time reference, enabling the PLL which drives the PTP hardware clock.
@@ -372,10 +372,10 @@ static int ice_cfg_cgu_pll_e82x(struct ice_hw *hw,
return -EINVAL;
}
- if (clk_src == ICE_CLK_SRC_TCX0 &&
+ if (clk_src == ICE_CLK_SRC_TCXO &&
clk_freq != ICE_TIME_REF_FREQ_25_000) {
dev_warn(ice_hw_to_dev(hw),
- "TCX0 only supports 25 MHz frequency\n");
+ "TCXO only supports 25 MHz frequency\n");
return -EINVAL;
}
@@ -480,16 +480,198 @@ static int ice_cfg_cgu_pll_e82x(struct ice_hw *hw,
}
/**
- * ice_init_cgu_e82x - Initialize CGU with settings from firmware
- * @hw: pointer to the HW structure
+ * ice_cfg_cgu_pll_e825c - Configure the Clock Generation Unit for E825-C
+ * @hw: pointer to the HW struct
+ * @clk_freq: Clock frequency to program
+ * @clk_src: Clock source to select (TIME_REF, or TCXO)
*
- * Initialize the Clock Generation Unit of the E822 device.
+ * Configure the Clock Generation Unit with the desired clock frequency and
+ * time reference, enabling the PLL which drives the PTP hardware clock.
*
- * Return: 0 on success, other error codes when failed to read/write/cfg CGU
+ * Return:
+ * * %0 - success
+ * * %-EINVAL - input parameters are incorrect
+ * * %-EBUSY - failed to lock TS PLL
+ * * %other - CGU read/write failure
*/
-static int ice_init_cgu_e82x(struct ice_hw *hw)
+static int ice_cfg_cgu_pll_e825c(struct ice_hw *hw,
+ enum ice_time_ref_freq clk_freq,
+ enum ice_clk_src clk_src)
+{
+ union tspll_ro_lock_e825c ro_lock;
+ union nac_cgu_dword16_e825c dw16;
+ union nac_cgu_dword23_e825c dw23;
+ union nac_cgu_dword19 dw19;
+ union nac_cgu_dword22 dw22;
+ union nac_cgu_dword24 dw24;
+ union nac_cgu_dword9 dw9;
+ int err;
+
+ if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
+ dev_warn(ice_hw_to_dev(hw), "Invalid TIME_REF frequency %u\n",
+ clk_freq);
+ return -EINVAL;
+ }
+
+ if (clk_src >= NUM_ICE_CLK_SRC) {
+ dev_warn(ice_hw_to_dev(hw), "Invalid clock source %u\n",
+ clk_src);
+ return -EINVAL;
+ }
+
+ if (clk_src == ICE_CLK_SRC_TCXO &&
+ clk_freq != ICE_TIME_REF_FREQ_156_250) {
+ dev_warn(ice_hw_to_dev(hw),
+ "TCXO only supports 156.25 MHz frequency\n");
+ return -EINVAL;
+ }
+
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD9, &dw9.val);
+ if (err)
+ return err;
+
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
+ if (err)
+ return err;
+
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD16_E825C, &dw16.val);
+ if (err)
+ return err;
+
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, &dw23.val);
+ if (err)
+ return err;
+
+ err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_LOCK_E825C, &ro_lock.val);
+ if (err)
+ return err;
+
+ /* Log the current clock configuration */
+ ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+ dw24.ts_pll_enable ? "enabled" : "disabled",
+ ice_clk_src_str(dw23.time_ref_sel),
+ ice_clk_freq_str(dw9.time_ref_freq_sel),
+ ro_lock.plllock_true_lock_cri ? "locked" : "unlocked");
+
+ /* Disable the PLL before changing the clock source or frequency */
+ if (dw23.ts_pll_enable) {
+ dw23.ts_pll_enable = 0;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C,
+ dw23.val);
+ if (err)
+ return err;
+ }
+
+ /* Set the frequency */
+ dw9.time_ref_freq_sel = clk_freq;
+
+ /* Enable the correct receiver */
+ if (clk_src == ICE_CLK_SRC_TCXO) {
+ dw9.time_ref_en = 0;
+ dw9.clk_eref0_en = 1;
+ } else {
+ dw9.time_ref_en = 1;
+ dw9.clk_eref0_en = 0;
+ }
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD9, dw9.val);
+ if (err)
+ return err;
+
+ /* Choose the referenced frequency */
+ dw16.tspll_ck_refclkfreq =
+ e825c_cgu_params[clk_freq].tspll_ck_refclkfreq;
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD16_E825C, dw16.val);
+ if (err)
+ return err;
+
+ /* Configure the TS PLL feedback divisor */
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD19, &dw19.val);
+ if (err)
+ return err;
+
+ dw19.tspll_fbdiv_intgr =
+ e825c_cgu_params[clk_freq].tspll_fbdiv_intgr;
+ dw19.tspll_ndivratio =
+ e825c_cgu_params[clk_freq].tspll_ndivratio;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD19, dw19.val);
+ if (err)
+ return err;
+
+ /* Configure the TS PLL post divisor */
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD22, &dw22.val);
+ if (err)
+ return err;
+
+ /* These two are constant for E825C */
+ dw22.time1588clk_div = 5;
+ dw22.time1588clk_sel_div2 = 0;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD22, dw22.val);
+ if (err)
+ return err;
+
+ /* Configure the TS PLL pre divisor and clock source */
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, &dw23.val);
+ if (err)
+ return err;
+
+ dw23.ref1588_ck_div =
+ e825c_cgu_params[clk_freq].ref1588_ck_div;
+ dw23.time_ref_sel = clk_src;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, dw23.val);
+ if (err)
+ return err;
+
+ dw24.tspll_fbdiv_frac =
+ e825c_cgu_params[clk_freq].tspll_fbdiv_frac;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+ if (err)
+ return err;
+
+ /* Finally, enable the PLL */
+ dw23.ts_pll_enable = 1;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, dw23.val);
+ if (err)
+ return err;
+
+ /* Wait to verify if the PLL locks */
+ usleep_range(1000, 5000);
+
+ err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_LOCK_E825C, &ro_lock.val);
+ if (err)
+ return err;
+
+ if (!ro_lock.plllock_true_lock_cri) {
+ dev_warn(ice_hw_to_dev(hw), "CGU PLL failed to lock\n");
+ return -EBUSY;
+ }
+
+ /* Log the current clock configuration */
+ ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+ dw24.ts_pll_enable ? "enabled" : "disabled",
+ ice_clk_src_str(dw23.time_ref_sel),
+ ice_clk_freq_str(dw9.time_ref_freq_sel),
+ ro_lock.plllock_true_lock_cri ? "locked" : "unlocked");
+
+ return 0;
+}
+
+/**
+ * ice_cfg_cgu_pll_dis_sticky_bits_e82x - disable TS PLL sticky bits
+ * @hw: pointer to the HW struct
+ *
+ * Configure the Clock Generation Unit TS PLL sticky bits so they don't latch on
+ * losing TS PLL lock, but always show current state.
+ *
+ * Return: 0 on success, other error codes when failed to read/write CGU
+ */
+static int ice_cfg_cgu_pll_dis_sticky_bits_e82x(struct ice_hw *hw)
{
- struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
union tspll_cntr_bist_settings cntr_bist;
int err;
@@ -502,16 +684,65 @@ static int ice_init_cgu_e82x(struct ice_hw *hw)
cntr_bist.i_plllock_sel_0 = 0;
cntr_bist.i_plllock_sel_1 = 0;
- err = ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
- cntr_bist.val);
+ return ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
+ cntr_bist.val);
+}
+
+/**
+ * ice_cfg_cgu_pll_dis_sticky_bits_e825c - disable TS PLL sticky bits for E825-C
+ * @hw: pointer to the HW struct
+ *
+ * Configure the Clock Generation Unit TS PLL sticky bits so they don't latch on
+ * losing TS PLL lock, but always show current state.
+ *
+ * Return: 0 on success, other error codes when failed to read/write CGU
+ */
+static int ice_cfg_cgu_pll_dis_sticky_bits_e825c(struct ice_hw *hw)
+{
+ union tspll_bw_tdc_e825c bw_tdc;
+ int err;
+
+ err = ice_read_cgu_reg_e82x(hw, TSPLL_BW_TDC_E825C, &bw_tdc.val);
+ if (err)
+ return err;
+
+ bw_tdc.i_plllock_sel_1_0 = 0;
+
+ return ice_write_cgu_reg_e82x(hw, TSPLL_BW_TDC_E825C, bw_tdc.val);
+}
+
+/**
+ * ice_init_cgu_e82x - Initialize CGU with settings from firmware
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the Clock Generation Unit of the E822 device.
+ *
+ * Return: 0 on success, other error codes when failed to read/write/cfg CGU
+ */
+static int ice_init_cgu_e82x(struct ice_hw *hw)
+{
+ struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
+ int err;
+
+ /* Disable sticky lock detection so lock err reported is accurate */
+ if (ice_is_e825c(hw))
+ err = ice_cfg_cgu_pll_dis_sticky_bits_e825c(hw);
+ else
+ err = ice_cfg_cgu_pll_dis_sticky_bits_e82x(hw);
if (err)
return err;
/* Configure the CGU PLL using the parameters from the function
* capabilities.
*/
- return ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
- (enum ice_clk_src)ts_info->clk_src);
+ if (ice_is_e825c(hw))
+ err = ice_cfg_cgu_pll_e825c(hw, ts_info->time_ref,
+ (enum ice_clk_src)ts_info->clk_src);
+ else
+ err = ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
+ (enum ice_clk_src)ts_info->clk_src);
+
+ return err;
}
/**
@@ -197,7 +197,7 @@ extern
const struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD];
/**
- * struct ice_cgu_pll_params_e82x
+ * struct ice_cgu_pll_params_e82x - E82X CGU parameters
* @refclk_pre_div: Reference clock pre-divisor
* @feedback_div: Feedback divisor
* @frac_n_div: Fractional divisor
@@ -287,6 +287,28 @@ struct ice_cgu_pin_desc {
extern const struct
ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ];
+/**
+ * struct ice_cgu_pll_params_e825c - E825C CGU parameters
+ * @tspll_ck_refclkfreq: tspll_ck_refclkfreq selection
+ * @tspll_ndivratio: ndiv ratio that goes directly to the pll
+ * @tspll_fbdiv_intgr: TS PLL integer feedback divide
+ * @tspll_fbdiv_frac: TS PLL fractional feedback divide
+ * @ref1588_ck_div: clock divider for tspll ref
+ *
+ * Clock Generation Unit parameters used to program the PLL based on the
+ * selected TIME_REF/TCXO frequency.
+ */
+struct ice_cgu_pll_params_e825c {
+ u32 tspll_ck_refclkfreq;
+ u32 tspll_ndivratio;
+ u32 tspll_fbdiv_intgr;
+ u32 tspll_fbdiv_frac;
+ u32 ref1588_ck_div;
+};
+
+extern const struct
+ice_cgu_pll_params_e825c e825c_cgu_params[NUM_ICE_TIME_REF_FREQ];
+
#define E810C_QSFP_C827_0_HANDLE 2
#define E810C_QSFP_C827_1_HANDLE 3
@@ -328,7 +328,7 @@ enum ice_time_ref_freq {
/* Clock source specification */
enum ice_clk_src {
- ICE_CLK_SRC_TCX0 = 0, /* Temperature compensated oscillator */
+ ICE_CLK_SRC_TCXO = 0, /* Temperature compensated oscillator */
ICE_CLK_SRC_TIME_REF = 1, /* Use TIME_REF reference clock */
NUM_ICE_CLK_SRC